We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,441 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Vertical drilling machine make ALZMETALL type Abomat 40Fabr. -No: 147 A built in 1968Drilling capacity in St / GG: 45/60 mmSpindle mount: MK 5Table size: 500 x 500 mm12 spindle speeds: 35 - 1400 rpm.7 automatic feeds: 0.04 - 0.3 mm / revSpindle head diameter: 62 mmDrilling carriage stroke: 400 mmDischarge: 330 mmMax. Distance table to spindle: 1165 mmMax. Distance base plate to spindle: 1550 mmDrive power: 4 hpDimensions L x W x H: 1350 x 600 x 2250 mmWeight approx. 1200 kgWith- semi-automatic workflow- electr. controlled jump feed- Two-hand releaseused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Pillar Drilling Machine make IXION type BS 50Mash. -No: 141395Drilling capacity: 50 mmSpindle mount: MK 5Drilling depth: 200 mmProjection: 325 mmTable surface: 650 x 500 mmColumn diameter: 160 mm4 automatic feeds: 0.08 / 0.12 / 0.2 / 0.32Spindle speeds stepless: 66 - 2000 rpm.Engine power: 2.0 / 3.8 kWWeight approx: 670 kgExternal dimensions: 700 x 1000 x 2070 mmWith- infinitely variable spindle speeds- electromagnetic feed circuit- Table adjustment from the frontused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Drilling capacity in steel (diameter): 80 mm Thread cutting in steel: M 80 x 4 mm Projection: approx. 500/2500 mm kl./gr. Distance between contact surface and drill pinole: 650/2300 mm Pinole stroke: 500 mm Table clamping surface: 1250 x 2800 mm Speeds: 9 - 1800 rpm Feeds: approx. 2 - 1250 mm Spindle drive: 7.5 kW Weight: 12000 kg Space requirement: 4000 x 1280 x 4100 mm
used
Code 71095 Description Pillar drill Make WEBO Modell Gradua 50 Serial No. 053 12 5 Year Table ( turnable ) 620 x 600 mm Base 620 x 600 mm Drilling capacity ( Steel 60 ) 60 mm Spindle quill 200 mm Spindle taper 5 MC Gap 400 mm Max. distance spindle – table 800 mm Max. distance spindle – base 1250 mm Spindle speeds 8 steps 56 – 1250 rpm Spindle feeds 8 steps 0,06 – 0,84 mm/rpm Weight 1000 kg Motor 4,0 / 3,3 kW – 380 Volt Accessoiries automatic spindle feeds Coolant Optie 4 spindle drillinghead ( Price € 1.000,- ) Condition Machine is in good condition
new
Code 99901 Description Pillar drill Make CABER Modell 58 R Serial No. Year New Table ( turnable ) 400 x 600 mm Base 540 x 640 mm Drilling capacity ( Steel 60 ) 40 mm Spindle quill 200 mm Spindle taper 4 MC Gap 400 mm Max. distance spindle – table 800 mm Max. distance spindle – base 1180 mm Spindle speeds 9 steps 90 - 1550 rpm Spindle feeds 4 steps 0,06 – 0,30 mm/rev Weight 500 kg Motor 3 kW – 380 Volt Accessoiries automatic spindle feeds Coolant Condition Unused
new
Code 99902 Description Pillar drill Make CABER Modell 59 R Serial No. Year New Table ( turnable ) 400 x 600 mm Base 540 x 640 mm Drilling capacity ( Steel 60 ) 50 mm Spindle quill 200 mm Spindle taper 5 MC Gap 400 mm Max. distance spindle – table 800 mm Max. distance spindle – base 1180 mm Spindle speeds 9 steps 65 - 1150 rpm Spindle feeds 4 steps 0,06 – 0,30 mm/rev Weight 500 kg Motor 3 kW – 380 Volt Accessoiries automatic spindle feeds Coolant Condition Unused
used
High performance vertical boring machine make ALZMETALL type Abomat 20Machine -No: 212, built in 1982Drilling capacity in St / GG: 25/30 mmOutreach: 280 mmSpindle mount: MK 38 speeds: 160 - 1800 rpm.6 feeds: 71 - 180 mm / min.Table mounting surface: 400 x 500 mmDrilling carriage stroke: 800 mmRapid traverse speed: 4.5 m / min.Weight approx: 530 kgDrive power: 1.45 / 1.9 kWWith- Multi-spindle head- semi-automatic work process- electrically controlled jump feed- Switch cabinet- swiveling operating part- Central lubrication- Cooling device type B with separate tank with pump- Semi-automatic tapping attachment with guide cartridge- Connection flange for mounting a multi-spindle head- Coolant inlet via distributor with inlet to eachxa0xa0 Spindle of the MSK with 1 cock each- Feed unit for drilling carriage movementused, in good conditionPrice on request.Delivery: ex warehouse or location free ...
