130,805 used machines on RESALE, but how to find them? Machine Search
Year: 2021 Working hours : 250h Reference DE478-E2300C Screw diameter: 70 mm L/D ratio: 20 Injectable volume: 1251 cm3 Injectable weight in PS: 1138 g Injection pressure: 1890 bar Screw rotation speed: 220 rpm Injection speed: 160 mm/s Heating power: 33 kW Distance between tie bar: 850 x 800 mm Mold thickness: 320-800 mm Closing stroke: 710 mm Platen dimensions: 1270 x 1220 mm 4 hydraulic cores 3 blow guns EUROMAP 67
PROCREA INJECTION-BLOW MOLDING MACHINE TYPE : Rev 300 This PROCREA REV 300 injection-blow molding machine can produce completely finished, waste-free hollow-body containers, just like injection molded containers, using various plastic materials. Its fully automatic cycles allow for capacities from 50 cc to 15 liters and weights from 20 g to 700 g. This machine is designed to work with molds with 1 to 8 cavities, and production is very high thanks to the revolver system, which performs all injection, blowing, and ejection operations of the finished part in a single step. Mold construction for the Rev 300 is very simple thanks to the automatic extraction system applied to the revolver.
Mosca accumulation conveyor STF (timed belt conveyor) Condition: overhauled, serviced, fully functional, ready for use (stock new, 4 x transport belts/belts new). Total length 1 meter (2 x 500 mm) Equipped with 2 waiting positions Drive-on on 4 x transport rollers with locking levers Detection of products by means of 2 integrated photocells Equipped with 2 drives Speed infinitely adjustable by means of frequency converter in the electrical cabinet Equipped with contact plug for pre- and redesigned machine (potential-free, 24V) If the following machine is not ready, the products are stopped one after the other at the two respective waiting positions. As soon as the release signal from the downstream machine is available, the products are transported on again.
Indoor/outdoor installation Power 35 kW Rated power at full load at 80/60 °C - 31.1/34.0 kW Rated power at full load at 50/30 °C - 34.9 kW Auction-ID: A7-46479-58
Lot consisting of 3 industrial PVC high-speed doors 2x size 4700x5100 mm 1x size 4700x4500 mm DISMANTLING AND LOADING COST: EURO XXXXXXXXXX Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-45789-32
Indoor/outdoor installation Power 35 kW Rated power at full load at 80/60 °C - 31.1/34.0 kW Rated power at full load at 50/30 °C - 34.9 kW Auction-ID: A7-46479-59
Nominal heat output 80-60° C - 19.7 kW Nominal thermal power 50-30°C - 21.4 kW (boiler) + 4 kW (PdC) = 25.4 kW Auction-ID: A7-46479-71
Indoor/outdoor installation Power 35 kW Rated power at full load at 80/60 °C - 31.1/34.0 kW Rated power at full load at 50/30 °C - 34.9 kW Auction-ID: A7-46479-56
Indoor/outdoor installation Power 35 kW Rated power at full load at 80/60 °C - 31.1/34.0 kW Rated power at full load at 50/30 °C - 34.9 kW Auction-ID: A7-46479-57
Nominal heat output 80-60° C - 19.7 kW Nominal thermal power 50-30°C - 21.4 kW (boiler) + 4 kW (PdC) = 25.4 kW Auction-ID: A7-46479-72
Nominal heat output 80-60° C - 19.7 kW Nominal thermal power 50-30°C - 21.4 kW (boiler) + 4 kW (PdC) = 25.4 kW Auction-ID: A7-46479-73
Inverter: GoodWe 5048 hybrid inverter, incl. measuring coils and meter. Battery: 4x Dyness DL5.0C LV 5.0kWh Lithium battery (total 20 kWh) Including cable set Condition: new Key features: 5.12kWh storage capacity (51.2V, 100Ah) Safe and stable LiFePO4 technology 6000 long life cycles Smart BMS with comprehensive protections Scalable up to 50 units (256kWh) Compatible with many hybrid inverters CAN & RS485 communication Compact and easy to install The Dyness DL5.0C is a solid choice for those looking for a reliable, scalable, and affordable home battery without unnecessary complexity. Auction-ID: A1-46359-7
500 Junction boxes Length 100 cm 1000 V Junction box solar modules ip67 Auction-ID: A7-46479-75
15 Coils 350 m each Operating temperature 70° Diameter 7 mm Thickness 0.6 mm Auction-ID: A7-46479-36
– Specially designed to work with power optimizers – Record-breaking efficiency Quick and easy commissioning directly from a smartphone using the SolarEdge Setapp – Record-breaking returns – Extremely small, light and easy to install – High reliability For module-level monitoring – For indoor and outdoor mounting – Fixed working voltage for longer strings – Advanced safety features – Integrated arc flash protection Auction-ID: A1-46359-2002
Indoor/outdoor installation Power 35 kW Rated power at full load at 80/60 °C - 31.1/34.0 kW Rated power at full load at 50/30 °C - 34.9 kW Auction-ID: A7-46479-60
23 Coils 400 m each Operating temperature 105° Diameter 6 mm Thickness 0.6 mm Auction-ID: A7-46479-37
Hydraulic injection moulding machine manufactured in 2018. This Arburg ALLROUNDER 270 S 400-100 features a maximum clamping force of 400 kN and offers screw diameter options of 15 mm, 20 mm, or 30 mm. It has a maximum injection pressure of 2,500 bar for the smaller screws and a maximum shot weight of 79 g for the largest. If you are looking to get high-quality injection moulding capabilities, consider the Arburg ALLROUNDER 270 S 400-100 machine we have for sale. Contact us for further details.
