drive in used for sale

3 roller conveyors, electrically driven, length approx. 3000 mm each Auction-ID: A1-46310-139

Internal number 2549 Auction-ID: A1-46329-22

Beer transport tank in a shipping container, with CIP spray head and manhole. Includes a metering system (max. flow rate: 120 l/min)., Additional title: Stainless steel pressure tank housed in a container, Capacity: 7200 l, Operating pressure: 2,5 bar, Operating temperature: 20 °C, Length: 7,25 m, Width: 2,4 m, Height: 2 m, Features: control, pump, hose reel, flow meter, cable drum, fittings, CIP spray head, manhole

ATTENTION! Vehicle is in Poland but can be brought to BE by seller for a fee! Auction-ID: A3-43524-13001

Incl. 1x 3000 mAh battery and 1x FEIN ALG80BC charging station Auction-ID: A1-46480-3050

-Front linkage -Front PTO -Top link in the front -Hydraulic top link at the rear -DW valve in front -4DW rear valves -Adjustable tow bar -Air brakes -Oil brakes -PTO 540/750/1000 -Reversing device -No documents Auction-ID: A3-43524-30087

-Deutz agrotron 90 -6890 hours -2 DW valves -heating needs to be checked Auction-ID: A3-43524-17249

Operating characteristics, o Feeding in closed pipe., o Outlet is guaranteed under pressure by 2 centripetal pumpsmade in AISI 304., o All material in contact with the product is made in stainless steel AISI 304 or higher., o The outflow system is completed with 2 pressure gauges in AISI 304 stainless steel and 2 micrometric valves to modulate the pressure of the lean and the concentration of the cream., o The sludge discharge is electronically controlled (through a hydrodynamic circuit) and takes place without interrupting the working process. The time interval between the single discharges can be programmed according to the characteristics of the product., o There is an automatic washing program at the end of the work in a closed cycle (CIP). Therefore, disassembly of the bowl is not required., Construction features and equipment, o Platform: fully made in stainless steel AISI 304 with ...

Operating characteristics, o Feeding in closed pipe., o Outlet is guaranteed under pressure by 2 centripetal pumpsmade in AISI 304., o All material in contact with the product is made in stainless steel AISI 304 or higher., o The outflow system is completed with 2 pressure gauges in AISI 304 stainless steel and 2 micrometric valves to modulate the pressure of the lean and the concentration of the cream., o The sludge discharge is electronically controlled (through a hydrodynamic circuit) and takes place without interrupting the working process. The time interval between the single discharges can be programmed according to the characteristics of the product., o There is an automatic washing program at the end of the work in a closed cycle (CIP). Therefore, disassembly of the bowl is not required., Construction features and equipment, o Platform: fully made in stainless steel AISI 304 with ...

Operating characteristics, o Feeding in closed pipe., o Outlet is guaranteed under pressure by 2 centripetal pumpsmade in AISI 304., o All material in contact with the product is made in stainless steel AISI 304 or higher., o The outflow system is completed with 2 pressure gauges in AISI 304 stainless steel and 2 micrometric valves to modulate the pressure of the lean and the concentration of the cream., o The sludge discharge is electronically controlled (through a hydrodynamic circuit) and takes place without interrupting the working process. The time interval between the single discharges can be programmed according to the characteristics of the product., o There is an automatic washing program at the end of the work in a closed cycle (CIP). Therefore, disassembly of the bowl is not required., Construction features and equipment, o Platform: fully made in stainless steel AISI 304 with ...

Operating characteristics, o Feeding in closed pipe., o Outlet is guaranteed under pressure by 2 centripetal pumpsmade in AISI 304., o All material in contact with the product is made in stainless steel AISI 304 or higher., o The outflow system is completed with 2 pressure gauges in AISI 304 stainless steel and 2 micrometric valves to modulate the pressure of the lean and the concentration of the cream., o The sludge discharge is electronically controlled (through a hydrodynamic circuit) and takes place without interrupting the working process. The time interval between the single discharges can be programmed according to the characteristics of the product., o There is an automatic washing program at the end of the work in a closed cycle (CIP). Therefore, disassembly of the bowl is not required., Construction features and equipment, o Platform: fully made in stainless steel AISI 304 with ...

