140,789 used machines on RESALE, but how to find them? Machine Search
bore capacity in steel (diameter): 40 mm bore stroke: 190 mm turning speeds: 50-1800 U/min Short spindle: MK 4 Table dimensions: 500x400 mm total power requirement: 2,2 kW weight of the machine ca.: 330 kg dimensions of the machine ca.: 670 x 500 x 2120 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Spindle Speed: 80-3200 U/min. : 30 mm : 25 mm table surface area: 500x365 mm bore depth: 125 mm throat: 260 mm : MK 3 distance spindle /table: 90-840 mm T-slot - width: 14 mm column diameter: 110 mm weight of the machine ca.: 270 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 50 mm bore capacity in cast iron: 56 mm : 50 mm : M 30 : M36 : MK 4 throat: 300 mm : 615x430 mm : 70-4000 U/min. : 2x14x224 mm Distance spindle/table max.: 147/688 mm column diameter: 145 mm spindle stroke: 160 mm feeds: 0,1-0,4 mm/U height of the machine: 1885 mm drive motor: 1,8/2,9 kW weight of the machine ca.: 530 kg Standard equipment: - Electromagnetic feed clutch with overload protection and electrical Cross Handle Switches - Control and light transformer - Main switch lockable - Mushroom pushbutton (latching) for EMERGENCY STOP in the front panel - Clockwise rotation by contactor control - Speed adjustment stepless - Speed display digital - Speed setting electrically - Protection IP 54 - Motor insulation class F - Spindle protection with electrical protection Pos. 12 LED machine lamp with radially adjustable light beam, supply voltage 24 Volt, protection class IP 65 Pos. 20.1 T ...
: 30 mm : M 16 : M 20 : MK 3 : 225 - 4300 U/min. spindle stroke: 140 mm throat: 293 mm column diameter: 115 mm : 514 x 360 mm : 2 x 14 x 224 mm : 132 / 724 mm feed: Hand 0: stufenlos total power requirement: 1,0 / 1,6 kW Standard equipment: - Motor protection switch - Reversing switch for clockwise and anti-clockwise rotation - Speed adjustment stepless - Protection IP 54 - Mushroom pushbutton (latching) for EMERGENCY STOP - Spindle protection with electrical protection - Speed display digital - Connector (fully assembled, cable length 2 m) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 12 mm : M12 mm : 30 mm : M 16 : M 20 : MK 3 : 225 - 4300 U/min. spindle stroke: 140 mm throat: 293 mm column diameter: 115 mm : 514 x 360 mm : 2 x 14 x 224 mm : 132 / 724 mm feed: Hand 0: stufenlos total power requirement: 1,0 / 1,6 kW weight of the machine ca.: 260 kg Standard equipment: - Motor protection switch - Reversing switch for clockwise and anti-clockwise rotation - Speed adjustment stepless - Protection IP 54 - Mushroom pushbutton (latching) for EMERGENCY STOP - Spindle protection with electrical protection - Speed display digital - Connector (fully assembled, cable length 2 m) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 60 mm Center of spindle to wall or column: min./max. 320 - 160 mm spindle turning speed range: 20 - 2.500 U/min quill stroke: 310 mm total power requirement: 4 kW weight of the machine ca.: 4.500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 40 mm : M 24 : M 30 spindle turning speed - stepless: 160-2.250 U/min : MK 3 spindle stroke: 120 mm throat: 293 mm column diameter: 115 mm : 515x360 mm distance spindle /table: min./max. 117/701 mm : 2 x 14 x 224 mm feed: 0,1 + 0,2 mm/U Machine height: 1840 mm weight: 270 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 16 mm : M 12 : MK 2 : 100-2.000 U/min. spindle stroke: 80 mm throat: 190 mm column diameter: 65 mm : 300x240 mm : 2 x 12 x 80 mm : 75/357 mm : 300x240 mm : 2 x 12 x 80 mm : 437/437 mm feed: von Hand : Handkurbel Machine height: 825 mm total power requirement: 0,7 kW weight: 83 kg Standard equipment: 5 TFT LCD display with touch function: Manual input of spindle speed setpoint, speed display actual value, integrated drilling depth display with touch function. setpoint, actual speed display, integrated drilling depth display with touch zero point transfer, virtual drilling depth scale in the display, machine status status indicators and warnings on the display, Service information, Selectable operator language operator language: DE/EN/FR/ES/IT/NL/RU. - AC motor 230 Volt, 50 Hz - Connection plug ready fitted, cable length 3 m - Infinitely variable speed adjustment via potentiometer - Thre ...
