drilling press used for sale

WEIBERT WJ-LB2 Long-hole drilling machine WEIBERT WJ-LB2 400V 2.2 KW ( 3 hp) n=2840 min. Drilling table size 600x320mm Drilling table height 870mm Drilling depth 245mm Drilling width 205mm Height adjustment 165mm Swivel ling unit swivel -45°/90°/+45° Machine table made of GREY ING! Manual adjustment with handwheel! AGGREGAT AND TABLE FROM MACHINE GREY! G&WJ-LB2 option: Dowel drilling device available with pitch 16-22-25 and 32mm G&WJ-LB-DÜBEL

In the inlet: Presto CC 40 M baler with lift-tilt device Specifications: Manufacturer: Presto Type: CC 40 M Year of Make: 2017 Press force: 40 t Cycle time: 34 s Drive power: 15 kW Filling opening: 1080 x 1100 mm Filling volume: 0.85 m³ Binding: 4-ply, polyester strap, manual Throughput at bulk density of 35 kg/m³ - 1.8 t/h 60 kg/m³ - 2.5 t(h 100 kg/m³ - 3.1 t/h Bale dimensions: 750 x 1100 mm Bale weight: 400 kg Dimensions: 3650 x 1590 x 2010 mm (LxWxH) Machine weight: approx. 3800 kg Materials: paper, cardboard, foil Remark: Fully automatic regulating channel outlet, lift-tilt device for MGB 660, 770 and 1100 L empty containers. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any tim ...

250 ton x 3000mm MASSIVE SPECIFICATION €100,000 EUR Tooling package!

mobile compressed air with stainless steel sheets metrics: Length: 1.44 m Width: 0.36 m Height: 0.16 m

150 ton x 4000mm

Stationary high-pressure pump unit Hammelmann HDP 122 on base frame without motor. Similar but no Kamat, Uraca, Woma. Pump type: HDP 112 Operating pressure: 530 bar Flow rate: 55 l / min. Drive speed: 1500 rpm. Drive power: 55 kW without engine, with pressure control valve, Bwfz23o8wi with safety valve, with oil cooling system. Dimensions LxWxH: approx. 2000x1000x1400 mm Weight: approx. 300 kg Year of construction: 1998 Condition: in good used condition.

In the pipeline: Baler Dixi 60 SLS, year of manufacture 2013 Specifications: Manufacturer: Maschinenfabrik Bermatingen Year of Make: 2013 Pressing force: 60 t Drive power: 11 kW, 32 A Filling opening: 990 x 1110 mm (WxL) Bale dimension: 1100 x 800 x 1200 mm Bale weight: approx. 370-450 kg Binding: 3-fold manual Machine dimensions: approx. 4870 x 2100 x 2150 mm (LxWxH) Weight: approx. 5220 kg Materials: PET, paper, cardboard, foil The operating instructions and EC declaration of conformity are available in German. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale against advance payment is made ex works, without warranty or guarantee.

Bread Press Fortuna Automatic A 3 H + Dough dividing and rounding machine Bread Press TOP Model Fortuna Automat Gr. 3+ with active shutdown Intervention protection with protective corners Head cleaning to the rear electrically Part head with stainless steel knife Dough insert up to 2400g depending on TA Dough divider with 3 knitting plates Connection 400V,16A-CEE plug Dimensions: 720 x 800 x 1510 mm WxDxH Used machine + spare parts service Quality from a specialist company! Benefit from over 35 years of experience! Option: Platform or chassis Cast Plate Service Package Maintenance contract E-Box for more safety Delivery Instruction & Commissioning

For sale automatic press PTV 65 produced from SACMI Italy for ropp caps. Tools for 25mm and for 28mm ropp caps.

Rotary tablet press without machine signs with 2 stamp sets 12 and 14 mm 22 kg per hour, with powder mixer both are functional

Exhibition machine MOVE - the high-precision vacuum press with a gigantic usable surface for vacuum form gluing and vacuum veneering of bent workpieces. With total flexibility, due to total mobility and revolutionary folding mechanism, to reduce the footprint to 45% when folded. High-precision vacuum press with flap opening incl. ⦁ Revolutionary folding mechanism (reduction of the footprint to 45%) ⦁ 40 m³ high-performance vacuum pump (up to 900 mbar (9 t/m²)) optional, automatic shutdown when pressure is reached (with large vacuum volume) ⦁ Pressure regulation 400 to 900 mbar, analog vacuum pressure display ⦁ Highly elastic natural rubber membrane (up to +130 °C) ⦁ Diaphragm quick-change system ⦁ Stable phenolic resin worktop (up to +160 °C) ⦁ Gas pressure damper for flap opening ⦁ Vacuum pressure display ⦁ Connection for external vacuum bag ⦁ Smo ...

