drill used for sale

Drilling capacity: 0 mm Throat: 0 mm Spindle taper: 0   CNC Brand: 0 CNC Model: 0 Technical data Drill capacity in steel: 12 mm Table length: 350 mm Table width: 280 mm Depth of throat: 200 mm Spindle stroke: 100 mm Spindle speeds: stepless from: 400 rpm up to: 6000 rpm Distance from table to spindle nose: max: 400 mm Voltage 50 Hz 3x: 380 Volt Overall dimensions machine: Length: 900 mm Width: 650 mm Height: 1850 mm Various accessories: Drill chuck Lamp Cast-iron base

Drilling capacity: 0 mm Throat: 0 mm Spindle taper: 0   CNC Brand: 0 CNC Model: 0 Technical data Drill capacity in steel: 2 - 22 mm Max. drill depth: 120 mm Table length: 500 mm Table width: 400 mm Spindle speeds: stepless from: 50 rpm up to: 4000 rpm Power: 1.5 HP Machine´s weight about: 150 kg Overall dimensions machine: Length: 400 mm Width: 500 mm Height: 1000 mm

bore capacity in steel (diameter): 32,0 mm arm length: 310 - 820 mm workpiece height max.: 370 - 870 mm turning speeds: 75 - 1220 U/min spindle taper MT: 4 MK base plate: 825 x 690 mm threading: 24 M quill stroke: 250 mm quill feed: 0,1/0,16/0,25 mm/U travel x / y: 500 / 510 mm total power requirement: 2,25 kW weight of the machine ca.: 1200 kg. range L-W-H: 1470 x 750 x 2100 mm Description : - Large-sized base plate - ideal for processing large workpieces - Thick-walled, polished column for increased sliding properties of the boom - Extension arm and drill head with independent hydraulic clamping - Simple height adjustment of the extension arm using a lifting motor - Ideal for drilling, countersinking, reaming and thread cutting - Hardened and ground gears, running in an oil bath - Good sliding of the drill head on the boom thanks to the ground surface scope of delivery : - Cube table - ...

Technical data Drill capacity in steel: 13 mm Table length: 250 mm Table width: 250 mm Spindle cone: B 16 Depth of throat: 208 mm Spindle stroke: 90 mm Spindle speeds: number (steps): 4 from: 450 -750 rpm up to: 1300 - 2300 rpm Distance from auxiliary table to spindle nose: min.: 32 mm max: 340 mm Distance from table to spindle nose: max: 510 mm Voltage 50 Hz 3x: 380 Volt Power: 0.5 HP Machine´s weight about: 85 kg Overall dimensions machine: Length: 770 mm Width: 350 mm Height: 1000 mm Various accessories: Drill chuck

Technical data Drill capacity in steel: 13 mm Table length: 250 mm Table width: 250 mm Spindle cone: B 16 Depth of throat: 208 mm Spindle stroke: 90 mm Spindle speeds: number (steps): 4 from: 450 - 750 rpm up to: 1300 - 2300 rpm Distance from auxiliary table to spindle nose: min.: 32 mm max: 340 mm Voltage 50 Hz 3x: 380 Volt Power: 0.5 HP Machine´s weight about: 85 kg Overall dimensions machine: Length: 770 mm Width: 350 mm Height: 1000 mm Various accessories: Drill chuck

Technical data Min. drill capacity: 2.0 mm Max. drill capacity: 32.0 mm Spitzwinkel min.: 60 ° max.: 180 ° Diameter of grinding wheel: 150 mm Width of the grinding wheel: 40 mm Drilling cap. of grind.wheel: 50 mm Grinding wheel speeds: up to: 2800 rpm Voltage 50 Hz 3x: 380 Volt Power: 1.00 HP Machine´s weight about: 450 kg Overall dimensions machine: Length: 800 mm Width: 750 mm Height: 1300 mm

