drilling press used for sale

High quality - Low price! Radial drill MAS VR5A Arm 1600mm Max dia in steel 50mm Max dia in cast iron 60mm Max threading in steel M30 Max threading in cast iron M42 MT 4 Spindelmotor 4 kW - 28 - 2500 RPM Distance table-spindle nose 1600 mm Clamiping area 1800 x 1000 Weight 3,7 Ton

; ready for use

CNC,5 axis JOBS,Linx Compact + Heidenhain TNC 530 HSCI Year of construction: 2013 X-2000 Speed up to 60m/min, Force (N) 9000 Acceleration 4.5 m/sec2 Y-3000 Speed up to 60m/min, Force (N) 9000 Acceleration 6.0 m/sec2 Z-1250 Speed up to 60m/min, Force (N) 9000 Acceleration 7.2 m/sec2 C - +/- 200 Straight , Torque 1200Nm ,Max torque with clamped axle 5000 Nm A - -120/+95 Torque 1200Nm, Max torque with clamped axle 5000NM Speed: 15,000 rpm Cone according to HSK-A-100 Weight : 70000 Kg Tool magazine type chain 32 tool positions, Max tool weight 15kg for more info, please call or write an e-mail. Machine is immediately available and in case of serious interest can be visited under power An invoice with VAT will be issued

Alzmetall AB4SJ Tool holder MK4 automatic feed with 3 feed speeds 2 shoot stages and infinitely variable speed control right left barrel, thread cutting device Cooling agent device in the foot Round table with holes without rev counter Machine hood modern made of plastic with cracks and loechers Speed: 80-710 rpm Table diameter: 450 mm Max distance from spindle to foot: 1200 mm Extension to center spindle: 170 mm Machine hoe approx. 200 cm Bt323s8 SPECIAL PRICE due to visually poor condition according to photos, technically usable condition, the drill is not locked at the shaft drill spindle tool holder in the rotational motion (see photos). If the drill is not firmly in the drill spindle, it rotates through. Special price

Fine drilling head for lid fraes machine, probably FP2, SK40, little used condition. Special price

Drilling capacity: 0 mm Throat: 0 mm Spindle taper: 0   CNC Brand: 0 CNC Model: 0 Technical data Table length: 700 mm Table width: 370 mm Drill capacity in steel: 22 mm Drill capacity in cast-iron: 24 mm Depth of throat: 300 mm Drill depth (spindle stroke): 120 mm Spindle head adjustment: 300 mm Table travels: Longitudinal travel (X-axis): 330 mm Transversal travel (y-axis): 210 mm Vertical travel (z axis): 350 mm Spindle speeds: stepless from: 250 rpm up to: 2000 rpm Feeds: Voltage 50 Hz 3x: 380 Volt Spindle motor: 2 HP Machine´s weight about: 990 kg Overall dimensions machine: Length: 1200 mm Width: 1000 mm Height: 1900 mm Various accessories: Coolant system Lamp

Drilling capacity: 0 mm Throat: 0 mm Spindle taper: 0   CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN TNC 415 B Technical data Drill capacity in steel: 25 mm Threat cutting in steel M: 16 Milling capacity: 100 cm3/min Taper in spindle: SF32 Spindle speeds: from: 50 rpm up to: 10000 rpm Table length: 885 mm Table width: 320 mm Distance of the T-slots: 50 mm T-channel width: 12 mm Number of T-channels: 5 Table load max.: 250 kg Height of table above floor: 1040 mm Min. distance from table to spindle: 0 mm Max. distance from table to spindle: 620 mm Longitudinal travel: 500 mm Transversal travel: 250 mm Vertical travel: 145 mm Feeds: X axis: 1 - 11000 mm/min Y axis: 1 - 11000 mm/min Z axis: 1 - 6000 mm/min W axis: 1 - 3600 mm/min Rapid traverse X: 11 m/min Rapid traverse Y: 11 m/min Rapid traverse Z: 6 m/min Voltage 50 Hz 3x: 400 Volt Power: 7 kW Total power required: 16 kW Machine´ ...