used
High performance vertical boring machine make ALZMETALL type Abomat 20Machine -No: 273, built in 1985Drilling capacity in St / GG: 25/30 mmOutreach: 280 mmSpindle mount: MK 38 speeds: 160 - 1800 rpm.6 feeds: 71 - 180 mm / min.Table mounting surface: 400 x 500 mmDrilling carriage stroke: 800 mmRapid traverse speed: 4.5 m / min.Weight approx: 530 kgDrive power: 1.45 / 1.9 kWWith- Multi-spindle head- Cooling device type B- Semi-automatic tapping attachment with guide cartridge- Connection flange for mounting a multi-spindle headxa0xa0 with distributor and flexible inlet pipes with stopcock- Feed unit for drilling carriage movement- swiveling operating part- Central lubricationused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like ...
used
2-spindle series drilling machine make SOLID type R 10/210Mash. -No: 513307/08Drilling capacity in St 60:10 mmDrilling capacity in St 60:13 mmDrilling depth: 60 mmDischarge: 165 mm6 spindle speeds: 730 - 4150 rpm.Column diameter: 60 mmSpindle mount: B 16Table size: 500 x 200 mmSpindle distance: 300 mmDrive power: 2 x 0.37 kWDimensions L x W x H approx .: 610 x 450 x 650 mmWeight approx. 200 kgWith- Drill chuck 2 x- Vice 2 x- Base in table versionlittle used, from an operational resolutionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Underfloor drilling unit suitable for IMA - incompatible with a Weeke plug
used
Verticale drilling unit, 3 spindles suitable for IMA - incompatible with a Weeke plug
used
Column drilling machine Manufacturer Alzmetall Type AC25/AS Year of construction 1995 comes from a disabled workshop, was never used Main drive 1,1kW 1,000rpm Speed range main spindle two stages 75 - 5,800 rpm Feed drive automatic infinitely variable Feed speed 1 - 3.500mm/min Rapid traverse 3.5 m/min Tool holder MK3 Spidelkopf D 43mm Quill stroke 120mm Projection 295mm Column diameter 120mm Table clamping surface 390 x 420mm Number of T-slots x width x spacing 4 x 14 x 100 Table stroke 665mm Distance spindle-table max 665mm Distance spindle to bearing base plate 1020mm Base plate 765 x 475mm Machine height 1905mm, weight 380kg Coolant device, operating instructions incl. electrical wiring diagram Machine is in top condition.
new
bore capacity in steel (diameter): 32 mm throat: 257 mm bore stroke: 115 mm boring spindle: MK 4 boring chuck: 16 mm bore depth: 120 mm table surface area: 475 x 425 mm column diameter: 92 mm total power requirement: 1,1 kW weight of the machine ca.: 0,135 t dimensions of the machine ca.: 0,75 x 0,85 x 1,72 m Sturdy bench drill with - Keyless chuck - Drilling depth setting - emergency stop - Rotatable table top The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
bore capacity in steel (diameter): 50 mm throat: 360 mm bore stroke: 150 mm spindle turning speed range: 120 - 3000 U/min spindle taper: SK 40 : 650 mm : 320 mm vertical adjustment: 500 mm table surface area: 1000 x 300 mm connected load frequency: 400 V diameter of hob: max. 80 mm total power requirement: 2,2 kW weight of the machine ca.: 0,85 t dimensions of the machine ca.: 1,25 x 1.5 x 2,3 m New Model Industrial Drilling and Milling Machine with Manual Transmission and High Speed Range. The prism guide in the Z-axis ensures a high degree of precision even in the most difficult milling jobs. Domestic equipments: • automatic feed in X-axis • 3-axis digital display • motorized Z-axis • Feed in quill • Left-right-run high • tapping attachment • Gear head swiveling • Coolant system The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
