drill grinding used for sale

1 x used double-sided Rotoles S600 with 2 grinding units and 1x brush Working width 600mmm Speed 60m/min Calibration milling planing machines with feed rollers Best accuracy of the boards and excellent results in delamination attempts, at any speed. ROTOLES S calibration machines are the best choice for calibrating boards and slats before gluing. Rotoles S calibration milling planing machines with feed rollers Best accuracy of the boards and excellent results in delamination attempts, at any speed. ROTOLES S calibration machines are the best choice for calibrating boards and slats before gluing.

Milling machine DECKEL MAHO DMG 125

End Milling Machine Drill Milling Machine working width mm: 3200 Left - right swivelling saws from 0° - 45°. Complete with drilling unit Suitable for machining doors and door posts.

Multi-spindle head, multi-spindle drilling head, drilling gear -Manufacturer: Romai, multi-spindle head 2 spindles -Type SMSK 2/23 -Drilling tool holder: MK3 -min. distance drill bit: mm -Dimensions: Ø 220 x 455 mm -Weight: 27 kg

Year of construction construction 1983 Drive power Drive power 83 kW Clamping table Clamping table 2500 x 2500 mm workpiece mass on table Workpiece mass 20 t Processing width on table 5770 mm Processing height on table 2800 mm processing depth 1985 mm Spindle diameter Spindle diameter 200 mm Slide cross-section Slide cross-section 530 x 550 mm Additional equipment Angle head large Angle head small

Rapid radial / Rapid radial / Snel radial DANUBE DR 13

Cordless angle drill, cordless angle drill, -Manufacturer: Bosch, cordless drill type GWB 7.2 VE -incl.: charger -Quantity: 1x drill driver available -Price: per piece -Transport dimensions: 240/180/H240 mm -Weight: 6 kg

Тип: Z4A Число осей/ шпинделей Доступны различные варианты головок 4x3 Расстояние между крайними шпинделями 2300 mm Регулируемая скорость сверления Высота стола от пола 840 mm Размеры стола 600x2350 mm Число прижимов 8 Мощность двигателя 6 kW(4x1,5) 400 V Скорость двигателя 2840 r.p.m Необходимое давление воздуха 6-8 bar Вес 425 kg Размеры для транспортировки 2450x960x1550 mm

electric motor, drive motor, engine -Manufacturer: Einhell, electric motor from column drill TB 13/5 EK -Power: 0.25 kW / 1420 rpm -Shaft: Ø 14 x 30 mm -Number: 6x motor available -Price: per piece -Dimensions: 185/123/165 mm -Weight: 4.6 kg/piece

Reamer, twist drill, drill bit -Twist drill: Ø 58.5 mm / Ø 60 mm -Recording: MK5 -on request: different sizes/quantities available from further stock -Transport dimensions: 610/120/H60 mm -Weight: 13.2 kg

Giana lathe mod. GFP14 - 710x 5300 - year 2007, control FAGOR GFP14

Webo in-line drilling machine - 2 machines: speed 90 - 1000 1/min. - 4 machines: speed 4000 - 6000 1/min. - Coolant device - Tool holder: MK2 - Width: 200 cm - Height: 200 cm - Depth: 100 cm Good condition fully functional can be visited and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article, in order to avoid misunderstandings, can be viewed before the purchase and tested under electricity. Please ask questions before buying to avoid ambiguity. For general questions or an appointment for a viewing, I can be reached at any time at the telephone number below or above. Errors in the description and prior sale excepted. VAT will be shown separately on my invoices. Shipping with freight forwarder.

Paper drilling machine Nagel Citoborma 280 AB

Manufacturer/ Make: SKODA Typ/ Type: W200 Year of construction/ year: 1987 X-way: 11500 mm Y-way/ Y-way: 4500 mm Spindle diameter: 200 mm

Drill bit, step chisel, drill bit for well drilling, core drill, core drilling machine, diamond drill bit, drill bit for well drilling machine -Drill bit: diamond core bit Ø 142 mm -Hole: Ø 125 mm -Dimensions: see photos -Dimensions: Ø 142 x 175 mm -Weight: 3.9 kg

Drill, rotary drill, magnetic drill, impact drill -Manufacturer: Bosch, impact drill case -Type: PSB 650 RE - Mounting: Quick-release drill chuck -Nominal power input: 650 W -Connection: 230 volts -Case dimensions: 390/345/H110 mm Total weight: 3.1 kg