Technical data Min. drill capacity: 0.2 mm Max. drill capacity: 6 mm Drilling length: 0 - 80 mm Numbers of flutes: 1 - 72000 Diameter of grinding wheel: 150 mm Width of the grinding wheel: 31.75 mm Voltage 50 Hz 3x: 380 Volt Grinding spindle motor: 1.5 kW Machine´s weight about: 760 kg Overall dimensions machine: Length: 1200 mm Width: 1100 mm Height: 1650 mm

Technical data Min. drill capacity: 0.2 mm Max. drill capacity: 6 mm Drilling length: 0 - 80 mm Numbers of flutes: 1 - 72000 Diameter of grinding wheel: 150 mm Width of the grinding wheel: 31.75 mm Voltage 50 Hz 3x: 380 Volt Grinding spindle motor: 1.5 kW Machine´s weight about: 760 kg Overall dimensions machine: Length: 1200 mm Width: 1100 mm Height: 1650 mm

Technical data Min. drill capacity: 0.2 mm Max. drill capacity: 6.0 mm Drilling length: 0 - 80 mm Numbers of flutes: 1-2-3-4 Total stroke: 50 (Z) mm Diameter of grinding wheel: 150 mm Drilling cap. of grind.wheel: 31.75 mm Voltage 50 Hz 3x: 380 Volt Grinding spindle motor: 1.5 kW Machine´s weight about: 760 kg Overall dimensions machine: Length: 1200 mm Width: 1100 mm Height: 1650 mm

Technical data Table length: 660 mm Table width: 520 mm Drill capacity in steel: 23 mm Depth of throat: 365 mm Drill depth (spindle stroke): 120 mm Spindle speeds: stepless from: 45 rpm up to: 4000 rpm Feeds: number (steps): 6 from: 0.060 mm/r up to: 1.20 mm/r Voltage 50 Hz 3x: 380 Volt Total power required: 5.0 HP Machine´s weight about: 1500 kg Overall dimensions machine: Length: 1600 mm Width: 1200 mm Height: 2000 mm Various accessories: Tool holder deposit BREGNARD table Digital readout number of axis:: 2

KÄRCHER ROBO 30 pipe boring machine for pipes, flat material and profiles With this machine, tubes, flat material or profiles can be cut very quickly and accurately in a single pass. can be drilled or milled at an angle or at an angle up to  50° in such a way that filling rods or filling tubes up to 1" can be drilled or milled can be plugged through. With the standard additional clamp for the jaw chuck, you can not only cut pipes, but also transport flat material or other profiles with the feed and at the desired angle up to over Make 50° single-sided holes or through holes. The clamping jaws in the self-centering vice have a recess at the top for flat material. We are unrivalled when it comes to converting to another material! The feed is positioned at 0.1 mm with the counter with absolute or chain gauge. With the ROBO 30, you don't need to set limit switches or cams for ...

Column drilling machine IXION - MAXION type Unimax 3 Fabr. No. 201516 Year of manufacture 2009 Drilling capacity 30 mm Spindle holder MK 3 - short quill projection 260 mm Pinol stroke 125 mm Table size 360 x 500 mm Column diameter 110 mm Spindle speed 80 - 3200 rpm infinitely variable Motor power 0.8 / 1.5 kW Mains connection 400 volts, 50 Hz spindle speed via 2 V-belt stages, 2 motor speeds and infinitely variable via variator drive - Motor speed level 1 for right-hand and anti-clockwise rotation, motor speed level 2 for clockwise rotation - Handwheel for quill fine feed - Drill table Height adjustment via hand crank - Quick-action drill chuck RÖHM 1 - 16 mm - Emergency stop button Space requirements L x W x H 800 x 530 x 1800 mm Weight 230 kg very good condition; used

VOORTMAN V630 + HS540 beam drill line was built in the Netherlands. An easy-to-use machine with wide machining capabilities, allows to significantly increase the productivity of any industrial plant by fully automatic drilling, countersinking and threading of metal workpieces. All of this while maintaining low operating costs, high productivity and excellent precision. The VOORTMAN V630/1000A beam drilling machine consists of the following parts: – VOORTMAN V630 drilling unit – PEHAKA HS 540/1100 GBS band saw – roller conveyor The production line uses top-quality components from renowned brands to reduce size deviation tolerances and improve the quality of the final product. These include among others drilling heads with automatic 6-position tool changers for drills for various types of workshop work. During machining, the profile is fed to and from the workstation on a sp ...

