drive in used for sale

Manual trolley, push trolley, crane trolley, trolley drive, crane drive, crane drive, trolley -Beam width: max. 230 mm -Payload: 3000 kg -Number: 4x drives available -Price: per piece -Dimensions: 390/250/H200 mm -Own weight: 38 kg

Linear drive, linear gear, lifting gear, spindle drive, electro-hydraulic actuator for valves, valve drive, actuator, servomotor, servo cylinder -Piston: Ø 32 mm -Stroke: 100 mm -Gliding guide -Stepper motor -Spindle pitch: 8 mm -Brake -Robotics cable -LECP6/LECA6, PNP, version with cutting data input -DIN- rail mounting -Dimensions: 630/320/H460 mm -Weight: 56 kg

Linear drive, linear gear, lifting gear, spindle drive -Type: linear module R036030000 -Type: Drive 1FK7022-5AK7Z -FV max .: 80 N -Linear guide ball screw -Travel: - mm -with: brake -Dimensions: 230/70/H450 mm -Weight: 5.44 kg

Manual trolley, push trolley, crane trolley, trolley drive, crane drive, crane drive, trolley -Reel for: crane chassis -Drawing with the photos -Chain length: 3600 mm -Number: 1x reel available -Price: per piece -Dimensions: 710/250/H220 mm -Own weight: 19 kg

Plastic shoes, chain drive protector, plastic protector, chain drive rubber, chain rubber, chain protector, rubber drive, rubber pads -Schoner: from working platforms from GSL (German Standard Lift) -universal: applicable -Quantity: 318x savers available -Minimum order: 4 pieces -Price: per piece -Dimensions: 315/59/H36 mm -Weight: 1.2 kg/piece

Swivel drive, pneumatic cylinder, rotary vane drive, swivel module -Manufacturer: Festo, freewheel for swivel drive -Type: FLSR-32-R -Part number: 15 637 -Freewheel direction: Right -Shaft: Ø 16 x 40 mm -Dimensions: 110/97/H93 mm -Weight: 1.1 kg

Properties: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packaged Roller conveyor with drive/conveyor conveyor Manufacturer: interroll Condition: Good (Used) Drive Type: Vertical Shaft approx. 42 linear metres available Plant consists of 14 segments -of which 6 are drive units (SEW motor (0.37 KW) Segment data Total width: approx. 535 mm Conveying width: approx. 455 mm Roll diameter: approx. 50 mm Wheelbase: approx. 75 mm Aluminum frame Frame height: approx. 120 mm Frame width: approx. 40 mm The conveyor system has run until it was dismantled. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, incl ...

Technical data shredder: Manufacturer Vecoplan AG Type VAZ 1300 M FF T Year of construction 2014 Operating hours 3,033 hours Drive type HiTorc drive Drive power 90 kW Speed variable, 0 up to 360 rpm Rotor length 1,295 mm Rotor diameter 370 mm 35 cutting crowns 40 x 40 mm Machine dimensions without hopper 3,170 x 2,365 x 1,500 mm (l x w x h) Weight 6.4 tonnes Application description of the manufacturer: The VAZ 1300 M FF Rotary Shredder with the SureCutTM Cutting System is designed specifically for single-stage reduction of plastic films and synthetic fibers being reclaimed for extrusion. The FF Series is built for high throughput, has built-in metering capabilities and thermal monitoring controls. Benefits of the SureCutTM Cutting System include precise cut lengths and high bulk densities. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are available. Inspec ...

Main spindle drive, 2AD160C-B35OB1-BS03-A2N1, R911243562, Rexroth, overhauled-mint condition Special price Used and overhauled! The part was purchased from a spare parts warehouse of a company. The main spindle was completely reconditioned by Bosch Rexroth and is therefore in a mint condition. - Asynchronous motor, main spindle drive - Power: 37,7 - 55,5 KW - 380V / 3 in. - 1500 - 6000 rpm - 240 Nm - 93,5 A - 280kg Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will refund the purchase price.

