drive in used for sale

Lot of 2 Heimatec precision driven/live tool holders, Made in Germany. Part Nos. 8.010.56.066 and 8.010.57.065. Serial Nos. 10010 / 11:07 and 11778 / 15:01. Both: ratio 1:1, max. speed 6,000 rpm, max. pressure 25 bar (EK+IK), max. torque 50 Nm. Supplied with storage boxes Auction-ID: A7-50717-239

Heimatec precision driven/live tool holder, Made in Germany. Part No. 8.010.56.066, Serial No. 4240 / 18:02. Ratio 1:1, max. speed 6,000 rpm, max. pressure 25 bar (EK+IK), max. torque 50 Nm. Includes storage box and mounting hardware Auction-ID: A7-50717-238

Lot of 2 machine-tool driven/spindle tool holders with storage boxes. Part No. 8 010 57 066, Serial No. 5617 / 11:02, ratio 1:1, max. 6,000 rpm, max. torque 25 Nm. Part No. 8 010 57 049, Serial No. 11329 / 08:01, ratio 1:1, max. 6,000 rpm, max. torque 50 Nm. Auction-ID: A7-50717-236

Lot of 2 Heimatec right-angle driven/live tool holders, Made in Germany. One identification plate clearly shows Part No. 8 030 56 075, Serial No. 4241/18:01, transmission ratio 1:1, maximum speed 6,000 rpm, maximum pressure 140 bar, maximum torque 50 Nm, and 65 mm center distance. Supplied with 2 boxes, adjustment/Allen keys and small accessory/fastener sets as pictured. Auction-ID: A7-50717-229

Parker 638B Servoregler industrial servo drives. Input max. 3×400 V, 50/60 Hz, 11.4 A; output max. 3×388 V, 0–600 Hz, 15 A; nominal DC bus 565 VDC; Imax 30 A; control voltage 24 VDC (+20%/−10%), 1.2 A; internal ballast resistor 30 W. Made in Germany. Auction-ID: A7-50717-486

Equipped with 4-cylinder diesel engine, air compressor, does not brake. Auction-ID: A1-50447-20

Equipped with 4-Cil. \"Deutz\" Diesel engine; turbo; 50 km/h; front axle sprung; air system; hydraulic brake valve; PTO shaft 540/750/1000 eco; load sensing. Adjustable catch mouth; fender control; Auction-ID: A1-47392-28

Lot of 2 Heimatec precision driven/live tool holders, Made in Germany. Part No. 8 010 57 066. Serial Nos. 5617 / 11:01 and 5116 / 11:02. Ratio 1:1, max. speed 6,000 rpm, max. torque 25 Nm. Includes 2 storage boxes. Auction-ID: A7-50717-237

Equipped with 4-Cil. \"Deutz\" diesel engine; turbo; 50 km/h; front axle sprung; PTO: 540/750/1000 ECO; front linkage with 1 double-acting hydraulic valve; 4 double-acting rear hydraulic valves; hydraulic brake valve; lower drawbar; adjustable catch mouth; fender control; Please note, this is a 411, stickers are from a 412 Auction-ID: A1-47392-29

ABB Motor 800kW, Auction-ID: A1-50608-170

ABB Motor 800 kW, Auction-ID: A1-50608-167

ABB Motor 800 kW, Auction-ID: A1-50608-168

Technical details Type: Automated storage and retrieval system (AS/RS) Configuration: - Multi-level steel storage rack - Chain-driven transfer shuttle - Vertical lift system - Electric geared drive motor - Guide rail system - Loading and unloading station - Push-button control station - Pallet/bin support rails Application: - Automated warehouse storage - Industrial pallet handling - Bin storage and retrieval - Production inventory management - Manufacturing logistics Construction: - Heavy-duty welded steel structure - Approx. 8–12 storage levels - Chain-driven transfer mechanism Dimensions: - Length: Approx. 20000 mm - Width: Approx. 6000 mm - Height: Approx. 12000 mm Weight: Approx. 15000 kg Condition: Used Observed condition: - Structure appears substantially complete - Chain drive and sprockets installed - Geared drive motor present - Lift frames app ...

