129,238 used machines on RESALE, but how to find them? Machine Search
Thread cutting device Freischneiden Setup Drilling depth shut off programmable Drilling depth and speed display - digital Thread cutter M20 (depending on elevation) variable speed of 125-4000 U/mon in two stages, stage change of belt apportionment. Drilling capacity 25/30 mm Spindle MK 3 Drilling depth 125 mm Projection 280 mm Usable surface (pivoting) 420 x 340 mm Feed 0-300 mm / min stepless Table height with rack and pinion Machine dimensions (W x D x H) 520 x 820 x 1900 mm Motor three-phase 400 V pole changing bar 0.9 / 1.45 kW Weight 300 kg Including drilling package consisting: taper mandrel, Chuck, Vice and T - Groove set. Option: spindle stop and chip fracture module 690 EUR DELIVERY: free House including packaging NOT THE RIGHT MACHINE? WE DO ALSO OTHER AFLOAT PRODUCTS - ASK FOR A QUOTE! FLOTT BASE PARTNER .
Drilling depth and speed display - digital Thread cutting device M30 (depending on elevation) R1 spindle speed with continuous transmission speed series 100-2000 1 / min R2 spindle speed with continuous transmission speed range 70-1400 1/min Drilling capacity 35/40 mm Spindle MK 4 Drilling depth 160 mm Throat depth 300 mm Usable surface (pivoting) 590 x 450 mm Feed by hand Table height with rack and pinion Machine dimensions (W x D x H) 610 x 850 x 1920 mm Motor three-phase 400 V pole changing bar 1,5/3,0 kW Weight 420 kg Including drilling package consisting: taper mandrel, Chuck, Vice and T - Groove set. DELIVERY: free House including packaging NOT THE RIGHT MACHINE? WE DO ALSO OTHER AFLOAT PRODUCTS - ASK FOR A QUOTE! FLOTT BASE PARTNER .
Key data: 40 mm
Demonstration article Condition: Used Premium quality MADE IN SWEDEN The gearbox is built with the traditional and tested technology for the highest possible torque. Helical gears in combination with steel against reinforced fiber material provide a high degree of efficiency, a low noise level, as well as a long service life and an almost maintenance-free transmission. Specifications: Drilling capacity in steel: 40 mm Threading capacity M28 Spindle holder (turning spindle) MK 4 Speed range 90 - 1500 rpm Speed levels 8 Quill stroke 190 mm Quill feed stages 4 Column diameter 140 mm Quill feed 0.10/0.16/0.24/0.33 mm/rev T-slots, width M14 mm Drilling table stroke 830 mm Spindle projection 330 mm Drilling table rotatable ± 360° Quill spacing base 1210 mm Quill spacing table 215 - 830 mm Drilling table area 500x400 mm Motor power (2-stage) 2200 / 2600 W M ...
Thread cutting device Freischneiden Setup Drilling depth shut off programmable Drilling depth and speed display - digital Thread cutting device M30 (depending on elevation) R1 spindle speed with continuous transmission speed series 100-2000 1 / min R2 spindle speed with continuous transmission speed range 70-1400 1/min Drilling capacity 35/40 mm Spindle MK 4 Drilling depth 160 mm Throat depth 300 mm Usable surface (pivoting) 590 x 450 mm Feed 0-300 mm / min stepless Table height with rack and pinion Machine dimensions (W x D x H) 610 x 850 x 1920 mm Motor three-phase 400 V pole changing bar 1,5/3,0 kW Weight 420 kg Including drilling package consisting: taper mandrel, Chuck, Vice and T - Groove set. Option: spindle stop and modulus of rupture of chip 660 EUR DELIVERY: free House including packaging NOT THE RIGHT MACHINE? WE DO ALSO OTHER AFLOAT PRODUCTS - ASK ...
