drilling machine used for sale

Counting and banding machine ATS US 2000 FSB-DBN-T; State as is; should be installed by ATS Customer Service; suitable for processing banknotes; Rontech MF-360 RAV counting feeder; 1x Banderolier ATS US 2000 AD bandwidth 40mm and frame 260x260mm; 1x Banderolier ATS US 2000 AD Bandwidth 30mmund Frame 260x120mm; Turning unit installed. Count and banding machine ATS US 2000 FSB-DBN-T; condition as is; should be installed by the support of ATS; used for banknotes; count feeder Rontech MF-360 RAV; 1x banding machine ATS US 2000 AD with band width 40mm and frame 260x260mm; 1x banding machine ATS US 2000 AD with band width 30mm and frame 260x120mm; turning station.

sheet width: 1290 mm plate thickness: 5 mm pre-bending: ja roll diameter: 120 mm roll speed: 1 - 6 m/min total power requirement: 1,1 kW weight of the machine ca.: 825 kg Asymmetry roll arrangement, pre-bending ist possible. This new machine is in the following sizes obtainable: working length from 1040 until 2540 mm, max. plate thickness ( 400 N/mm² ) from 1 until 6,5 mm. We are distributor only for Germany. Machine dealer with own stock of 2500 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 4700 mm y-travel: 1000 mm z-travel: 1000 mm control: HEIDENHAIN TNC355 table-size: 5000x1000 mm T-slots: 7x mm turning speed range: 2800 U/min feed: 6-5000 mm/min rapid traverse: 15000 mm/min spindle motor: 30,00 kW spindle taper: SK 50 Table load: 10.000 kg Main drive: 40 PS weight of the machine ca.: 27,00 t dimensions of the machine ca.: m With HEIDENHAIN TNC 355 control. Machine can be inspected under power. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -1x motor: 0.7 kW 11400 rpm at 200 Hz -Voltage: 220 V -Hole: Ø 20 mm -Weight: 5 kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -1x motor: 0.3 kW 18000 rpm at 300 Hz -Voltage: 165 V -Hole diameter: 16 mm -Number: 12 motors available Price: per piece -Weight: 3 kg/piece

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Motor: 0.40 kW 12000 rpm at 200 Hz -Motor: 0.55 kW 18000 rpm at 300 Hz -Receptacle: Collet -Weight: 4 kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -1x motor: 0.3 kW 17300 rpm at 300 Hz -Voltage: 165 V -Hole diameter: 20 mm -Weight: 4 kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -1x motor: 0.3 kW 18000 rpm at 300 Hz -Voltage: 200 V -Hole diameter: 16 mm -Weight: 5 kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Motor: 1.5 kW 2820 rpm at 50 Hz -Motor: 2.2 kW 5800 rpm at 100 Hz -Voltage: 380 V -Shaft mounting: Ø 30 mm -Weight: 15 kg

Machine vice, sturdy vice, drill press vice -Jaw width: 230 mm -Jaw height: 73 mm -Clamping depth: max. 300 mm -swivel -Weight: 70 kg

Machine vice, sturdy vice, drill press vice -Jaw width: 200 mm -Jaw height: 63 mm -Clamping depth: max 165 mm -Weight: 35 kg

Machine vice, sturdy vice, drill press vice -Jaw width: 200 mm -Clamping depth: max. 280 mm -Dimensions: 600/250/H140 mm -Weight: 50 kg

Machine vice, sturdy vice, drill press vice -Jaw width: 160 mm -Clamping depth: max. 100 mm -Dimensions: 460/170/H120 mm -Weight: 40 kg

Machine vice, sturdy vice, drill press vice -Vise: rotatable -Jaw width: 160 mm -Clamping depth: max. 110 mm -Dimensions: 470/180/H155 mm -Weight: 35 kg

grinding diameter: 1520 mm grinding length: 6000 mm grinding wheel size: 660 mm steady: 800 mm steady: 800 mm total power requirement: 15/25 HP weight of the machine ca.: . t dimensions of the machine ca.: . m 2 Steadies Coolant System The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine vice, sturdy vice, drill press vice -Jaws can be moved depending on the workpiece geometry -Vise: rotatable -Jaw width: 255 mm -Clamping depth: max. 300 mm -Dimensions: 680/330/H180 mm -Weight: 95 kg

