drilling and milling used for sale

1400x720x440mm 1300x680x500mm Auction-ID: A1-40112-129

Equipped with material station and airfilter. Rolls of filament do not belong to the lot. Printer is 3 years old. Auction-ID: A1-40112-222

Equipped with LED lighting, WCDs 230V, air couplings, etc. Auction-ID: A1-46547-252

Peripheral matters around do not belong to the lot Auction-ID: A1-46547-131

Table approx. 125 x 45 x 105 cm Conveyor belt approx. 380 x 57 x 83 cm Castors approx. 49 cm, Ø 50 mm Bunker approx. 307 x 98 x 114 cm Edges bunker approx. 24 cm high Auction-ID: A1-40112-171

Equipped with LED lighting, WCDs 230V, air couplings and dust extraction. Includes pneumatic sander. Auction-ID: A1-46547-281

Consisting of: 22x 500ML bottom protection, 8x primer 500ML, 6x can of filler 1500G Auction-ID: A1-46547-263

Equipped with separate pump, Auction-ID: A1-45771-7

Hitachi LCD Projection CP-WX4022WN Miscellaneous office supplies without pallet Auction-ID: A7-46410-36

Professional dosing installation for the automatic mixing of cleaning agents, suitable for use in supermarkets, catering establishments or industrial environments. Installation is equipped with several dosing pumps, hoses and connections and is linked to a rinsing/workplace with sink. Auction-ID: A1-40112-67

Desk approx. 80 x 160 cm Cabinet approx. 44 x 120 x 114 cm Conference table approx. 240 x 120 x 76 cm 6x leather chairs Whiteboard Auction-ID: A1-40112-158

Professional tool trolley, 7 drawers filled with 258 pcs tools 2 swivel wheels and 4 keys AND a Trolley incl. 725 pieces of tools and 2 keys Auction-ID: A1-40256-41

Coming from Leersum; from a riding school with horses Completely restored to the steel Construction: steel frame, 3x treated with Hammerite Superstructure: waterproof wood Materials: extensive use of galvanized and stainless steel fasteners Roof: equipped with waterproof plywood with truck tarpaulin, walkable Layout: front with rotating carousel Interior: benches inside removable Floor: plastic hollow core sheets (moisture resistant) with PVC laminate and moisture foil Electricity: fully compliant with applicable standards Equipped with automatic battery charger / inverter Additional inverter for lighting while driving Connections: 380V and 230V Cabling: internet (coax and UTP) available Dimensions (LxWxH): approx. 770 cm (excl. drawbar) + 180 cm drawbar to towbar x 175 cm x 265 cm Auction-ID: A1-40112-1

Hitachi LCD Projection CP-WX4022WN Miscellaneous office supplies without pallet Auction-ID: A7-46410-35

Consisting of 2x MICROGATE OptoGait sensor unit (1050x90x100 mm) and 1x LIFE FITNESS treadmill Auction-ID: A7-46661-6

Lot consisting of: Steel workbench, back wall with tools. Buyer is responsible for disassembly. Auction-ID: A1-46547-298

Total approx. 6x various table; approx. 15x various seating furniture Auction-ID: A1-45771-196

Buyer is responsible for disassembly on the collection day Auction-ID: A1-46547-130

HÄNER HCM250 Concrete mixing bucket for wheel loaders and excavators without mount Working width: 1140 mm Height: 890 mm Depth: 710 mm Nominal capacity: 250 l Maximum capacity: 290 l Curb weight: 505 kg Concrete weight: 605 kg Total weight: 1080 kg Required oil volume: 40-90 l/min Maximum pressure range: 240 bar Drive Type Mixing Shaft: Chain Important safety note: The total weight of the mixing bucket may not exceed 90% of the tipping load (kinked) of the carrier device. Our HCM250 concrete mixing bucket has the following data and specifications: – Side panels and base body made of 10mm S355 – Mixer screw rings made of wear-resistant HB500; Thickness 12 mm – Mixer shaft made of C45 solid steel; Diameter 65 mm - Cutting edge made of 20mm HB400 – Roller bearings with free-moving rollers – central hydraulic drain port piston rod protection – high-qualit ...