Technical data: -Drilling capacity approx. 30 mm - spindle mount MT 3 -Spindle speeds in 2 steps continuously variable 80-1400 RPM -Table surface 390 x 420 mm -Drill unit by hand crank height adjustment -min / max distance table / spindle 220 / 580 mm -Drilling spindle stroke 150 mm -Spindle projection powered 280 mm â 400 V / 1.3 / 2.3 kW -Space requirement approx. B 480 x H 880 - H 1200 X 1050 mm -Weight approx. 250 kg -Table base with storage space B 600 x h. 910 x H 800 mm -Weight 200 kg
Duration / ALB ear power 35/40 mm Thread cutting capacity Max M30 (Steigungsabhängig) Hand-reversing switch for forward link. Undervoltage, thermal overload protection, Spindle MK 4 Drilling depth 160 mm Throat depth 300 mm 2johiqzz Column diameter 110 mm Usable surface [BxL] 420 x 340 mm Speed display scale Drilling depth indicator scale Drilling depth stop with fine adjustment Table height with rack and pinion Motor three-phase 400 V pole changing bar 1.5/3 kW Spindle speeds with continuously variable transmission 100-2000 1 / min Machine size (WxDxH) 610 x 850 x 1920 mm Weight 420 kg Including drilling package consisting: taper mandrel, Chuck, Vice and T - Groove set. Warranty: 3 years Shipping time: immediately, free loaded DELIVERY: free House including packaging NOT THE RIGHT MACHINE? WE DO ALSO OTHER AFLOAT PRODUCTS - ASK FOR A QUOTE! FLOTT BASE ...
Key data: 16 mm, 150 mm
KBM 16 T VARIO SET action Composed of: V-belt bench drill Model KBM 16 T VARIO 1 pcs vise 3' / 75 mm 2 pcs clamping screws T12mm 1 pcs.HSS twist drill cassette 1-13mm, 25 pcs. 1 pc. cutting oil spray 350 ml Specifications Drilling capacity in steel 16 mm Spindle holder (rotary spindle) MK 2 Speed range 340 - 2200 rpm Speed levels infinitely variable Quill stroke 90 mm Column diameter 60 mm T-slots, width 14 mm Drilling table stroke 275 mm Spindle projection 150 mm Drilling table swivel ± 45° Drilling table rotatable ± 180 ° Quill spacing table 360 mm Drill table area 243x243 mm Motor power 550 W Mains connection 230/50 V/Hz Cubature 195x195x360 mm Base plate area (lxw) 250x415 mm Height (total) 910 mm Weight 42 kg
right / left Number of spindles 4 Slide stroke 800 mm Drilling area in steel St-60 Full drilling dia. 15 mm Boring dia. 20 mm Drilling method Single-lip drill
VR 4A/1250 Producer Mas Max. drilling diameter 50 mm Max. vertical arm adjustment 750 mm Taper in spindle 4 Morse Main motor output 4 kW Dimensions l x w x h 2250x1055x2970 mm Machine weight 2700 kg
ID3598 Geotec Rotomax L year/Baujahr 2012 Crawler drilling rig, drilling mast stroke length 4300 mm, pulling force 46.5 kN, contact pressure 25 kN, mast telescopic travel 500 mm, gearbox flushing passage 100 mm - 5 gears, clamping head diameter 178 mm, clamping and breaking device 0-400 mm, shock tongs, support clamp 50-324 mm diameter, cable winch, centrifugal pump, mast extension 810 mm Crawler drilling rig, drilling mast stroke length 4300 mm, tractive force 46.5 KN, pressure 25 kN, mast telescopic travel 500 mm, gearbox flushing passage 100 mm - 5 gears, clamping head diameter 178 mm, clamping and breaking device 0-400 mm, shocking pliers, interceptor clamp 50-324 mm diameter, winch, centrifugal pump, mast extension 810 mm
MIKROMAT Model / type:BKoE 630x1000 Technical data: > Mikromat BKoE 630 x 1000 > table clamping surface 1000 x 630 mm > longitudinal travel of the table 710 mm > cross travel of the table 700 mm > travel of headstock 630 mm > spindle stroke 200 mm > distance between spindle nose and table 20-850 mm
