130,507 used machines on RESALE, but how to find them? Machine Search
MEMMERT ICO150 Incubator/Co2 Oven Equipment in new condition, never used. MEMMERT Part Number: ICO150 Year of Manufacture: 2023 Forced convection Volume: 156 liters Stainless steel chamber Display with wide display Temperature: amb + 5 °C up to + 50 °C IR probe CO₂: 0 to 20% 1 stainless steel water tray included per incubator Visual and audible alarms Sterilization at 180 °C without the need to remove the probes Dimensions W x D x H int.: 719 x 591 x 1066 mm Dimensions W x D x H ext.: 560 x 400 x 700 mm Temperature: ambient + 5 to 50 °C Weight: 92 kg Gross weight: 116 kg Slightly deformed side plate (see photo) This does not hinder the proper functioning of this equipment in any way
100 pieces of inserts NEW consisting of: 40 pieces TPKN2204 for steel 40 pieces TPKN2204 for stainless steel 20 pieces TPKN2204 CERMET The composition of the set can be changed on request. Please let us know the desired radius when ordering.
THERMO SCIENTIFIC 8000 WJ CO2 Incubator / Oven Water Jacket Technology (WJ) Model 3429 Capacity: 184L CO² range: 0 to 20% CO² inlet pressure: 103.4 kPa. CO₂ sensor: CT Temperature range: +5°C UT to +50°C. HEPA filter inside. Glazed interior door. Aluminum control panel with digital display. 4 stainless steel shelves 1 container of water External dimensions HxWxD: 100x66x60cm. Interior dimensions HxWxD: 68.1 x 54.1 x 50.8 cm. 230V 50/60Hz. Net Weight: 120.2 kg Equipment tested at 37°C with a CO2 level of 5% In excellent working order and aesthetics Slight rust marks on the back of the outer shell (see photos) HEPA filters will need to be replaced The equipment will be delivered with the water jackets emptied. It is imperative to fill them in before you can use the equipment according to the manufacturer's recommendations Year of Manufacture: 2009
100 pieces of inserts NEW consisting of: 40 pieces SPKN1203 for steel 40 pieces SPKN1203 for stainless steel 20 pieces SPKN1203 CERMET The composition of the set can be changed on request. Please let us know the desired radius when ordering.
Used proofing interrupter HEIN, type: Topline -In bakery condition- - new refrigerant 2022 - in operation until the end - Sale by closing the bakery - Plant still assembled Viewing possible.
100 pieces of inserts NEW consisting of: 30 pieces CCMT09T304 for steel 30 pieces CCMT09T304 for stainless steel 20 pieces CCMT09T304 for aluminum 20 pieces CCMT09T304 CERMET The composition of the set can be changed on request. Please let us know the desired radius when ordering.
FANUC LR Mate 100i Industrial Robot For sale is a FANUC industrial robot of the type LR Mate 100i with the item number A05B-1134-B551 and the servo motor A06B-0113-B075#0008. Technical details: Manufacturer: FANUC Model: LR Mate 100i Item number robot: A05B-1134-B551 Servo motor: A06B-0113-B075#0008 Robot type: 6-axis industrial robot Design: High Speed Design: Compact robot Application: Automation, assembly, handling, machine assembly Condition: Used The robot comes from industrial dismantling. Optical signs of wear may be present, see pictures. Buy industrial robots and other items at low prices – Here you can buy goods from professionals for professionals – In our SHOP you will find more attractive offers.