bore capacity in steel (diameter): 16 mm throat: 170 mm bore stroke: 50 mm : 16 mm spindle taper: MK2 spindle turning speed range: 50 - 2250 U/min : 320 mm : 145 mm table surface area: 500 x 140 mm connected load frequency: 230 V total power requirement: 0,5 kW weight of the machine ca.: 90 Kg dimensions of the machine ca.: 0,5 x 0,45 x 0,84 m Drilling and milling machine with - variable spindle speed - Digital depth display - Left / right switch - Cross support - swiveling spindle head - Feeds via hand crank - Tool case with content but without digital display The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
bore capacity in steel (diameter): 32,0 mm throat: 255 mm bore stroke: 120 mm morse taper: 4 MK table:: 385 x 335 mm turning speeds: 80 - 2130 U/min total power requirement: 1,1 / 2,2 kW weight: 125 kg range L-W-H: 460 x 900 x 1730 mm Furnishing: - Surface-machined work table - Height adjustable via rack and hand crank - Ground base plate with T-slots for clamping high workpieces - V-belt drive with balanced drive pulleys for smooth running - Adjustable drilling depth stop for precise infeed of the quill - Powerful 2-stage motor, speed range from 80 - 2130 rpm - Direction of rotation switch for clockwise and counterclockwise rotation included in the scope of delivery - Cross line laser device for comfortable work - Compact, stable cast iron construction in a modern design - Stable and polished steel column, designed for heavy use Scope of delivery: - Drill chuck arbor MK 4 / B 18 - Keyl ...
new
bore capacity in steel (diameter): 30 mm throat: 198 mm bore stroke: 75 mm : 16 mm spindle taper: MK3 spindle turning speed range: 95 - 2840 U/min : 320 mm : 190 mm table surface area: 700 x 190 mm connected load frequency: 400 V max. distance between table and spindle-nose: 55 - 405 mm total power requirement: 1,1 kW weight of the machine ca.: 180 Kg dimensions of the machine ca.: 0,75 x 1,05 x 1,3 m Drilling and milling machine with - variable spindle speed - Digital depth display - Left / right switch - Cross support - swiveling spindle head - Feeds via hand crank - Tool case with content but without digital display The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
bore capacity in steel (diameter): 40 mm throat: 290 mm bore stroke: 115 mm spindle taper: SK 40 spindle turning speed range: 70 - 3200 U/min : 350 mm : 130 mm table surface area: 590 x 190 mm connected load frequency: 400 V diameter of hob: max. 80 mm feed: 0,1 - 0,18 - 0,26 mm/U total power requirement: 1,1 kW weight of the machine ca.: 0,4 t dimensions of the machine ca.: 0,7 x 0,95 x 1,75 m Drilling and milling machine - Cross Support - Cabinet - Swivel spindle head left / right 90 ° - Feed via hand crank The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
bore capacity in steel (diameter): 40 mm throat: 275 mm bore stroke: 120 mm spindle taper: MK 4 turning speed range: 75 - 3200 U/min : 190 mm : 490 mm table surface area: 700 x 210 mm connected load frequency: 400 V diameter of hob: max. 80 mm total power requirement: 1,1/1,5 kW weight of the machine ca.: 0,35 t dimensions of the machine ca.: 0,8 x 0,75 x 1,85 m Drilling and milling machine - Cross Support - Cabinet - Swivel spindle head left / right 90 ° - Feed via hand crank The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
bore capacity in steel (diameter): 32 mm throat: 200 mm bore stroke: 120 mm spindle taper MT: 4 MK table:: 290 x 270 mm column diameter: 92 mm turning speeds: 150 - 2450 U/min feeds: 0 mm/U total power requirement: 1,1 kW weight of the machine ca.: 95 kg range L-W-H: 0,66 x 0,8 x 1,7 m Column drilling machine with: ARBO / CE approved protective cover. Quick release chuck with pin. Tiltable work table. Deep stop. Ejector wedge. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
