drilling machine used for sale

Technical data Drilling capacity approx. 100 mm Spindle mount Mt 6 Reach 3000 mm 21 spindle speeds 18-1800 rpm 18 feeds 0,0375 - 2 mm / Rev Column diameter 600 mm Weight approx. 15000 kg max. distance plate - spindle 2100 mm Prepared for container loading

) for double pot MAKO-DT/130 ) with two drills ) incl. automatic Mittelbohreinstellung ) Cycle time per frame is less than 15 seconds ) Clamping and centering device with pneumatic cylinders, which are vertically and horizontally ) this machine streamlines the beating of wood window

Control: HEIDENHAIN TNC 124 Traverse path x/Y/Z 500/ 250 / 160 mm Travel W 480 mm Size (L x W) 885 x 320 mm Maximum table load 250 kg Distance from table - spindle nose 0-605 mm Speed x/Y 1-2000 mm / min Feed speed Z 1-1200 mm / min Tool - quick change system SF 32 RPM infinitely 9200 RPM 5 kW Dimensions (W x D x H) 1850 x 2550 x 2400 mm

AUTOMATIC BORING MACHINE Type VITAP 212 n.02 boring heads ( n.21 mandrins each one ) horizontal and / or vertical boring pneumatic tilting lateral reference fences 45° deg. horizontal boring Technical Details : n.21 mandrins ( x2 ) centre distance between mandrins mm. 32 mandrins rotation speed rpm 2800 n.02 motors Hp 2 each one net weight kgs. 600 Volt. 380/50

Drilling capacity in steel / cast iron 50/65 mm Drilling capacity in steel 70 mm Feed 0.1 - 0.54 mm / Rev Speed 62-1240 RPM Recording MK 5 spindle stroke (drilling depth) 240 mm Usable projection 385 mm Table 800 x 680 mm Spindle head diameter 70 mm Height 2350 mm the machine

UWM BENCH DRILL TYPE 20 Professioneel -MK2 -180/2740 t/m -Table 320 x 300 mm -Table is draaibaar -Noodstop -Beschermkap -Verlichting -Documentatie -230V DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

Condition: Very good condition Available: Immediately

BORING MACHINE Type VITAP ALFA 21 n.21 mandrins motor power Hp 2,5 ( Kw 1,8) titltable head by pneumatic movement vertical or horizontal boring CE mark : YES volt. 380/50

Duration / ALB ear power 30/35 mm thread cutting capacity Max M24 (Steigungsabhängig) hand-reversing switch for forward link. Undervoltage, thermal overload protection, spindle MK 3 drilling depth 180 mm throat depth 260 mm column diameter of 110 mm-usable table surface [BxL] 420 x 340 mm speed display scale drilling depth indicator scale drill depth stop with fine adjustment Table height with rack and pinion motor three-phase of 400 V pole changing bar 1,5/2 kW spindle speed continuously 125-2000 1 / min including drilling package consisting: taper mandrel, Chuck, Vice and T - Groove set. Warranty: 3 years delivery: immediately, free delivery loaded: free House including packaging not the right machine? WE DO ALSO OTHER AFLOAT PRODUCTS - ASK FOR A QUOTE! FLOTT BASE PARTNER .

ear-deep and speed display - digital thread cutter M20 (gradient-dependent) variable speed 125-4000 U/Mon in two stages, stage change of belt apportionment. Drilling capacity 525/30 mm of thread cutting capacity (depending on elevation) M20 spindle MK 3 drilling depth 125 mm projection of 280 mm-usable table surface (pivoting) 420 x 340 mm Feed rate of hand table height with rack machines dimensions (W x D x H) 520 x 820 x 1900 mm motor three-phase 400 V pole changing bar 0.9 / 1.45 kW weight 275 kg

Thread cutting device Freischneiden Setup Drilling depth shut off programmable Drilling depth and speed display - digital Thread cutter M20 (depending on elevation) variable speed of 125-4000 U/mon in two stages, stage change of belt apportionment. Drilling capacity 25/30 mm Spindle MK 3 Drilling depth 125 mm Projection 280 mm Usable surface (pivoting) 420 x 340 mm Feed 0-300 mm / min stepless Table height with rack and pinion Machine dimensions (W x D x H) 520 x 820 x 1900 mm Motor three-phase 400 V pole changing bar 0.9 / 1.45 kW Weight 300 kg Including drilling package consisting: taper mandrel, Chuck, Vice and T - Groove set. Option: spindle stop and chip fracture module 690 EUR DELIVERY: free House including packaging NOT THE RIGHT MACHINE? WE DO ALSO OTHER AFLOAT PRODUCTS - ASK FOR A QUOTE! FLOTT BASE PARTNER .