NOTE additionally a new shaft Description Force , 4000 TN Slide stroke, mm 400 Number of continuous slide stroke, stroke / min 50 Closed height of stamping space mm 1000 Adjusting the table mm 15 Distance between columns in light,mm 1660 Drive power, kW 185 Table dimensions in plan mm: - From left to right in 1620 - Front-to-back in 1570 Dimensions in mm: - in the plan 6100 x 4710 - Height above floor level 6820 - Press height 8680 Weight, t 377

ManuMatik / KraussMaffei High Pressure Cylinders The high-pressure cylinders come from a commutator press and were used there until the end. Total height 184 cm Cylinder height 150 cm Circumference of the rod 28 cm Diameter 8.90 cm The following components are also installed Check Valves z2S16-1-51 Pressure Reducing Valve Zdr 6 dp0-45/40ym w80 Scope of delivery: 1 x pressing unit Complete plant closure, large selection of mezzanines, pallet racks, shelving racks, paternosters. High Quality Industrial Machinery, Lathes, Grinding Machines, Hand Machinery Suppliers in China More items - new and used - can be found in our shop! International shipping costs on request!

Vertical baler HSM VL 600, built in 2002 Specifications: Manufacturer: HSM Type: HSM VL 600 Year of Make: 2002 Pressing force: 60 t Drive power: 7.5 kW Idle cycle time: 37 s Filling height: 1130 mm Filling opening: 1150 x 735 mm Bale size: 1200 x 1100 x max. 1200 mm Bale weight: 550 kg Weight: 3575 kg Materials: paper, cardboard, foil Remark: The instruction manual is available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale is made ex location, without guarantee and guarantee. Our payment term is 100% prepayment.

3× Briquette press Di Più MB100 – built in 2009 – complete line with saws & accessories For sale are 3 pieces of briquette presses of the type Di Più MB100, built in 2009, including saws, conveyor technology and other accessories. The machines come from industrial use and are ideal for the production of wood briquettes from sawdust, shavings and wood residues. ⸻ Technical data (per machine): Type: Di Più BRIK MB100 Year of Make: 2009 Briquette diameter: approx. 90 – 110 mm Production capacity: approx. 1,300 – 2,300 kg/h Press pressure: approx. 2,000 – 2,500 kg/cm² Main motor: 75 kW Total power: approx. 98 kW Material moisture: optimal 8 – 12 % Grain size: approx. 1 – 12 mm Weight: approx. 7,800 kg per machine Drive: hydraulic piston press ⸻ Equipment: Material hopper Screw conveyors Hydraulic Cabinets Saws for briquette length cutting ...

3× Briquette press Di Più MB100 – built in 2009 – complete line with saws & accessories For sale are 3 pieces of briquette presses of the type Di Più MB100, built in 2009, including saws, conveyor technology and other accessories. The machines come from industrial use and are ideal for the production of wood briquettes from sawdust, shavings and wood residues. ⸻ Technical data (per machine): Type: Di Più BRIK MB100 Year of Make: 2009 Briquette diameter: approx. 90 – 110 mm Production capacity: approx. 1,300 – 2,300 kg/h Press pressure: approx. 2,000 – 2,500 kg/cm² Main motor: 75 kW Total power: approx. 98 kW Material moisture: optimal 8 – 12 % Grain size: approx. 1 – 12 mm Weight: approx. 7,800 kg per machine Drive: hydraulic piston press ⸻ Equipment: Material hopper Screw conveyors Hydraulic Cabinets Saws for briquette length cutting ...

pressure vessel Brand:Udo Kleusberg Type: 448 Year of construction: 2003 Volume: 15o liters Pressure: 11 bar All information without guarantee