Consisting of 2x MICROGATE OptoGait 0GA002 sensor unit (1050x90x100 mm), 8x MICROGATE OptoGait 0GA004 sensor unit (1050x90x40 mm), 1x MEDION MT28G PC, 1x SAMSUNG S27F350FHU monitor as well as 1x keyboard and 1x mouse, incl. transport bag Auction-ID: A7-46661-2

This room is located on the first floor, there is no elevator Auction-ID: A1-45771-212

Security saw does not work. Workbench/support workbench dimensions: 155x68x101 cm. Warehouse trolley with vice dimensions: 128x69x98 cm Auction-ID: A1-41996-108

8x new electric fans (\"Bilge Blower\") from TMC 1x used fan from Vortice without pallet Auction-ID: A7-46410-107

1 tool trolley and 1 trolley. Tool trolley 7 drawers, 260-piece set, all essential hand tools directly within reach, incl 2 keys AND a decent tool trolley, 4 trays incl 238 pcs tools, combination locks Auction-ID: A1-40256-127

Consisting of: 1x pallet rack, hoses, fastening materials, paper, bearings, electrical parts, tools, PVC, pneumatic cylinders, expansion stairs, electrical cable, lighting, racks (6x), 4x pantry, fuses Auction-ID: A1-46553-112

Working volume 4000L; equipped with steel walkway 1000x9000 mm; tanks are connected to each other by a stainless steel profile; This is sawn through by our external partner. Auction-ID: A1-45771-4

Technical data Manufacturer: MUTZ Maschinenbau GmbH Machine type: Feeding / discharge of middle layers Application: Transport and separation of timber middle layers Pneumatics: 80 Nl/min at 6 bar Voltage: 400 V / 3 phases Power: 4 kW Control voltage: 24 V Installation: Indoor area (covered) Workpiece length: 600 – 2,750 mm (max. 3,200 mm) Workpiece width: 300 – 1,300 mm Workpiece thickness: 25 – 65 mm Stacking height: max. 1,600 mm Working height: 950 mm ± 20 mm Output: approx. 1 part/minute Max. weight: 200 kg Configuration Automatic feeding and ejection system for middle layers Suitable for wood and wood fibre materials Integration into production lines (e.g. door production) Transfer to downstream transport or transfer cars Auction-ID: A1-46310-1156

2x xtreme speaker, 2x Charge speaker, 1x Flip, 1x DJI OM4 smartphone stabalizer Auction-ID: A1-45771-81

Industrial washing/rinsing installation Version: Complete installation with infeed conveyor and sink Application: Cleaning/washing of products (agricultural/industrial) Construction: Steel frame with plastic pipes and spray system Transport: Elevator belt available Equipped with: Water barrel Drum dimensions (LxWxH): approx. 157 x 157 x 147 cm Pump: Industrial submersible/circulation pump available Pump specifications: 3~50Hz, approx. 5.9 kW, 1450 rpm (according to nameplate) Protection class: IP68 (suitable for immersion) Winch: Electric hoist / winch mounted on gantry Year of construction of the winch: 2020 Winch capacity: approx. 300 – 600 kg Auction-ID: A1-40138-204

10-cup filling machine; For various sizes of cans; approximately 4000 per hour; without infeed belt, with conveyor belt and blower Auction-ID: A1-45771-5

Various license plates of various nationalities and grills from Volvo, among others. The buyer is responsible for dismantling on the collection day. Auction-ID: A1-46547-273

HÄNER HCM300 Concrete mixing bucket for wheel loaders and excavators without pick-up Working width: 1330 mm Height: 800 mm Depth: 840 mm Nominal capacity: 300 l Maximum capacity: 340 l Curb weight: 550 kg Concrete weight: 800 kg Total weight: 1350 kg Required oil volume: 40-90 l/min Maximum pressure range: 240 bar Drive Type Mixing Shaft: Chain Important safety note: The total weight of the mixing bucket may not exceed 90% of the tipping load (kinked) of the carrier device. Auction-ID: A1-46656-1325

YEAR 2001 ; The AM 02 Universal is an electro-pneumatic universal wire stripping plier, for the fast and reliable processing of bulk insulated Z+F terminals from 0.5 mm² to 2.5 mm² (AWG 20 – 14) with a crimping length of 6 mm to 12 mm. Optional additional tool kits are available for 0.34/4 mm² (AWG 22/12). Auction-ID: A1-46617-50

BRAND : Mecal - KMI - Inarca - Comtec ; mechanical and electro-pneumatic mini-applicators, in different front and side models, from different brands, including: Mecal, KMI, Inarca, Comtec. Auction-ID: A1-46617-24

Overview  This isobaric maturation tank was manufactured in 2019 by Spadoni. It is designed for the isobaric and isothermal maturation of beverages under pressure, with a working capacity of 1,200L (12 hL) and a total volume of 1,300L (13 hL). The tank is certified up to 3 bar (PED) and equipped with high-quality fittings and insulation. Further information on request. Technical data  Capacity: Working: 1,200 L / 12 hL Total volume: 1,300 L / 13 hL Pressure: Working pressure: 2 bar Shell: 0.49 bar Factory hydraulic test: 2 bar Certified (PED): 3 bar Material: AISI 304 stainless steel Insulation: 80 mm polyurethane foam on cylinder and bottom head, stainless steel covered Finish: Interior: 2B with polished welds Exterior: brushed grain 120 with polished welds Heads: Klopper type (top and bottom) Cooling: Cooling jacket on the cylinder Manway: Isobaric Ø400 mm, pressure-resistant up to  ...