Hydraulic injection moulding machine manufactured in 2021. This Arburg ALLROUNDER 570 S 1600 - 290 features a maximum clamping force of 1600 kN and a screw diameter of 30 mm. It has a calculated stroke volume of 106 cm³ and a shot capacity of 97 g/PS. If you are looking to get high-quality injection moulding capabilities, consider the Arburg ALLROUNDER 570 S 1600 - 290 machine we have for sale. Contact us for further details.
Transnorm Rising falling Incline belt conveyor with leading belt GF 800+1275+1005-700-600 RA2499 Technical data: Conveyor length (NL): 2980 mm ( 830 +150 mm arch + 1200 mm riser segment + 800 mm leading ) frame width (NB): 700 mm, 900 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 2980 ( 800 + 1275 + 1005 ) Nominal / outside ...
2 x Injection Molding Machines for Sale: - KraussMaffei KM 280-1000 CC BJ 2000 - JBOY 12M 1998
Injection moulding machine Arburg 270C 400-70 BJ 2015
Manufacturer: Eurotherm Year of Manufacture: 2019 Type of Machine : Manual Wash Booth with Automatic Spray Ring Condition: Good, regularly maintained (once per year) Cabin Dimensions - Internal Width: 4,000 mm - Internal Length: 7,000 mm - Internal Height: 3,500 mm - External Width: 4,100 mm - External Depth: 7,100 mm - External Height: 4,100 mm (double base tray) Construction - Cabin Type: Closed - Exhaust Air: Extraction at end of cabin - Panel Thickness: 50 mm with polyurethane insulation - Inner Walls: Stainless steel AISI 304 (V2A) - Outer Walls: Galvanized sheet metal, painted - Steel Profiles: Blue RAL 5002 - Access Door: 1 door, manual 4-leaf type, 4,000 x 3,500 mm, Blue RAL 5002 Exhaust and Ventilation - Air Flow Rate: 10,000 m3/h - Fan Motor Output: 1.5 kW - Droplet Separator: Yes - Chimney: Included, height 6.5 m - Lighting: 8 LED fixtures Automatic Spray Ring - Max ...