: 14 mm : M 10 : MK 2 : 230-4.000 U/min. spindle stroke: 80 mm throat: 190 mm column diameter: 65 mm : 300x240 mm : 2 x 12 x 80 mm : 75/357 mm : 300x240 mm : 2 x 12 x 80 mm : 437/437 mm feed: von Hand : Handkurbel Machine height: 825 mm total power requirement: 0,7 kW weight: 83 kg Standard equipment: 5 TFT LCD display with touch function: Manual input of spindle speed setpoint setpoint, actual speed display, integrated drilling depth display with touch zero point transfer, virtual drilling depth scale in the display, machine status status indicators and warnings on the display, Service information, Selectable operator language operator language: DE/EN/FR/ES/IT/NL/RU. - AC motor 230 Volt, 50 Hz - Connection plug ready fitted, cable length 3 m - Infinitely variable speed adjustment via potentiometer - Three separate buttons for clockwise rotation - anticlockwise rotation - stop (spindle ...
: 40 mm threading in St 60: M24 threading in GG 20: M30 Short spindle: MK 3 Center of spindle to wall or column: 293 mm spindle turning speed - stepless: 160 - 2250 U/min Column diameter: 115 mm spindle stroke: 120 mm Machine table - usable table surface: 514 x 360 mm T-Slots Amount - Width - Distance: 2 x 14 x 224 mm Distance spindle-table min.: 117/701 mm feed: 0,10 + 0,20 mm/U Motor output: 1,45 / 1,9 kW height of the machine: ca. 1840 mm weight of the machine ca.: 285 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 25 mm throat: 210 mm : total power requirement: kW weight of the machine ca.: 0.085 t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
: throat: mm bore capacity in steel (diameter): 35 mm tool taper: MK4 0 bore spindle turning speed range: 1400 U/min feed range: 0.04-0.40 mm/min total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: 110 mm x-travel: 2500 mm y-travel: 1600 mm total power requirement: 30 kW weight of the machine ca.: 22 t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 55 mm arm length: 2500 mm workpiece height max.: - mm total power requirement: 8 kW weight of the machine ca.: 5 t dimensions of the machine ca.: 4 x 1 x 3 m Radial drilling machine MK 5 Spindle holder MK 5 Speed range 30 - 1500 min-1 Feed rates 0.05 - 0.6 mm/rev Space requirement approx. 3.7 x 1 x 3 m Weight approx. 5 tonnes (estimated) Working range: MK 5 x 2500 Drive: 3.7 / 6 Sonderpreis 2.900,-- EXW / ab Fundament - Selbstabbau Listenpreis 4.900,-- frei LKW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 4 / 6 mm turning speeds: 650 - 12.000 U/min table surface area: 180 160 mm spindle cone: B 10 bore stroke: 50 mm total power requirement: ? kW weight of the machine ca.: 50 kg dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle cone: MK 1 turning speeds: 200 - 3000 U/min table-size: 300 x 220 mm total power requirement: 520 W weight of the machine ca.: 200 kg dimensions of the machine ca.: 8004001800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 30.0 mm throat: 293 mm bore stroke: 140 mm morse taper: 3 MK table:: 515 x 360 mm turning speeds: 225 - 4300 U/min column diameter: 115 mm distance spindle /table: 132 / 724 mm engine output: 1.0 / 1.6 kW weight: 260 kg Machine height: 1790 mm NEW ALZMETALL MODEL RANGE 7 TFT - LCD display with touch function: Spindle speed setpoint Actual speed display Integrated drilling depth display with touch zero point transfer Virtual drilling depth scale in the display Machine status displays and warnings in the display Service information Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Infinitely variable speed setting by means of an adjusting lever - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - counterclockwise rotation - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - ...
bore capacity in steel (diameter): 40.0 mm throat: 293 mm bore stroke: 120 mm morse taper: 3 MK table:: 515 x 360 mm turning speeds: 160 - 2250 U/min column diameter: 115 mm feed: 0.10 + 0.20 mm/U T-slots: 2 x 14 x 224 mm distance spindle /table: 117 / 701 mm engine output: 1.45 / 1.90 kW weight: 285 kg Machine height: 1840 mm NEW ALZMETALL MODEL RANGE 7 TFT - LCD display with touch function: Spindle speed setpoint Actual speed display Integrated drilling depth display with touch zero point transfer Virtual drilling depth scale in the display Machine status displays and warnings in the display Service information Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Infinitely variable speed setting by means of an adjusting lever - automatic spindle feed with feed overload protection - Spindle protection with electrical fuse - Three separate buttons for cloc ...