Drilling depth and speed display - digital Thread cutting device M30 (depending on elevation) R1 spindle speed with continuous transmission speed series 100-2000 1 / min R2 spindle speed with continuous transmission speed range 70-1400 1/min Drilling capacity 35/40 mm Spindle MK 4 Drilling depth 160 mm Throat depth 300 mm Usable surface (pivoting) 590 x 450 mm Feed by hand Table height with rack and pinion Machine dimensions (W x D x H) 610 x 850 x 1920 mm Motor three-phase 400 V pole changing bar 1,5/3,0 kW Weight 420 kg Including drilling package consisting: taper mandrel, Chuck, Vice and T - Groove set. DELIVERY: free House including packaging NOT THE RIGHT MACHINE? WE DO ALSO OTHER AFLOAT PRODUCTS - ASK FOR A QUOTE! FLOTT BASE PARTNER .

Thread cutting device Freischneiden Setup Drilling depth shut off programmable Drilling depth and speed display - digital Thread cutting device M30 (depending on elevation) R1 spindle speed with continuous transmission speed series 100-2000 1 / min R2 spindle speed with continuous transmission speed range 70-1400 1/min Drilling capacity 35/40 mm Spindle MK 4 Drilling depth 160 mm Throat depth 300 mm Usable surface (pivoting) 590 x 450 mm Feed 0-300 mm / min stepless Table height with rack and pinion Machine dimensions (W x D x H) 610 x 850 x 1920 mm Motor three-phase 400 V pole changing bar 1,5/3,0 kW Weight 420 kg Including drilling package consisting: taper mandrel, Chuck, Vice and T - Groove set. Option: spindle stop and modulus of rupture of chip 660 EUR DELIVERY: free House including packaging NOT THE RIGHT MACHINE? WE DO ALSO OTHER AFLOAT PRODUCTS - ASK  ...

Duration / ALB ear power 35/40 mm Thread cutting capacity Max M30 (Steigungsabhängig) Hand-reversing switch for forward link. Undervoltage, thermal overload protection, Spindle MK 4 Drilling depth 160 mm Throat depth 300 mm 2johiqzz Column diameter 110 mm Usable surface [BxL] 420 x 340 mm Speed display scale Drilling depth indicator scale Drilling depth stop with fine adjustment Table height with rack and pinion Motor three-phase 400 V pole changing bar 1.5/3 kW Spindle speeds with continuously variable transmission 100-2000 1 / min Machine size (WxDxH) 610 x 850 x 1920 mm Weight 420 kg Including drilling package consisting: taper mandrel, Chuck, Vice and T - Groove set. Warranty: 3 years Shipping time: immediately, free loaded DELIVERY: free House including packaging NOT THE RIGHT MACHINE? WE DO ALSO OTHER AFLOAT PRODUCTS - ASK FOR A QUOTE! FLOTT BASE  ...

Technical data: -Drilling capacity approx. 30 mm - spindle mount MT 3 -Spindle speeds in 2 steps continuously variable 80-1400 RPM -Table surface 390 x 420 mm -Drill unit by hand crank height adjustment -min / max distance table / spindle 220 / 580 mm -Drilling spindle stroke 150 mm -Spindle projection powered 280 mm â 400 V / 1.3 / 2.3 kW -Space requirement approx. B 480 x H 880 - H 1200 X 1050 mm -Weight approx. 250 kg -Table base with storage space B 600 x h. 910 x H 800 mm -Weight 200 kg

right / left Number of spindles 4 Slide stroke 800 mm Drilling area in steel St-60 Full drilling dia. 15 mm Boring dia. 20 mm Drilling method Single-lip drill

