133,801 used machines on RESALE, but how to find them? Machine Search
Transport with incline conveyor straight line length 8100 mm with incline conveyor length 1900 mm Currently conveys to a height of 1050 mm, but can be adjusted in pitch. Conveyor belt width 520 mm Total width 900 mm
Used KRONES 32.000 bph one-way PET filling line Former products: Carbonised water, CSD, energy drinks Scope of machines: NEA high-pressure compressor (approx. 9,000 operating hours) NEA high-pressure compressor (approx. 18,000 operating hours) 2001 LOHENNER compressed air tank 5,000 Ltr. 2001 MTA RWD350C dry recooler (roof / outdoor installation) 2001/2002 MUCKI MD-3 preform feeder with tipper with 500 kg load capacity 2001/2001 TANNER SBT-2212 preform hopper with unscrambler 2001/2001 TANNER HFT-3510 preform vertical conveyor 2001/2001 TANNER preform sorter incl. ejection unit 2001/2001 TANNER AST-3006 preform slide incl. air rinser 2001/2001 TANNER VZT-2500 electrical cabinet 2001/2001 SIG COROPLAST BLOWMAX 12 stretch blow molding machine, max. 18,000 bph - (One blowing machine must be replaced!) 2001/2001 RIEDEL PC 630.01-NE preform cooler 20 ...
Key data: 80 liter
Qty 1 x Farrel Pomini model F80 banbury mixer, Serial number: 82/92, Original year 1981, but overhauled in 2011, Standard 2 wing rotors, FYH dust seals, Pneumatic hopper, Hydraulic drop door, Unidrive gearbox, 250HP fixed speed AC motor and starter, Rotor speed 35rpm, Upgraded operator controls (new in 2011). Complete with hydraulic unit and lubrication system. In good working condition.
Key data: 160 liter
Qty 1 x Carter MK6 banbury internal mixer, Original year of manufacture 1995, New body 2012, Mixing chamber volume: 160L, Batch size: approx 150kg, Pneumatic hopper, 2 wing tangential rotors, S.S.A type dust stops, Hydraulic drop door discharge with linear actuator and spade latch, Pneumatic hopper, David Brown Semi-unidrive gearbox (1300rpm input, 50.4rpm output). Gearbox ratio 25.8:1, Power Rating 600kW. Complete with hydraulic powerpack and lubrication unit. Only used for softer compounds and in good condition. Currently without motor or electrical controls (can be quoted if required).
9 Removable 21 Shelf Racks Auction-ID: A1-45803-5
ribloc (rinser-filler-capper), pressure filler, isobaric, with vacuum pump pre-evacuation, manufacturer: Cime Careddu Italy, type DPS 12-12-1, 12 rinser nozzles, 12 filling valves, 1 head crown cap, year of manufacture: 2007, with height adjustment, set up for current bottles 330 ml + 500 ml + 750 ml 0.33 + 0.50 + 0.75 Tribloc (Rinser-Filler-Crowner), counter pressure, isobaric, with vacuum pump, pre-evacuation, Made by: Cime Careddu Italy, Type: DPS 12-12-1, 12 head rinser nozzles , 12 filling valves, 1 head crown corker, Year: 2007, with hight adjustment, adjusted to bottle 330ml + 500ml + 750ml 0,33 0,50 0,75
intermediate table GUK ZT 520; cleaned and tested; Working width 520mm; height-adjustable; Speed adjustable; suitable for connection to GUK folding machines. Intermediate transport table GUK ZT 520; cleaned and checked; working width 520mm; adjustable in hight; adjustable in speed; used for GUK folding machines.
Injector Manufacturer: Gunther Model: PI 52 Number of needles: 52 Needle diameter: 4 mm Tact per minute: 15 to 55 tact/min. Product passage height: 220 mm
Robotic TIG Welding Cell Equipment: Rotatable Welding Table – with two interchangeable frames KUKA KR6 R1820 industrial robot arm Year of manufacture: 2018 Serial number: 425602 Weight: 168 kg Max. Load capacity: 6 kg Reach: 1820mm KUKA KR C4 smallsize-2 controller / controller Year of manufacture: 2018 Serial number: 380929 Weight: 123 kg TIG Dinse DIX TIG 350 AC/DC Welding Machine Serial number: 19840519 TEKA Caremaster BIA welding fume extraction equipment (2 pcs.) Capacity: 2200 m³/h Connection Parameters: 400V / 50Hz / 2.5A Power: 1.1KW Weight: 125kg/pc Year of manufacture: 2008 6-section steel cabinet Equipped with additional accessories
Model: KXS7522AVCLE For technical data, see photo. System has few operating hours as it is only used for comparison tests. Subject to prior sale - errors possible! Internal reference number: D-1192
Transnorm Rising falling Incline belt conveyor GF 7750-600-500 RA2054 Technical data: Conveyor length (NL): 7750 mm (4150 mm + 3600 mm) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor, R32DT71D4BMG Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1998 condition: good (used) Conveying length in mm: 7750 Nominal / outs ...