mytron 160 K CO2 Double Incubator The CO2 Incubator 160 / 160K provides the "in vitro" growing cell and tissue cultures with environmental conditions that are very close to the physiological values of the organism. Interior volume: approx. 160 l Weight: 70 kg Recirculating air circulation: by fan Cooling: Cooling unit Temperature display: Setpoint and actual value display Temperature range: 5 °C above room temperature to 70 °C Temperature range (cooled): +15°C to 70°C at 23°C ambient Temperature constancy: +/- 0.2 K temporal Humidity display: setpoint and actual value display Humidity range: >/=95 % Moisture resistance: +/- 2.5 % CO2 display: setpoint and actual value display CO2 range: 0% to 20% CO2 CO2 constancy: +/- 0.2 % CO2 CO2 recovery time: 1% CO2/min Power supply: 230 V, 50 Hz, 2 x 8 AT WxHxD= 130x85x70 cm More items new and used - you can find them i ...

mytron 160 K CO2 Double Incubator The CO2 Incubator 160 / 160K provides the "in vitro" growing cell and tissue cultures with environmental conditions that are very close to the physiological values of the organism. Interior volume: approx. 160 l Weight: 70 kg Recirculating air circulation: by fan Cooling: Cooling unit Temperature display: Setpoint and actual value display Temperature range: 5 °C above room temperature to 70 °C Temperature range (cooled): +15°C to 70°C at 23°C ambient Temperature constancy: +/- 0.2 K temporal Humidity display: setpoint and actual value display Humidity range: >/=95 % Moisture resistance: +/- 2.5 % CO2 display: setpoint and actual value display CO2 range: 0% to 20% CO2 CO2 constancy: +/- 0.2 % CO2 CO2 recovery time: 1% CO2/min Power supply: 230 V, 50 Hz, 2 x 8 AT WxHxD= 130x85x70 cm Buy incubators and other products at low pric ...

Type: 6SE7031-3FG20-Z Description: SIMOVERT MASTERDRIVES SIMOVERT VC, CONVERTER CHASSIS UNIT, IP00 3 500-575V AC, 50/60HZ, 128A NOM. POWER RATING: 90 KW .

Lippert inclined diverter Inclined inlet saw feed 45° RA1821 Year of manufacture: 2012 Feed angle: 45° (gusset) Nominal/outer width (NB): 570 mm Usable width (NUB): 500 mm Conveyor speed: adjustable Roller diameter: 50 mm Interroll, hexagon incl. compression spring Drive: 1x Drivecontrol 20 with 24V Material: galvanised steel Centre distance: 75 mm Overall height: 130 mm Transport dimensions: L x W x H = 705 x 570 x 130 mm Features: condition: good (used) Construction year: 2012 angle: 45° nominal voltage: 24V Conveying length in mm: 705 Nominal / outside width in mm: 570 Roll width in mm: 50 Roll division in mm: 75 Driven: YES Engine type: Trommelmotor KW: - Ampere: - Conveyor speed m / s: freely adjustable scope of delivery: without supports and side guides For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you ...

Auction-ID: A1-45803-21

Technical description : - RAPID ACTION DOOR - Height = 2000mm - Width = 1800mm

Technical description : - RAPID ACTION DOOR - Height = 2000mm - Width = 2000mm

Controls:FANUC 30iA WORKING RANGE -ROBOT-:. - capacity:170 kg - Reach:1520 mm - Number of controlled axes:6 DIMENSIONS / WEIGHTS:. - total weight approx.:800 kg

Controls:FANUC 30iA WORKING RANGE -ROBOT-:. - capacity:170 kg - Reach:1520 mm - Number of controlled axes:6 DIMENSIONS / WEIGHTS:. - total weight approx.:800 kg

WORKING RANGE -ROBOT-:. - capacity:210 kg - Reach:2700 mm

Controls:KUKA KRC 2 WORKING RANGE -ROBOT-:. - capacity:150 kg - Number of controlled axes:6 DIMENSIONS / WEIGHTS:. - total weight approx.:1285 kg

Controls:KUKA KRC 4 WORKING RANGE -ROBOT-:. - capacity:90 kg - Reach:2696 mm - Number of controlled axes:6 ELECTRICAL SPECIFICATIONS:. - mains voltage:380 V - mains frequency:50 Hz DIMENSIONS / WEIGHTS:. - total weight approx.:1058 kg