bore capacity in steel (diameter): 36.0 mm bore capacity in cast iron: 45.0 mm throat: 300 mm bore stroke: 160 mm : 4 speeds: 120-900 / 240 - 1780 U/min column diameter: 145 mm table-size: 615 x 460 mm feed: 0.1 / 0.2 / 0.3 / 0.4 mm/U total power requirement: 1.75 / 2.5 kW weight: 440 kg dimensions: 1200 x 800 x 2300 mm well-maintained condition () current new price approx. 18.000 Euro special price on request Equipment: - robust pillar drill (V-belt) - electromagnetic feed clutch = spindle feed with overload protection and electrical handle cross circuit - mushroom pushbutton (latching) for EMERGENCY STOP, in the front panel - electric stepless speed adjustment - Digital speed display - clockwise rotation of the drill spindle - pole-changing drive motor - Infinitely adjustable drilling depth stop - Work table with 2x T-slots - height-adjustable - Operating instructions in German T ...
bore capacity in steel (diameter): 30 mm throat: 254 mm bore stroke: 120 mm : 4 Motor output: 9 speeds: 120 - 1810 U/min column diameter: 92 mm table surface area: 475 x 425 mm total power requirement: 1,1 kW dimensions: 915 x 450 x 1705 mm weight: ca. 135 kg Column drilling machine OPTIdrill DP 33V promotion set / 3020680SET With an electronically controllable drive in a modern design Industrial engine Quiet running spindle thanks to new spindle design Machine operation with safety electronics in 24 V direct current Guaranteed concentricity = 0.02 mm in the measured drilling spindle Clockwise/counterclockwise rotation Precision spindle bore Control panel with user-friendly, dirt and water resistant Membrane keyboard RPM display Separate emergency stop button Tapping function Precisely crafted, stable drill table with diagonal T-slots with all-round cooling water channel, can ...
bore capacity in steel (diameter): 30 mm throat: 270 mm bore stroke: 125 mm : 4 Motor output: 9 speeds: 70 - 2800 U/min Column drilling machine OPTIdrill DP 33V promotion set / 3020680SET With an electronically controllable drive in a modern design Industrial engine Quiet running spindle thanks to new spindle design Machine operation with safety electronics in 24 V direct current Guaranteed concentricity = 0.02 mm in the measured drilling spindle Clockwise/counterclockwise rotation Precision spindle bore Control panel with user-friendly, dirt and water resistant Membrane keyboard RPM display Separate emergency stop button Tapping function Precisely crafted, stable drill table with diagonal T-slots with all-round cooling water channel, can be tilted sideways by ±45° and rotated by 360° Drilling depth stop LED machine light integrated in the drill head V-belt cover with s ...
bore capacity in steel (diameter): 40.0 mm bore capacity in cast iron: 45.0 mm throat: 300 mm bore stroke: 160 mm morse taper: 4 MK table:: 615 x 430 mm turning speeds: 100 - 1800 U/min column diameter: 145 mm thread: M 24 ST60 thread: M 30 GG20 feed: 0.1-0.2-0.3-0.4 mm/U distance spindle /table: 138 / 688 mm engine output: 1.4 / 2.2 kW weight: 470 kg Machine height: 1865 mm NEW ALZMETALL MODEL RANGE 7 TFT - LCD display with touch function: Spindle speed setpoint Actual speed display Integrated drilling depth display with touch zero point transfer Virtual drilling depth scale in the display Machine status displays and warnings in the display Service information Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Thread cutting device for thread cutting with a stop max. 6 threads / min (thread cutting performance depends on the spindle speed) Thread dept ...