Drilling capacity in steel St 60 40 mm Drilling capacity in cast 50 mm Threads in steel 32 mm Threads cast 42 mm Taper of spindle mount Mt 5 Projection 1.630 mm Quill stroke 310 mm Spindle speed range 40-1,800 RPM Feed areas 0.125 1.25 mm / Rev About 3,7 kW Machine weight 3.8 t Quick change system

BERNARDO SAEULENBOHRMASCHINE TYP B 430 Vario -MK3 -280/2600 t/m -Variomatic -Panel 345 x 345 mm -Tafel is draaibaar -Noodstop -Shearmkap -Documentatie -400V DUTCHMACH Metal processing machines ENSCHEDE-NIEDERLANDE (3 km from the German border)

Four head paperdriller Lawson-Dexter Model B3 Heavy Duty Drill Year 1985-1990´s Details 4 head paper driller Variable drilling speed Variable drilling spinning speed Operation Electric footswitch Available Direct

Description ID U69.2 Status Active Price 100 € + VAT Year of manufacture 1985 Location Oradea (RO) Horizontal wood boring machine with a single spindle, input: 380 V / 50 Hz. ExWorks. Price is negotiable. Contact Tel.: +40-359/175.575 Fax: +40-259/426.248 Mobil: +40-743/177.040 ; +40-740/221.698 Technical inspection can be organized at least 24 hrs before the due date We speak English. Wir sprechen Deutsch. (+40-740/221.698 ) Hablamos Español. Beszélünk magyarul. (+40-743/177.040 ) Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervam dreptul la greseli, modificari si vanzare prealabila.

TTMC SAEULENBOHRMASCHINE TYP T25 -MK3 -105/2900 t/m -2 toeren motor -Noodstop -Shearmkap -Documentatie -400V Beyhhatxyi DUTCHMACH Metal processing machines ENSCHEDE-NIEDERLANDE (3 km from the German border)

VR 4A/1250 Producer Mas Max. drilling diameter 50 mm Max. vertical arm adjustment 750 mm Taper in spindle 4 Morse Main motor output 4 kW Dimensions l x w x h 2250x1055x2970 mm Machine weight 2700 kg

MIKROMAT Model / type:BKoE 630x1000 Technical data: > Mikromat BKoE 630 x 1000 > table clamping surface 1000 x 630 mm > longitudinal travel of the table 710 mm > cross travel of the table 700 mm > travel of headstock 630 mm > spindle stroke 200 mm > distance between spindle nose and table 20-850 mm

BKOZ 900x1400 spindle taper MK IV sleeve stroke 250mm table size 900x1400mm longitudinal 1000mm cross 750mm vertical movement by the head of main spindle 600mm spindle speeds 28-1400 Upm spindle feeds 0,02-0,8mm/U scales wreaths for all directions of motion hydr. clamping system coolant system sep. control cabinet Motor: 230/380V 50HZ 8KW dimensions base: 3.300 x 2.400mm height: 2.500mm weight: 7.500 kg

Hole drill machine for wood Fabr. CASATI MACCHINE Type HF / SuperVertical boring head / boring bar with: 13 drillsDrilling direction: from aboveDrilling depth: 60 mmVertical stroke: 150 mmDrilling beam pivotable forwards by: 90 °Perimeter spacing center-center hole: 32 mmMotor Power Drilling Motor Vertical: 2 HPHorizontal drill head with: 3 drillsHorizontal stroke: 130 mmDrilling direction: from back to front, fixedHole pitch: 32 mmWorktable size: 2000 x 450 mmDrill table adjustment in y-direction: 70 mmMotor Power Drilling Motor Horizontal: 0.25 kWCompressed air: 6-8 barExternal dimensions: 2150 x 1380 x 1780 mmWeight approx: 160 kgWith:- pneumatic material tension (clamping stroke 26 mm)used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be ...