Continuous drilling capacity: 25 mm Normal drilling capacity: 30 mm Thread cutting power: M 16 Spindle: MK 3 Drilling depth: 135 mm Spindle speeds infinitely variable: 150 - 3000 rpm Table size: 460 x 360 mm Weight: 225 kg Mains connection: 400 volts, 50 Hz Facilities: - Thread cutting device - Digital display for speed as standard - Coolant device - LED machine light - Stepless speed adjustment - 24 V Electric - Base plate with T-slots - Drilling table adjustable via rack and worm gear and swivelled around column - Emergency-off-strike button - Motor full protection - Star handle - CE compliant
BKOZ 900x1400 spindle taper MK IV sleeve stroke 250mm table size 900x1400mm longitudinal 1000mm cross 750mm vertical movement by the head of main spindle 600mm spindle speeds 28-1400 Upm spindle feeds 0,02-0,8mm/U scales wreaths for all directions of motion hydr. clamping system coolant system sep. control cabinet Motor: 230/380V 50HZ 8KW dimensions base: 3.300 x 2.400mm height: 2.500mm weight: 7.500 kg
Radial Drilling Machine OOYA RE 1000 Radial Drilling Machine for Sale in Excellent Condition Manufacturer: OOYA Machinery Works Co. Ltd "JAPAN" Type: RE-1000A Speed range 50% 12 Segments 32-1655 r/min (50 Hz) Projection 1000 mm Spindle holder MK 4 Drilling capacity in steel (diameter): 35 mm Drilling capacity in cast iron (diameter): 40 mm Arm vertical travel distance: 650mm Spindle diameter: 60 mm Column diameter: 320 mm Clamp base plate: 1020x650mm Clamping block: 450 x 650 x 500 mm ca Spindle diameter: 60 mm Column diameter: 320 mm Power: 3 x 200v 50Hz (Japanese voltage standard) Main motor: 2.2 kW Arm lift motor: 1kw Coolant pump motor: 50 watts Weight: 2.5 t Space requirement approx. 2.1 x 1.16 x 3 m
Fitting drill Ganner L x W x H: 1.20 x 0.80 x 1.40 m + stops Weight approx. 400 kg Built in 1987 The machine is in good condition, ready for operation. Changes, errors, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
GeneralCNC Turning Centre with C axis and tool drive; Control: CELOS with Siemens 840D sl Operate Work spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmWorking areaSwing diameter over guide ways700 mmTurning diameter410 mmTransverse stroke300 mmLongitudinal stroke850 mmClamping chuck diameter max.315 mmMax. Turning Length800 mmBar diameter max.65 mmMain drive 1Drive power (100% DC)33 kWSpeed range20 - 4000 rpmTorque (100% DC)580 NmC-Axis Speed-200 rpmTorque of C-Axis (holding torque)225 NmAccuracy at point stopping0,01 degreeTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-4000 rpmPower max. (40% DC)11,3 kWFloor space/WeightDimensions (L x W x H)3,99 x 2,69 x 1,99 mWeight approx.6500 KgTechnologie cycle alternating speedTechnology cycle for the ...
KOTEC PSD-4520 CNC drilling machine was built in 2020 in South Korea by KOTEC Co., Ltd. The machine, which is designed for drilling precision holes and threading, is an excellent choice for companies specialising in, among others, the construction of machinery or the production of steel structures. The machining process is performed in three axes (X,Y,Z) on a large work area with a length of 4500 mm and a width of 2000 mm. A number of state-of-the-art components, combined with an extremely stable design, guarantee the best results, even during the most intensive machining. All this is complemented by an advanced CNC control with an intuitive interface and all the necessary functions. The KOTEC PSD 4520 CNC beam drilling machine weighs approximately 8900 kg. Technical specifications of the KOTEC PSD-4520 CNC metal drilling machine - number of axes: 3 (X,Y,Z) - feed in the X/Y axis: 4 ...