PLC control, digital output, digital input, digital input module -Manufacturer: B&R, Digital input module with bus module -Type: X20 DI 837 -Bus module: X20 BM 11 -Number: 2 modules available -Price: per piece -Dimensions: 100/20/H75 mm -Weight: 0.1 kg/pc.
FAG measuring instruments: PG-20/E-F, No. 15863 No.256 If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.
Key data: 22 kN
Awaiting refurbishment at our headquarters in Northamptonshire is this BOY 22M injection moulding machine. Any machines awaiting refurbishment with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing mac ...
GEA Intercooler 34/17/6+9/4+6-VSv-S79-16xxx Spare part from 2011, Manufacturer: GEA Model No.: 34/17/6+9/4+6-VSv-S79-16xxx Type: Intercooler Serial Number: 20012129/20 Ab. Overpressure [bar]: 2 / 2.4 Ab. Temperature 10-90 / 0-165 Year of Make: 2011
Key data: 750 kN, 40 mm
Engel - Injection Molding Machine e - Max - 310/75 ( No.:1 ) -Electric - Year of construction: 2009 - With special accessories: Crane: 1000 kg - Screw: 40 – diameter - Actual shot value: 40,069,660 pcs. - Operating hours: 105,347 h – In automatic: 63,211 h - Control: LC-200 - Screen: 15 – inches - Clamping force: 750 KN - Mold plate size: 560 mm x 600 mm - Weight: 4,400 kg - Sales from location: Germany
SKF TIH 070m/230V Induction Heater Auction-ID: A1-45977-289
Key data: 750 kN, 35 mm
Engel - Injection moulding machine e - Max - 310/75 ( No.:2 ) -Electric - Year of construction: 2009 - With special accessories: Crane: 1000 kg - Screw: 35 – diameter - Actual shot value: 34,527,644 pcs. - Operating hours: 98,349 h – In automatic: 54612 h - Control: LC-200 - Screen: 15 – inches - Clamping force: 750 KN - Mold plate size: 560 mm x 600 mm - Weight: 4,400 kg - Sales from location: Germany
Key data: 750 kN, 35 mm
Engel - Injection moulding machine e - Max - 310/75 ( No.:3 ) -Electric - Year of construction: 2009 - With special accessories: Crane: 1000 kg - Screw: 35 – diameter - Actual shot value: 41,658,321 pcs. - Operating hours: 103,302 h – In automatic: 65,611 h - Control: LC-200 - Screen: 15 – inches - Clamping force: 750 KN - Mold plate size: 560 mm x 600 mm - Weight: 4,400 kg - Sales from location: Germany
Key data: 750 kN, 35 mm
Engel - Injection moulding machine e - Max - 310/75 ( No.:4 ) -Electric - Year of construction: 2009 - With special accessories: Crane: 1000 kg - Screw: 35 – diameter - Actual shot value: 42,349,940 pcs. - Operating hours: 100,778 h – In automatic: 67,929 h - Control: LC-200 - Screen: 15 – inches - Clamping force: 750 KN - Mold plate size: 560 mm x 600 mm - Weight: 4,400 kg - Sales from location: Germany
Machine Type: Pulse Arc Inverter Welding Machine Make MERKLE Type HighPULSE 452 DW Plant No.: 93.828 Connection voltage 3 x 400 volts Adjustment range 20 – 450 amps Duty cycle 50% ED at 450 amps 60% ED at 400 amps 100% ED at 330 amps Current adjustment infinitely variable Cooling inverter through built-in fan Cooling burner water-cooled Design of mobile industrial plant with separate DV case and 1.6 mtr. long VB cable Wire feeder 4-roller drive DV 26 Fuse 32 Amps Dimensions L x W x H 1,100 x 490 x 1,000 mm Weight 140 kg Age 10 years Condition workshop tested very good incl. UVV test report Scope of supply welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 4 mtr. long 1 piece pressure reducer with 2 pressure gauges 1 piece spare parts box complete Equipped 18 months w ...