Machine vice, sturdy vice, drill press vice -Baking extra long baking tray -Jaw width: 400 mm -Clamping depth: max. 130 mm -Weight: 40 kg

Machine vice, sturdy vice, drill press vice -Jaw width: 150 mm -Clamping depth: max. 160 mm -Dimensions: 500/270/H170 mm -Weight: 40 kg

Machine vice, sturdy vice, drill press vice -Jaw width: 220 mm -Clamping depth: max. 140 mm -Weight: 60 kg

screw size: 98 mm injection shot weight in Polysterol: unbkt. g/PS closing pressure: 8600 kN total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

screw size: 62 mm injection shot weight in Polysterol: 903 g/PS closing pressure: 3300 kN total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: unbek. mm y-travel: unbek. mm z-travel: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

screw size: 84 mm injection shot weight in Polysterol: unbkt. g/PS closing pressure: 440 kN volumn: 1660 volt: V total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 0 mm gear width: 0 mm max. module: 40 min. module: 1 weight of the machine ca.: 0,05 t dimensions of the machine ca.: 0,5x0,3x0,3 m pitch and run-out tester unit for gear measuring machines. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

dimensions: 670 x 430 x 870 mm : 670 x 430 mm semi-autom. working: SEMI-AUTOMATIC band length preselection via POTI Band voltage manually via coupling The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine vice, sturdy vice, drill press vice -Jaw width: 200 mm -Clamping depth: max. 170 mm -Dimensions: 550/200/H165 mm -Weight: 50 kg

Machine vice, sturdy vice, drill press vice -Jaw width: 170 mm -Clamping depth: max. 120 mm -Dimensions: 480/170/H130 mm -Weight: 30 kg

x-travel: 1100 mm y-travel: 600 mm z-travel: 500 mm Control: Heidenhain TNC 335 B tool taper: SK40 table surface - upper: 1650 x 700 mm table face - lower: 1870 x 300 mm spindle speed:: 3000 Upm spindle motor: ca. 9 kW total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Horizontal and vertical milling Position change of the head is done manually Vertical head with drilling quill, drilling depth 100 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

current intensivity: 400 A open-circuit voltage: 65-75 V IP protection class: IP21 Permissible load at 35% duty cycle 400 A at 60% duty cycle 315 A at 100% duty cycle 250 A Idle power 0.49 kW Application class: S - Water cooled - With hand and foot remote control - Incl. Hose package approx. 6000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine vice, sturdy vice, drill press vice -Jaw width: 170 mm -Clamping depth: max. 110 mm -Dimensions: 600/200/H120 mm -Weight: 55 kg

Machine vice, sturdy vice, drill press vice -Jaw width: 180 mm -Clamping depth: max. 110 mm -Dimensions: 550/190/H180 mm -Weight: 50 kg

Machine vice, sturdy vice, drill press vice -Jaw width: 125 mm -Clamping depth: max. 35 mm -with prism -Dimensions: 300/125/H70 mm -Weight: 10 kg

drill diameter: 1,5 - 25 mm lip angle: 40 - 180 ° 6-jaw-chucks: various equipment: manual included: Encapsulated drive motor: closed version, air-cooled, rotary and AC drills with cylindrical or conical shank left and right-hand drills 6 Jaw chuck Device for compressed air cooling various equipment (see pictures) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine lamp, machine lamp, work area lamp -Lights: are not used -Dimensions: 545/185/H150 mm -Connection: 24 V DC 1x36W -Number: 14x lights available -Price: per piece -Weight: 8 kg/piece