Drill diameter: 2 - 13 mm Tip angle: 90° - 140° Speed: 4800 rpm Connection: 230 V Engine power: 0.18 kW Weight, approx.: 11 kg Dimensions, approx.: 320 x 180 x 190 cm Characteristics: - Ideal for grinding HSS/hard metal spiral drills - Safe operation due to forced grinding - Peak angle adjustable from 90° - 140° - Compact design, with collet storage in the machine and handle for quick storage - Including sharpening device to reduce feed force - Device for back grinding of the drill cuttings to reduce the friction between the drill and the workpiece - Rotor with precision ball bearings Delivery: - Grinding wheel CBN - 11 collet pliers ER 20, 3 - 13 mm - collet holder ER 20
Drill diameter: 13 - 32 mm Tip angle: 90° - 140° Speed: 4800 rpm Connection: 230 V Engine power: 0.25 kW Weight, approx.: 28 kg Dimensions, approx.: 490 x 250 x 260 mm Characteristics: - Ideal for grinding HSS/hard metal spiral drills - Safe operation due to forced grinding - Peak angle adjustable from 90° - 140° - Compact design, with collet storage in the machine and handle for quick storage - Including sharpening device to reduce feed force - Device for back grinding of the drill cuttings to reduce the friction between the drill and the workpiece - Rotor with precision ball bearings Delivery: - Grinding wheel CBN - 20 collet pliers ER 40, 13 - 32 mm - collet holder ER 40 Optional extension, at extra cost: - collet set 5pcs. 8.0 / 9.0 / 10.0 /11.0 /12.0 mm
Drilling capacity max.: 30 mm Thread cutting: M 14 Tool rear ham: MK 3 Spindle speeds, infinitely variable: 150 - 2500 rpm Extension: 265 mm Drilling depth: 150 mm Pinole feed: 0.05 / 0.1 / 0.2 mm/U Column diameter: 92 mm Table size / T-slot size: 500 x 400 mm / 14 mm Engine power: 1.5 kW Machine dimensions (W x D x H): 640 x 850 x 1850 mm Weight approx.: 265 kg Characteristics: - Vario drive for infinitely variable adjustment of the desired speed - Pinole delivery either by hand or by mechanical feed - Set speed by means of digital display quickly and easily readable - Stable casting table with T-slots and coolant gutter - Adjustable drilling depth stop, drilling depth can be read by scale - Thread cutting device - CE / IEC, German documentation and German service Delivery: - Quick-clamp chuck 1 - 16 mm / B 18 - Drill chuck mandrel MK 3 / B 18 - Coolant dev ...
Drilling capacity max.: 35 mm Thread cutting: M 24 Tool rear ham: MK 4 Spindle speeds, infinitely variable: 65 - 2000 rpm Extension: 265 mm Drilling depth: 150 mm Pinole feed: 0.05 / 0.1 / 0.2 mm/U Column diameter: 115 mm Table size / T groove size: 685 x 485 mm / 14 mm Engine power: 1.5 kW Machine dimensions (W x D x H): 950 x 580 x 2000 mm Weight approx.: 385 kg Characteristics: - Vario drive for infinitely variable adjustment of the desired speed - Pinole delivery either by hand or by mechanical feed - Set speed by means of digital display quickly and easily readable - Stable casting table with T-slots and coolant gutter - Adjustable drilling depth stop, drilling depth can be read by scale - Thread cutting device - Gearbox pre-bed - CE / IEC, German Documentation and German Service Delivery: - Table clamping and height adjustment from the front - Quick-clam ...
The VT1250 is a double-sided glass drilling machine from Bavelloni , designed for precision and durability in the glass processing industry. Here are the key specifications and features: ⚙️Technical Specifications VT1250 Machine type : Double-sided glass drilling machine (top and bottom) Maximum glass thickness : Up to 25 mm Maximum drill diameter : 130 mm Range (X-axis) : 1250 mm Machine dimensions : Length: approx. 2200 mm Width: approx. 1000 mm Height: approx. 1900 mm Transport dimensions: 2.5 x 2.2 x 1.9 m Year of manufacture : Varies per model (for example 1995 for reconditioned models) Extras : Equipped with laser for positioning Double-sided drill heads (top and bottom) Automatic programming of drill heads based on glass thickness Air-controlled rack for glass positioning Why popular? Reliability : Used worldwide by glass companies because of its robust ...