Drilling capacity: 0 mm Throat: 0 mm Spindle taper: 0   CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN Technical data Number of axis total: 5 Spindle nose:: SF 32 Drill capacity in steel: 30 mm Milling capacity: 100 cm3/min Spindle stroke: 180 mm Spindle speeds: from: 50 rpm up to: 9200 rpm Table length: 1230 mm Table width: 410 mm Min. distance from table to spindle: 0 mm Max. distance from table to spindle: 620 mm Longitudinal travel: 700 mm Transversal travel: 315 mm Vertical travel: 495 mm Feeds: 1 - 900 mm/min Rapid traverse:: 4 m/min Voltage 50 Hz 3x: 380 Volt Power: 16 kW Machine´s weight about: 3200 kg Overall dimensions machine: Length: 2500 mm Width: 2500 mm Height: 2450 mm Various accessories: Dividing attachment 4th axis: AT 100 CNC AC-L Coolant system Lamp

Drilling capacity: 0 mm Throat: 0 mm Spindle taper: 0   CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN TNC 407/415 Operating hours: 39000 Technical data Spindle nose:: SF 32 Drill capacity in steel: 30 mm Threat cutting in steel M: 24 Milling capacity: 100 cm3/min Spindle stroke: 180 mm Spindle speeds: from: 50 rpm up to: 9200 rpm Table length: 1230 mm Table width: 410 mm Min. distance from table to spindle: 0 mm Max. distance from table to spindle: 620 mm Longitudinal travel: 700 mm Transversal travel: 315 mm Vertical travel: 495 mm Feeds: 1 - 900 mm/min Rapid traverse:: 4 m/min Voltage 50 Hz 3x: 380 Volt Power: 16 kW Machine´s weight about: 3200 kg Overall dimensions machine: Length: 2500 mm Width: 2500 mm Height: 2450 mm Various accessories: Dividing attachment 4th axis with teilstock 3-jaw chuck diameter: 160 mm Collet device Set of toolholders Handwheel electroinic Touch Prob ...

Standard equipment: Drive: V-belt and gear unit combination Automatically elektomagnetischer spindle feed machined base plate with T-slots and coolant system integrated precise mechanical drilling depth setting automatic tool ejector Lighting Motor protection switch with tripping for U Emergency off pushbutton Drill protection with Electr. Hedging Rotary and swivel table Thread cutting device Gear lubrication through automatic oil pump Push button feed at the handle Stepless speed adjustment, frequency-controlled potentiometer and 3-way manual transmission for stage change Technical data: Drilling capacity 50 mm Thread cutting capacity (depending on elevation) M42 Spindle MK IV Depth 200 mm Throat depth 360 mm Column diameter 175 mm Usable surface (pivoting) 550 x 550 mm T - slot size number 3, distance 160 mm Dimension width 16/28 Digital speed display Dri ...

Drilling capacity: 0 mm Throat: 0 mm Spindle taper: 0   CNC Brand: 0 CNC Model: 0 Technical data Table length: 700 mm Table width: 370 mm Drill capacity in steel: 22 mm Drill capacity in cast-iron: 24 mm Depth of throat: 300 mm Drill depth (spindle stroke): 120 mm Spindle head adjustment: 300 mm Table travels: Longitudinal travel (X-axis): 330 mm Transversal travel (y-axis): 210 mm Vertical travel (z axis): 350 mm Spindle speeds: stepless from: 250 rpm up to: 4000 rpm Feeds: Voltage 50 Hz 3x: 380 Volt Spindle motor: 2 HP Machine´s weight about: 990 kg Overall dimensions machine: Length: 1100 mm Width: 600 mm Height: 2100 mm Various accessories: Quick change device Motorized table adjustment