bore capacity in steel (diameter): 45 mm throat: 230 mm bore stroke: 125 mm spindle taper: ISO 30 spindle turning speed range: 75 - 1600 U/min max. milling cutter diameter: 80 mm : 560 mm : 230 mm table surface area: 800 x 240 mm max. distance between table and spindle-nose: 460 mm connected load frequency: 230 V total power requirement: 1,1 kW weight of the machine ca.: 320 Kg dimensions of the machine ca.: 1,0 x 0,8 x 1,45 m Drilling and milling machine - Cross Support - Cabinet - Swivel spindle head left / right 90 ° - Feed via hand crank The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
CHETTO INX2000 Deep Hole Drilling Machine This machine is used but in very good condition (200 working hours) Data sheet in the photos
used
Voortman V613 CNC beam drilling machine Horizontal Mitre Cutting bandsawing machine VB1050 Machine is in very good condition Single axis
used
Fast drilling Manufacturer Yougar Model YGS42 year 2015
new
bore capacity in steel (diameter): 30 mm throat: 255 mm bore stroke: 110 mm spindle speed:: 80 - 3490 U / min table-size: 400 x 400 mm spindle taper MT: 4 turning speed range:: 2 x 12 Stufen column diameter: 88 mm base plate: 600 x 370 mm total power requirement: 1,1 kW weight of the machine ca.: 155 kg dimensions of the machine ca.: 1,15 x 0,65 x 0,32 m Topline type heavy duty column drilling machine. For easy, frequent use. The drill chuck cover is made of high quality polycarbonate, and complies with the latest safety standards. It is equipped with an autostop switch. Separate emergency stop can be reached easily. Fitted out with a cooling table, softgrips,, adjustable depth stop and quick-acting drill chuck. The machine is equipped with a thermal cut-out. quick-acting drill chuck 1- 16 mm engraved nonius machine stops when drill chuck cover is opened depth stop autostop switch when o ...
used
The PB.04N is a professional 4-spindle paper drilling machine with extensive standard equipment. The PB.04N paper drill offers variable speed, variable lifting speed, drill belt, drill cooling, drill lubrication, robust sliding table, spacers for quick and precise adjustment of the drill heads. This makes it possible to drill large print runs, plastic, art print or laminated paper. In tip mode, drill bits of different lengths can be brought to the same length without tools. The side and rear stop can be adjusted without tools. Using the snap-in hole pattern program bar, any individual hole patterns can be scaffolded with a flick of the wrist. Specifications up to 50mm stack height Speed control and stroke cycle control 3 - 14mm Paper Drill Bit up to 42mm hole distance to the blade edge 7 - 293mm hole spacing over sliding table Robust sliding table with hole pattern program strip ...
new
bore capacity in steel (diameter): 16 mm throat: - mm bore stroke: - mm spindle taper: MT2 spindle turning speed range: 400 - 4000 U/min Table dimensions: 365 x 455 mm base plate: 530 x 365 mm voltage: 400 V column diameter: 75 mm total power requirement: 0,75 kW weight of the machine ca.: 130 t dimensions of the machine ca.: m Heavy duty v-belt driven column drilling machine with variable speed. table and head height adjustable swivelling head flexible LED light quick-acting drill chuck 3-16 mm (B16) t slots high speed The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Tapping capacity: 0 mm Drilling capacity: 0 mm Throat: 0 mm Tapping depth: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Max.cutting capacity in steel: 6 M (Metric) Max.cutting cap. in cast-iron: 8 M (Metric) Spindle stroke: 40 mm Spindle speeds: number (steps): 4 from: 600 rpm up to: 1800 rpm Depth of throat: 100 mm Table length: 180 mm Table width: 180 mm Max. distance spindle to table: 215 mm Voltage 50 Hz 3x: 380 Volt Spindle motor: 0.50 kW Overall dimensions machine: Length: 700 mm Width: 250 mm Height: 500 mm
used