Overview  This fermentation tank package was manufactured between 2012 and 2019 by Oxinox and Slowbeer. It consists of isobaric and atmospheric stainless-steel fermenters with different capacities. Personal inspection is possible. Technical data  Total tanks: 8 units Isobaric tanks: 5 units Atmospheric tanks: 3 units Material: Stainless steel (316-L for Oxinox tanks) Scope of Delivery  Isobaric Fermenter (4x) | Oxinox | Oxi-19 | 2019 | 1,600 L each Atmospheric Fermenter (3x) | Slowbeer | Plano 1200L | 2012 | 1,200 L each Isobaric Fermenter | Oxinox | Oxi Clooper | 2016 | 1,400 L  

Height=0.4 m, Overall length= 0.32 m, Overall width= 0.78 m, Net weight= 31 kg,

Height=0.4 m, Overall length= 0.32 m, Overall width= 0.78 m, Net weight= 31 kg,

Height=0.4 m, Overall length= 0.32 m, Overall width= 0.78 m, Net weight= 31 kg,

We are selling a new unused but defective tool magazine with tool changer for a Makino PS 95. The magazine body was broken in two parts with a crane hook during unloading of the machine from its transport box. Also some tool pots are damaged. Can be repaired or used as spare parts

max. workpiece diameter:29 mm min. workpiece diameter:26 mm workpiece length:66 mm the system was originally delivered for the following workpiece sizes: diameter 26mm - 29mm length 65mm - 66mm Changing parts in the clamping device, handling, etc. would probably result in diameters of up to approx. Ø50mm Total length will probably be almost 400 mm possible with a few conversions. Also dependent on tool lengths, machining lengths on the component, etc. Workpiece: Piston pin Drawing number: WHT 000 718, WHT 000 718 A Workpiece dimensions (Ø, WxH): Ø26 x 66; Ø29 x 65 Length: 66 or 65 mm Material: 17Cr3 Quantity: xxx parts / year Cycle time: 5 sec. However, workpiece lengths up to 600mm are manageable. The machining diameter can be adjusted if the appropriate tools are available. The clamping station can currently only accommodate this product. However, this can be adapted by changing th ...

max. wheel diameter:300 mm max. number of teeth:999 max. module:5 total power requirement:10 kW weight of the machine ca.:1.800 Kos. dimensions of the machine ca.:1300 x 1450 x 2250 mm The Gear Tooth Deburring machine ? ZEM 300 for deburring of splines gear wheels and shafts The advantages at a glance - Vertical workpiece spindle - Chamferring, debburing and smoothing - Simultaneous Processing of 2 Gears - Dry Processing - Repeat accuracy when adjusting the tools - Simple integrated Pick up swing arm or linear loader - Crane hook machine Workspace Swing Diameter: 300 mm Process Diameter: 300 mm Workpiece Length: 450 mm Main Spindle Spindle Flange: Zylindrisch D=120 mm Front bearing spindle: 100 mm RPM max: 1500 U/min AC-Synchronmotor: 50 Nm Clamping cylinder : pneumatic Clamping force (5 bar): 10 kN Working axis swing arm for chamferring tool Feed force: 3 kN Ball screw drive: 25x5 P ...

throat:580 mm tool adaptor:drm. 130 weight of the machine ca.:0,1 t dimensions of the machine ca.:0,4 x 0,4 x 0,58 m used spindle support bearing for spindle diameter 130 mm Texte, Bilder, Grafiken, Layout, Strukturen und Algorithmen etc. unterliegen weltweitem Urheberrecht. Unerlaubte Verwendung der Daten, werden sowohl strafrechtlich als auch zivilrechtlich verfolgt. Das ausschließliche Urheber- / Nutzungsrecht dieser Daten wurde nachfolgender Person eingeräumt. Copyright © 2005-2024, Josef Weber. All rights reserved.