Drilling capacity: 0 mm Throat: 0 mm Spindle taper: 0   CNC Brand: 0 CNC Model: 0 Technical data Table length: 700 mm Table width: 370 mm Clamping surface: Length: 580 mm Width: 280 mm Drill capacity in steel: 22 mm Drill capacity in cast-iron: 24 mm Taper in spindle: MT: 3 Depth of throat: 300 mm Drill depth (spindle stroke): 120 mm Spindle head adjustment: 300 mm Table travels: Longitudinal travel (X-axis): 330 mm Transversal travel (y-axis): 210 mm Vertical travel (z axis): 350 mm Spindle speeds: stepless from: 40 rpm up to: 3600 rpm Feeds: stepless from: 0.02 mm/r up to: 0.25 mm/r Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.0 / 1.5 HP Machine´s weight about: 990 kg Overall dimensions machine: Length: 1100 mm Width: 600 mm Height: 2100 mm Various accessories: Threading device Preparation for coolant device Lamp Quick change device Adjustable depth stop Digital readout number o ...

Drilling capacity: 0 mm Throat: 0 mm Spindle taper: 0   CNC Brand: 0 CNC Model: 0 Technical data Table length: 700 mm Table width: 370 mm Clamping surface: Length: 580 mm Width: 280 mm Drill capacity in steel: 22 mm Drill capacity in cast-iron: 24 mm Depth of throat: 300 mm Drill depth (spindle stroke): 120 mm Spindle head adjustment: 300 mm Table travels: Longitudinal travel (X-axis): 330 mm Transversal travel (y-axis): 210 mm Vertical travel (z axis): 350 mm Spindle speeds: stepless from: 275 rpm up to: 3600 rpm Voltage 50 Hz 3x: 380 Volt Spindle motor: 2 HP Machine´s weight about: 990 kg Overall dimensions machine: Length: 1100 mm Width: 600 mm Height: 2100 mm Various accessories: Preparation for coolant device Lamp Quick change device Digital readout number of axis:: 2 Motorized table adjustment

Drilling capacity: 0 mm Throat: 0 mm Spindle taper: 0   CNC Brand: 0 CNC Model: 0 Technical data Table length: 700 mm Table width: 370 mm Clamping surface: Length: 580 mm Width: 280 mm Drill capacity in steel: 22 mm Drill capacity in cast-iron: 24 mm Taper in spindle: MT: 3 Depth of throat: 300 mm Drill depth (spindle stroke): 120 mm Spindle head adjustment: 300 mm Table travels: Longitudinal travel (X-axis): 330 mm Transversal travel (y-axis): 210 mm Vertical travel (z axis): 350 mm Spindle speeds: stepless from: 40 rpm up to: 3600 rpm Feeds: stepless from: 0.02 mm/r up to: 0.25 mm/r Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.0 / 1.5 HP Machine´s weight about: 990 kg Overall dimensions machine: Length: 900 mm Width: 1000 mm Height: 1800 mm Various accessories: Threading device Preparation for coolant device Lamp Quick change device Adjustable depth stop Digital readout number o ...

Drilling capacity: 0 mm Throat: 0 mm Spindle taper: 0   CNC Brand: 0 CNC Model: 0 Technical data Table length: 700 mm Table width: 370 mm Clamping surface: Length: 580 mm Width: 280 mm Drill capacity in steel: 22 mm Drill capacity in cast-iron: 24 mm Taper in spindle: MT: 3 Depth of throat: 300 mm Drill depth (spindle stroke): 120 mm Spindle head adjustment: 300 mm Table travels: Longitudinal travel (X-axis): 330 mm Transversal travel (y-axis): 210 mm Vertical travel (z axis): 350 mm Spindle speeds: stepless from: 40 rpm up to: 3600 rpm Feeds: stepless from: 0.02 mm/r up to: 0.25 mm/r Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.0 / 1.5 HP Machine´s weight about: 990 kg Overall dimensions machine: Length: 900 mm Width: 1000 mm Height: 1800 mm Various accessories: Threading device Preparation for coolant device Lamp Quick change device Adjustable depth stop Digital readout number o ...