Fitting drill Ganner L x W x H: 1.20 x 0.80 x 1.40 m + stops Weight approx. 400 kg Built in 1987 The machine is in good condition, ready for operation. Changes, errors, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Continuous drilling capacity: 25 mm Normal drilling capacity: 30 mm Thread cutting power: M 16 Spindle: MK 3 Drilling depth: 135 mm Spindle speeds infinitely variable: 150 - 3000 rpm Table size: 460 x 360 mm Weight: 225 kg Mains connection: 400 volts, 50 Hz Facilities: - Thread cutting device - Digital display for speed as standard - Coolant device - LED machine light - Stepless speed adjustment - 24 V Electric - Base plate with T-slots - Drilling table adjustable via rack and worm gear and swivelled around column - Emergency-off-strike button - Motor full protection - Star handle - CE compliant

Drilling capacity max.: 30 mm Thread cutting: M 14 Tool rear ham: MK 3 Spindle speeds, infinitely variable: 150 - 2500 rpm Extension: 265 mm Drilling depth: 150 mm Pinole feed: 0.05 / 0.1 / 0.2 mm/U Column diameter: 92 mm Table size / T-slot size: 500 x 400 mm / 14 mm Engine power: 1.5 kW Machine dimensions (W x D x H): 640 x 850 x 1850 mm Weight approx.: 265 kg Characteristics: - Vario drive for infinitely variable adjustment of the desired speed - Pinole delivery either by hand or by mechanical feed - Set speed by means of digital display quickly and easily readable - Stable casting table with T-slots and coolant gutter - Adjustable drilling depth stop, drilling depth can be read by scale - Thread cutting device - CE / IEC, German documentation and German service Delivery: - Quick-clamp chuck 1 - 16 mm / B 18 - Drill chuck mandrel MK 3 / B 18 - Coolant dev ...

Drilling capacity max.: 35 mm Thread cutting: M 24 Tool rear ham: MK 4 Spindle speeds, infinitely variable: 65 - 2000 rpm Extension: 265 mm Drilling depth: 150 mm Pinole feed: 0.05 / 0.1 / 0.2 mm/U Column diameter: 115 mm Table size / T groove size: 685 x 485 mm / 14 mm Engine power: 1.5 kW Machine dimensions (W x D x H): 950 x 580 x 2000 mm Weight approx.: 385 kg Characteristics: - Vario drive for infinitely variable adjustment of the desired speed - Pinole delivery either by hand or by mechanical feed - Set speed by means of digital display quickly and easily readable - Stable casting table with T-slots and coolant gutter - Adjustable drilling depth stop, drilling depth can be read by scale - Thread cutting device - Gearbox pre-bed - CE / IEC, German Documentation and German Service Delivery: - Table clamping and height adjustment from the front - Quick-clam ...

Digital display Heidenhain Thread cutting device Automatic pinole feed Electr. adjustable head (height) Coolant pump Table size 600 x 250 mm Recording MK 3 Speed Continuous

Type: MZ73031A Number of spindles 3 Distance between first and last spindle 50 mm Adjustable drilling speed Height of the working table 820 mm Table dimensions 735×440 mm Number of clamps 2 Motor power 1,5 kW 400 V Motor r.p.m. 2800 r.p.m Working air pressure 6-8 bar Weight 75 kg Transporting dimensions 900x700x1500 mm

- Speedometer Digital - Depth indicator Digital Maximum drilling capacity 30/35 mm Max threaded drilling capacity M12/M20 Spindle stroke 130 mm Spindle cone Morse 4 Max distance between spindle and table 790 mm Distance between spindle axis and column 308 mm Spindle stick Vertical stroke of the spindle stick 130 mm Spindle speed 1-160-1000 rpm. 2-320-2000 rpm. Dimensions of the plate 350 x 440 mm Dimensions of the upper plate 570 mm Engine power 2.7/1.7 kW Weight 305 kg Dimensions 400x900x1900 mm

Continuous/normal drilling power (mm) R1 (gemes. Drehmom. Nm) 30/35 (in E3335/ST60) (135) R2 (gemes. Drehmom. Nm) 27/32 (in E335/ST60) (90) Thread cutting performance max. (slope-dependent) R1 M30x3.5 R2 M24x3 Spindle MK IV Drilling depth (mm) 160 Extension (mm) 300 Column diameter (mm) 140 Usable table area (W x D) (mm) 590 x 450 Speed display digital Drilling depth display digital Drilling depth stop with fine adjustment Table height adjustment with rack Spindle/table (mm) 150-700 Machine dimensions without VP (mm) 610 x 900 x 1,980 mm Machine dimensions with VP (mm) 670 x 1,100 x 2,200 mm Motor rotary current 400V with frequency inverter (kW) 4.0 Spindle speeds infinitely variable R1 (1-stage) 0-1000 rpm R2 (1-stage) 0-1600 rpm Feed by hand Weight (kg) 400 Optional (780 EUR) drilling package 5,beststretched from: Vice [felix] 125 Cone mandrel MK III/B ...