Main spindle drive, 2AD132D-B05OB2-AS03-B2N1, R911238179, Rexroth, refurbished-mint condition Special price Used and overhauled! The part was purchased from a spare parts warehouse of a company. The main spindle was completely reconditioned by Bosch Rexroth and is therefore in a mint condition. - Asynchronous motor, main spindle drive - Power: 22 - 33 KW - 380V / 3 pol. - 1500 - 7500 rpm - 140 Nm - 54 A - 162 kg Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will refund the purchase price.

Main spindle drive, 2AD101D-B05OB1-BD03-A2N1, R911250119, Rexroth, refurbished as new Special price Used and refurbished! The part was purchased from a spare parts warehouse of a company. The main spindle has been completely reprocessed by Bosch Rexroth and is therefore in mint condition. - Asynchronous motor, main spindle drive - Power: 9.5 - 14.25 KW - 380V / 3 pol. - 1500 - 9000 rpm - 60 Nm - 42 A - 71 kg Functional guarantee! For second-hand parts, we cannot provide a conventional guarantee and warranty. However, we give you a functional guarantee. If the device does not work during commissioning, you can return the goods and we will refund the purchase price.

Properties: Used roller conveyor Condition: good (used) Feet to order separately Condition: fully functional with traces of usage Ideal for fast material transport Professionally dismantled and packaged 24V technology Incl. sensors and light barriers (pre-assembled) Technical data: Dimensions of the roller conveyor Manufacturer: Interroll Type: Pressureless storage pressure Drive: 24V technology Total width approx.: 540mm Conveyor width: 455 mm Roll division: 75mm The system consists of 7 segments: 7x 1,650 with 2 drive rollers each information on the frame Height: 150mm Width: 40mm Max weight of the conveyed material 50Kg Roller railway The roller conveyor is ideal in the picking zone for interlocking machines or workstations and optimising the internal process. During transport, the roller conveyor can convey sensitive and dif ...

pneumatic rotary drive AMG SAD030 Up to a maximum of 10bar compressed air. At 6 bar 302 Nm. Drive 90° rotating, double-acting. Hpnrf22 Unused from remaining stock complete with 5/2 way solenoid valve from Norgreen 230 V 50/60 Hz, 5 VA, with adjustable throttle for setting time of 1- approx. 25 sec. Limit switch box set up with 2 mechanical switches for ON / CLOSE. See photos. Connection to valve F10, with vk 17 or 22.

Asynchronous motor, main spindle drive, 2AD100C-B05OB1-AS03-C2N1, R911246799, Rexroth, new Special price If you have a VAT number, we will be happy to issue you an invoice without VAT. As good as new in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is completely as new and in the original packaging. - Asynchronous motor, main spindle drive - Power: 12.6 - 18.9 KW - 380V / 3 pol. - 3000 - 9000 rpm - 40 Nm - 32 A - 58 kg Functional guarantee! For second-hand parts, we cannot provide a conventional guarantee and warranty. However, we give you a functional guarantee. If the device does not work during commissioning, you can return the goods and we will refund the purchase price.

Spindle drive, Simotics, 1PH8103-1MG02-0BG1-ZNO.YF, Siemens, refurbished-mint condition Special price Used and overhauled! The part was purchased from a spare parts warehouse of a company. The main spindle was completely reconditioned by Siemens and is therefore in a mint condition. - Asynchronous motor, spindle drive - Power: 7,5 KW - 380V / 3 pol. - max. 9000 rpm - max. 77 Nm - max. 42 A - 47 kg Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will refund the purchase price.

Asynchronous motor, main spindle drive, 2AD100C-B35OA1-AS03-A2N1, R911264223, Rexroth, used Top Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Used - top condition The part was bought from a spare parts warehouse and is in very good condition. - Asynchronous motor, main spindle drive - Power: 12,6 - 18,9 KW - 380V / 3 pol. - 3000 - 9000 rpm - 40 Nm - 32 A - 58 kg Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will refund the purchase price.