Drilling capacity: 0 mm Throat: 0 mm Spindle taper: 0   CNC Brand: 0 CNC Model: 0 Technical data Table length: 700 mm Table width: 370 mm Clamping surface: Length: 580 mm Width: 280 mm Drill capacity in steel: 22 mm Drill capacity in cast-iron: 24 mm Taper in spindle: MT: 3 Depth of throat: 300 mm Drill depth (spindle stroke): 120 mm Spindle head adjustment: 300 mm Table travels: Longitudinal travel (X-axis): 330 mm Transversal travel (y-axis): 210 mm Vertical travel (z axis): 350 mm Spindle speeds: stepless from: 40 rpm up to: 3600 rpm Feeds: stepless from: 0.02 mm/r up to: 0.25 mm/r Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.0 /1.5 HP Machine´s weight about: 990 kg Overall dimensions machine: Length: 900 mm Width: 1000 mm Height: 1800 mm Various accessories: Threading device Preparation for coolant device Lamp Quick change device Adjustable depth stop Digital readout number of ...

Drilling capacity: 0 mm Throat: 0 mm Spindle taper: 0   CNC Brand: 0 CNC Model: 0 Technical data Table length: 700 mm Table width: 370 mm Clamping surface: Length: 580 mm Width: 280 mm Drill capacity in steel: 22 mm Drill capacity in cast-iron: 24 mm Taper in spindle: MT: 3 Depth of throat: 300 mm Drill depth (spindle stroke): 120 mm Spindle head adjustment: 300 mm Table travels: Longitudinal travel (X-axis): 330 mm Transversal travel (y-axis): 210 mm Vertical travel (z axis): 350 mm Spindle speeds: stepless from: 40 rpm up to: 3600 rpm Feeds: stepless from: 0.02 mm/r up to: 0.25 mm/r Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.0 / 1.5 HP Machine´s weight about: 990 kg Overall dimensions machine: Length: 900 mm Width: 1000 mm Height: 1800 mm Various accessories: Threading device Preparation for coolant device Lamp Quick change device Adjustable depth stop Digital readout number o ...

Drilling capacity: 0 mm Throat: 0 mm Spindle taper: 0   CNC Brand: 0 CNC Model: 0 Technical data Table length: 700 mm Table width: 370 mm Clamping surface: Length: 580 mm Width: 280 mm Drill capacity in steel: 22 mm Drill capacity in cast-iron: 24 mm Taper in spindle: MT: 3 Depth of throat: 300 mm Drill depth (spindle stroke): 120 mm Spindle head adjustment: 300 mm Table travels: Longitudinal travel (X-axis): 330 mm Transversal travel (y-axis): 210 mm Vertical travel (z axis): 350 mm Spindle speeds: stepless from: 40 rpm up to: 3600 rpm Feeds: Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.0 / 1.5 HP Machine´s weight about: 990 kg Overall dimensions machine: Length: 900 mm Width: 1000 mm Height: 1800 mm Various accessories: Preparation for coolant device Lamp Quick change device: A-30 Adjustable depth stop Digital readout number of axis:: 2 Motorized table adjustment

CNC double-staender coordinate drilling rig with deep drilling support Kolb KBN G 120 year 1984 / Converted to Heidenhain TNC 426 in 2006 table size 4250 x 2200 mm Table load 14 t Table laengsweg X 3000 mm Main Spindle crosspath Y 2180 mm deep drilling spindle crossing path A - 2000 mm spindle vertical path 500 mm Distance between the stems 2640 mm; spindle - table 100 - 1300 mm; spindle diameter 224 mm Spindle drive power 46 kW spindle speeds 14 - 1400 rpm spindle holder ISO 50 Drilling in steel ST60: 100 mm diameter; drill up to 300 mm; threaded cutting up to M 125 x 3; frard power 730 cm3r/min.; SECOND SUPPORT SUPPORT: spindle speeds at BTA and ELB drilling 315 - 3150 rpm high high pressure oil Offer number V(B)-5234; Very good