1 pc. MT40ZD4-90, # 1179 2 pcs MT40W4-90, #9143, #9145

B-stock of various hydraulic components, Rexroth A4VG90, including cylinders, pistons, drive shafts, bearings, and other components. approx. gross 220 KG incl. pallet 120x80x54 forklift available, inspection desired Auction-ID: A1-50807-9

- 22 HP, - Diesel engine, 3-cylinder, liquid-cooled - Semi-automatic transmission with shuttle shift (forward/reverse) - 12 forward and 12 reverse speeds - 4x4 / 4WD drive - Differential lock - 3-speed PTO - 3-point hitch system Auction-ID: A1-50377-41

John Deere 6215R Recently replaced gearbox - invoice can be provided on request Auction-ID: A3-46134-19415

BMW X1 sDrive18d from 2018, versatile premium SUV equipped with a 2.0 diesel engine of 110 kW (150 hp) combined with an automatic gearbox. Presented in an elegant black colour with alloy wheels and neat exterior finishes. Comfortable interior with leather upholstery, multifunction steering wheel, dual-zone automatic climate control and BMW multimedia system with navigation. The vehicle also benefits from parking aids, LED headlights, roof bars and a towbar, offering a particularly practical configuration in everyday use. BMW electronic service history available, with several interventions recorded in the vehicle's system. Belgian vehicle with its registration documents. A stylish, comfortable and versatile BMW X1, suitable for both daily and long journeys. Auction-ID: A3-46098-39346

B-stock of various used hydraulic components, Rexroth A4VG125 and 71, including cylinders, pistons, drive shafts, bearings, and other components. approx. gross 330 KG incl. pallet 120x80x54 forklift available, inspection desired Auction-ID: A1-50807-26

- 30 HP, 3-cylinder, liquid-cooled diesel engine - 4x4 drive - Semi-automatic transmission with shuttle shift (forward/reverse) - 16 forward and 16 reverse speeds - Differential lock - Power steering - 3-point hitch system - 4 PTO speeds + 1 reverse speed Auction-ID: A1-50377-43

- 26 HP, 3-cylinder, liquid-cooled diesel engine - Displayed hours: 1,527 hours - Semi-automatic transmission with shuttle shift (reverser) - 16 forward and 16 reverse speeds - 4x4 drive - Power steering - Differential lock - 4 PTO speeds + 1 reverse PTO speed - 3-point hitch system Auction-ID: A1-50377-42

Equipped with 4-Cil. \"Sisu\" Diesel engine; 40 km/h; PTO: 540/750/1000 rpm; 2 double-acting hydraulic valves; hydraulic brake valve; depressurized return; Auction-ID: A1-47393-106

Auction-ID: A1-50750-428

Specifications: Brand: Fendt Model: Farmer 103S Version: Turbomatik Type: FW 138 S Year of construction: 1977 Vehicle type: agricultural tractor License Plate: TTD-08-V Fuel: diesel 3-cylinder diesel engine Two-wheel drive (2WD) Manual transmission Enclosed driver's cab Suspension driver's seat Analogue instrument cluster with operating hours counter Front weight Hydraulic rear linkage Three-point linkage with top link Rear PTO Rear hydraulic connection(s) Pull device with ball coupling Traffic and work lighting Rear fog window Auction-ID: A1-47393-120

Valve speed 1000/750/540, hydraulic brake valve, front linkage, rear linkage, PTO, lighting, work lights, opening windows, radio, air conditioning, rearview mirrors Auction-ID: A1-47393-123

Equipped with: front linkage, front pull pin, 1x double-acting hydraulic valve front, work lights, air suspension seat, air brake connection, fender control, piton fix towbar, 4x double-acting rear hydraulic valves Auction-ID: A1-47393-67

Equipped with 3x double-acting rear hydraulic valve (1x electronic and 2x mechanically operable PTO speed 540/540E/1000/1000E 4 cylinder diesel engine with 105HP Dealer maintained user manual present equipped with air conditioning electronic rear linkage Auction-ID: A1-47393-25

Specifications Jinma JM-354 Type: Compact Farm Tractor Brand: Jinma Model: JM-354 License Plate: TST-48-N Power: approx. 35 hp Fuel: diesel Technology and equipment All-wheel drive, switchable between 2WD and 4WD High and low range manual gearbox Rear PTO Hydraulic three-point linkage Four rear hydraulic quick couplings Externally operated hydraulic valve block with two levers Differential lock Hand and foot throttle Separate brake pedals Front weights Vertical exhaust with heat shield Air inlet with pre-filter Analog instruments Front and rear lighting Turn signals and alarm lights Beacon Warning triangle for slow traffic Collapsible safety bar/ROPS Open driver's seat Adjustable driver's seat Agricultural tyres on white steel rims State The tractor is visibly in used condition. There are normal signs of wear, local paint damage and some superficial rust. The seat has minor damage. The ...