Type: MZ73031A Number of spindles 3 Distance between first and last spindle 50 mm Adjustable drilling speed Height of the working table 820 mm Table dimensions 735×440 mm Number of clamps 2 Motor power 1,5 kW 400 V Motor r.p.m. 2800 r.p.m Working air pressure 6-8 bar Weight 75 kg Transporting dimensions 900x700x1500 mm
Continuous/normal drilling power (mm) R1 (gemes. Drehmom. Nm) 30/35 (in E3335/ST60) (135) R2 (gemes. Drehmom. Nm) 27/32 (in E335/ST60) (90) Thread cutting performance max. (slope-dependent) R1 M30x3.5 R2 M24x3 Spindle MK IV Drilling depth (mm) 160 Extension (mm) 300 Column diameter (mm) 140 Usable table area (W x D) (mm) 590 x 450 Speed display digital Drilling depth display digital Drilling depth stop with fine adjustment Table height adjustment with rack Spindle/table (mm) 150-700 Machine dimensions without VP (mm) 610 x 900 x 1,980 mm Machine dimensions with VP (mm) 670 x 1,100 x 2,200 mm Motor rotary current 400V with frequency inverter (kW) 4.0 Spindle speeds infinitely variable R1 (1-stage) 0-1000 rpm R2 (1-stage) 0-1600 rpm Feed by hand Weight (kg) 400 Optional (780 EUR) drilling package 5,beststretched from: Vice [felix] 125 Cone mandrel MK III/B ...
Table drilling unit W 100 A Manufacturer: TOS Varnsdorf overhauled: 20125 Spindle diameter ... 100mm Axis X ... 1600mm Axis Y ... 1120mm Spindle speed ... 7-1120 rpm. Axis W ... 900mm Axis Z ... 1250mm ISO 50 Max table load ... 3000kg L x W x H ... 6710 x 3450 x 3000mm Machine weight ... 14000kg Main Engine Power... 11kW Total power demand ... 17kVA Clamping table area ... 1250 x 1250mm Flat disc diameter... 600mm Max circulation diameter ... 900mm The machine is possible to test under electricity, with one-year warranty.
Woelfel B100/S used machine Spindle dia 125mm MK 6 Ram dia 165 mm with stroke 200 mm Spindle speed in 24 steps from 30 - 1200 rpm Vert. travel of headstock 1250 mm Bed clamping surface 870 x 700 mm Additional table 710 x 560mm height 500 mm Height between bed and spindle nose 1460 mm
CATALOG NUMBER M0252 PRODUCT FEATURES The main features of the machine: - Single-head drilling machine for drilling in the range of 0 - 90 ° - Pivoting angle of the head adjusted pneumatically - Possibility to set lateral supports with an accuracy of 0.1 mm - Safety holders allow quick adjustment of panels without adjustment - Spindles adapted for quick couplers - Patented pneumatic clamps of the material - MDF work table - Quick and accurate adjustment - Precise drilling - Italian production Standard equipment of the machine: - 2 aluminum rulers with a length of 1.5 m (right and left) with four stopwatches - 5 quick connectors - Wooden box securing the machine in transport. ADVANTAGES - vertical / horizontal / angled drilling - multi-spindle - new machine - CE certificate - solid - professional TECHNICAL DATA - number of spindles 23 - dista ...