Drilling capacity: 0 mm Throat: 0 mm Spindle taper: 0   CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN TNC 151 Technical data Number of axis total: 3 Spindle nose:: SF 32 Drill capacity in steel: 0.4 - 20 mm Drill capacity in cast-iron: 24 mm Threat cutting in steel M: 1 - 16 Thread cutting in cast-iron M: 18 Milling capacity: 20 cm3/min Spindle stroke: 120 mm Spindle speeds :stepless from: 25 rpm up to: 8000 rpm Table length: 730 mm Table width: 280 mm Distance of the T-slots: 50 mm T-channel width: 10H8 mm Number of T-channels: 4 Height of table above floor: 1160 mm Min. distance from table to spindle: 0-110-560 mm Max. distance from table to spindle: 560 mm Longitudinal travel: 420 mm Transversal travel: 230 mm Vertical travel: 450 mm Feeds: 1 - 8000 mm/min Rapid traverse:: 8 m/min Table load max.: 75 kg Voltage 50 Hz 3x: 380 Volt Power: 5.8 kW Total power required: 15 kVA Machi ...

see side sheet below, with 2-spindle drill head Franz X. LINDNER SBS-2/2, spindle distance 300 mm, (translation 1:1)

Drilling capacity: 0 mm Throat: 0 mm Spindle taper: 0   CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN TNC 355 Technical data Number of axis total: 4 Spindle nose:: SF 32 Drill capacity in steel: 0.4 - 20 mm Drill capacity in cast-iron: 24 mm Threat cutting in steel M: 1 - 16 Thread cutting in cast-iron M: 18 Milling capacity: 20 cm3/min Spindle stroke: 120 mm Spindle speeds :stepless from: 50 rpm up to: 9000 rpm Table length: 730 mm Table width: 280 mm Distance of the T-slots: 50 mm T-channel width: 12H8 mm Height of table above floor: 1080 mm Min. distance from table to spindle: 0-110-560 mm Longitudinal travel: 420 mm Transversal travel: 240 mm Vertical travel: 450 mm Feeds: 1-7200 mm/min Rapid traverse:: 7.2 m/min Table load max.: 75 kg Voltage 50 Hz 3x: 380 Volt Spindle power: 5 kW Total power required: 10 kW Machine´s weight about: 1300 kg Overall dimensions machine: Length: ...

form9 DP-18-VARIO Bench drilling machine Lxwxh 540 x 390 x 950 mm Table size 240 x 240 mm Table adjustment 45 ° - 0-45 ° Speed 440 â 2580 min-1 Quick clamping drill Chuck, Chuck clamping range / type 1-16 mm Distance from Chuck to table maximum 325 mm Distance from the drill Chuck to the frame base of 495 mm Motor 230-240 V Motor power 550 W Dimensions L x W x H 540 x 390 x 950 mm Weight net / gross 38.5 / 41 kg G & SC-5906807901

Number of vertical independent spindles: 9 Number of horizontal spindles on axis X : (2+2) Number of horizontal spindle on axis Y: (1+1) N° 1 saw blade unit: (ø 100 mm) Router head 3,6 Kw ISO 30 - 12000/24000 rpm Max. thickness of the panel: 50 mm Control: Full Parametric Max weight of the panel: Kg 25 Max panel size: X ,Y 1100, Z 50 mm Min panel size: X 270,Y 150 (70 op.), Z 12mm Number of controlled axes: 3 Panel feeding speed: 25m/min Spindles speed rotation: 3600 rpm Saw blade speed rotation: 7000 rpm Air pressure: 7 bar Diameter of the dust extraction: ø 140 mm Exhaust air consuntion: (2000 mc/ora) - (30 m/s) Max drilling depth in horiz. on X and Y axis: 30 mm Max drilling depth in vertical: 45 mm Max horizontal diameter of the tools: 12 mm Max vertical diameter of the tools: 35 mm Motor power: 1,5 kw Max air consumption: 60 Nlt./min. Total power : 6,4 Kw  ...