Equipped with: working lights, cab, suspension seat, double PTO rear Auction-ID: A1-47393-234

Equipped with: 4x hydraulic double-acting valve rear, air system, air brake connection, pressureless return, hydraulic brake valve, Pitonfix drawbar, Auction-ID: A1-47393-88

540/1000 PTO speed, lighting, rear-view mirrors, 3-point rear linkage, pull pin, drive axle, 1 ignition key, was owned by the municipality of Apeldoorn. Auction-ID: A1-47393-122

Equipped with: Air brakes, PTO speed 540/750/1000/1400, connection for front loader incl 6 valves (without the front loader itself), 4 double valves rear, 7 poles, tow bar, ac, work led lighting. Auction-ID: A1-47393-38

Equipped with: 4x double-acting rear hydraulic valves, air brake connection, hydraulic brake connection, air suspension cab, fender control, work lights, beacon, front linkage, 1x double-acting hydraulic valve front Auction-ID: A1-47393-68

Equipped with: PTO speed 540/540e/1000, linkage front and rear, 1 double valve front + return, 4 double valves rear, adjustable top pull bar, Michelin tires all around, air suspension cab, isobus connection, power connection rear, air brake connection, hydraulic brake valve, load sensing, hydraulic suspended front axle, Auction-ID: A1-47393-58

Equipped with: Hour counter is not correct now at 33200 should be 3320! PTO speed 540/1000. Hydraulic suspension seat. 2 rear double valves, 7-pole tow bar, working lights, 3-cylinder water-cooled diesel engine, 18.4 kW/25 hp, 4WD, hydraulic power steering, manual transmission with high/low gearing, 3-point linkage category I. Auction-ID: A1-47393-189

Consisting of 1x length 800 mm, 1x length 1250 mm, 1x length 1450 mm, 1x length 1350 mm and 1x length 500 mm, flange diameter 12 mm each Auction-ID: A1-50849-276

• Lot of 6 variable frequency drives • It includes: • 3 x HITACHI L100-005 NFE drives • 2 x HITACHI L100-002 NFE drives • 1 x STÖBER FDS4024/B drive • Operating conditions of this machine: unchecked. • This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A7-50834-209

• Variable frequency drive • Voltage 400V • Power 22 KW • Operating conditions of this machine: unchecked. • This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A7-50834-202

- Includes: < br> - 1 x YASKAWA VS-606V7 speed drive: 3 phases, 400 V, power 5.50 KW. - 1 x YASKAWA VS-606V7 speed control: 3 phases, 400 V, power 7.50 KW. - 3 x YASKAWA VS-606V7 speed control: 3 phases, 400 V, power 4 KW. - 1 x YASKAWA VS mini J7 speed control: single-phase, 200 V, power 0.55 KW. - 1 x OMRON VS mini J7 speed drive: single-phase, 200 V, power 0.55 KW. - Operating conditions of these items: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-50834-67

• Variable frequency drive • Voltage 400V • Power 22 KW • Operating conditions of this machine: unchecked. • This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A7-50834-203

• Variable frequency drive • Voltage 400V • Power 22 KW • Operating conditions of this machine: unchecked. • This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A7-50834-196

CNC lathe with driven tools, year 2003, CNC 18i-TB. Used machine. More info & price on IndustrialBuyer.

1/2\" pneumatic impact wrench with socket kit. Ideal for tightening car wheel bolts, assembly work and repairs. Auction-ID: A7-50799-8

1/2\" pneumatic impact wrench with socket kit. Ideal for tightening car wheel bolts, assembly work and repairs. Auction-ID: A7-50799-208

1/2\" pneumatic impact wrench with socket kit. Ideal for tightening car wheel bolts, assembly work and repairs. Auction-ID: A7-50799-108

1/2\" pneumatic impact wrench with socket kit. Ideal for tightening car wheel bolts, assembly work and repairs. Auction-ID: A7-50796-108

- Date of first registration: 09/05/2016. - Chassis number: ZGEA02372. - Engine size: 6728cc. - Registration certificate: part 1 and part 2 available. - Certificate of conformity: present. - Fuel oil meter to check, first goes down and then returns to normal level. Auction-ID: A1-50023-1

1/2\" pneumatic impact wrench with socket kit. Ideal for tightening car wheel bolts, assembly work and repairs. Auction-ID: A7-50796-208

Först - TR6D42, Year 2022 - Internal No. 909893 Tracked chippers / wood chippers with chain drive Length (with hopper at the bottom): 3405 mm Height (with hopper at the top): 2627 mm Height (with ejector): 2295 mm Diesel engine: 42 hp Doosan D18 Tank capacity: 30 litres Feed roller opening: 150 x 200 mm FörstGrip feed roller system Flywheel open at the top (640 x 25 mm), two 8'' blades AutoIntelligence No-Stress System Water and vibration resistant touchpads Auction-ID: A1-50910-97

1/2\" pneumatic impact wrench with socket kit. Ideal for tightening car wheel bolts, assembly work and repairs. Auction-ID: A7-50796-8