ID3679 Atlas Copco Mustang A66 CBT-HD year/Baujahr 2000 approx. 16.310 hours/hours 15 t Drilling rig, carriage BMI 6.7 (length 8750 mm, travel 6700 mm), drill head S1300, engine Deutz BF4M1013, diesel engine replaced at 10200 hours, hydraulic pump is new (drive wheel still needs replacing), generally good condition, regularly serviced (service records available) Drilling rig, mount BMI 6.7 (length 8750 mm, 6700 mm travel), drill head S1300, engine Deutz BF4M1013, at 10200 hours the diesel engine was renewed, hydraulic pump is new (drive wheel still needs to be replaced), generally good condition, service has always been done (service certificates are available)
20-90-542 Multeosill Drilling Machine WOODLAND MACHINERY (new) Type: BM21S Number of shafts 21 Adjustable drilling angle Working width 700 mm Table Dimensions 1000 × 900 mm Additional support Ruler 3000 mm Number of Pressers 2 Engine power 1.5 kW 380 V 50 Hz Required Air Pressure 8 bar Drilling Step 32 mm Weight 150 kg Transport Dimensions 1200x1000x1300 mm
attention! To participate in this auction, a deposit of € 25 is required, which will be withheld until the outcome of the contradictory verification of the state of the places and the prior deposition of safety documentation that can be consulted after the signing of an NDA. The deposit is to be paid by bank transfer to the current account in the name of Surplex Srl. To request further information: m.tosin@tbauctions.com Lot consisting of various construction equipment, including DEWALT hammer drill, HILTI hose, HILTI rotary hammer, various pallet trucks. The list drawn up by the expert is attached to this announcement. The lot includes the following works that must be carried out in this time order no later than 30 days from the award. The total removal of the goods and correct disposal of the remaining NON-FERROUS materials after removal. The complete floor cleaning of the re ...
The machine is completely overhauled and is then as good as new! The machine gets a completely new electric satisam with our control system. Technical specifications Drilling process: ELB Number of drilling spindles: 1 Min. Drilling diameter 4 mm Max. Drilling diameter 30 mm Max. Drilling depth 600 mm with drilling diameter 4mm / with larger drilling diameters max. Drilling depth 1000 mm Max. Rapid traverse speed X + Z axis 4000 mm / min Max. Rapid traverse speed y-axis 2000 mm Travels X-axis horizontal approx. 700 mm Y-axis vertical approx. 300 mm Z axis designed for max. Drilling depth 1000 mm
ERD Column Drill Type B35/40 -Manufacturer Ing. Ewald Riens, Junior, Bodenburg via Hildesheim -Machine type ERD B35/40 -Column drilling machine design with gear drive -Drilling performance in steel up to 50 mm -Spindle holder MK 4 (Morse taper 4) -Quill stroke 190 mm -Projection (spindle to column) 325 mm -Column diameter 140 mm -Table size approx. 565 × 565 mm -Table adjustment height-adjustable, rotatable (360°) -Speeds (spindle) 6-stage, manual via belt / lever - 670 / 470 / 295 / 210 / 150 / 90 rpm -Note on speed switching: Switching only in the outlet -Feed types: Manual and automatic feed -Feed speeds 0.1 / 0.2 / 0.3 mm per spindle revolution (switchable during the run) -Motor power 2.2 kW (three-phase current) -Supply voltage 400 V -Cutting speed table SS drill for material ST60 available (operating note) Dimensions: LxWxH: 0.9x0.5x2.05 meters / Weight 800 ...