Key data: 40 t, 1030 mm

For sale is an automated press brake with 1st hand robot system for serial sheet metal part forming. Press brake 2019 BYSTRONIC Xpert 40/1030 Robot 2019 KUKA KR10R 1100 sixx Specifications Press brake - Press force: 400kN (40t) - Working length: 1030mm - Control: ByVision Robot - Max. nominal load capacity: 11kg - Reach: 1100mm - Axles: 6-axle - Position repeatability: 0.02mm - CE certified safety modules Characteristics - Fully automated bending cell with integrated 6-axis industrial robot - from 1st hand - Dimensions (LxWxH): approx. 3.25m x 2.8m x 2.5m - ByVision Bending control terminal with 22-inch Full HD touchscreen Machine condition - Operating hours: 7,724 h - Cycle counter: 310,212 - Complete service history, regular inspections - Technically perfect condition - Functional test: can be demonstrated during inspection - Location: Niederroh ...

Press brake TRUMPF TrumaBend V 85 Year of construction 1999 Machine specifications: working length 2050 mm - Stand passage 1750 mm - pressing force 850 kN - Distance table / plunger 410 mm - Stand projection 410 mm - Plunger stroke 285 mm - Lifting speeds - Downward speed rapid path 200 mm/sec - Upward speed 135 mm/sec - Downward press speed 1 - 11 mm/sec - Total drive power 13 kVA - Space requirement approx.B 3700 x H 2700 x D 2100 mm - Weight approx. 8000 kg

In the pipeline Baler Dixi 60 SLD, built in 2016 Manufacturer: Maschinenfabrik Bermatingen Type: Dixi 60 SLD Year of Make: 2016 Drive power: 7.5 kW, 400 V / 32 A Filling opening: 990 x 1,110 mm (WxL) Pressing force: 60 t Pressing cycle: approx. 47 s Bale size: 800 x 1,100 x 1,200 mm (WxHxL) Bale weight: approx. 370-410 kg Binding: 3-fold, manual Machine dimensions: approx. 4,150 x 1,725 x 2,035 mm (LxWxH) Machine weight: approx. 5,420 kg Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale against advance payment is made ex works, without warranty or guarantee.

In the pipeline Baler Dixi 60 SLD, built in 2012 Manufacturer: Maschinenfabrik Bermatingen Type: Dixi 60 SLD Year of Make: 2012 Drive power: 7.5 kW, 400 V / 32 A Filling opening: 990 x 1,110 mm (WxL) Pressing force: 60 t Pressing cycle: approx. 47 s Bale size: 800 x 1,100 x 1,200 mm (WxHxL) Bale weight: approx. 370-410 kg Binding: 3-fold, manual Machine dimensions: approx. 4,150 x 1,725 x 2,035 mm (LxWxH) Machine weight: approx. 5,420 kg Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale against advance payment is made ex works, without warranty or guarantee.

In the pipeline Baler Dixi 80 SLD, with lift/tilt device, semi-automatic, year 2021 Manufacturer: Dixi Type: Dixi 80 SLD Year of Make: 2021 Drive power: 11 kW, 400 V / 32 A Filling opening: 1,040 x 1,110 mm (WxL) Press force: 80 t Pressing cycle: approx. 35 s Capacity: approx. 1000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (WxHxL) Bale weight: approx. 500-600 kg Binding: 4-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (LxWxH) Machine weight: approx. 8,000 kg Materials: paper, cardboard, cardboard The operating instructions are available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale against advance payment is made ex w ...

OCEM OPA 650 – COMPLETE PLATE PRODUCTION LINE – Main Engine: · Brand: OCEM · Model: OPA 650 · Year of manufacture: 2005 (complete overhaul in 2011) · Pressing force: 300 TON · Mold sets: 30 x 30 cm; 33 x 33 cm; 40 x 40 cm; 40 x 60 cm · Production capacity: approx. 300 m² / 8 h · Rubber sets: available in different sizes · Pre-concrete feeders, rear concrete wagons · Recirculation system for residual concrete · Electrical control cabinet, hydraulics, pneumatics Vertical Removal Robot · Pallets: over 300 pieces Additional equipment: · CASSANI sandblasting machine, belt width 60 cm · VISMAR Exposed Concrete Washing Machine / 4-Head Grinding Machine (3+1) Complete pre-concrete preparation unit: · Day silos, mixers, weighing belts, etc. OCEM OPA 650 Complete prod ...