Control: HEIDENHAIN TNC 125 Technical data Drill capacity in steel: 23 mm Threat cutting in steel M: 18 Spindle speeds :stepless from: 45 rpm up to: 4000 rpm Spindle stroke: 120 mm Table length: 590 mm Table width: 320 mm Min. distance from table to spindle: 110 mm Max. distance from table to spindle: 570 mm Longitudinal travel: 500 mm Transversal travel: 300 mm Feeds: 0.02-0.6 mm/min Voltage 50 Hz 3x: 380 Volt Power: 5.0 kW Machine´s weight about: 1550 kg Overall dimensions machine: Length: 1700 mm Width: 1400 mm Height: 2100 mm Various accessories: Coolant system Quick change device Tool holder deposit Turret stopping device

with automatic working cycle, max. working width / stroke length of the oscillation 120 mm, drilling depth max. 80 mm, table inclination max. 20, tool clamping diameter max. 13 mm, drilling diameter max. 20 mm, spindle motor power 2.24 KW / volt. 380/50 Hz, spindle speed 9,000 rpm, oscillating motor power 0.75 KW, oscillation adjustable from 120 - 240 huebe per minute, pneumatic factory tension, 4 suction nozzles D=80 mm, space requirement - depth 1,000 mm, width 1,300 mm, height 1250 mm, weight 500 KG; Technically and visually in very good condition

Table drilling machine Ixion without base from a training workshop Type BT15STP stepless speed control via PIV gearbox Hoehen adjustment via rack, Speeds from 200rpm to 3,600rpm Flott Alzmetall Maxion Gillardon Special price

Drilling and threaded spindles, with FIBRO round board approx. 800 mm, See pictures

Technical data Number of drill spindles: 3 Max. drill depth: 400 mm Drill capacity in steel: from diameter: 2 mm up to diameter: 10 mm Bore capacity in steel: up to diameter: 18 mm Bore capacity in cast-iron: up to diameter: 20 mm Centre height: 180 mm Spindle stroke: 700 mm Max. clamping length: 700 mm Table length: 1280 mm Table width: 420 mm Spindle speeds: number (steps): 3 from: 700 rpm up to: 6400 rpm Drill spindle feeds: from: 15 mm/min up to: 500 mm/min Rapid traverse:: 3 mm/min Voltage 50 Hz 3x: 420 Volt Power: 4 kW Machine´s weight about: 2500 kg Overall dimensions machine: Length: 3450 mm Width: 900 mm Height: 1500 mm Various accessories: Coolant system

with NC round table WALTER 1000 mm, see pictures

Control: HEIDENHAIN TNC 360 Operating hours: 14112 Technical data Spindle nose:: SF 32 Drill capacity in steel: 30 mm Threat cutting in steel M: 20 Spindle stroke: 210 mm Taper in spindle: Fehlmann SF 32 Spindle speeds :stepless from: 50 rpm up to: 7100 rpm Table length: 1570 mm Table width: 500 mm Min. distance from table to spindle: 0 mm Max. distance from table to spindle: 720 mm Longitudinal travel: 850 mm Transversal travel: 435 mm Vertical travel: 590 mm Feeds: X,Y 1 - 8000 mm/min Table load max.: 250 kg Voltage 50 Hz 3x: 380 Volt Power: 5 kW Machine´s weight about: 3000 kg Overall dimensions machine: Length: 3100 mm Width: 2200 mm Height: 2500 mm Various accessories: Dividing attachment 4th axis Coolant system Quick change device Tool holder deposit Lamp Set of toolholders Handwheel electroinic