bore capacity in steel (diameter): 32 mm throat: 300 mm bore stroke: 160 mm morse taper: 4 MK table:: 460 x 460 mm turning speeds: 75 - 3200 U/min engine output: 1,5 kW column diameter: 125 mm thread: M16 ST60 feed: 0,10/0,18/0,26 mm/U dimensions: 800 x 500 x 2200 mm weight: 350 kg - automatic drill feeds (magnetic clutch) - Height adjustable and angle adjustable table - Movable work table - Integrated cooling system - Powerful engine - 3 hand levers for drilling feed - Safety shield with limit switch - Separate emergency stop - Built-in working lights - Incl. drill chuck 16mm - B16 - Built-in automatic thread cutting. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 40.0 mm throat: 293 mm bore stroke: 140 mm morse taper: 3 Kurzspindel MK table:: 420 x 350 mm turning speeds: 160 - 2250 U/min column diameter: 115 mm throat: 293 mm distance spindle /table: min 117 / max 701 mm T-slots: 2 x 14 x 224 total power requirement: 1.45 / 1.90 kW weight: 370 kg dimensions of the machine ca.: 1200 x 800 x 1840 mm Current list price ~ 12.500 euros Special price available upon request Features: - Sturdy column drill press (V-belt) - stepless speed adjustment - pole-changing drive motor - height-adjustable worktable with 2 T-slots - R/L rotation of the drill spindle (reversing switch) - Main switch with motor protection switch - Mushroom-head pushbutton (latching) for EMERGENCY STOP - Operating instructions (PDF) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 32 mm throat: 280 mm bore stroke: 110 mm spindle taper MT: 3 table-size: 340 x 400 mm turning speeds: 210- 2600 U/min total power requirement: 1,8 kW weight of the machine ca.: 325 kg dimensions of the machine ca.: 950 x 450 x 1750 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 50 mm bore capacity in cast iron (diameter): 60 mm threading cutting capacity:: M42 throat: 360 mm bore stroke: 200 mm spindle taper: MK 4 feed range - spindle: 0,1-0,2-0,3-0,4 mm/U spindle turning speed range: 190 - 1900 U/min column diameter: 175 mm table surface area: 550 x 550 mm total power requirement: 4 kW weight of the machine ca.: 0,85 t dimensions of the machine ca.: 2,2 x 0,7 x 1,3 m - large stepless speed range in 3 stages - mechanical speed adjustment with hand lever (model V) - electronic speed adjustment with frequency converter (model VE) - Front digital speed display - Gear lubrication by automatic oil pump VE” - Machine base plate with integrated coolant device - Machine light - MGI rotating and tilting table - Advance and automatic retraction with electromagnetic clutch - Front hand wheel for fine adjustment of the manual feed - Sca ...
bore capacity in steel (diameter): 40 / 23 mm throat: 320 mm bore stroke: 180 mm : 4 speeds: 30 - 765 U/min table-size: 720 x 550 mm weight: 480 kg dimensions: 750 x 900 x 1900 mm Equipment: - Multi-spindle head, drill Ø 23 mm - automatic feed - coolant device - infinitely variable speed - adjustable drilling depth stop The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
drill diameter: 2.0 - 20.0 mm lip angle: 90 - 135 ° turning speeds: 4800 U/min voltage: 230 Volt engine output: 0.12 kW weight: 8.6 kg range L-W-H: 285 x 130 x 170 mm The handy DG 20 M drill grinding machine is ideal for grinding twist drills made of HSS, cobalt and hard metal. Thanks to the adjustable tip angle of 90° to 135°, this model can be used universally for 2-edged twist drills. Properties: - For grinding HSS and hard metal twist drills from 2 - 20 mm - ER 20 and ER 25 collets also enable clamping of intermediate sizes - Optimum grinding result thanks to the specially guided collet - Includes device for sharpening the drill tip - Universally adjustable tip angle from 90° - 135° - Fast and easy grinding process Scope of delivery: - CBN grinding wheel - ER 20 collets, 3 - 12 mm 11 pieces (3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 /12 / 13 mm) - ER 25 collets, 14 - 20 mm 7 pieces ...
bore capacity in steel (diameter): 28 mm throat: 250 mm bore stroke: 130 mm morse taper: 3 MK table:: 380 x 380 mm turning speeds: 75 - 3000 U/min engine output: 1,1 kW column diameter: 98 mm thread: M16 ST60 dimensions: 700 x 450 x 1500 mm weight: 200 kg - Height adjustable and angle adjustable table - Movable work table - Prepared for cooling system - Powerful engine - 3 hand levers for drilling feed - Safety shield with limit switch - Separate emergency stop - Built-in working lights - Incl. drill chuck 16mm - B16 - Built-in automatic thread cutting. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 8 Wochen ab Auftragse : Spanien : 12910 € : 247.87 € : 40 mm : MK 4 : 350 mm : 132-194-277-319-466-666-8 U/min : 2.2 kW : M33 : 755 mm : 480 mm : 2280 mm : 490 kg : 0,1 - 0,2 - 0,3 mm/U : 150 mm : 80 - 880 mm : 1225 mm : 480 x 480 mm : 175 mm Automatic feed with mechanical clutch Geared drive Hardened and ground high quality steel gears Speed plate and selecting levers on head front. Depth scale and adjustable depth stop Automatic tool ejector Emergency STOP push button Spindle reversing switch Electric equipment integrated on machine’s head Machined base with coolant tank Worklight MGI: Rotating and tilting table for model 40 Safety drill guard with microswitch CE mark ALTERNATIVE: VERSION BX.40MIT ELEKTROMAGNETIC CLUTCH PRICE ON REQUEST OPTIONS (PRICES ON REQUEST): Electronic speed variato with speed digital reader(VE+TAK) A) 66-211 B) 97-310 C) 138-443 D) 160-510 ...