Drilling capacity: 0 mm Throat: 0 mm Spindle taper: 0 CNC Brand: 0 CNC Model: 0 Control: GE MARK CENTURY ONE PLUS Technical data number of tools Drill capacity in steel: 23 mm Spindle speeds :steps: 9 from: 42 rpm up to: 3500 rpm Table length: 820 mm Table width: 400 mm Longitudinal travel: 400 mm Transversal travel: 320 mm Vertical travel: 470 mm Feeds: 1000 mm/min Rapid traverse:: 3.5 m/min Voltage 50 Hz 3x: 380 Volt Power: 2.5 kW
used
Drilling capacity: 0 mm Throat: 0 mm Spindle taper: 0 CNC Brand: 0 CNC Model: 0 Technical data Table length: 500 mm Table width: 490 mm Clamping surface: Length: 355 mm Width: 315 mm T-channel width: 23 mm Drill capacity in steel: 22 mm Drill capacity in cast-iron: 24 mm Taper in spindle: MT: 3 Depth of throat: 300 mm Drill depth (spindle stroke): 120 mm Spindle speeds: stepless from: 250 rpm up to: 400 rpm Feeds: stepless from: 0.02 mm/r up to: 0.25 mm/r Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.0 / 1.5 HP Machine´s weight about: 990 kg Overall dimensions machine: Length: 1330 mm Width: 900 mm Height: 1800 mm Various accessories: Threading device Drill chuck Lamp Quick change device Adjustable depth stop
used
Drilling capacity: 0 mm Throat: 0 mm Spindle taper: 0 CNC Brand: 0 CNC Model: 0 Technical data Table length: 400 mm Table width: 390 mm Clamping surface: Length: 300 mm Width: 230 mm T-channel width: 12 mm Taper in spindle: MT: 2 Spindle speeds: number (steps): 6 from: 75 rpm up to: 5000 rpm Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 250 kg Overall dimensions machine: Length: 720 mm Width: 660 mm Height: 1800 mm Various accessories: Drill chuck: 1 - 13 mm Adjustable depth stop
used
Drilling capacity: 0 mm Throat: 0 mm Spindle taper: 0 CNC Brand: 0 CNC Model: 0 Technical data Drill capacity in steel: 6 mm Table length: 310 mm Table width: 280 mm Depth of throat: 150 mm Spindle stroke: 50 mm Spindle speeds: number (steps): 8 from: 650 rpm up to: 12000 rpm Voltage 50 Hz 3x: 380 Volt Power: 0.30 HP Machine´s weight about: 50 kg Overall dimensions machine: Length: 600 mm Width: 350 mm Height: 650 mm Various accessories: Drill chuck: 0 - 6.5 mm Lamp
used
Drilling capacity: 0 mm Throat: 0 mm Spindle taper: 0 CNC Brand: 0 CNC Model: 0 Technical data Drill capacity in steel: 18 mm Table length: 430 mm Table width: 340 mm Depth of throat: 225 mm Spindle stroke: 110 mm Spindle speeds: stepless from: 132 rpm up to: 4500 rpm Voltage 50 Hz 3x: 380 Volt Power: 0.45/1.1 kW Machine´s weight about: 650 kg Overall dimensions machine: Length: 1100 mm Width: 900 mm Height: 1950 mm Various accessories: Digital readout number of axis:: 2 Manufacturer: ELESTA
used
Drilling capacity: 0 mm Throat: 0 mm Spindle taper: 0 CNC Brand: 0 CNC Model: 0 Technical data Table length: 700 mm Table width: 370 mm Drill capacity in steel: 22 mm Drill capacity in cast-iron: 24 mm Depth of throat: 300 mm Drill depth (spindle stroke): 120 mm Spindle speeds: from: 250 rpm up to: 4000 rpm Voltage 50 Hz 3x: 380 Volt Spindle motor: 2 HP Machine´s weight about: 990 kg Overall dimensions machine: Length: 1100 mm Width: 600 mm Height: 2100 mm Various accessories: Tool storage Lamp Digital readout number of axis:: 2 Motorized table adjustment
used
This ERLO TH-40 (2017) Drilling machine was manufactured in the year 2017 in Spain and has 4080 production hours. It is equipped with a Mitsubishi M700V/M70v Series contoller (Spindle speed: 750 - 4000rpm).
used
This CHETO 3000 Drilling machine was made in 2014 and has 9700 production hours. The machine has a spindle speed of 6000 rpm.
used
This FICEP 3003/12 GDD CNC automatic drilling lines for welded beams and welded structures was made in the year 2016 in Italy. The machine has a spindle speed of 5000 rpm and 6 axis.