Technical data Table length: 760 mm Table width: 400 mm Clamping surface: Length: 600 mm Width: 320 mm T-channel width: 12H8 mm Height of table above floor: 810 mm Drill capacity in steel: 23 mm Threat cutting in steel M: 18 Drill depth (spindle stroke): 120 mm Max. distance from table to spindle nose: 110 - 570 mm Longitudinal travel (X-axis): 500 mm Transversal travel (y-axis): 300 mm Vertical travel (z axis): 460 mm Spindle speeds: stepless from: 45 rpm up to: 4000 rpm Vertical feeds: from: 0 mm/min up to: 800 mm/min Quill feed speed: number (steps): 6 from: 0.04 mm/r up to: 0.6 mm/r Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 2050 kg Overall dimensions machine: Length: 1700 mm Width: 1400 mm Height: 2100 mm Various accessories: Threading device Lamp Quick change device Set of clamping tools Digital readout number of axis:: 2 Manufacturer: ACU RITE Spindle brake Turret s ...

Drilling capacity: 13 mm Throat: 180 mm Spindle taper: 2   MACH - ID 6106 Make:MAXION IXION Type:BT 13 P YOP:2003 Max. drill Ø stee    l13 mm Max. drill Ø cast     15 mm Stroke pinole           70 mm Throat        180 mm Column sleeve        65 mm Spindle TaperMk    2 ISO/Bt/Mk Speeds / ranges        240 - 4000 Rpm Table Length            230 mm Table Width              170 mm Power                        0,75 kW Max. distance spindle – table        275 mm Dimensions Length    400 mm Width      500 mm Height  &nb ...

Drilling capacity: 15 mm Throat: 180 mm Spindle taper: 2   MACH - ID 6105 Make:MAXION IXION Type:Unimax 1 Frequenz YOP:2014 Max. drill Ø steel    15 mm Max. drill Ø cast     18 mm Max. tap ØM           12 M Stroke pinole           80 mm Throat        180 mm Column sleeve       65 mm Spindle Taper         2 ISO/Bt/Mk Speeds / ranges       4000 Rpm Table Length           250 mm Table Width             220 mm Power                       1.1 kW Max. distance spindle – table        380 mm Length&nbs ...

Height of bed rail until mid-drilling: 315 mm Gr. On drill bit Ã?: 178,3 mm Bed length: 9400 mm Drilling depth approx.: 3150 mm Continuous feed range: 70-1750 mm / min Rapid traverse speed: 4.25 m / min Spindle box, bore: 62 mm Main spindle RPM: 180-1000 rpm Main spindle drive: 380 V, 15 kW Machine weight: 6.6 t

Drilling capacity: 32 mm Radius: 1000 mm Spindle taper: 24   MACH-id    5451 MAKE         MAS Kovosvit TYPE           VO 32 YOP             1992 SPECIFICATIONS Arm Length        1000 mm Max. drill Ø cast         40 mm Max. tap Ø        24 M Stroke pinole          250 mm Max. distance spindle - table         270 mm Min. distance spindle - table         1040 mm Floor / table area          1150 x 800 mm Speeds / ranges            4500 Rpm Spindle Taper           4 ISO/Bt/Mk Column sleeve          300 mm Power&nbs ...

Drilling capacity: 32 mm Throat: 0 mm Spindle taper: 150   MACH-id    5460 MAKE        Alzmetal TYPE          Alzrapid 32 YOP             1998 SPECIFICATIONS Max. drill Ø steel      32 mm Max. drill Ø cast       40 mm Max. tap Ø      24 M Arm Length    725 mm Stroke pinole        150 mm Throat       400 mm Spindle Taper      4 ISO/Bt/Mk Speeds / ranges        3000 Rpm Table Length        1175 mm Table Width          525 mm Power       3 kW DIMENSIONS Length        2600 mm Width         2000 mm Height    &n ...