pressure: 160 t chamfer lenght: 4000 mm distance between columns: 3060 mm control: FORTRON CNC 10 H 4 throat: 280 mm stroke: 250 mm dayligth: 500 mm table length: 4050 mm table width: 280 mm feed down: 70 mm/sec feed up: 68,4 mm/sec working feed: 9 / 3,5 mm/sec operating pressure: max. 205 bar oil volume: 400 l total power requirement: 19,5 kW weight of the machine ca.: 20,8 t Total weight including accessories: 22 t dimensions of machine L x W x H: 4,8 x 1,88 x 2,93 m dimensions of switch cabinet: 1,6 x 0,5 x 2,25 m Acc.: programmable back gauge, upper and lower dies, table extensions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Falch Trailjet 15 Pressure Washer 500bar , 95 °C Mint condition - Manufacturer: Falch - Type: Trail Jet 15 - Registration date 07/21 - Working pressure: 500bar - Volume flow: 15 l/min - Cold and hot water up to 95 °C - Operating hours: approx. 481 h - German papers Accessories: - Optional Price excluding VAT! Net price: 32.900,00€ Additional options (subject to surcharge) - Europe-wide delivery - Falch Scater - Pistols - Hoses - Nozzles For more data, please refer to the pictures. The item can be viewed and tested before purchasing. Device Location: 3232LN Brielle, Netherlands We are also happy to accept your machine in trade-in. CLIC Industrial Rental For 20 years, we have specialized in the field of high pressure, trade, stone cleaning, industrial cleaning and much more.

pressure: 200 t chamfer lenght: 3000 mm distance between columns: 2560 mm dayligth: 450 mm throat: 450 mm adjustment of stroke: 240 mm horn length over column outer edge each: 175 mm table length: 3050 mm table width: 280 mm table height over floor: 820 mm electrics - voltage/frequency: 220/50 V/Hz control: CYBELEC, DNC60 stroke: 250 mm operating pressure: 150 bar total power requirement: kW weight of the machine ca.: 15 t dimensions of the machine ca.: L:4,0 x B:3,2 x H:3,44 m • hydraulical press brake, • new control CYBELEC DNC60 (in 2005), • lower part of the machine moves down 500 mm to the floor, at the moment the machine is mounted on a double-T-support, • prism and upper part of the machine in 3000 mm length The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Falch T3H Pressure Washer 300bar, 98 °C - Manufacturer: Falch - Type: T3 H - Year: 2008 - Working pressure: 300 bar - Volume flow: 21 l/min - Generator: 230 V - Cold and hot water up to 98 °C - Operating hours: approx. 3158 h - New HD pump Accessories: - Optional Price excluding VAT! Net price: 19.900,00€ Additional options (subject to surcharge) - Europe-wide delivery - Falch Scatee - Pistols - Hoses - Nozzles For more data, please refer to the pictures. The item can be viewed and tested before purchasing. Device Location: 3232LN Brielle, Netherlands We are also happy to accept your machine in trade-in.

Table dimensions: 1000,400 mm pneumatic clamping: 2 St. moveable: Option For quick pressing of Minizinken- or Soflineverbindungen - Independent of the angle - Particularly suitable for arched manufacturing in window - Table size 1000 x 400 mm - Pneumatic connector 10 bar - Air consumption: 0.5 cdm / stroke - Two clamping cylinders for workpiece clamping - Right half of the table stored on hardened shafts via linear ball bearings - 1 pressure cylinders for linear displacement table - CE - execution (technical data according to manufacturer - without guarantee.!) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Baler Paal Konti 200 D, built in 2000, optionally with matching conveyor belt Paal KEM-1400 Technical data: Manufacturer: Paal Type Paal Konti 200 D Year of construction 2000 Hours: 28155 Pressing force 60 t Drive power 45 kW Total connection 60 kW Filling opening 1020 x 1400 mm Bale dimensions 750 x 1100 mm, length variable 4-fold automatic tying throughput at 35 kg/m³ approx. 9.5 t/h 60 kg/m³ approx. 16.5 t/h 100 kg/m³ approx. 26 t/h Bale weight 450 to 650 kg Transport dimensions approx. 10123 x 2152 x 2720 mm (LxWxH) Machine weight approx. 15,000 kg Materials: paper, cardboard, foil The press is in good condition and has been inspected and tested. You can find a video on our website or YouTube channel. The complete documentation is available. Please note: All technical data refer to the manufacturer's specifications. We a ...