I sell a Top Dubel drill multi-spindle drill Detel M-13, built in 2007. 3-spindle See good condition. Available the same.

bore capacity in steel (diameter): 50,0 mm arm length: 350 - 1.590 mm workpiece height max.: 645 - 1.240 mm turning speeds: 25 - 2000 U/min spindle taper MT: 5 MK base plate: 980 x 1.600 mm threading: 42 M quill stroke: 320 mm total power requirement: 4,0 kW weight of the machine ca.: 3.500 kg. range L-W-H: 2450 x 980 x 2840 mm Description : - Large-sized base plate - ideal for processing large workpieces - Thick-walled, polished column for increased sliding properties of the boom - Extension arm and drill head with independent hydraulic clamping - Simple height adjustment of the extension arm using a lifting motor - Ideal for drilling, countersinking, reaming and thread cutting - Hardened and ground gears, running in an oil bath - Good sliding of the drill head on the boom thanks to the ground surface scope of delivery : - Cube table - Reducing sleeves MK 5/4, MK 4/3, MK3 / 2 - LED mach ...

I sell an Angular drill with hanging insert suitable for tur production. MARZANI MACCHINE CHEAP WORK Year of construction: 1993 Number of drilling spindle 1 (drill head fully -7 to +90° adjustable) Number of insert heads 1 (magazine suitable for turret hanging) Insert head mechanical, screw insert Very good condition. Available the same.

Box column drilling machine make ALZMETALL type AB 3 HSTMachine -No: 1752 Year 1984Drilling capacity in steel St 60:28 mmDrilling capacity in steel St 60:40 mmDrilling capacity in casting GG 20:35 mmThread cutting steel St 60: M 22Thread cutting in cast GG 20: M 33Spindle mount: MK 3Spindle speeds stepless: 130 - 1750 rpm.Discharge: 330 mmSpindle stroke: 160 mmTable size: 600 x 460 mm3 aut. Feed rates: 0.1 / 0.2 / 0.3 mm / revDrive power: 1.0 / 1.6 kWWeight approx.: 700 kgWith- electromag. feed clutch- Semi-automatic workflow- semi-automatic thread cutting- by 200 mm extended stand- Flange quill- Return spring- Tapping device- Revolver drill head grass type ARBO 20 -No: 243xa0xa0 with 6 spindles- aut. pivoting device d. turret- hydr. feed cylinder- Depth drill with 4 depth stops- Drilling depth program switching- electr. Two-hand controlused, in very good conditionPrice on request.Delive ...

Universal deep hole drilling machine make DEGEN type UTB 500Machine -No: 061/86 built in 1986Technical specifications:Quill stroke / drilling depth: 500 mmTravel X (cross table): 400 mmTravel Y (vertical spindle head): 450 mmTravel Z (table lengthways): 250 mmDistance from the center of the spindle to the clamping surface: 250 mmmax.workpiece weight: 1000 kgTable surface area: 800 x 400 mmTable height: 1000 mmSpindle mount: MK 2Max.drilling diameter with twist drill / Speedbit drill: 16/25 mmmax.thread diameter: 16 mmQuill feed: 0 - 150 mm / min.Rapid traverse quill: 3.6 m / min8 spindle speeds: 240 - 2400 rpm.Drive power spindle: 0.8 / 1.3 kWCoolant pump: 0.07 kWServo motor: 0.65 kWTotal power requirement: 2 kWWeight approx: 980 kgDimensions L x W x H (with control panel) approx: 2420 x 1200 x 1850 mmWith- Control panel with digital display for drilling depth and drilling cycle- 2-axis  ...