Cross table with stepper motor drive Precision positioning systems UHL Cross table UHL type KT5-NSOC Series No. 0008002 Table size: 145 x 145 mm Table opening: 75 x 75 mm Height: 51 mm Travel: 50 mm per axis Straightness / flatness: 5 ?m - Drive per axis via 2-phase hybrid stepper motor, type ZSS 33.200.1,2 - manual adjustment Dimensions (cross table) L x W x H: 265 x 220 x 51 mm Weight: 3.5 kg very good condition; used

6-axis AC servo drive, servo controller, servo inverter, servo amplifier, servo controller, frequency converter, drive controller for robots FANUC type A06B-6105-H0003 No. V07Z08282 Input voltage: 200 - 240 VAC Rated power: 1.5 kW Number of axle outputs: 6 Output current: 6 x 13 A Total output current: max. 78 A Manual No.: B-81465 Standard: EN50178 Built-in PCBs: A16B-2000-0063/07D A16B-3200-0440/05C - Plexiglas cover not included Dimensions W x H x D 70 x 170 x 380 mm Weight 16.5 kg As good as new / unused in the opened original carton from stock dissolution; used

Roller conveyor, roller conveyor, powered roller conveyor, roller conveyor -Execution: stable -Drive: electric -Drive motor: 0.37 kW 76 rpm -Roll width: 1450 mm -Conveying length: 2150 mm -Diameter roller: 105 mm -Rollers: rubberized -Diameter shaft: 25 mm -Delivery height: 950 mm adjustable -driven: via belt -Dimensions: 2150/1650/H960 mm -Weight: approx. 320 kg

Scrubbing machine, floor cleaning machine, mopping machine -Scrubbing machine with drive -Working width: 850 mm -Pract. Area performance: 2860 m2 / h -Charger -with drive -Special suction cup guarantees maximum suction power at low costs.

Rail guide table, linear unit with drive REXROTH THK LM GUIDE ACTUATOR KR stroke approx. 500 mm Table: 105 x 55 mm Table top: 90 x 80 x 35 mm Drive: REXROTH INDRAMAT MKD041B-144-KG0-KN New ! Dimensions: 1010 x 120 x 90 mm

Switch-disconnector, circuit breaker, 4 poles, with residual current release (RCU) and remote drive MOELLER NZM2-4 160 A 690 V Remote drive: NZM2-XR 380 - 440 V AC 0,35 kW Residual Current Release(RCU): NZM2-4-XFI30 30 mA used, tested ! Dimensions: 300 x 114 x 240 mm

Floppy Disk Drive, FLOPPY DISK DRIVE PANASONIC JU-257A606P 3.5 IRB6400-4220 with bracket used, tested ! Dimensions: 160 x 155 x 55 mm

Floppy disk drive, FLOPPY DISK DRIVE, with connection cable ABB, SONY MODEL MPF920 28436410 3.5 5 V DC 0.96 A connection cable: 3HAC6157-1 length approx. 0.3 m suitable industrial PC - see EL2909 ! used, checked ! Dimensions: 150 x 140 x 30 mm

Servo Drive, Servo Control, Servo Drive LINMOT E1130-DP Product no.: 0150-16687 2 Hardware: Version 1 Revision F Signal voltage: 24 V DC supply voltage: 30 - 85 V DC Output voltage: 30 - 85 V AC New ! Dimensions: 255 x 195 x 40 mm

Drum pump drive GRÜN FÖRDERTECHNIK ex300 Replacement drive for DL-Niro 420 W 220 V 20 m Kabel Ex protected ! Dimensions: 370 x 210 x 135 mm

Electric shaft drive, electric shaft winch, with limit switch ATB, DRIVE TECHNOLOGY G. BAUKNECHT 36W.09-E6 Speed: 9 rpm ( counted ) Shaft diameter: Ø 30 mm shaft length: 80 mm groove width: 8 mm Motor: RF0,37/2-7 1,0 kW 2800 rpm 220 / 380 V 3AC 50 Hz IP54 Gear base: 250 x 180 mm hole spacing (parallel to gear shaft): 155 mm hole spacing ( transverse to gear shaft ): 205 mm hole diameter: Ø 13 x 17 mm ( slotted hole ) New ! with documents ! Dimensions: 415 x 380 x 230 mm

