drilling and milling used for sale

Cooper / SKF - Batch of industrial bearing housings and bearing components 343KG

Dadaux TITANE 45 Liter Cutter Stainless Steel used Stainless steel cutter with 6 cutter head and knife shaft brake Two speeds for knife shaft and bowl Machine has the following defects: Screw for plaster opening is missing 4 feet missing Noise protection cover broken Main switch toggle broken Lamp cover of the control panel is missing Bowl runs slightly out of round The shortcomings have already been taken into account in the pricing Video about test run available

Turning length: 1000mm; Factory number: 37895; Turning diameter over bed: 500mm; Turning diameter over support: 280mm; Tip height: 250mm; Spindle Passage: 71mm; Speed range: 18-1800/36 step rpm ; equipped with digital display, Make: Fagor ; various accessories, Top grains, Turning steels etc.

70x VKBA3501 SKF 11x VKBA625 SKF 1x VKJC3548 SKF 3x VKJC3960 SKF 13x VKPC84215 SKF 715x OW-4230-825D INA and more

Condition: unchecked Item is sold as is Weight may be ggbfs. Deviate.

max. plate width: 80 cm stamp width: 425 mm serial no.: 174 plate punch autoplate The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used packaging machine by Multivac type R 245. New 2010. Packaging machine: - produces vacuum and aerated packaging from deep-drawn and sealable bottom soft or thick film, combined with sealable top film. - has two packaging formats : 250g cube with pack size 145x92.25x approx. 40 mm 500÷600g cube with pack size 188.5x145x approx. 40 mm Power supply 400 V / 50 HZ 3/PE AC phases Rated power 15 kW Nominal current 39 A Max. precharge 50 A

FAG, SKF and SNFA - Batch of industrial bearings 282KG including super precision bearings

Handtmann VF 608 Plus, vacuum filling machine for filling, portioning, linking, with servo drive, filling capacity up to 2.000 kg/h, pressure up to 40 bar, 300 port./min, portioning from 5-100.000 g., MC control (colour), 10243 operating hours, refurbished condition.

max. plate width: 80 cm stamp width: 425 mm serial no.: 564 plate punch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Consisting of couplings, screws, flange bolts

Vacuum filling machine Vemag Robby Type 136 Filling, portioning, linking PC-Control AC Servo drive Including linking device Filling performance: depending on the goods up to 2700 kg/h Portioning weight: 5-60000 g - variable adjustable in steps from 0.1 g or 1 g Portioning speed: up to 650 portions per min (depeding on product, casing and portioning size) Speed of rotation: 0-100%, variable adjustable Linking: 0-10, variable adjustable

Vacuum filling machine Vemag Robby 2 Type 135 Filling, portioning, linking PC-Control Including loading device for 200 ltr. bins Including linking device Filling performance: depending on the goods up to 3000 kg/h Portioning weight: 5-60000 g - variable adjustable in steps from 0.1 g or 1 g Portioning speed: up to 650 portions per min (depeding on product, casing and portioning size) Speed of rotation: 0-100%, variable adjustable Linking: 0-10, variable adjustable

Seydelmann bowl cutter K 60 AC-8, year manufacture 2009, 60 liters bowl cutter, almost completely made of solid stainless steel, operation via knee lever switches, separate digital control COMMAND 1000 K in stainless housing, noise absorbing cover of special polycarbonate, central point of lubrication for knife shaft, balanceable and exchangeable knife head, 6 steplessly pre-programmable forward knife speeds, 2 reverse mixing speeds, 2 separate bowl speeds, separate control box of stainless steel with built-in main-switch, knife shaft brake electrically operated

Frey Kompakta 2-30 piston filler, straight filling, portioning, linking, suitable for all types of sausages, casing holding device optially available, 30 liters filling cylinder, LCD3 control with TFT color display, memory for 100 filling programs, portioning speed up to 250 portions/min, portioning range 5 - 10,000 g, fill level indicator, piece counter, count-based auto stop.

Bowl Cutter Seydelmann K 40 Ultra 40 liters bowl volume Operation via knee lever switches DGA control Noise reduction cover central point of lubrication Knife head with six knives Two knife speeds Two bowl speeds Two mixing speeds forwards

range L-W-H: 390 x 270 x 760 mm corner cutter: 1 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. plate width: 55 cm stamp width: 220 mm serial no.: 10101/09 plate clamping system: autoplate plate punch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. plate width: 55 cm stamp width: 220 mm serial no.: 10101/09 weight: 12 kg dimensions of press (L x W x H): 70 x 13 x 55 cm plate clamping system: Autoplate for QM 46 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SKF - Batch bearing housing, various bearings and components 44KG/li>

Batch of electronics modules and cards Condition: unused

These include: Keyless drill heads

SKF / FAG / INA / CR - Batch of various industrial bearings and oil seals

Stored in working condition. The buyer must provide his own transport. Elevator available to charge it.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. paper size: 102 x 142 cm dimensions of press (L x W x H): 250x190x220 cm weight: 250 kg serial no.: M-0514-005-05/05-08 frequency: 50 Hz voltage: 400 V palletising unit The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. plate width: 80 cm stamp width: 425 mm serial no.: 1132 Plate punch for Heidelberg S-Offset The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Includes cabinet with tools

max. plate width: 80 cm stamp width: 425 mm serial no.: 5136 Plate punch for Heidelberg S-Offset The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. plate width: 52 cm stamp width: 220 mm serial no.: 16548 plate punch for GTO or QM 46 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. plate width: 50 cm stamp width: 220 mm serial no.: 4184/20 Dimensions (L/W/H): 60x20x50 mm plate punch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

" Item: Height measuring and scribing device / precision measuring stand Manufacturer: unknown Type / model: unknown Condition: used, good mechanical condition • Solid cast iron base with round support/reference plate (Ø approx. 57 mm) • Vertical column with adjustable measuring arm • Fine adjustment via lateral levers / clamps • Front mount for dial gauge, probe or scribing tip "

max. plate width: 920 cm stamp width: 425 cm Dimensions (L/W/H): 550/1000/1220 cm plate punch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cito System for SM 52 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

serial no.: 1800 Dimensions (L/W/H): 70x70x120 cm Wire-O-System (closer only) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

LDK / Hiwin / Jama - Batch of rod ends, linear bearings and bearings 329KG

Schaeffler / SKF - Batch of industrial components with grease & lubrication units 190KG

Batch of turning steels and cutting tools consisting of various turning steels in various sizes, sometimes with tools Transport dimensions: 1,200 x 800 x 400 mm, approx. 130 kg

max. plate width: 74 cm stamp width: 340 mm serial no.: 13434 dimensions of press (L x W x H): 80 x 95 x 120 cm weight: 100 kg Thermo plate bender for The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. paper width: 68 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. plate width: 52 cm stamp width: 220 mm serial no.: 3851/15 Dimensions (L/W/H): 60x20x50 mm plate punch QM 46 or GTO The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.