Product number: 3014 Belt width: 400 mm Infeed height: 770 mm Outfeed height: 1320 mm Pitch: 400 mm Dividers: 80 mm Power: 3 x 400V, 50Hz, 0.3kW Dimensions: 2000 x 600 x 1600 mm
LHS Lagertechnik. NEW AND USED SHELVING SYSTEMS OF ALL KINDS. On 20,000m² - Pallet racks - Multi-storey stages - Shelving racks - Cantilever racks - Tire racks - Packing tables - and much more Various manufacturers in different sizes and lengths immediately available from stock Kaarst Manufacturer examples: Jungheinrich, Bito, Meta, Thyssen, Stow, SLP, Dexion, Galler, Schäfer, ! Currently over 10,000 pallet spaces IMMEDIATELY available We will be happy to make you an individual offer tailored to your needs (lengths / heights / loads). Demand and system determination of existing systems is also possible. The indicated price serves as a guideline for used goods and refers to gross per parking space incl. 19% VAT. Purchase / assembly and disassembly / rack inspections can also be offered. ! Do not hesitate to contact us !
Intermediate dough chamber Intermediate chamber for resting (rising) the test after its shaping They are characterized by high-quality workmanship and maximum reliability Also, all models are mobile Rest time: 6.5 minutes Capacity: 1800 - 2000 pcs/h Number of vessels: 238 Container capacity: 100 - 1500 gr Dimensions: 1700 x 1700 x 2200 mm Dough inlet height: 930 ± 20 Dough outlet height: 1050 ± 100 Electrical power: 0.55 kW Machine weight: 700 kg
For sale is a high-quality industrial picking crane from the manufacturer VETTEN Krane & Service GmbH, specially developed for the efficient storage and picking of long goods such as steel pipes, steel bars and other elongated goods. This particular model was made in 2016 and is in excellent condition. It is ideally suited for the fully automated handling of long materials in industrial environments such as warehouses, production facilities and logistics centres. Technical details: - Manufacturer: VETTEN Krane & Service GmbH - Year of construction: 2016 - Type designation: ZLK 5tx23550 S - Load capacity: 10 tons - Net weight: 36 tons - Factory number: 16-215302 Features and Benefits: - Efficient material handling: significant time savings and efficient use of storage capacity - Automated processes: fully automatic handling of long goods, reduction of personnel costs, increa ...
turning diameter: mm turning length: mm control: 0 total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Battenfeld HM 500/3400 Clamping force: 500t Year of construction: 2007 Shot capacity: 1937g Injection unit .../3400 Screw diameter: 85 mm Injection pressure: 1574 bar Shot capacity: 1937 g L/D ratio: 22 Clamping unit 500/... Clamping force: 500 t Plate size: 1590 x 1470 mm Distance between tie bars: 1000 x 800 mm Max. plate spacing: 1600 mm Weight: 25000 kg Equipment: -1 x air valve -2 x core pull on the closing side, NW 6 -Interface for robot according to EUROMAP 67 -Integrated temperature control for the feed zone -Core pull movement and parallel ejection via DFEE auxiliary pump -Wear- and corrosion-protected plasticizing unit package -Potential-free contact parallel to the dosing unit
For sale are intercoolers from a Mitsubishi S6R. The coolers were subjected to a test run ex works. When they arrived at our place, they were dismantled and stored. Traces of storage available Condition: as good as new (test run ex works) Model: 1A17031D Part Number: 37555-11200 Suitable for: S12R S6R S6R2
VSG insulated glass and laminated glass pane production line used Manufacturer: LISEC Type: SIRI Year: 1996 The line includes glass grinding line, washing line, drying and gluing line for making laminated glass and insulated glass panes Total dimensions of the line approx. 24 x 3.5 x 3.1 m; Plant is dismantled Changes and errors in the technical data, specifications and prices as well as prior sale reserved.
VSG insulated glass and laminated glass pane production line used Manufacturer: LISEC Type: SIRI Year: 1996 max pane height approx. 230 cm Total dimensions of the line approx. 12 x 1.2 x 4.4 m; Plant is dismantled Changes and errors in the technical data, specifications and prices as well as prior sale reserved.
B&A REF: 8759 TON: 200 SHOT WEIGHT: 297 SCREW DIAMETER: 50MM STROKE VOLUME: 353CM3 INJECTION PRESSURE: 2050AR PLATEN SIZES: 795 X 795MM DBTB: 570 X 570MM MIN MOULD HEIGHT: 300MM MOULD OPENING STROKE: 650MM MAX DAYLIGHT: 950MM EJECTOR STROKE: 225MM CONTROLS: SELOGICA AIR VALVES: 1 MOTOR: 30 HEATING CAPACITY: 12KW SCREW DRIVE: ELECTRIC
maximum number of results exceeded
please refine your search
250 € 