Machine vice, sturdy vice, drill press vice -Jaw width: 125 mm -Clamping depth: max. 50 mm -exciting: pneumatic -Dimensions: 530/240/H150 mm -Weight: 56 kg

Machine vice, sturdy vice, drill press vice -Jaw width: 215 mm -Clamping depth: max. 130 mm -Dimensions: 550/220/H125 mm -Weight: 50 kg

Machine vice, sturdy vice, drill press vice -Jaw width: 190 mm -Clamping depth: max. 160 mm -Dimensions: 630/200/H160 mm -Weight: 55 kg

workpiece length: 610 mm work piece width: 180 mm workpiece height: 240 mm dia. of cup wheel: 200 mm table-size: Ø 280 mm spindle throat: 250 mm spindle speed:: 3000 U/min. voltage: 380 V total power requirement: 2,94 kW weight of the machine ca.: 430 kg dimensions of the machine ca.: 0,85 x 0,75 x 1,90 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

drill diameter: 3-40 mm drilling length: 500 mm lip angle: 15 - 75 ° total power requirement: 4,1 kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 1,80x1,60x1,40 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine vice, sturdy vice, drill press vice -Vise: rotatable -Jaw width: 175 mm -Clamping depth: max. 270 mm -Dimensions: 630/450/H175 mm -Weight: 55 kg

x-travel: 22.000 mm y-travel: 1.500 mm z-travel: 3.000 mm Control: SIEMENS 840 D milling head -swivable: 0,001/0,001 Grad milling head: Universalfräskopf 45° Internal cooling system: 20 bar Chip coveyor: ja Tools changer: 30 pos. coolant: 1.100 l Tool taper: DIN 69871A ISO 50 total power requirement: 45 kW weight of the machine ca.: 68 t The round table shown in the pictures as well as the plate field are not sold with ! urning Speeds 6.000 r.p.m. AutoIndex Head 45 º Head 360.000 Pos. Elbow 360.000 Pos. Main Motor Power 37 Kw. Nº Change Range 2 Ranges Automatic Tool Charger INCLUDED Tools at ATC 30 Coolant Through Tool 20 Bar INCLUDED Soluble Oil Tank with filter paper INCLUDED Head Coolant System + CF Box INCLUDED Longitudinal Chip Conveyor INCLUDED Operator?s Platformd with 2000 mm Vertical movement. INCLUDED Ready for Rotor Translating Table (Regulator + Wires) /IN ...

Machine vice, sturdy vice, drill press vice -Jaw width: 170 mm -Clamping depth: max. 240 mm -Dimensions: 650/350/H130 mm -Weight: 40 kg

Machine vice, sturdy vice, drill press vice -Jaw width: 160 mm -Clamping depth: max. 105 mm -Dimensions: 450/160/H125 mm -Weight: 38 kg

Machine vice, sturdy vice, drill press vice -Jaw width: 160 mm -Clamping depth: max. 105 mm -Dimensions: 450/160/H125 mm -Weight: 38 kg

Machine vice, sturdy vice, drill press vice -Vise: rotatable -Jaw width: 160 mm -Clamping depth: max. 105 mm -Dimensions: 460/310/H160 mm -Weight: 50 kg

Bread packaging machine Hartmann VS 310 Series: M86/ 211L Year of construction: 12/1993 Weight: 850kg

Double pump for Krauss Maffei machines Voith Rexroth control pumps 3-fold SY2DFE1-21/071-071 KM No. 6441936 MNR: R900751978

With matching spacer rings according to photos. Scope of delivery according to photo 1.

MIG/MAG welding machine, MIG/MAG welding machine -Max. welding current: 320 A -2-roller drive -Air-cooled -incl. ground cable -with removable wire feeder -Gas valve -Hose package -Dimensions: 1000/500/H970 mm -Weight: 170 kg

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Power: 1.85 kW at 17570 rpm at 300 Hz -Voltage: 165 V -Receptacle: Shaft collet -Number: 8 motors available -Price: per piece -Dimensions: 350/75/H160 mm -Weight: 12 kg