: neu : 2025 : 030161 : prompt, Zwischenverkauf v : Deutschland : 7350.17 € : 141.86 € : 1 : 23 mm : MK 2 : 260 mm : 20 - 2000 U/min : 1.5 kW : M16x1 : 430 mm : 715 mm : 1800 mm : 290 kg : manuell mm/U : 110 mm : 230 - 850 mm : 420 x 340 mm : 100 mm Drilling capacity / normal drilling capacity 23/25 (in E335/ST60) Manual feed Main switch Tapping attachement Control panel with OLED display Robust, high quality drill head hood with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drill depth stop Stepless speed control via central rotary knob EMERGENCY STOP pushbutton Thermal overload protection Spindle stop Drill protection with electr. Fuse Connection cable with CEE plug OPTIONS: Drill package 3 (vice &, keyless chuck) Coolant device LED lighting with pivot arm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 2 - 4 Wochen ab Auftr : Polen : 1995 € : 25 mm : 19 mm Weldon : 1.6 kW : M20 : 266 mm : 259 mm : 505 mm : 18 kg : 25 mm : 70 mm : 75 mm : 190 mm : 120-190 / 290-450 U/min : 8 mm The PRO-72T drilling machine is suitable for hole cutting and tapping applications. Powerful variable speed motor enables milling capacity up to 70 mm (2-3/4”) and drilling capacity up to 25 mm (1”). Machine’s forward &, reverse work modes allow thread cutting up to M20 with Promotech’s new tapping system. Two speed gearbox with continuous speed adjustment allows to set the optimal speed depending on diameter, steel grade or tool type. Intelligent speed control system maintains constant motor speed regardless of changing loads. Innovative 360-degree LED indicator facilitates proper machine operation and increases work safety. Features and benefits: • powerful motor with heavy duty 2-spe ...
: neu : ca. 8 Wochen ab Auftragse : Spanien : 11530 € : 221.38 € : 40 mm : MK 4 : 300 mm : 75 - 150 - 235 - 325 - 47 U/min : 1.3 kW : Stahl: M 30, Guss: M 32 : 600 mm : 640 mm : 2020 mm : 305 kg : 0,1 — 0,2 — 0,3 mm/U : 160 mm : 125 mm : 420 x 400 mm ERLO (MADE IN SPAIN) FOR DEMANDING WORKSHOP USE geardrive machine 2 aut. feeds left-right drilling drill guard CE norms user manual in GERMAN OPTIONS (PRICES ON REQUEST): lighting equipment coolant equipment and machine base with T-slots Reverse for Tapping The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 2 - 4 Wochen ab Auftr : Deutschland : 7401.09 € : 142.84 € : 20 mm : MK 3 : 260 mm : 30 - 3000 U/min : 1,5 kW : M12 : 430 mm : 715 mm : 1800 mm : 290 kg : 115 mm : 110 mm : 230 - 850 mm : 420 x 340 mm Drilling capacity / normal drilling Performance 20/23 (in E335/ST60) Main switch Thread cutting device Control panel with OLED display Robust, high quality drill head hood with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drill depth stop Stepless speed control via central rotary knob EMERGENCY STOP pushbutton Thermal overload protection Spindle stop Drill protection with electr. Fuse Connection cable with CEE plug 3 years warranty for single shift operation OPTIONS (PRICES ON REQUEST): Drill package 3 (vice &, keyless chuck) Coolant device LED lighting with pivot arm The data for this ad was created with ModulMWS - the software solution of ...