High precision drilling and milling machine Aciera 22 VA Good condition from school operations Year of construction approx. 1990 Table 600 x 320 mm Speed 40 - 3600 rpm Speed setting rpm 4 automatic feeds 40-280 80-560 275-1800 550-3600 Spindle diameter 65 mm Drilling spindle stroke 120 mm Spindle holder: Aciera quick-change system Automatic thread cutting Drilling capacity in solid material 25mm Max drilling capacity up to 30mm Height adjustment via hand crank Motor: 1.1 KW Lamp Some quick-change shots Dimension WxDxH 90 x 130 x 185 cm Weight approx. 800 kg Technical information subject to reservation

Threading chuck, tap chuck, tapping chuck, drill chuck, collet chuck, quick-release drill chuck -Manufacturer: FRONTAL ABW, Quick-release drill chuck, MK3 mount -Type: 5-20 mm -Dimensions: Ø 75 x 257 mm -Weight: 2.9 kg

Workbench drilling machine FLOTT TB 6/I, II, III One-piece spindle - male cone B12 Manual spindle exit: 65 mm Speed: from 450 to 9000 RPM Throat depth: 160 mm Mini height in low position: 60 mm Max height in height position: 180 mm Head rotation around the column Voltage: 380 V Width: 300 mm Depth: 600 mm Total height: 700 mm Weight: approx 70 kg

I sell a Top Dubel drill multi-spindle drill Detel M-13, built in 2007. 3-spindle See good condition. Available the same.

Twin-spindle drilling machine, row drilling machine, drilling machine, bench drilling machine, pillar drilling machine -Spindle mount: B13 -Table size: 300 x 1100 mm -Protrusion: 150/180 mm -Spindle stroke: 50/70 mm -Weight: approx. 200 kg

Multi-stand drill Prior sale reserved - errors possible Internal Reference Number: D-1143-1

Multi-spindle drilling machine -4 motors (1 motor defective) -pneumatically exciting -Drilling depth approx. 30 mm -Max. drilling distance: 1000 mm -Drive: 0.36 kW 2800 rpm -Weight: 280 kg

Impact drilling machine, row drilling machine -Support table: 2200 mm -Multi-spindle head: 5 drill bits -Drill spacing: 32 mm (other multi-spindle heads available) -Version: mobile -Stops: adjustable -Dimensions: 2300/600/H1350 mm -Weight: 240 kg

Continuous drilling rig Biesse Techno Logic Masch. No 873/90 Position 1: Loader BIESSE-TECHNO LOGIC Item 2: Transfer BIESSE-TECHNO LOGIC Item 3: Transfer BIESSE-TECHNO LOGIC Item 5: Continuous drilling machine BIESSE-TECHNO LOGIC Item 6: BIESSE-TECHNO LOGIC horizontal continuous drilling rig Item 7: Transfer BIESSE-TECHNO LOGIC Item 8: Transfer BIESSE-TECHNO LOGIC Position 9: Brushing machine BIESSE-TECHNO LOGIC Item 10: Unloader BIESSE-TECHNO LOGIC Weight approx. 4 to L x W x H: 6.0 x 2.4 x 2.5 m Year of construction 1990 Dismantling by buyer The plant is in good condition, ready for operation Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax: 0041 62 966 21 12

Arm length: 1600 mm Drilling capacity in steel: Ø 50 mm Tapping in steel: M50 x 1.5 mm Spindle holder: MK 5 Spindle speeds: 28 - 2500 rpm. Spindle feed: 0.05 - 2 mm/rev Spindle stroke: 310 mm Spindle -> slab: 1500 mm max. Tension throwers; 1000 x 750 mm Clamping flat floor plate: 1820 x 986 mm Complete with: - Kuhlanlage - Operating instructions Spindle motor: 4 kW Country of origin: Czech Republic Machine Weight: 4300 kg Machine LxWxH: 3250 x 1120 x 3400 mm

Multi-spindle head, multi-spindle drill head, dowel drill head, hardware drill head -Dimensions: 190/85/75 mm -Drilling distance: 26 mm -Medium drill bit: offset by 5 mm -Number: 1x drill heads available Price: per piece -Weight: 2 kg/piece