Series drilling machine make WÖRNER type B 13Fabr. -No: 35616-35621 = 6 drill heads arranged in semicircleNumber of drill heads 6Drilling capacity 13 mmeach 12 speeds 280 - 3550 rpm.Quill stroke 120 mmDischarge 250 mminner semicircle 780 mmTable width 375 mmouter half circle 1155 mmDrive power 0.55 / 1.1 kWWeight approx. 2 tDimensions L x W x H 2300 x 1500 x 1470 mmWith- height adjustable design- working position = sitting in the inner semicircleused, optics industry, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Twist drill grinding machine make WERKÖ type SWB 4Machine -No: 702 built in 1988Max. Grinding range: 0.3 - 4 mmMax. Drill length: 90 mm4 point angles: 90/118/130/140 °Bevel angle: 0 - 27 °Connected load: 0.25 kWPower connection: 380 V / 50 HzExternal dimensions: 420 x 550 x 450 mmWeight approx: 35 kgused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Twist drill grinding machine make WERKÖ type SWB 4Machine -No: 327 built in 1978Technical specifications:Max. grinding range: 0.3 - 4 mmMax Drill Length: 90mm4 point angles: 90/118/130/140°Relief angle: 0 - 27°Connection value: 0.25 kWPower connection: 380 V / 50 HzExternal dimensions: 420 x 550 x 450 mmWeight approx.: 35 kgusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

4 axis deep hole drilling machine Brand: Ixion mod. TL1400 Year: 1996/1997 Mitsubishi M530 H control system Executions and Racing Sleeve TL 604 (Z) 600 mm. Sleeve TL 1004 (Z) 1000 mm. Operating unit for vertical drill (standard) (Y) 400 mm. Operating unit for vertical drill (option) (Y) 800 mm. Cross table (table surface 1375 mm. X 700 mm.) (X) 700 mm. Cross table (table surface 1675 mm. X 700 mm.) (X) 1000 mm. Mobile column in the boring direction (W) 1100 mm. Circular table (option) (B) 360 ° Work table Table surface (standard) 1375 mm. X 700 mm. Table surface (optional) 1675 mm. X 700 mm. Load on the table max 2000 kg. Bridge Tool SK 40 holder according to DIN 69871 Tightening bolts according to DIN 69872 Main spindle AC drive (3.0 kW) at 100% of the insertion ratio, S1 3.0 Kw 50% of the duty cycle, S6 5.5 kW Spindle speeds directly programmable 100- ...

Duebel hole drilling machine BORING SYSTEM 21 PRESTIGE QUICK CONNECTIONS 21 DRILLING SPINDLES AXLE DISTANCE 32 MM CENTER DISTANCE FROM THE FIRST TO THE LAST DRILL CHUCK 640 mm DRILLING DEPTH 65 mm Engine power 2 hp Aluminium stop with 2 folding straps equipped with 1 left stop 1500 mm and 1 right stop 1500 mm 5 drilling spindle droplets 2 Pneumatic hold-downs in a safe and secure manner incl. packaging Quick Connection Drilling Spindles Drill head in cast iron Cast iron work table Drilling depth adjustment via patented spiral system Pneumatic scraping of the drilling group from 00 to 90 ° adjustable in any position. Stop infinitely adjustable via millimeter scale with magnifying glass High drills over num. digital display adjustable Back-side stop max. travel 300 mm Fixed stop on 37 mm for doorband Machine built according to Ce standards

I sell a drill with cutting units COMEC FM0V8 2000, built in 1997. Working width max. 2000mm Configuration: 0 motors from below 1+1 motors from sides / angular adjustable 2 motors from behind / head angular adjustable 3 motors from above / head angular adjustable 4 pieces of material prints from above 2 cut saws from above / head angular adjustable Atypical 5-spindle drill heads Including 3 x 15mm / 2 x 25mm. Dubel heads in the price. Very good addition. Available the same.