Servo drive SEW R77DLR90L4BE5HR/IS/TF/AS7W 140 rpm 329 V IP54 shaft diameter: Ø 40 mm without servo drive ! New ! Dimensions: 770 x 300 x 270 mm

Milling head, with clamping drive and coupling device WMW, HECKERT FSS400 Tool holder: SK50 360 ° rotatable inner flange diameter: Ø 250 mm outer flange diameter ( inside / outside ): Ø 429 / 585 mm ring groove diameter ( inside / outside ): Ø 480 / 502 mm Groove width: 22 / 36 mm Hookers: 42 mm Clamping drive: ROTO RECORD EDU I80 HDR coupling: EK IH used, tested ! Dimensions: 1000 x 590 x 450 mm

Screw drive, drive unit ULRICH ANLAGEN- UND MASCHINENBAU GmbH UFS 90-68-6-12 Speed: 674 rpm Pipe inner diameter: 84 / 150 mm Gear motor: SEW R27F DRE100M2/TF/LN 2,2 kW 674 rpm 220 - 242 / 380 - 420 V 3AC 50 Hz IP54 New ! Dimensions: 1100 x 480 x 260 mm

Screw conveyor drive, drive unit ULRICH ANLAGEN- UND MASCHINENBAU GmbH UFS 90-68-6-12 Speed: 139 rpm Pipe inner diameter: 84 / 150 mm Gear motor: SEW R27F DRE90M4/TF 1,1,1 kW 140 rpm 220 - 242 / 380 - 420 V 3AC 50 Hz IP54 New ! Dimensions: 1050 x 480 x 260 mm

Drive unit DEMAG Roll diameter: Ø 140 mm Roll width: 65 mm Material: HydroPUR Drive flange diameter: Ø 42 / 75 mm bolt circle diameter: Ø 62,5 mm hole diameter: Ø 6.5 mm with double universal joint brush: 100 x 30 mm mounting surface: 205 x 85 mm hole spacing: 170 / 55 mm 4x threaded hole: M12 x 1.75, continuous used, tested ! Dimensions: 300 x 270 x 155 mm

mechanical tachometer, with hour display and drive shaft MERTIK Display: 0 - 2400 rpm K: 1.0 Operating hour display: four digits, one decimal place Front panel installation: Ø 80 mm Thread: M18 x 1.5 Drive shaft: length approx. 1.16 m New ! Dimensions ( without mounting bracket and shaft ): 105 x 85 x 85 mm Dimensions ( complete, without shaft ): 105 x 105 x 85 mm Dimensions ( packaging ): 105 x 105 x 85 mm

Rail guide table, linear unit with drive, limit switch and encoder STAR (REXROTH) 1460-305-00 stroke approx. 140 mm table: 220 x 220 mm drive: SIEMENS 1FT5046-1AF71-3EB0 345 V Base Plate & Table Stainless Steel ! used, checked ! Dimensions: 1020 x 320 x 90 mm

Crane bridge drive, bearing system drive. Sentence. 4 pcs. CIMCORP SLAVEMBR400TP 2 of which with antrib. SIEMENS / ALPHA 1FT6102-08AH71-4SH1 / TP 110X-MF2-25 -0k1-25 ( 1FT6102-08AH71-4SH1/TP110X-MF2-25-0k1 -25 ) all rollers with cleaning system CLEAN UNIT TSN-P041K Roll dimensions: Ø 350 mm x 110 mm Disc housing: 412251 used, tested ! Dimensions: 1200 x 800 x 500 mm