Controls:KUKA KRC 4 WORKING RANGE -ROBOT-:. - capacity:90 kg - Reach:2696 mm - Number of controlled axes:6 ELECTRICAL SPECIFICATIONS:. - mains voltage:380 V - mains frequency:50 Hz DIMENSIONS / WEIGHTS:. - total weight approx.:1058 kg

Controls:KUKA KRC 4 WORKING RANGE -ROBOT-:. - capacity:120 kg - Reach:2896 mm - Number of controlled axes:6 ELECTRICAL SPECIFICATIONS:. - mains voltage:380 V - mains frequency:50 Hz DIMENSIONS / WEIGHTS:. - total weight approx.:1084 kg

Controls:KUKA KRC 4 WORKING RANGE -ROBOT-:. - capacity:120 kg - Reach:2896 mm - Number of controlled axes:6 ELECTRICAL SPECIFICATIONS:. - mains voltage:380 V - mains frequency:50 Hz DIMENSIONS / WEIGHTS:. - total weight approx.:1084 kg

Memmert B60 Incubator For sale is a used B60 incubator from the manufacturer Memmert. Technical details: Manufacturer: Memmert Model No.: B60 Design: Incubator / Incubator / Heating Oven Temperature range: approx. +10 °C above room temperature up to 70 °C Power: approx. 2000 W (220 V / 50-60 Hz) Application: Laboratory, Research, Industry, Medicine Condition: Used, functional Buy Memmert B60 incubators and other items at low prices – Here you can buy goods from professionals for professionals – In our SHOP you will find more attractive offers.

Inspection system for VW T6 B-pillar AP1 left and right as well as C-pillar, year 2016, SN SNP 15006, power 0.2 kW, compressed air max. 10 bar, control Siemens 1212C, dimensions approx. 1,600 x 800 x 2,000 mm, rollable, Inv.Nr. 100022

Auction-ID: A1-45889-2767

Hako Jonas 1200 D industrial ride-on sweeper, diesel version, suitable for warehouses, production areas, yards, parking lots and internal roads. Key data: • Model: Hako Jonas 1200 D • Year: 2011 • Power: 8.2 kW • Vehicle ID: 630020 1 0460 3 • Permissible gross weight: 1330 kg • Sweeping width: 80 cm / 115 cm with side broom • Hopper capacity: 130 L • Theoretical performance: up to 10,300 m²/h • Working speed: up to 9 km/h Features: • side broom • high dump hopper • working lights • warning beacon • seated operator position Auction-ID: A7-46285-14

Laboratory incubaor from the Spanish company JP Selecta Auction-ID: A7-46406-8

Controls:FANUC J3iC WORKING RANGE -ROBOT-:. - capacity:210 kg - Reach:2655 mm - Number of controlled axes:6 DIMENSIONS / WEIGHTS:. - total weight approx.:1240 kg Technical description : 6-axis industrial robot. Payload according to model. Including electrical cabinet operating panel and cable. More KUKA robots in quantities available i.e. # KUKA KR 150 # KUKA KR 210 # KUKA KR 240 # KUKA KR 360

Controls:FANUC J3iC WORKING RANGE -ROBOT-:. - capacity:210 kg - Reach:2655 mm - Number of controlled axes:6 DIMENSIONS / WEIGHTS:. - total weight approx.:1240 kg Technical description : 6-axis industrial robot. Payload according to model. Including electrical cabinet operating panel and cable. More KUKA robots in quantities available i.e. # KUKA KR 150 # KUKA KR 210 # KUKA KR 240 # KUKA KR 360

Main product investors Product accelerator Suction opening station 2 Product supplement investors End element with discharge Dashboard Band display 1 compressed air/vacuum pump Still in operation: No Available: immediately

Main product investors 12 Product supplement Investors Scan Still in operation: No Available: immediately

Farrel Pomini model F620 Banbury internal mixer, net mixing chamber volume: 710 litres Machine number 6515. Original year of manufacture: 1972, but body replaced 1998 approx batch weight at SG 1 - 533kg, 4 wing rotors, drilled sides, fully stellite welded chamber, rotors and floating weight, S.S.A. dust seals, hydraulic drop door with linear actuator, pneumatic hopper, unidrive gearbox with 2 x CEM 1475kW, 1550A, 1000V, 800/1000rpm DC variable speed motors, Drive controls included, but operator controls not available. In good condition (only used for tyre compound masterbatch). Spares available: Door top (new), hinge shaft (new), 2 x dust seals, hopper seals and bearing seals.