new
: neu : ca. 2 - 4 Wochen ab Auftr : Deutschland : 2292.56 € : 10 mm : B 16 : 220 mm : 250 - 3000 U/min : 0,45 kW : 320 mm : 520 mm : 820 mm : 44 kg : 60 mm : 140 - 315 mm : 300 x 250 mm : 70 mm Drilling capacity / normal drilling Performance 10/12 (in E335/ST60) Robust, high quality and inclined rotation hood for easy speed reading LED lighting Quickly adjustable and ergonomic drill depth stop Stepless speed control via central rotary knob EMERGENCY STOP pushbutton Thermal overload protection Undervoltage release Drill protection with electr. Fuse Connection cable with Schuko plug (1.2 m) 3 years warranty for single shift operation Art. - No. 217.400 with drill head height adjustment OPTIONS: Machine cabinet with door and drawer Drill package 2 (vice &, keyless chuck) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 2 - 4 Wochen ab Auftr : Deutschland : 7519.51 € : 145.13 € : 23 mm : MK 3 : 260 mm : 20 - 2000 U/min : 1,5 kW : M16x1 : 430 mm : 715 mm : 1800 mm : 290 kg : 115 mm : 110 mm : 230 - 850 mm : 420 x 340 mm Drilling capacity / normal drilling Performance 23/25 (in E335/ST60) Main switch Thread cutting device Control panel with OLED display Robust, high quality drill head hood with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drill depth stop Stepless speed control via central rotary knob EMERGENCY STOP pushbutton Thermal overload protection Spindle stop Drill protection with electr. Fuse Connection cable with CEE plug 3 years warranty for single shift operation OPTIONS (PRICES ON REQUEST): Drill package 3 (vice &, keyless chuck) Coolant device LED lighting with pivot arm The data for this ad was created with ModulMWS - the software solution o ...
: neu : ca. 2 - 4 Wochen ab Auftr : Polen : 2595 € : 12 mm : 19 mm Weldon : 0.4 kW : 361 mm : 238 mm : 352 mm : 145 kg : 12 mm : 36 mm : 50 mm : 70 mm : 260 U/min : 6 mm This special design battery-operated drilling machine equipped with permanent magnetic base is dedicated to operate in remote areas, where no power supply is available. The base includes very strong neodymium magnets and does not require any electricity to operate. PRO-36 PM Battery is equipped with LED monitoring system that generates signals in green and red colors to indicate the current status of the drill and provide safety information. The drill can be used with convex (min diameter - 80 mm) and concave (min diameter 1000 mm) materials. Up to 47 holes fi 20 mm in 10 mm thick plate can be made when PRO-36 PM Battery is equipped with CAS LiHD 10.0 Ah battery pack. Features and benefits: • LED interface flashes gr ...
new
: neu : ca. 2 - 4 Wochen ab Auftr : Polen : 1595 € : 23 mm : 19 mm Weldon : 1.6 kW : M20 : 266 mm : 259 mm : 500 mm : 17 kg : 23 mm : 50 mm : 75 mm : 190 mm : 160 - 250 / 390 - 580 U/min : 8 mm The PRO-52T drilling machine is suitable for hole cutting and tapping applications. Powerful variable speed motor enables milling capacity up to 50mm (2”) and drilling capacity up to 23 mm (7/8”). Machine’s forward &, reverse work modes allow thread cutting up to M20 with Promotech’s new tapping system. Two speed gearbox with continuous speed adjustment allows to set the optimal speed depending on diameter, steel gradeor tool quality. Intelligent speed control system maintains constant motor speed regardless of changing loads. Innovative 360-degree LED indicator facilitates proper machine operation and increases work safety. Features and benefits: • powerful motor with heavy duty 2- ...
: neu : 2024 : 3982 : prompt, Zwischenverkauf v : Spanien : 10830 € : 207.94 € : 1 : 35 mm : MK 4 : 300 mm : stufenlos 100 - 2.000 U/min : 3 kW : bis M 27 : 1100 mm : 600 mm : 1950 mm : 360 kg : 0,10 / 0,20 / 0,30 (3) mm/U : 150 mm : 125 mm : 90-890 mm : 1250 mm : 480 x 480 mm ERLO (MADE IN SPAIN) FOR DEMANDING WORKSHOP USE column drilling machine with vario gear 1-stage V-belt drive with stepless variable speed with a frequency converter and digital speed display 3 automatic feeds chuck guard left-right drilling T-Slots and integrated coolant equipment in base stand integrated lighting drill guard HEIGHT ADJUSTABLE, ROTATING AND TILTING TABLE WITH T-SLOTS reverse for tapping fast and precise setting and control of the speed without switching operations and without defined levels more particularly robust parts for wear resistant operation and smooth running compact design with high p ...