Center of spindle to column bus: 1610~350 mm Max. drilling Ø: 70 mm Spindle end to base work surface: 220 - 1050 mm Spindle stroke: 320 mm Spindle rotation: 30 - 37,5 - 47,5 - 60 - 75 - 95 - 118 - 150 - 190 - 235 - 300 - 375 - 475 - 600 - 750 - 950 - 1180 - 1500 - 1700 rpm Power: 4 kW
distance between spindle and coloumn 1600mm max drilling diameter 50mm machine in good conditions cube included
ID3737 Nordmeyer on Unimog Well drilling rig, Nordmeyer? on Unimog, single-stage pump, equipment overhauled in the last 3 years for approx. €40,000 (power swivel, hydraulic pumps, main gearbox for engine overhauled, new flushing pump), everything works, drilled with it so far: 100 m depth - 152 mm, 60 m depth - 325 mm Well drilling rig, Nordmeyer? on Unimog, single-stage pump, equipment overhauled the last 3 years for about 40,000 euros (power turntable, hydraulic pumps, main gearbox for engine overhauled, new mud pump), everything works, drilled with it so far: 100 m depth - 152 mm, 60 m depth - 325 mm
BIESSE - Multi-spindle drilling machine Model BEAVER Year 1982 Manufacture Biesse S.p.A Italy S/N 312/82 Technical data 1 horizontal drilling unit, 21 spindles 2 vertical drilling units, 2x10 spindles, pitch 32 mm horizontal Drilling motor 2.2 kW Vertical drill motor 2 x 1.5 kW Spindle speed 2800 rpm Blade dimensions 10x1.5 mm Operating pressure 0> 6 MPa 7 pcs. pneumatic answers with kSsi control levers Weight 865 kg L x W X H 280cm x 150cm x 150cm
In-line drilling rigs with 8 pieces of drilling spindles for the processing of easily machinable materials such as wood - aluminium - non-ferrous metals, composite materials and various plastics. Each of the drilling units produces 450 watts. Infinitely adjustable drilling feed speed Infinitely adjustable drilling depth and return path of the drilling unit. Slanted holes in the range +/- 30°. Pneumatic workpiece tension Table size 3,000 x 800 mm (optionally larger) Working height approx. 870 mm. Horizontal adjustment of the drilling units 240 mm. Vertical adjustment of the drilling units 320 mm. Dimensions 3 x 1.25 x H 1.98 m Weight approx. 1,000 kg
In-line drilling rigs with 8 pieces of drilling spindles for the processing of easily machinable materials such as wood - aluminium - non-ferrous metals, composite materials and various plastics. Each of the drilling units produces 450 watts. Infinitely adjustable drilling feed speed Infinitely adjustable drilling depth and return path of the drilling unit. Slanted holes in the range +/- 30°. Pneumatic workpiece tension Table size 3,000 x 800 mm (optionally larger) Working height approx. 870 mm. Horizontal adjustment of the drilling units 240 mm. Vertical adjustment of the drilling units 320 mm. Dimensions 3 x 1.25 x H 1.98 m Weight approx. 1,000 kg
Kramatorsk KJ 1910 10-meter boring depth - Heavy duty: 25-ton workpiece >>> NOTE: MACHINE IS IN OUR WAREHOUSE IN ITALY < < < Heavy duty: Max. work-piece weight 25 tons Spindle motor kW 85 Counter rotation motor 90kW Spindle hole diameter mm 700 Max. boring diameter, mm 600 Center height over the bed, mm 670 Max. work piece external diameter, mm 1300 Work piece length range on one-sided machining, mm 1000...10000 Work piece diameter range, mm: - in chuck of faceplate 200...1100 - in open rest 400...900 - in closed rest 200...630 - in round rest 250...550 Spindle speeds range, rpm 2...200 Machine overall dimensions, approx mtrs 31 x 3 x 2,3 Machine weight, kg 90000 (approx)
Radial drill Soraluce TR3-2500mm. 2500mm arm. Drilling in steel: 80mm. Drilling in cast iron: 100mm. Chuck spindle diameter: 110mm. Cone Morse 6. Speeds: 16 (20-1475rpm). Engine power: 10hp.
Modern, precise production column drilling machine according to proven UNIMAX 3 concept with infinitely variable feed drive, automatic tool ejector and standard chip breakage control. The digital display displays feed, speed and drilling depth. Turn switch Right/Left Run. Emergency-off-stroke button. Motor protection. Pre-configured machine with optional equipment thread cutting device, free cutting function and LED lamp. Normal drilling capacity in E 335: 30 mm Thread cutting power: M 20 Spindle: MK 3 Feed infinitely adjustable in the range: 30 - 400 mm/min Drilling depth programmable: 125 mm Extension: 260 mm Distance spindle/table: 90 to 840 mm Table area: 500 x 365 mm Column diameter: 110 mm Total height: 1,900 mm Weight: 280 kg Motor can be switched on pole: 0.8/1.5 kW Spindle speeds infinitely variable Drilling Range A: 80 - 1,440 rpm Drilling Range B: 180 - ...
Number of rows: 4 0 distance between row: 75 cm Working with: 3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
250 € 