For sale I offer a pneumatic wrench/impact wrench RAMI Yokota MI3800PR 1 inch from 2019. The pneumatic wrench has been used before and shows signs of wear corresponding to its age. Further condition please see the pictures. Dates: -Impact wrenches for industrial applications -Used -Year of construction: 2019 -Drive square: 1" -Air consumption: 15l/s -Torque: 2100Nm -Operating pressure: 6.3bar -Impact mechanism: closed hammer -Metal housing -Weight 9.3Kg Shipping available for an extra charge. The pneumatic wrench is sold workshop-tested and immediately ready for use with a new UVV test. # Impact Wrench # Pneumatic Wrench # Pneumatic Impact Wrench # RAMI Yokota # Toku # MI3800 # 1inch # 1"
Ersatzteile für Spritzgießmaschinen Arburg, Demag, Krauss Maffei, Battenfeld, Ferromatik, Boy, Engel Die Teile sind 100 % original und funktionsfähig und vor allem deutlich günstiger als Neuteile Proportionalventile Moog Proportional Moog Moog Proportional Valves Moog No. D662Z2768D Type F02HX3MGNEA2 Moog No. D061-7000D Type J15H08MEVAR Moog No. D662Z2768D Type F02HX8MGNEA2 Moog No. D061-7000D Moog No. D662Z4704 Type D02HXBM5NEA2-M Moog Nr. D061-9330 Type J15K0BM4HM1 Moog SN. 114995 No. D661Z736A Type D80HX3MGN0A0 Moog SN. 200539 No. D681Z4707B Type P80HXUR5VEA2-X Moog Nr. D633-7330 Type A02KO4F0VXY
For sale I offer a pneumatic wrench RAMI Yokota MI17MG 1/2 inch from 2019. The pneumatic wrench is an unused display piece with slight traces of storage. Further condition please see the pictures. Dates: -Impact wrenches for professional use in workshops. -New/Exhibit -Year of construction: 2019 -Drive square: 1/2" -Air consumption: 7.4l/s -Torque: 600Nm -Operating pressure: 6.3bar -Impact mechanism: Twin Hammer -Metal housing -Weight 2.5Kg Shipping available for an extra charge. The pneumatic wrench is sold workshop-tested and immediately ready for use with a new UVV test. # Impact Wrench # Pneumatic Wrench # Pneumatic Impact Wrench # RAMI Yokota # Toku # MI17 # 1/2inch # 1/2"
Spare parts for Battenfeld injection moulding machines The parts are 100% original and functional, and above all, much cheaper than new parts • Control units •Screens • Pressure transducer • Smart cards •Modules •Power supplies •Switches •Keyboard • Temperature controllers • Amplifier Cards •Transducers • Pressure switches • Hydraulic motors • Hydraulic pumps •Manometers • Oil coolers • Proportional valves • Safety valves • Directional valves • Water faucets
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 27 mm -Dimensions: see photo technical drawing -Overall dimensions: 123/78/H67 mm -Total weight: 3.2 kg
Spare parts for Demag injection moulding machines The parts are 100% original and functional, and above all, much cheaper than new parts • Control units •Screens • Pressure transducer • Smart cards •Modules •Power supplies •Switches •Keyboard • Temperature controllers • Amplifier Cards •Transducers • Pressure switches • Hydraulic motors • Hydraulic pumps •Manometers • Oil coolers • Proportional valves • Safety valves • Directional valves • Water faucets
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 26 mm -Dimensions: see photo technical drawing -Overall dimensions: 123/78/H67 mm -Total weight: 3.2 kg
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 27 mm -Dimensions: see photo technical drawing -Overall dimensions: 95/80/H67 mm -Total weight: 2.5 kg
Spare parts for Ferromatik injection molding machines The parts are 100% original and functional, and above all, much cheaper than new parts • Control units •Screens • Pressure transducer • Smart cards •Modules •Power supplies •Switches •Keyboard • Temperature controllers • Amplifier Cards •Transducers • Pressure switches • Hydraulic motors • Hydraulic pumps •Manometers • Oil coolers • Proportional valves • Safety valves • Directional valves • Water faucets
I offer for sale an unused and completely original packaged industrial shelf SSI Schaefer LTR600. The shelf was originally ordered for a project, but never assembled. All components are in new condition and are completely present. Technical data • Model: SSI Schaefer LTR600, single-sided longitudinal vertical shelf • Overall length: 39.3 m • Height: 7.6–8.1 m • Depth: 800 mm • 14 fields, each with a clear field width of 2,700 mm • 7 levels per field • Per level: 4 depth pads type UN Scope of Delivery • Complete shelf line LTR600 • All stud frames (7.6–8.1 m, orig.) • All trusses (2.7 m) • All depth pads type UN • Small parts & fasteners • Original SSI Schaefer packaging Condition • New • Never set up • Original packaging • Complete Logistics / Pick-up • Location: Fellheim (Bavaria) • Longest components: 7.6 ...