Blue Max mini Hardware drilling machine Spindle number 6 Table-top model Engine 0,8 KW 400V 50 Hz Masch. No. 04416 Pneumatic drill feed Fence without stand (optional) Year of build 2016 G & 2574-M3I2J

Hettich YYB-800 Hardware drilling machine BLUEMAX YYB-800 type Spindle number 6 (2-3-1) Table-top model 1 KW 230V Masch. No. 09411 Manual drill feed Without stand (optional) Year 2011 G & 2569-M3F6Nl

2 squid drilling spindles ROTAX, for conversions etc.

Towing radial, Mk 4, universally adjustable

Hettich-blue-mini-MAX Hardware drilling machine Type Blue-Max-mini Spindle number 4 Table-top model Motor 0.75 KW 400V 50 Hz Masch. No. 01395 Manual drill feed without stand (optional) Built in 1995 G & 2827-M3I2J

Drilling capacity: 40 mm Radius: 1200 mm Spindle taper: 280   MACH-id    5351 MAKE         Giovanni Breda TYPE           R 40 - 1200 YOP             1990 SPECIFICATIONS Arm Length        1200 mm Max. drill Ø stee      l40 mm Max. drill Ø cast       50 mm Max. tap Ø          M 45 M Stroke pinole         280 mm Max. distance spindle - table         450 mm Min. distance spindle - table      1330 mm Floor / table area           1960 x 840 mm Speeds / ranges         1800 Rpm Spindle Taper ISO/Bt/Mk          4  ISO/Bt/Mk Column sleeve ...

Drilling capacity: 50 mm Radius: 1600 mm Spindle taper: 300   MACH-id    5343 MAKE        Reform Germany TYPE          RB 16/50 YOP            2013 SPECIFICATIONS Arm Length         1600 mm Max. drill Ø steel     50 mm Max. drill Ø cast         60 mm Max. tap Ø        M 60 M Stroke pinole      300 mm Floor / table area        1750 x 980 mm Speeds / ranges        2000 Rpm Spindle Taper ISO/Bt/MkMk        5 ISO/Bt/Mk Column sleeve           280 mm Quill Ø    70 mm Power    6.5 kW DIMENSIONS Length       2400 mm Width      & ...

Saling drill BLUTHARDT in robust performance, drilling capacity 50 mm, holder Mk 4

Drilling capacity: 100 mm Radius: 2200 mm Spindle taper: 110   MACH-id     5304 MAKE          SAS Torino TYPE            TM 1900 YOP               1981 SPECIFICATIONS Max. drill Ø steel    100 mm Max. drill Ø cast      100 mm Stroke pinole            550 mm Throat       2400 mm Column sleeve      500 mm Quill Ø       110 mm Spindle Taper ISO/Bt/Mk         6 ISO/Bt/Mk Speeds / ranges        1275 Rpm Table Length          2215 mm Table Width            1180 mm Power        11 kW Max. distance spindle - table  &nbs ...

Line boring machine Ayen with 32 mm grid Bahvy3bjt2 with attacks Pneum.. Holders Motor 0.55 kW L x W x H: 250 x 80 x 200 cm Weight 420 kg Year of construction 1983 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Drilling capacity: 40 mm Radius: 1000 mm Spindle taper: 60   MACH-id     5301 MAKE          MAS Kovosvit TYPE            VO 32 YOP              1993 SPECIFICATIONS Max. drill Ø steel        32 mm Max. drill Ø cast         40 mm Max. tap  Ø     20 M Arm Length        1000 mm Stroke pinole        250 mm Column sleeve        220 mm Quill Ø    60 mm Spindle Taper ISO/Bt/Mk       4 ISO/Bt/Mk Speeds / ranges       4500 Rpm Table Length           1150 mm Table Width             800 mm Power         ...