spindle diameter: 130 mm x-travel: 4000 mm y-travel: 3000 mm z-travel: 2000 mm w-axis: 800 mm table:: 1800 x 2500 table load: 20 t feed range: 4 - 5000 mm/min spindle turning speed range: 10 - 3000 U/min spindle taper ISO: 50 spindle motor: 37 kW rapid traverse: 10 m/min Control: Heidenhain iTNC 530 total power requirement: 70 kW weight: 39 t range L-W-H: 8,5 x 8,6 x 5,5 mm equipped with - CNC control Heidenhein iTNC 530 & handwheel - 60-fold tool changer (ISO 50) - NC rotary table 1800 x 2500mm, 20t - IKZ and external coolant supply 20bar - chip conveyor - spindle support The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: 100 mm x-travel: 1600 mm y-travel: 1120 mm z-travel: 1250 mm table surface area: 1250 x 1250 mm spindle taper: ISO 50 spindle turning speed range: 7,1 - 1120 U/min faceplate turning speed range: 7,1 - 224 U/min faceplate diameter: 600 mm table load: 4000 kg main drive motor: 11 kW max. travel of spindle: 900 mm total power requirement: 15 kVA weight of the machine ca.: 14,5 t dimensions of the machine ca.: 6 x 3,1 x 3,1 m - DRo Heidenhain - Faceplate with slide The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
core boring: 70-560 mm bore depth: 20000 mm drilling diameter: 70-500 mm core boring capacity in St 60 - reboring: special: 560-1000 mm workpiece diameter: 3200 mm workpiece weight: 200 t faceplate diameter: 2900 mm speed of boring spindle:: 100 - 500 U/min feed range: 3 - 2000 mm/min boring spindle drive: 55 kW spindle head drive: 150 kW workpiece turning speeds: 230 U/min control: Fanuc total power requirement: - kW weight of the machine ca.: - t 2010 Retrofitted equipped with: - Fanuc Control - 4-Jaw Chuck - Oil Pressure Head - Boring Head - Drill Head - 2-Point Rollers Steady Rest (4) - 3 Point Steady Rest (2) - Bar Rest (2) - Coolant & Coolant Piping - Chip Conveyor - Honing Oil Tank & Honing Tool Bars The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
core drilling diameter max.: 56 - 650 mm bore depth: 24000 mm swing diameter: 5800 mm max. workpiece diameter: 3400 mm workpiece length - max.: 24000 mm workpiece weight max.: 380 t speeds: 160 U/min faceplate diameter: 2500 mm control: FANUC 31i-B bore head horizontal movement: max. 25870 mm cutting speed: 0,1 - 1000 mm/min rapid feed: 4000 mm/min main drive: 500 kW bed length x bed width: 53850 x 2500 mm total power requirement: 300 kVA weight of the machine ca.: 700 t dimensions of the machine ca.: 95 x 72 m Deep Hole Drill & Honing Machine (installed 2017) - CNC Control Fanuc 31i-B - BTA Boring - Boring Head (A-Axis) - Pressure table (Z-Axis) - Chip Conveyor - 2 steadies The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 8 Wochen ab Auftragse : Spanien : 7160 € : 138.19 € : 30 mm : MK 3 : 250 mm : 245 - 4000 U/min : M25 : 400 mm : 655 mm : 1185 mm : 280 kg : 120 mm : 100 mm : 85 - 635 mm : 1.195 mm : 300 x 270 mm : 600 x 380 mm ERLO(MADE IN SPAIN) FOR MANUFACTURING USE V-belt drive manual feed left-right drilling automatic tool ejector adjustable depth stop table with T-slots drill guard with micro switch lightening equipment user manual in English or GERMAN CE OPTIONS (PRICES ON REQUEST): Variable speed incl. digital display (VE+TAK) Tapping device (IR/RS) Coolant equipment incl. T-slots in the ground plate (ERB) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 12 - 14 Wochen ab Auf : Spanien : 50410 € : 952.75 € : 35 mm : MK 4 : 390 mm : 94- 2.225 (16) 50 Hz 113 U/min : M35 : 1660 mm : 1510 mm : 2600 mm : 910 kg : 180 mm : 190 - 650 mm : 1310 mm : 125 mm : 400 x 420 mm : 0,10 - 0,18 - 0,24 (3) mm/min : 750 - 1.500 U/min ERLO (MADE IN SPAIN) FOR DEMANDING WORKSHOP USE drilling and milling machine automatic feed precision electromagnetic clutches geared drive cross table fixed base and displaceable headstock control panel cooling equipment with electric motor pump hand wheel for fine tuning clamping device for tools adjustable stop drill guard OPTIONAL EQUIPMENT (PRICES ON REQUEST): Digital read out for drilling depth Tapping device Motorized longitudinal and/or transverse feed Digital read out for table axes and/or drill head height adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oH ...