Fermentation Delay Cabinet Blue Moon for 24 trays 600 x 800 mm at a distance of 63 mm fully assembled, Power unit standard, top mounted Temperature from -15° to + 40°C max. Humidity up to 90% for the best dough flow Computer control Interior and exterior walls made of PVC Connection 230V, 1.3 KW, ready to plug in DGUV V3 tested Dimensions: 760 x 1090 x 2325 mm, WxDxH NEW device 12 months warranty Optional: Interior and exterior walls made of stainless steel Aggregate external Maintenance contract Service Package More TOP proofers in stock!
REP Press Model V58Y10W Injection volume 1000ccm Platen size: 500 x 630 mm Year 2006 Power: 2550 kN Operating hours: 14570 Moveable traverse Fix traverse Sliding Table
Transport with incline conveyor straight line length 8100 mm with incline conveyor length 1900 mm Currently conveys to a height of 1050 mm, but can be adjusted in pitch. Conveyor belt width 520 mm Total width 900 mm
Used KRONES 32.000 bph one-way PET filling line Former products: Carbonised water, CSD, energy drinks Scope of machines: NEA high-pressure compressor (approx. 9,000 operating hours) NEA high-pressure compressor (approx. 18,000 operating hours) 2001 LOHENNER compressed air tank 5,000 Ltr. 2001 MTA RWD350C dry recooler (roof / outdoor installation) 2001/2002 MUCKI MD-3 preform feeder with tipper with 500 kg load capacity 2001/2001 TANNER SBT-2212 preform hopper with unscrambler 2001/2001 TANNER HFT-3510 preform vertical conveyor 2001/2001 TANNER preform sorter incl. ejection unit 2001/2001 TANNER AST-3006 preform slide incl. air rinser 2001/2001 TANNER VZT-2500 electrical cabinet 2001/2001 SIG COROPLAST BLOWMAX 12 stretch blow molding machine, max. 18,000 bph - (One blowing machine must be replaced!) 2001/2001 RIEDEL PC 630.01-NE preform cooler 20 ...
Key data: 80 liter
Qty 1 x Farrel Pomini model F80 banbury mixer, Serial number: 82/92, Original year 1981, but overhauled in 2011, Standard 2 wing rotors, FYH dust seals, Pneumatic hopper, Hydraulic drop door, Unidrive gearbox, 250HP fixed speed AC motor and starter, Rotor speed 35rpm, Upgraded operator controls (new in 2011). Complete with hydraulic unit and lubrication system. In good working condition.
Key data: 160 liter
Qty 1 x Carter MK6 banbury internal mixer, Original year of manufacture 1995, New body 2012, Mixing chamber volume: 160L, Batch size: approx 150kg, Pneumatic hopper, 2 wing tangential rotors, S.S.A type dust stops, Hydraulic drop door discharge with linear actuator and spade latch, Pneumatic hopper, David Brown Semi-unidrive gearbox (1300rpm input, 50.4rpm output). Gearbox ratio 25.8:1, Power Rating 600kW. Complete with hydraulic powerpack and lubrication unit. Only used for softer compounds and in good condition. Currently without motor or electrical controls (can be quoted if required).
9 Removable 21 Shelf Racks Auction-ID: A1-45803-5
ribloc (rinser-filler-capper), pressure filler, isobaric, with vacuum pump pre-evacuation, manufacturer: Cime Careddu Italy, type DPS 12-12-1, 12 rinser nozzles, 12 filling valves, 1 head crown cap, year of manufacture: 2007, with height adjustment, set up for current bottles 330 ml + 500 ml + 750 ml 0.33 + 0.50 + 0.75 Tribloc (Rinser-Filler-Crowner), counter pressure, isobaric, with vacuum pump, pre-evacuation, Made by: Cime Careddu Italy, Type: DPS 12-12-1, 12 head rinser nozzles , 12 filling valves, 1 head crown corker, Year: 2007, with hight adjustment, adjusted to bottle 330ml + 500ml + 750ml 0,33 0,50 0,75
intermediate table GUK ZT 520; cleaned and tested; Working width 520mm; height-adjustable; Speed adjustable; suitable for connection to GUK folding machines. Intermediate transport table GUK ZT 520; cleaned and checked; working width 520mm; adjustable in hight; adjustable in speed; used for GUK folding machines.