HBM SAEULENBOHRMASCHINE TYPE Z5040E - MK4 - Electromagnetic automatic voeding - 50/1450 t/m - Draait right-hand-leftom - Tapfunctie - Uitlading 180 mm - Table 560 x 560 mm - Tandwielaangedreven - Koeling - Beschermkap - Noodstop - Verlichting - 400V DUTCHMACH Metalworking machines ENSCHEDE - NETHERLANDS (3 km from the German border)

The Peddinghaus FDB 600 plate processor from the Peddimat product range is suitable for automated drilling and oxy-fuel flame cutting of flat steel and steel sheets in steel construction. CNC control SIEMENS SINUMERIC drill diameter: min ø 8, max. ø 40 mm, inner coolant drilling system Number of drilling agregates:3 pcs. Cutting system: Autogen burning equipment total power requirement: 30 kW max. workpiece height: 600 x 50 x 6000 mm Min. material size: 80 x 8 mm sheet thickness - min.:6 mm sheet thickness - max.:50 mm dimensions of the machine ca.:2,4 x 2,4 x 2,8 m Lead roller conveyor: 6 m Outside roller conveyor: 1 m weight of the machine ca.: 6,5 t

Woelfel B100/S used machine Spindle dia 125mm MK 6 Ram dia 165 mm with stroke 200 mm Spindle speed in 24 steps from 30 - 1200 rpm Vert. travel of headstock 1250 mm Bed clamping surface 870 x 700 mm Additional table 710 x 560mm height 500 mm Height between bed and spindle nose 1460 mm

Stacking height: 50 mm Speed: 18 sec. Made in Japan

Morse cone MK 3 Drilling performance: Steel 28 mm Casting 32 mm Ihivikt Extension 700mm 3 Pre-shed0.1 - 0.2 - 0.3 mm/U 15 Spindle speeds 50 - 1220 rpm Spindle stroke 165mm max. distance spindle - base plate 1300 mm max distance spindle clamping block approx. 800mm Dimensions clamping cube 470mm550mm500mm high Clamping area foot 870700mm Hoe adjustment boom approx. 620 mm Spindle motor 1.1 / 1.7 kW Lifting motor 0.55 kW Outside mass: Length 1400 mm; width 700 mm; height 2300 mm Weight approx. 1100 kg

A paper drill is sold. This was in use until its closure about 5 years ago. Machine can be inspected under electricity

Drill stand Manufacturer Neuhauser Type Connector 12S1 Year of construction 1999 Table size approx. 1 m x 0.50 m Total height approx. 1.80 m Holder approx. 42-43 mm The drill is not one of them Arm can be swivelled on both sides Item location: 58730 Fröndenberg/Ruhr The machine can be visited and tried out. A forklift/crane for loading is available. It is possible to expertly examine the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty / guarantee is excluded. The goods are sold ex location / warehouse, with the transfer of risk to the buyer there, this also applies to a shipment on our part, which we have carried out on your behalf. ...

MOVING COLUMN MILLING-BORING MACHINE Condition Used Very good condition Control type Selca S4060-D Table length 2.800 mm Table width 1.100 mm Table height 210 mm T-slot dimensions Centre 22H7 - Others 22 H8 Number of T-quarries n. 7 T-slot spacing 160 mm Max. permissible weight 10.000 Kg X axis stroke 2.500 mm Y-axis stroke 1.675 mm Z axis stroke 1.250 mm Fast 30.000 mm/min Axle motor torque 58 Nm Automatic head Axis A 2,5° - Axis B 1° Spindle cone ISO 50 DIN 69871 Rotational speed 5,000 rpm Spindle power 17 Kw Tool change 40 positions N. 2 constant power speeds I range 250-1250 rpm - II range 1000-5000 rpm Clamping system BERG pliers Selbox S2 remote flyer