Webo BR 35 V / 1250 radial drilling machine incl. Peiseler reversible clamp Workspace Delete. v Spindle to stand smallest 280 mm / largest 1250 mm Delete. v Spindle or drill. b. Table top smallest 0 mm / largest 900 mm Delete. v Spindle to base plate smallest 200 mm / largest 1400 mm Diameter of the drill smallest 860mm / largest 2800 mm Swivel range 2,200mm / clamping diameter approx. 240mm Aufspannfl. upper 650 x 500 mm / side 770 x 500 mm Drilling spindle 40/85 ⌀ mm Speed 30 - 1800 rpm Year of construction 1971 Further technical data can be found on the machine map Item condition: used, impeccably and top maintained. Item location: 42859 Remscheid Dismantling and transport by the buyer. The dismantling, loading, as well as transport can alternatively be offered by us.

- Thread cutting device - Control panel with OLED display - LED lighting - Quickly adjustable and ergonomic drilling depth stop - Infinitely variable speed control via central rotary knob - Thermal overload protection - Spindle stop - Drilling protection with electr. Hedge - Connection cable with Schuko plug SPECIFICATIONS - Spindle: B16 - Drilling depth: 60 mm - Projection: 220 mm - Column Ø: 70 mm - Spindle/work surface: 140 – 315 mm - Drill head height adjustment: by hand - Speed display: Digital - Drilling depth display: Digital - Feed (mm/revolution): by hand - Spindle speeds infinitely variable: 60 – 6,000 1/min - Continuous/normal drilling capacity: 10/12 mm - Thread cutting performance (depending on slope): M6 - FACTORY WARRANTY: 3 years (single shift) - OPTION Drilling package (No. 296570) Machine vice Flott [felix] 80 and quick-release drill c ...

SPECIFICATIONS: Automatic drilling and dowel insertion machine with horizontal loading and unloading system, consisting of: Loader: ESSEDUE CNC transverse drilling machine: Biesse FTT Year of construction 2003 4 upper drill heads with automatic change of vertical drills 2 X-axes 4 Y-axes 4 electrospindles with automatic tool change A total of 12 slots for tool changes Inline transverse plate turner for double-sided drilling CNC transverse drilling machine: Biesse FTT Year of construction 2004 2 upper drill heads with automatic change of vertical drills 1 X-axis 2 Y-axes Biesse FHT Transversal Drilling and Dowel Insertion Machine Year of construction 2004 High pressure bonding system: Csnpgoz93 5 + 5 injectors Large vibrating baskets with dowels ESSEDUE unloader with additional transverse outlet for individual panels

Drill grinding machine HAARMANN type HSP 30 Fabr. No. 7925 Year of construction 1974 Drill diameter max. 30 mm Grinding wheel diameter 200 mm Grinding wheel width 30 mm Grinding spindle speed 1400 / 2800 rpm Motor power 0.55 kW Mains connection 380 Volt, 50 Hz - Drive via hand crank - movement via cam disc - tip angle infinitely adjustable - Diamond dresser holder - 5 different cam discs Space requirement L x W x H 870 x 650 x 1450 mm Weight approx. 250 kg good condition; used

The new Serrmac TCS TR series milling drill has a sturdy structure that allows heavy machining and a prismatic section column. Standard configurations: Diaphragm control panel with digital display to display the number of spindle revolutions (only on VS – VR – E); Tapping with adjustment of the working depth (only on version E with Inverter); Automatic mechanical spindle descent (0.05 – 0.1 – 0.2); Refrigeration tool system; LED lighting system 24V. FEATURES IN PHOTOGRAPHY! Each Serrmac drill can be supplied customized according to every need! Contact us for more information and / or for a custom quote.