Main product investors Suction opening station 1 Tandem product insert stations 2 Product supplement investors 1 Tandem product insert stations Accessories: Still in operation: No Available: immediately

Cat. No. 11-3160 New Standard: Material V2A (AISI 304) Operating pressure max 0.49 bar Container completely stained, passivated and neutralized Heating jacket height 970 mm Insulation made of PU foam thickness = 80 mm Standard: Manhole top Ventilation valve made of PVC Manhole inside oval 440 x 350 and manhole outside rectangular for insulated container Test tap Stand display 24 mm Ladder bracket Residual drain with outlet pipe DN 50 Digital thermometers Clear drain DN 50 Transport eyelets Cat. No. Contents Diameter Height Cyl.Height Feet 11-3160-1 1200l 1350 mm 2070 mm 1000 mm 3 11-3160-2 2400l 1350 mm 3130 mm 2160 mm 3 Disc valve DN 50 Price on request For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 On request, we will be happy to send you our complete catalogue. All prices are ex works plus law VAT Interm ...

Gr. Pulling force 10 to, gr. Stroke 1000 mm , cutting speed 7.5 m/min, return speed: 24 m/min, weight: 6.2 to, built: 1987

max. tensile force: 20 to, max. stroke 1250 mm, max. cutting speed: 7m/min, maximum return speed: 25 m/min. max. workpiece 580 mm, max. tool 90 mm, clearing: 2 pieces, round-clock table, automatic workpiece feeder device, year 1960

1 x Farrel model F270 Banbury internal mixer, Machine number: 98M5023, Year 1999, 270 litre capacity, 2 wing rotor design, FYH type dust seals, Hydraulic drop door with linear actuator, Process oil system, Pneumatic hopper. with semi unidrive gearbox, AC variable speed motor, 550V (includes 11kv > 550v transformer). Alstom \Syncdrive\ AC variable speed drive controller, 1265 KVA, 550V, digital drive new in 2001. With Promtec Control system (complete but PLC missing). In feed conveyor and dust extraction system also available if required (at additional cost). Spare motor also available. Complete and in good condition (still installed at a factory in UK).

Incubator from Heraeus Type: B 5090 E Rated temperature: 70C 2-door glazed Dimensions: length x width x height: approx. 119 x 71 x 75 cm Weight: approx. 70 kg

Haffmans/Norit inline carbonator, fo inline adding CO2 to beverages. Only used for R&D activity's. CO2 flowmeter is missing, otherwise in good condition.

Haffmans/Norit karbonisierer, fuer inline karbonisierung von Getränken. Nur verwendet für Testzwecke. Durchflussmesser fehlt, weiter guten zustand.

WESTFALIA MZA 10 dynamischer Inlinemixer, Kapazität abhängig vom Produkt.

Farrel Pomini Model OOC Lab Banbury Internal Mixer machine number: 7511, Year: 1976 Net Volume: 4.24 Litres pneumatic hopper 30kW DC variable speed motor. Complete with control panel etc and in very good condition.

Cat. No. 11-3170 New without heating jacket - round standing on feet Medium-contact parts V4A (AISI 316) with electric screw-in heating 230/400 V, 7.5 kW Standard: Material: medium-contact parts V4A (AISI 316) - otherwise V2A (AISI 304) Operating pressure max 0.49 bar Container completely stained, passivated and neutralized Insulation made of mineral wool for hot water tanks thickness = 80 mm Standard: Manhole top DN 400 Ventilation and vent valve made of PVC Manhole inside oval 440 x 350 and manhole 500 x 430 outside rectangular for insulated container Test tap Stand display 24 mm Ladder bracket Residual drain with forward-drawn outlet pipe DN 50 with disc valve DN 50 with lid Digital thermometers Clear drain DN 50 with disc valve with lid Transport eyelets with electric screw-in heating, 230/400V, 7.5 kW Cat. No. Contents  ...

Thyssen Krupp model GK270NC Banbury type internal mixer, 4 wing tangential rotors, Year of manufacture: 2003 Latest Continental design chamber! Hydraulic hopper + power pack. Body and hopper only in good condition. Unidrive gearbox and motor can be quoted for if required (same centres as 11D or F270).

Gr. Pulling force: 16 to., gr. Stroke 1250 mm, Gr. Cutting speed: 5, 6 m/min Gr. Return speed: 30 m/min