For sale is a used pelleting line that has been pelletizing wood fiber-based fertilizer with cattle manure and digestate for the past four years (approximately 5,000 hours total). It incorporates components from various well-known manufacturers, including the Amandus KAHL pellet press/continuous mixer, Bühler hammer mill/conditioner, CPM pellet cooler, Wynveen pellet screen, and Rako/Apullma conveying technology. Capacity: 1. Wood chips with dried cattle manure: approx. 1.5 t/h 2. Dried, separated compost/dried digestate: approx. 2.5 t/h 3. According to the manufacturer, KAHL, the press can process up to 3 t/h of biomass. The customer is now restructuring their operations, making this line available for sale. The preferred option is to sell the entire line, but individual components can be purchased separately by arrangement. The customer is primarily seeking to sel ...

pressure: 300 t chamfer lenght: 3050 mm distance between columns: . mm Control: Cybeleg type: DNC880S total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

press capacity: 250 t spindle diameter: 160 mm ram stroke range: 180 mm stroke speed: 71 Hub/min column daylight: 450 mm table surface area: 560x450 mm ram surface: 450x400 mm total power requirement: 12 kW weight of the machine ca.: 9 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Qty.1 Second-hand deep drawing press Mfc.: LVD Co. Type: EMF-TWI- 200SP Built: 1982 Stopped production in 2002 Tested in 2012 In operation condition! Max. pressure: 200 T (2000 kN) Max. oil pressure: 300 bar Max. hydr. stroke: 2300 mm Max. distance table – ram: 4500 mm Motor power: 250 HP (187 kW) Table & ram dim.: dia. 300 mm Closing speed: 160/80 mm/sec. Working speed: 3507175 mm/sec. Cushion Max. capacity: 2 x 1000 kN Max. oil pressure: 300 bar Max. hydr. stroke: 2000 mm Table dim.: 1800 x 1800 mm Motor power: 75 HP (56 kW) Plate holder Plate holder dim.: 250 mm Plate holder stroke: 1000 mm Motor power: 25 HP (19 kW), 3 x220 V Weight: 75 Ton Pumps Main pump: 3 x A7V355LV 1RPFHO Pilot pump: Vickers V210-5-1A-10-5214 Tank Volume: 3350 L

Working width: 3500 mm Working height: 2300 mm Number of cylinders: 4 St. Stable frame welded construction of thick-walled Special hollow profiles , sliding table and pressure beam with 50 mm hole pattern . On the left side continuous abutment for grouting the wide , lower abutment in 2 levels. Vertical pressing cylinder on specialty bar with one- quick adjustment with weight compensation in the 50 mm hole pattern adjustable in height. Long sliding table ensure the continuous recording of high jacking forces . Fast, smooth width adjustment with ball bearing Carriage with central fixation in 50 mm hole pattern. Upper horizontal press cylinder infinitely adjustable in height and equipped with counterbalance . Lower horizontal pressing cylinders with bore for two abutments levels without weight compensation . Abutment and pressure plate depth 100 mm Machine controlled electro -hydraulic wit ...

1015 KW Dresser counterpressure steam turbine for sale. 35.000 € plus VAT FCA freely charged in D-Bergisch Gladbach. TUBRINE Brand: DRESSER-RAND (Nadrowski) Type: AVT 72 TW 17 Number: 16225-1 Electr. Power: 1015 KW Rated power: 1375 kVA Year of construction: 1995 (control units upgraded in 2008) Voltage: 400 V RPM: 1500 rpm Steam flow rate: 25 tons /h Dimensions (l x w x h): 4.50 x 2.40 x 2.30 m Inlet temperature: 253°C Inlet pressure : 18 bar Exhaust temperature : 152°C Outlet pressure : 5.0 bar Steam flow rate at the entrance: 25 tons/h Turbine weight: 11,000 kg Generator Brand: Leroy Somer Type: NWR 50 BL10-4P Electrical power : 1015 KW SWITCHBOARD Manufactured by TIL SA and updated in 2008 Schneider control