offer 22493 Specifications: - Drilling capacity in steel ST 60 40 mm - Drilling capacity in steel ST 60 50 mm - Tapping in steel ST 60 to M 42 - Drilling spindle holder MK 4 - Drilling spindle stroke 200 mm - Drilling spindle speeds infinitely adjustable 60 – 1100 rpm - Right - Left rotation - 3 feeds 0.1 / 0.16 / 0.25 mm/rev - Projection 350 mm - distance drilling spindle – table / base plate 790 / 1210 mm - Table with 2 T-slots 630 x 540 mm - Height adjustable via rack with hand crank - Drive 400 V / 1.8 / 3.5 kW - Space requirement approx. W 600 x H 2050 x D 980 mm - Weight approx. 650 kg - with: - emergency stop button - - Lighting - Quick-change drill chuck 1 - 13 mm - Coolant device - Machine vice - div. 20 pcs HSS – twist drill 8 – 20 mm

Drive motor output: 750 W / 400 V; Drilling performance steel: 25 mm; Speed range: 60 - 3050 U/min; Number of gears: 12 steps stepless; Spindle chuck: MT3; Quill stroke: 95 mm; Reach: 209 mm; table size: 308 mm x 308 mm; Keyless drill chuck: 1 - 16 mm; weight: 107 kg; Industrial motor Quiet running spindle thanks to new spindle design Machine operation with safety electrics in 24 V DC voltage Guaranteed concentricity ≤ 0.02 mm measured in the drilling spindle Right/left rotation Precision spindle bore Control panel with user-friendly, dirt- and water-resistant membrane keypad Speed display Separate emergency stop impact switch Thread cutting function Precisely machined, stable drilling table with diagonally running T-slots with circumferential cooling water channel, laterally tiltable by -45° and rotatable by 360 Drilling depth stop LED machine light integrated in the ...

HofmannLangloch drill Brand Hofmann Type LL150 Year of construction Specifications: drilling depth max. 145 mm (drill head movement) Drilling length: max. 230 mm (table movement) Vertical drilling spindell run max.135 mm Drilling: Drilling depth limitation Table: side ward movement via sep. Handle Cast iron table: solid with mechanical product clamp Height adjustment: Handwheel Motor power 1.3 kW Chuck 5 - 20 mm Condition: functionally tested

offer 22054 Specifications: - Drilling capacity - in steel 15 mm - - in aluminium 18 mm - Drilling spindle holder MK 2 - Drilling depth 70 mm - Projection spindle / column 180 mm - Drilling spindle speeds 80 - 4000 rpm - Drive 400 V 0.45 / 0.75 kW - height-adjustable drilling table 280 x 240 mm - Distance drilling spindle / table approx. 360 mm - Distance drilling spindle / base plate approx. 410 mm - Space requirement approx. W 280 x H 1700 x D 600 mm - Weight approx. 85 kg - with : - Quick-change drill chuck 1 - 13 mm - Machine vice - div. Gebr. HSS drill 5 - 15 mm

Drilling capacity: 25 mm Radius: 32 mm Spindle taper: 1   incl. X/Y Table coordianten incl. coolant system Max. drill Ø steel:25mm Max. drill Ø cast: 32mm Max. tap Ø:        M 20M Stroke pinole:     120mm Throat:            260mm Column sleeve:     110mm Spindle Taper:     3ISO/Bt/Mk Speeds / ranges:   2160Rpm Table Length:      500mm Table Width:       350mm Power:             1,5kW Length:            800mm Width:             400mm Height:            1800mm Weight:            260kg