Industrial Deburring Stations – Year 2019 SEW USOCOME actuator – Pneumatic control - General Description: We offer for sale these industrial deburring stations in good condition, year of construction 2019, designed for deburring operations in industrial environments. Robust, compact and safe stations, ideal for mechanical, machining, sheet metal or industrial subcontractors. - Technical characteristics Equipment Type: Deburring Station Year: 2019 Engine : SEW USOCOME Engine type: DRN80M2/BE05/FI B3 Maximum speed: 2860 rpm Order Type: MCLTPB0015-5A3-4-00 Structure: Column station with reinforced base - Integrated equipment Pneumatic up/down Foot pedal control Adjustable protective screen Built-in light stand Complete electrical box with dimmer and protections - Benefits Recent Material (2019) Rugged industrial manufacturing Engine recognized for its reliability Quick and easy inst ...

Industrial Deburring Stations – Year 2019 SEW USOCOME actuator – Pneumatic control - General Description: We offer for sale these industrial deburring stations in good condition, year of construction 2019, designed for deburring operations in industrial environments. Robust, compact and safe stations, ideal for mechanical, machining, sheet metal or industrial subcontractors. - Technical characteristics Equipment Type: Deburring Station Year: 2019 Engine : SEW USOCOME Engine type: DRN80M2/BE05/FI B3 Maximum speed: 2860 rpm Order Type: MCLTPB0015-5A3-4-00 Structure: Column station with reinforced base - Integrated equipment Pneumatic up/down Foot pedal control Adjustable protective screen Built-in light stand Complete electrical box with dimmer and protections - Benefits Recent Material (2019) Rugged industrial manufacturing Engine recognized for its reliability Quick and easy inst ...

1x BRUB445232AA SKF 4x BRUB445232AA SKF 4x VKBA1938 SKF 4x VKBA3406 SKF 69x VKC2025 SKF 148x VKC2025 SKF 41x VKC2080 SKF 3x VKHB2240 SKF 1x VKM38012 SKF 2x VKPC83420 SKF 1x VKPC84406 SKF 1x VKPC84406 SKF 2x VKPC84600 SKF 1x VKPC85620 SKF 20x F-110096.2 INA 1x F-112201 INA 5x F-45953 INA 10x F-93681 INA 2x BDF395NA01 SNR 10x 48TKA3301 UN3S NSK 5x 48TKB3202 UN3S NSK 1x 55TKA3102A UN3S NSK 1x 22/W2.1/2ND MS44 RHP 38x RCT3157GD2 Koyo and more

CNC Control: Fanuc 0T-F (with C Axis) Diameter Above Bed: 500 mm Max Turning Diameter: ~280 mm Max Turning Length: ~500 mm Bar Capacity (Main Spindle): 65 mm Bench Design: 30° or 45° Inclined Spindle Nose: ASA 6" Main Spindle Speed: Up to 4,000 RPM Sub-Spindle Speed: Up to 4,000 RPM C-Axis: 0.001°Turret : 12 stations Tooling type: VDI 40 Speed motorized tools: ~3,000 - 4,000 rpm Lots sold as is, unchecked, with tool and tool holder.

Technical data Manufacturer: WEILER Model: Commodor B Machine Type: Lead and Pull Spindle Lathe Turning diameter over bed: 380 mm Turning diameter over slide: 190 mm Center width: 750 / 1000 mm Spindle bore: approx. 56 mm Spindle speed: 25 – 2000 rpm Connected load: 4 kW Voltage: 380 V Weight: approx. 1300 – 1500 kg Configuration Lead and pull spindle Tapping function (metric / inch) 3-jaw chuck Additional chuck Multifix tool holder Tailstock Coolant Setup Chip tray Note Technical data was taken from the nameplate and machine documentation. Specifications may vary depending on the version.

Marking plate / measuring plate with tripod and holder Used marking or measuring plate with attached tripod and adjustable holder, suitable for marking, testing and measuring work in tool and machine construction.     •    Design: marking plate / measuring plate     •    Surface: finely machined, grid structure     •    Dimensions plate: approx. 250 × 360 mm     •    Plate thickness: approx. 34 mm     •    Material: Steel / cast     iron •    With column stand and adjustable holder

CNC control: Heidenhain TNC 530 Machine 5 simultaneous axes Strokes: X = 730 mm, Y = 560 mm, Z = 560 mm Spindle speed: up to 12,000 rpm Cone: SK40 Feeds: 20 – 20,000 mm/min Fast feeds: 30 m/min Table: 1000 x 600 mm Max load table: 800 kg Tool changer: 24 / 30 positions Machine hours≈ 31,481 h Spindle hours≈ 25,087 h Lots sold as is, unchecked, without tools or tool holders.