Baler Dixi 60 SLS, year of manufacture 2013 Technical data: Manufacturer: Maschinenfabrik Bermatingen Year of Make: 2013 Pressing force: 60 t Drive power: 11 kW, 32 A Filling opening: 990 x 1110 mm (WxL) Bale dimension: 1100 x 800 x 1200 mm Bale weight: approx. 370-450 kg Binding: 3-fold manual Machine dimensions: approx. 4870 x 2100 x 2150 mm (LxWxH) Weight: approx. 5220 kg Materials: paper, cardboard, foil The press is in good, working condition and has been inspected and tested by us. You can find the video on our website or YouTube channel. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale against advance payment is made ex works, without ...

: 3400,4550 mm Working height: 2500 mm : 300 - 800 mm Glazing and control press RU-VGP3 Glazing and sealing press, clamping width max. 3150 mm, Length 3400 mm, width 900 mm, height 2500 mm, contact height 1900 mm, Pressing beam height 2400 mm, plant part covered with felt, installation surface as roller conveyor, lifting device from 300 - 800 mm. Left and right each a role as edge protection for elements up to 2500 mm height. (When ordering specify whether RIGHT or LINKER Pressbar mobile!) alternatively: ------------- RU-VGP4 Glazing and control press, version like RU-VGP3 however span max. 4000 mm, length 4550 mm (When ordering specify whether RIGHT or LINKER Pressbar mobile! (technical data according to manufacturer - without guarantee!) Price on request ! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Baler Dixi 80 SLD, with lift/tilt device, semi-automatic, year of construction 2019 Manufacturer: Dixi Type: Dixi 80 SLD Year of Make: 2019 Drive power: 11 kW, 400 V / 32 A Filling opening: 1,040 x 1,110 mm (WxL) Press force: 80 t Pressing cycle: approx. 35 s Capacity: approx. 1000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (WxHxL) Bale weight: approx. 500-600 kg Binding: 4-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (LxWxH) Machine weight: approx. 8,000 kg Materials: paper, cardboard, foil The press is in good condition. It has been checked and tested by us. You can find a video on our website or YouTube channel. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visi ...

Elegant effects for book covers and packaging For industrial embossing of solid grey board in bookbinding and in the further processing of fine packaging. The stabilized embossing head guarantees precise embossing even with non-centred embossing clichés. For blind, relief or film embossing of rigid, flexible and plastic cases at up to 80 cycles/min. The PE 312 processes the whole bandwidth of cover materials with blind, relief or film embossing. Can be adapted for optimal processing of different materials by stepless adjustment of temperature and embossing pressure and by adjusting embossing time in steps of 10 seconds. Matrix plate with hole grid for attaching embossing blocks. Save make-ready time by preparing the matrix plate offline. Application : • Blind, relief or hot foil stamping • Combination of micro-embossing and structure embossing Technical data : Hardcover 1 ...

pressure: 300 t working feed: 9 / 14 mm/sec stroke: 600 mm column daylight: 1550 mm : 600 adjustment of press crosshead: 1500 mm slide adjustment -horizontal: 3000 mm tank capacity: l feed speeds: 9 mm/sec return speed: 14 mm/sec total power requirement: 18,5 kW weight of the machine ca.: 35 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Press force max.:: 1.000 kN heating plates:: 500 x 500 mm electrically heated:: °C heating power:: kW piston stroke:: ca. 500 mm no. of stages:: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure control valve, R6V10 595 W0 B1 220, Denison, mint condition Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Mint condition! - never been used and is in mint condition, 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian law applies without exception and court location St. Pölten.

pressure: 320 t throat: 800 mm stroke: 630 mm distance between table / ram: max. 1000 mm ram head dimension: 710 x 600 mm table-size: 800 x 1200 mm work height max.: 1015 mm quantity of oil: 1100 l Number of working hours: 7663 h weight of the machine ca.: 15 t dimensions: ca. 1600 x 2200 x 4800 mm dimensions of switch cabinet: ca. 1200 x 400 x 1800 mm Tested for function. During the test run it is noticed that the press ram not 100% leak-proof. In addition, the cable for manual operation was mended several times. Upper cover is missing, since this was dismantled by the customer due to crane use. Operating instructions and electrical plans available. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.