Motor drive, universal motor drive for cabin switchgear DRIESCHER UM 20 ( UM20 ) 77625500 77625600 220 V DC Holding torque: 25 Nm shaft diameter: Ø 30 mm Year of construction: 1995 New ! Dimensions: 560 x 320 x 210 mm

Properties: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packaged Roller Conveyor / Conveyor Conveyor / Rollers with Drive Year of construction: 2016 Manufacturer: AMI Fördertechnik Model/ Type: Flat Belt Condition: Used Total length: up to 300 meters Total width incl. motor: approx. 540 mm Conveyor width: approx. 450 mm Roll diameter: approx. 50 mm Roller spacing/ axle spacing: approx. 125 mm Frame height: approx. 120 mm Frame width: approx. 35 mm Colour: Light grey Drive Type: SEW Motor Flat Belt Stock: approx. 300 meters Price per meter The conveyor system has run until it was dismantled. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your c ...

Drive rolls, return rolls, conveyor belts, belt curves various dimensions RA2010 Various drive rollers and idlers for conveyor belts and belt curves in different lengths, angles and diameters Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Transnorm Roller Curve Conveyor 45° links 565-500 IR 750 RA1283 The Transnorm roller curve is from 2004 and in a good (used) condition. It has a sEW mid-engine with brake. Supports are included in the scope of delivery. Technical data: Manufacturer: Transnorm Type: TS 2712 Roller curve 45° left Built: 2004 Condition: good (used) Engine: fully functional Angle: 45° Inner radius (IR): 750 mm Nominal/outer width (NB):565 mm Belt width (GB): 500 mm Engine Type: SEW Gear motor with brake Engine Power: kW 0.37/0.37/S1 Hz 50 A 2.15/1.24 Drive: Center drive Funding speed: 30 m/min Weight: 84 kg Scope of delivery: incl. 2 supports (height adjustable) Price: plus VAT from central warehouse Dr. Sonntag KG 97076 Würzburg Payment: after invoicing with advance payment Delivery time: approx. 3 - 5 working days after receipt of payment Features: Für eine individuelle, fachmännische Be ...

Gebhardt roller curve conveyor 90° right 610-550 with 2x straight piece RA1282 The Gebhardt roller curve is from 2007 and in a very good (used) condition. It has an engine of the brand SEW. Supports are included in the scope of delivery. Technical data: Manufacturer: Gebhardt Type: 314.01 Position: 014.15 Built: 2007 Condition: very good (used) Engine: fully functional Angle: 90° Inner radius (IR): 850 mm Nominal/outer width (NB):610mm Usable width (NUB): 550 mm Length straight frame: 1 x 300 mm + 1 x 150 mm Engine Type: SEW Gear Motor Engine Power: kW 0.37/S1 Hz 50 A 2.00/1.15 Funding speed: 0.37 m/sec Drive: Head drive Rolls: Type: G6/50 sliding bearing with conical plastic molded part Weight: 110kg Scope of delivery: with supports 670 mm total high Price plus VAT from central warehouse Dr. Sonntag KG 97076 Würzburg Payment: after invoicing with advance payment Deliver ...

Datasheet Transnorm Roller Curve Conveyor 180° RIGHT 770-700 IR 800 RA1253 The Transnorm roller curve with side guides is from 1994 and in a good (used) condition. It has a mid-engine of the brand SEW with MOVIMOT inverter. Columns are not included in the scope of delivery. These are optionally available on request. Technical data: Manufacturer: Transnorm Type: TS 2712 curved belt 180° RIGHT Built: 1994 Condition: good (used) Engine: fully functional Angle: 180° Inner radius RN: 800 mm (nominal radius) Outer width: 770 mm Clamping length: 700 mm Side guide: inside and outside Engine Type: SEW Gear Motor + MOVIMOT Inverter Engine Power: kW 0.37/0.075 S1 Hz 50 A 1.30 Drive: Center drive Conveyor speed: adjustable from 2 to 90 m/min Weight: 210 kg Scope of delivery: without supports (if necessary please enquiries)? Payment: after invoicing with advance payment Delivery time: a ...