Injector Manufacturer: Gunther Model: PI 52 Number of needles: 52 Needle diameter: 4 mm Tact per minute: 15 to 55 tact/min. Product passage height: 220 mm
Robotic TIG Welding Cell Equipment: Rotatable Welding Table – with two interchangeable frames KUKA KR6 R1820 industrial robot arm Year of manufacture: 2018 Serial number: 425602 Weight: 168 kg Max. Load capacity: 6 kg Reach: 1820mm KUKA KR C4 smallsize-2 controller / controller Year of manufacture: 2018 Serial number: 380929 Weight: 123 kg TIG Dinse DIX TIG 350 AC/DC Welding Machine Serial number: 19840519 TEKA Caremaster BIA welding fume extraction equipment (2 pcs.) Capacity: 2200 m³/h Connection Parameters: 400V / 50Hz / 2.5A Power: 1.1KW Weight: 125kg/pc Year of manufacture: 2008 6-section steel cabinet Equipped with additional accessories
Model: KXS7522AVCLE For technical data, see photo. System has few operating hours as it is only used for comparison tests. Subject to prior sale - errors possible! Internal reference number: D-1192
Transnorm Rising falling Incline belt conveyor GF 7750-600-500 RA2054 Technical data: Conveyor length (NL): 7750 mm (4150 mm + 3600 mm) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor, R32DT71D4BMG Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1998 condition: good (used) Conveying length in mm: 7750 Nominal / outs ...
PLC control, digital output, digital input, digital input module -Manufacturer: B&R, Digital input module with bus module -Type: X20 DI 837 -Bus module: X20 BM 11 -Number: 2 modules available -Price: per piece -Dimensions: 100/20/H75 mm -Weight: 0.1 kg/pc.
FAG measuring instruments: PG-20/E-F, No. 15863 No.256 If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.
Key data: 22 kN
Awaiting refurbishment at our headquarters in Northamptonshire is this BOY 22M injection moulding machine. Any machines awaiting refurbishment with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing mac ...
GEA Intercooler 34/17/6+9/4+6-VSv-S79-16xxx Spare part from 2011, Manufacturer: GEA Model No.: 34/17/6+9/4+6-VSv-S79-16xxx Type: Intercooler Serial Number: 20012129/20 Ab. Overpressure [bar]: 2 / 2.4 Ab. Temperature 10-90 / 0-165 Year of Make: 2011
Key data: 750 kN, 40 mm
Engel - Injection Molding Machine e - Max - 310/75 ( No.:1 ) -Electric - Year of construction: 2009 - With special accessories: Crane: 1000 kg - Screw: 40 – diameter - Actual shot value: 40,069,660 pcs. - Operating hours: 105,347 h – In automatic: 63,211 h - Control: LC-200 - Screen: 15 – inches - Clamping force: 750 KN - Mold plate size: 560 mm x 600 mm - Weight: 4,400 kg - Sales from location: Germany
SKF TIH 070m/230V Induction Heater Auction-ID: A1-45977-289
Key data: 750 kN, 35 mm
Engel - Injection moulding machine e - Max - 310/75 ( No.:2 ) -Electric - Year of construction: 2009 - With special accessories: Crane: 1000 kg - Screw: 35 – diameter - Actual shot value: 34,527,644 pcs. - Operating hours: 98,349 h – In automatic: 54612 h - Control: LC-200 - Screen: 15 – inches - Clamping force: 750 KN - Mold plate size: 560 mm x 600 mm - Weight: 4,400 kg - Sales from location: Germany
Key data: 750 kN, 35 mm
Engel - Injection moulding machine e - Max - 310/75 ( No.:3 ) -Electric - Year of construction: 2009 - With special accessories: Crane: 1000 kg - Screw: 35 – diameter - Actual shot value: 41,658,321 pcs. - Operating hours: 103,302 h – In automatic: 65,611 h - Control: LC-200 - Screen: 15 – inches - Clamping force: 750 KN - Mold plate size: 560 mm x 600 mm - Weight: 4,400 kg - Sales from location: Germany
maximum number of results exceeded
please refine your search
50 € 