new
: neu : ca. 2 - 4 Wochen ab Auftr : Deutschland : 1781.01 € : 10 mm : B 16 : 180 mm : 250 - 3000 U/min : 0,45 kW : 400 mm : 248 mm : 460 mm : 30 kg : 50 mm : 105 - 245 mm : 300 x 200 mm : 50 mm Continuous/normal drilling performance 10/12 (in E335/ST60) Manual feed Digital speed display Robust, high quality and inclined rotation hood for easy speed reading LED lighting Quickly adjustable and ergonomic drill depth stop Stepless speed control via central rotary knob EMERGENCY STOP pushbutton Thermal overload protection Undervoltage release Drill protection with electr. Fuse Connection cable with Schuko plug (1.2 m) 3 years warranty for single shift operation OPTIONS: Machine cabinet with door and drawer Drill package 2 (vice &, keyless chuck) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 2 - 4 Wochen ab Auftr : Polen : 595 € : 12 mm : 19 mm Weldon : 0.1 kW : 175 mm : 250 mm : 312 mm : 10 kg : 12 mm : 36 mm : 51 mm : 70 mm : 350 U/min The PRO-36 makes holes up to 36 mm in diameter by using annular cutters. The machine can also drill holes up to 12 mm in diameter by means of twist drill bits with Weldon shank 19mm (3/4’’). Compact design and excellent ratio weight/power make this mag drill a very popular choice for customers. Features &, benefits: • Dual bars guide system ensures extraordinary stiffness and adjustment free operation • Compact size and ultra-lightweight - ideal for site work • Rugged one piece slide and gear box for extra stability • Purpose designed motor with heavy duty gear box • Maintenance-friendly design makes it easy to use • Magnetic Field Shape Control (MFSC) provides maximum holding power on thin materials • Magn ...
ACIERA 24 CNC ist eine CNC-Bohrmaschine für präzise Bearbeitung, mit hoher Genauigkeit und Zuverlässigkeit. Leistung: Bohrleistung Stahl 23 mm; Tisch 820×400 mm; Verfahrwege L 400 mm, Q 320 mm, V 470 mm. Techn.: Spindel 9 Stufen 42 t/min–3500 t/min; Vorschübe 1000 mm/min; Eilgang 3,5 m/min; Anschluss 50 Hz 3x380 V; Leistung 2,5 kW. Erreicht enge Toleranzen; Branchen: Automotive, Uhrmacherei, Maschinenbau, Luftfahrt, Medizintechnik. Technische Daten ohne Gewähr
ID3841 Furukawa HCR1600 ED year/Baujahr 2016 8.945 hours/hours 18.2 t Blast-hole drill rig, CAT C9.3 engine (Tier 4i), 3,565 hammer hours, equipped with compressor, dust collection system, rod carousel, central lubrication system, water injection system, 2D machine-guided GPS system; Ready for operation. Blast hole drilling rig, CAT C9.3 (Tier4i) engine, hammer hours 3,565, with compressor, dust extraction, rod magazine, central lubrication system, water injection system, 2D machine-guided GPS system, ready for use
UTITA AF 15X2 ist eine Tieflochbohrmaschine hoher Präzision, konstruiert für hohe Genauigkeit und Zuverlässigkeit. Arbeitsmöglichkeiten: 2 Bohrspindeln, Bohr-Ø ab 15 mm, Spitzenhöhe 200 mm; Tisch 700×380 mm; Längsweg (X) 400 mm. Technische Hauptdaten: 9 Drehzahlstufen 1.500–12.600 t/min; Anschluss 50 Hz 3×380 V; Leistung 3,2 kW; Abmessungen L3000×B1600×H1800 mm. Erreicht enge Toleranzen; geeignet für Automotive, Luftfahrt, Werkzeugbau und Medizintechnik. Technische Daten ohne Gewähr
maximum number of results exceeded
please refine your search