Transnorm roller curve 2 x 90Â ° 670-600 IR816 + straight unit 900-670-600 RA1219 The Transnorm wheel curves with straight gear are from 2006 and in a good (used) condition. It has a central engine of the SEW brand. Supports and side guides are not included in the scope of delivery. These are optionally available. Technical data: Manufacturer: Transnorm Type: TS 2712 Roller curve 2x90Â ° + straight frame Built: 2006 Condition: good (used) Engine: fully functional Angle: 90Â ° Inner radius (IR): 816 mm Nominal/outer width (NB): 670 mm Usable width (NUB): 600 mm Conveyor length straight section: 900 mm Motor Type: SEW three-phase motor Engine power: kW 0.55 S1 Hz 50 A 3.05 / 1.75 Funding speed: 0.7 m/sec Drive: Center drive Weight: 360 kg Scope of delivery: without supports (if necessary please enquiries) Optional: supports 70,00â ?¬ per piece Price: â ?¬ 3240,00 plus  ...

Key data: 35 KW, 1500 1/min

Main spindle drive, 2AD160C-B35OB1-BS03-C2N1, R911264677, Rexroth, overhauled-mint condition Special price Used and overhauled! The part was purchased from a spare parts warehouse of a company. The main spindle was completely reconditioned by Bosch Rexroth and is therefore in a mint condition. - Asynchronous motor, main spindle drive - Power: 37,7 - 55,5 KW - 380V / 3 in. - 1500 - 6000 rpm - 240 Nm - 93,5 A - 280kg Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will refund the purchase price.

Rotary drive for air flaps, rotary air flap drive -Holder hollow shaft: approx. Ø 32 mm -24 VAC -Protection class: IP 54 -20 Nm 90° -Price: per piece -Number: 1x available -Weight: 1.8 kg

Rotary drive for air flaps, rotary air flap drive -Holder hollow shaft: Ø 32 mm -230 VAC -Protection class: IP 54 -20 Nm 90° -Weight: 1.7 kg

Drive axle, AT unit, hydraulic motor -Manufacturer: Linde, drive axle LR for forklift H60D -Hydraulic unit: Linde MV75 -Axis: bolt circle Ø 225 mm -Individual components: see photos -Price/tax: complete -Dimensions: 850/860/H400 mm each -Weight: 290 kg/pc.

Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, controller, converter, controller -Manufacturer: Control Techniques, Brushless AC Servo Drive -Type: MAXAX 100/6000 -Input: 1.5kVA -Output: 1KW -Dimension: 315/230/H60 mm -Weight: 2.9 kg

Roller conveyor, conveyor track, roller conveyor belt, roller conveyor -Handover: in current condition as seen -Conveyor rollers: 6 pieces are missing, see photos -Roller conveyor: with electric drive -Roll width: 800 mm -Diameter roll: 110 mm -Axle distance: 200 mm -Drive: SEW-Eurodrive 0.37 kW 1415/64 rpm -Speed: 24 m/min -Total dimensions: 7370/1300/H1080 mm -Weight: 730 kg

Tiller head, pedestrian stacker, pedestrian pallet truck, tiller, steering, electric hand pallet truck -Manufacturer: Kaiser Kraft, drawbar complete with drive from pedestrian stacker UNI-GV 10/25 UNI 10/25 -Drive motor: 12V 0.3KW -Individual components: see photos -Number: 1x drawbar available -Delivery/Price: per piece -Dimensions: 1240/340/H270 mm -Weight: 43 kg/pc.

Tiller head, pedestrian stacker, pedestrian pallet truck, tiller, steering, electric hand pallet truck -Manufacturer: Jungheinrich, drawbar complete with drive from pedestrian stacker type EJE-KmS 16G-24-140-56 -Drive motor: 24 VDC / 1.5 kW -Individual components: see photos -Number: 1x drawbar available -Delivery/Price: per piece -Dimensions: 1585/510/H265 mm -Weight: 82 kg/pc.