Drilling capacity: 1200 mm Drilling depth: 1200 mm Spindle taper: 63   Number of heads: 1   CNC Brand: Heidenhain Designed for mold making also for larger counterpart its machine cubical workpieces both effiently and precisely and uses optimized drilling and milling small, medium and large scale are covered.     Working area and Drilling capacity Table dimensions: 1,100 x 1,100 mm Max. table load: 7,000 kg Drilling depth: 1,100 mm Drill diameter: 4 - 30 mm Thread cutting up to M24 Axis travel X - axis (horizontal): 1,200 mm Y - axis (vertical): 1,1000 mm Z - axis (horizontal): 1,100 mm W - axis (horizontal - swivelling): 1,600 mm A - Axis (swivel axis): +15°/- 30° B - axis (CNC rotary table): 360° Spindle and Tool changer Spindle holder: HSK-A 63 Tool change positions: 32 General data  KNOLL chip conveyor Read off prog ...

Model Forma two vertical drill beams 17 – spindly adjustable, 1 horizontal drill beam 17 – spindle mobile Sales on behalf of customers

Type: 4/60 min drill angle: 90° max drill angle: 180° 1,5 HP grinding wheel diameter: 203/51/28 mm Max dia: 4 > 60 mm Length L -- R: 1080 mm Depth Fw --Bw: 1100 mm Height: 1250 mm Weight: 345 kg

Double head paperdriller Make Elcos Model Double head Year 1990´s Details 2 head paper driller with adjustable heads Drill distance 45 - 150 mm Space behind drill heads 100 mm Operation Lever operated, single phase 240 Volts Available Direct

Year of construction: 1995 4 drilling spindles with automatic table movement adjustable drill speed Drill pad conveyor electr. Drive electr. Foot switch incl. base Price on request. We deliver and install worldwide!

Drill head, drill bit, milling cutter -1x recording drawing with the photos -Mill 5x: Ø 16 x 40 carbide tipped -Cutter 2x: Ø 15 x 40 carbide tipped -Cutter 2x: Ø 14 x 40 carbide tipped -Cutter 2x: Ø 12 x 40 carbide tipped -in wooden box -Dimensions: 250/175/H75 mm -Weight: 2.7 kg

Drill rod holder, quick-change drill rod holder AXA MULTIFIX CH50160 Tool holder: 160 x Ø 50 mm used, tested ! Dimensions: 160 x 80 x 150 mm

Twist drill, automatic drill GÜHRING UWUK Ø 36 mm HSS DIN 1897 New ! Dimensions: 210 x 60 x 60 mm

Twist drill, automatic drill GÜHRING TKM Ø 38 mm HSCO New ! Dimensions: 210 x 50 x 50 mm

Twist drill, automatic drill GÜHRING GHFW Ø 30 mm HSS DIN 1897 New ! Dimensions: 210 x 50 x 50 mm

Twist drill, automatic drill GÜHRING FHFK Ø 30 mm HSS New ! Dimensions: 180 x 40 x 40 mm

Twist drill, automatic drill GÜHRING IGD Ø 34 mm HSS New ! Dimensions: 200 x 40 x 40 mm

Twist drill, automatic drill GÜHRING BAP Ø 28 mm HSCO New ! Dimensions: 170 x 40 x 40 mm

Twist drill RECA HSS Twist drill 29,75 - 50 mm MK Shank 29,75 / 32 / 35 / 37 / 38 / 39 / 39,75 / 42 / 44 / 44 / 46 / 50 mm 14 pieces used, tested ! Dimensions: 500 x 400 x 150 mm

Hammer drill, drill HILTI TE 54 ( TE54 ) Drilling capacity steel: 13 mm Drilling capacity concrete: 52 mm 230 / 480 rpm 900 W 230 V with case Dimensions: 600 x 400 x 140 mm

Drill stand WMW BSt 20 Drilling stroke max: 90 mm ( adjustable ) Mounting drilling machine: Ø 45 mm Projection: 170 mm Maximum distance drill table to mount: 470 mm Column height: 680 mm Column diameter: 35 mm slot table: 180 x 180 mm 2x groove: groove width: 11 / 21 mm new ! Dimensions: 535 x 185 x 750 mm