used
Drilling capacity: 0 mm Throat: 0 mm Spindle taper: 0 CNC Brand: 0 CNC Model: 0 Technical data Drill capacity in steel: 12 mm Table length: 350 mm Table width: 280 mm Depth of throat: 200 mm Spindle stroke: 100 mm Spindle speeds: stepless from: 400 rpm up to: 6000 rpm Distance from table to spindle nose: max: 400 mm Voltage 50 Hz 3x: 380 Volt Overall dimensions machine: Length: 900 mm Width: 650 mm Height: 1850 mm Various accessories: Drill chuck Lamp Cast-iron base
used
Drilling capacity: 0 mm Throat: 0 mm Spindle taper: 0 CNC Brand: 0 CNC Model: 0 Technical data Drill capacity in steel: 2 - 22 mm Max. drill depth: 120 mm Table length: 500 mm Table width: 400 mm Spindle speeds: stepless from: 50 rpm up to: 4000 rpm Power: 1.5 HP Machine´s weight about: 150 kg Overall dimensions machine: Length: 400 mm Width: 500 mm Height: 1000 mm
used
Drilling capacity: 0 mm Throat: 0 mm Spindle taper: 0 CNC Brand: 0 CNC Model: 0 Technical data Drill capacity in steel: 13 mm Table length: 400 mm Table width: 350 mm Depth of throat: 200 mm Spindle stroke: 120 mm Spindle speeds: number (steps): 10 from: 350 rpm up to: 5000 rpm min.: 30 mm max: 330 mm Voltage 50 Hz 3x: 380 Volt Power: 1.00 HP Machine´s weight about: 260 kg Overall dimensions machine: Length: 800 mm Width: 550 mm Height: 600 mm
used
Webo in-line drilling machine - 2 machines: speed 90 - 1000 1/min. - 4 machines: speed 4000 - 6000 1/min. - Coolant device - Tool holder: MK2 - Width: 200 cm - Height: 200 cm - Depth: 100 cm Good condition fully functional can be visited and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article, in order to avoid misunderstandings, can be viewed before the purchase and tested under electricity. Please ask questions before buying to avoid ambiguity. For general questions or an appointment for a viewing, I can be reached at any time at the telephone number below or above. Errors in the description and prior sale excepted. VAT will be shown separately on my invoices. Shipping with freight forwarder.
used
Paper drilling machine Nagel Citoborma 280 AB
used
Unused, Automatic cooling system, drilling depth 210mm, adhesion force 16000 N, Speed up to N = 830 rpm, power 1600 kw,
used
Unused, Automatic cooling system, drilling depth 210mm, adhesion force 16000 N, Speed up to N = 830 rpm, power 1600 kw,
used
Unused, Automatic cooling system, drilling depth 210mm, adhesion force 16000 N, Speed up to N = 830 rpm, power 1600 kw,
used
Unused, Automatic cooling system, drilling depth 210mm, adhesion force 16000 N, Speed up to N = 830 rpm, power 1600 kw,
used
Drilling capacity: 32 mm X - axis: 0 mm Y - axis: 0 mm Distance between the columns: 0 mm Spindle taper: 0 MACH-id 5341 MAKE Kaltenbach APS TYPE APS 603 YOP 1999 SPECIFICATIONS Max. drill Ø steel 32 mm Spindle Taper ISO/Bt/Mk MK ISO/Bt/Mk Power 25 kW DIMENSIONS Length 3500 mm Width 2000 mm Height 2600 mm
used
Drilling capacity: 32 mm Radius: 1000 mm Spindle taper: 32 SPECIFICATIES Uitlading / arm lengte 1000 mm Boor capaciteit 32 mm Boor capaciteit staal Ø 32 mm Boor capaciteit gietijzer Ø 40 mm Tap capaciteit M M 32 Spindel pinole opname Mk Mk 4 Spindel diameter Ø 70 mm Spindel pinole slag 220 mm Max. afstand spil - tafel 1030 mm Min. afstand spil - tafel 330 mm Tafel / voet afmeting lengte x breedte 1070 x 515 mm Vermogen kW 3 kW Toeren - Snelheden - Stappen 1300 Rpm
used
Drilling capacity: 40 mm Radius: 800 mm Spindle taper: 36 SPECIFICATIES Uitlading / arm lengte 800 mm Boor capaciteit 40 mm Boor capaciteit staal Ø 40 mm Boor capaciteit gietijzer Ø 50 mm Tap capaciteit M M 36 Spindel pinole opname Mk Sk 40 Spindel diameter Ø 195 mm Spindel pinole slag 200 mm Max. afstand spil - tafel 695 mm Tafel / voet afmeting lengte x breedte 1200 x 750 mm Vermogen kW 5.5 kW Toeren - Snelheden - Stappen 2800 Rpm
used
Rotational speed: 133-700/min, drilling diameter: 1-50mm.