GoodWe GW80K-MT | with ARC detection Condition: unused Auction-ID: A1-46359-27
– Specially designed to work with power optimizers – Record-breaking efficiency Quick and easy commissioning directly from a smartphone using the SolarEdge Setapp – Record-breaking returns – Extremely small, light and easy to install – High reliability For module-level monitoring – For indoor and outdoor mounting – Fixed working voltage for longer strings – Advanced safety features – Integrated arc flash protection Auction-ID: A1-46359-1992
Technical details Type: Industrial locker cabinets (changing room lockers) Configuration: Single-door vertical compartments Material: Painted steel Quantity: Approx. 10–12 locker units (green) + 1 small compartment locker (blue) Design features: - Full-height lockers with hinged doors - Ventilation slots - Internal compartments (shelf/rod in some units) Locking system: Mechanical locks (partially missing or unclear) Application: Storage of personal belongings in industrial/workshop environments Condition: Used, with wear, rust spots, and surface damage Dimensions and weight (approx.) Length: 3000 mm (row total) Width: 500 mm Height: 1800 mm Weight: 150 kg (total) Auction-ID: A7-46498-188
Technical details Type: Mobile workbench / tool trolley (custom-built) Configuration: Steel frame with solid worktop and integrated storage Material: Painted steel with thick steel top plate Mobility: 4 swivel caster wheels with push handle Storage: - Open lower shelf - Enclosed side compartment Load capacity: High (industrial-grade construction) Application: Workshop use, metalworking, tool handling, and assembly tasks Condition: Used, with heavy wear, rust, scratches, and oil residue Dimensions and weight (approx.) Length: 1200 mm Width: 700 mm Height: 900 mm Weight: 120 kg Auction-ID: A7-46498-203
Viewing by appointment Working condition Auction-ID: A1-40377-36
Manufacturer: Schäffer • Type / Model: 2630 • Year of construction: 2022 • Operating hours: approx. 1054 h (read) • Type of application: Farm loader / wheel loader Technical data: • Engine power: 18.4 kW • Engine: Diesel engine, 3-cylinder • Drive: hydrostatic • Operating weight: approx. 2,025 kg • Permissible Total weight: 2,400 kg • Axle load front/rear: 2,000 kg each Equipment: • Front loader arm with quick-change system • Front hydraulic connections • Working hydraulics functional • Open cab with roll bar (ROPS) • Lighting available • Tyres in good condition Condition: • Used, very good general condition • Low operating hours • Functional, ready for use • Usual signs of wear present Auction-ID: A7-46606-1507
– Specially designed to work with power optimizers – Record-breaking efficiency Quick and easy commissioning directly from a smartphone using the SolarEdge Setapp – Record-breaking returns – Extremely small, light and easy to install – High reliability For module-level monitoring – For indoor and outdoor mounting – Fixed working voltage for longer strings – Advanced safety features – Integrated arc flash protection Auction-ID: A1-46359-2027
GoodWe GW80K-MT | with ARC detection Condition: unused Auction-ID: A1-46359-39
Technical details Type: Tilting drum mixer / rotary tumbler Configuration: Cylindrical drum mounted on pivoting frame Drive: Electric motor with gearbox and ring gear transmission Power: Estimated 3–7.5 kW Tilt mechanism: Gear-driven tilting system for discharge Control: External control panel (start/stop, direction, tilt) Electrical system: Separate cabinet with fuse-based distribution Capacity: Estimated 100–300 L Application: Mixing of powders, granulates, abrasives, metal parts, and industrial bulk materials Dimensions and weight (approx.) Length: 1800 mm Width: 1200 mm Height: 2000 mm Weight: 800 kg Auction-ID: A7-46498-124
– Specially designed to work with power optimizers – Record-breaking efficiency Quick and easy commissioning directly from a smartphone using the SolarEdge Setapp – Record-breaking returns – Extremely small, light and easy to install – High reliability For module-level monitoring – For indoor and outdoor mounting – Fixed working voltage for longer strings – Advanced safety features – Integrated arc flash protection Auction-ID: A1-46359-2018
– Specially designed to work with power optimizers – Record-breaking efficiency Quick and easy commissioning directly from a smartphone using the SolarEdge Setapp – Record-breaking returns – Extremely small, light and easy to install – High reliability For module-level monitoring – For indoor and outdoor mounting – Fixed working voltage for longer strings – Advanced safety features – Integrated arc flash protection Auction-ID: A1-46359-2003