Audax Mk3

Code: 0072 Brand: T.O.P. ITALIA Model: FS 850 - CE Standard Drilling and inserting gluing machine + dowel pins on horizontal workpieces for furniture, custom-made furniture, kitchens, bathroom furniture - CE Standard - Year 2018 Technical data: Maxworkable length mm 1600 Max workable height 850 Panel thickness mm 8 - 50 Independent drilling aggregate: Rotation speed 6000-18000 rpm - Max drilling depth mm 35 - Drilling depth adjustment - Hole cleaning system Glue + dowel insertion unit: Dowel dimensions mm 8 x 30 - Max dowel protrusion 15 mm Glue and water system: Container for automatic glue feeding and system cleaning Feeder for automatic pin loading Numerical control and operator interface: Albatros numerical control for 4-axis control - Touch screen supervisor PC - Monitor 12" TFT - Windows operating system - Parametric CAD 3D TPAEdi32 Compressed air 6 bar Overall  ...

Technical data: - Drilling capacity in steel ST 60 40 mm - Drilling capacity in steel ST 60 45 mm - Drilling spindle holder MK 4 - Drilling spindle stroke 200 mm - Extension 385 mm - Table with 2 T-slots with hand crank adjustable height - Table size 550 x 480 mm - min. / max distance table / drill spindle 120 / 650 mm - Column diameter 200 mm - Feed electromagnetic 0.1 - 0.2 - 0.3 - 0.4 mm/U. with overload protection - Drilling spindle speeds infinitely variable in 3 stages 60 - 1900 rpm. - Drive 400 V / 3 kW - Space requirement approx. W 700 x H 2120 x D 1100 mm - Weight approx. 700 kg - with: - Thread cutting device - Coolant device - digital speed display

Extension 1250 mm

Extension 1600 mm

Technical data: - Drilling capacity in steel ST 60 40 mm - Drilling capacity in steel ST 60 55 mm - Thread cutting device - Drilling spindle holder MK 4 - Drilling spindle stroke 180 mm - Extension 350 mm - Height-adjustable with 2 T-slots 720 x 560 mm - max. Distance table - drilling spindle 550 mm - max. Distance machined base plate - drilling spindle 1140 mm - Column diameter 200 mm - Feed-electromagnetic 0.15 0.2 - 0.3 - 0.36 mm/U with overload protection - Drilling spindle speeds infinitely adjustable 60 - 210 + 210 - 765 rpm - Drive 400 V / 2.3 / 3.4 kW - Lighting - Quick-release drilling chuck - Space requirement approx. W 750 x H 2050 x D 1050 mm - Weight approx. 850 kg

The machine is completely overhauled and is then as good as new! The machine gets a completely new electric satisam with our control system. Technical specifications Drilling process: ELB Number of drilling spindles: 1 Min. Drilling diameter 4 mm Max. Drilling diameter 30 mm Max. Drilling depth 600 mm with drilling diameter 4mm / with larger drilling diameters max. Drilling depth 1000 mm Max. Rapid traverse speed X + Z axis 4000 mm / min Max. Rapid traverse speed y-axis 2000 mm Travels X-axis horizontal approx. 700 mm Y-axis vertical approx. 300 mm Z axis designed for max. Drilling depth 1000 mm

- for processing hinge systems and connection fittings - Advantages of hole-row drilling in the system 32 - Machine stand with lift - Switching console - Foot pedal - Pneumatic connection (6 - 7 bar, air consumption per stroke 1.2 ltr.) - Blow-off gun incl. hose and T-connection - Drilling gearbox with 19 spindles - pneumatic holders - Press-in die present - Stop ruler - Table profiles - Wooden pad - Suction nozzles (diameter 80 mm) The machine is mounted on a mobile cabinet and can also be delivered with it. The machine is completely cleaned and has been checked for its function. (Changes and errors to technical data and prices reserved!)

Key data: 16

- Table diameter: 250 mm - Adjustable height table (clamping height): 0 - 630 mm - Drill chuck: RB 18-16 L (drill diameter up to 16 mm) - Electric connection: 220 V, 50 Hz, 510 W (motor specification) - Dimensions of the stand: 0.50 x 0.30 m - Transport dimensions (HxWxD): 1.80 x 1.20 x 0.70 m (Changes and errors to technical data and prices reserved!)