Technical details Manufacturer: Thermocast Model: ROBAMAT Type: Industrial temperature control unit (thermoregulator) Configuration: Oil/water temperature control system Control: ROBAMAT control panel with temperature dial and indicator lights Operation: Analog/digital hybrid control (1980s–1990s design) System components: - Heating tank - Circulation pump - Heat exchanger - Fluid piping and connections Monitoring: Analog pressure gauge (front) Electrical: Main isolator switch and control panel Mobility: Mounted on casters Application: Injection molding, tool heating/cooling, industrial process temperature control Condition: Used, with wear, dirt, and corrosion; functionality untested Dimensions and weight (approx.) Length: 1200 mm Width: 600 mm Height: 1100 mm Weight: 350 kg Auction-ID: A7-46498-167
– Specially designed to work with power optimizers – Record-breaking efficiency Quick and easy commissioning directly from a smartphone using the SolarEdge Setapp – Record-breaking returns – Extremely small, light and easy to install – High reliability For module-level monitoring – For indoor and outdoor mounting – Fixed working voltage for longer strings – Advanced safety features – Integrated arc flash protection Auction-ID: A1-46359-2023
trolley dimension (LxWxH) 620x1900x1850 mm, equipped with WANZL Li-iom 25.2V/20.5 battery pack, drive wheel under trolley, 4x swivel wheel, 2x, battery charger, digital counter Auction-ID: A1-45845-130
Equipped with 2 x HBM PW12CC3MR load cells with a capacity of 75kg each, control cabinet with HMI display, sensors and cabling, adjustable legs and conveyor belt Auction-ID: A1-45845-34
Technical details Type: Granite surface plate (inspection table) Configuration: Granite slab mounted on welded steel stand Surface material: Precision ground granite Surface finish: Polished Thickness: Approx. 100–120 mm Support: Steel frame (welded construction) Height (with stand): Approx. 850–900 mm Accessories: - Removable heavy cover plate (steel or granite) - Basic measuring tools (non-core) Application: Precision measurement, flatness inspection, toolroom and QA use Condition: Used, with surface wear; structurally intact Dimensions and weight (approx.) Length: 1000–1200 mm Width: 600–800 mm Height: 900 mm Weight: 150–250 kg Auction-ID: A7-46498-180
Hydraulic Spare Parts – Assorted Lot General data: Equipment type: Hydraulic components and spare parts Condition: Used / partly new (mixed lot) Included items: Hydraulic directional and pressure control valves Solenoid valves (electro-hydraulic) with coil housings and manual overrides Manifold-mounted valve blocks Electrical coil connectors Brands: Likely Bosch Rexroth and other European OEM manufacturers Highlighted component: New spare valve (boxed) Label: Dr. Begr. Ventil ECG-06-F10-TG-GF/60” Type: NG6 / CETOP 3 hydraulic valve Additional equipment: Hydraulic pump / motor unit (blue housing, likely Rexroth) Description: Assorted lot of hydraulic spare parts including control valves, solenoid valves, manifold blocks, and pump units. Suitable for maintenance, repair, and industrial applications. Includes both used and new components, ideal for worksho ...
Technical details Type: Industrial vacuum and fluid handling system Configuration: Mobile unit with integrated vacuum tank and control manifold Vacuum system: OPTIVAC (Hedler / Optivac) Pump: Busch rotary vane vacuum pump Tank: Vertical steel vacuum vessel (buffer tank) Control manifold: - Vacuum regulators - Pressure/vacuum gauges - Valve block (Vacuum / Stop / Vent) Connections: Hoses, fittings, and fluid/vacuum lines Control: Basic electrical control box Frame: Mobile steel structure with caster wheels Application: Vacuum-assisted processes, degassing, mould evacuation, and industrial fluid handling Condition: Used, with wear and dust; functionality untested Dimensions and weight (approx.) Length: 1000 mm Width: 700 mm Height: 1600 mm Weight: 180 kg Auction-ID: A7-46498-173
Technical details Type: Mixed industrial tooling lot Category: Machining tools, metrology items, and workshop accessories Contents include: - Reamers (hand and machine) - Taps (metric threading tools) - Boring bars and small toolholders - Limited quantity of end mills / cutters - Gauge pins and plug-type measuring tools - Precision components stored in tubes - Spanners, screwdrivers, and general hand tools - Adapters, fixtures, and small pneumatic/fluid components Quantity: Several hundred individual pieces (mixed organized and loose) Equipment - Wooden compartment organizer - Plastic storage bins - Mixed industrial tooling and accessories Dimensions and weight (approx.) Length: 800 mm Width: 600 mm Height: 600 mm Weight: 120 kg Auction-ID: A7-46498-55
Inverter: GoodWe 5048 hybrid inverter, incl. measuring coils and meter. Battery: 1x Dyness DL5.0C LV 5.0kWh Lithium battery, including cable set Condition: new Key features: 5.12kWh storage capacity (51.2V, 100Ah) Safe and stable LiFePO4 technology 6000 long life cycles Smart BMS with comprehensive protections Scalable up to 50 units (256kWh) Compatible with many hybrid inverters CAN & RS485 communication Compact and easy to install The Dyness DL5.0C is a solid choice for those looking for a reliable, scalable, and affordable home battery without unnecessary complexity. Auction-ID: A1-46359-4
maximum number of results exceeded
please refine your search
1 € 