I sell an Angular drill with hanging insert suitable for tur production. MARZANI MACCHINE CHEAP WORK Year of construction: 1993 Number of drilling spindle 1 (drill head fully -7 to +90° adjustable) Number of insert heads 1 (magazine suitable for turret hanging) Insert head mechanical, screw insert Very good condition. Available the same.

two-arm drill, rotary drill, magnetic drill -Recording: MK2 -Nominal power input: 1150 W -Connection: 230 volts -Max. drill diameter: 23 mm -Dimensions: 460/320/H100 mm -Weight: 6 kg

two-arm drill, rotary drill, magnetic drill -Recording: MK1 -Nominal power input: 400 W -Connection: 230 volts -Max. drill bit diameter: 15 mm -Weight: 7 kg

Radial Drilling Machine NOVISA NTR 1600 Spindle: CM5 Spindle exit Travel: 350 mm Spindle speed: from 25 to 1900 RPM Arm travel: 1600 mm Mini height in low position: 800 mm Max height in height position: 1500 mm Lubricant pump Voltage: 380 V Dimensions (L x W x H): 2600 x 1200 x 3000 mm Weight: approx 4 T

- Infinitely variable speed control - Quickly adjustable drilling depth stop - Thread cutting device - Undervoltage triggers - Table height adjustment via rack - LED lighting in the head - Continuous/normal drilling capacity R1: 23/25 mm - Thread cutting performance (depending on slope) R1: max.M 16x1 - Spindle MK II - Drilling depth 100 mm - Projection 260 mm - Column diameter 110 mm - Usable table surface (W x L) 420 x 340 mm - T-slot size (arm): number 2, distance 125 mm - Speed display digital - Drilling depth display digital - Drill depth stop quickly adjustable - Feed by hand - Motor three-phase current 400 V - Spindle speeds infinitely variable R1 with 20-2,000 1/min Option: Coolant device: € 525,- FACTORY WARRANTY: 3 years DELIVERY: free domicile incl. packaging NOT THE RIGHT MACHINE? WE ALSO CARRY OTHER FLOTT PRODUCTS - ASK FOR A QUOTE! FAS ...

New VDL 2D chiseling machine with the possibility of automatic drilling at distances of 25 and 32 with the possibility of tilting and turning in 2 directions. Technical parameters: Control of the machine with 1 lever Power of the main motor: 1.5 kW Tool speed: 2850 rpm Spindle diameter: 3 - 16 mm Stroke of the spindle: 180 mm Dimensions of the table: 600 x 450 mm Weight of the machine: 320 kg

Drill, rotary drill, magnetic drill, impact drill -Mounting: Drill chuck -Nominal power input: 500 W -Connection: 230 volts -Max. drill bit diameter: 16 mm -Transport case -Dimensions: 500/200/H110 mm -Weight: 9 kg

End mill, shank mill, milling cutter -Six-cutter -Finishing cutter -Diameter: 32 mm -Usable length: 200 mm -Type: HSSE N30 -Quantity: 9 pieces -Sale: only complete set -Weight: 12 kg

End mill, shank mill, milling cutter -Four-cutter -Roughing end mill -Diameter: 32 mm -Usable length: 40 mm -Corner radius: 4 mm -Type: HSSE -Quantity: 17 pieces -Sale: only complete set -Weight: 10 kg

Wood step drill bits, wood drill bits, countersink bits, end mills, drill chucks, click-type quick-change chucks -for: row drilling machine, hardware drilling machine -from: a woodworking shop -15 kg: Milling cutters, drill bits, countersinks, click-type quick-change chucks

Reamer, twist drill, drill bit, spiral countersink, three-flute, twist drill -Three-knife -Diameter: 17.75 mm -Usable length: 150 mm -Recording: MK2 -Type: HSSE Quantity: 19 pieces -Sale: only complete set -Weight: 6 kg

End mill, shank mill, milling cutter -Two-knife -Finishing cutter -Diameter: 25 mm -Usable length: 55 mm -Corner radius: 3 mm -carbide-tipped Quantity: 8 pieces -Sale: only complete set -Weight: 4 kg

End mill, shank mill, milling cutter -Two-knife -Finish cutter -Diameter: 32 mm -Usable length: 80 mm -Corner radius: 2 mm -Type: KHSS-E Quantity: 15 pieces -Sale: only complete set -Weight: 11 kg

Reamer, twist drill, drill bit, spiral countersink, three-flute, twist drill -Three-knife -Diameter: 16.8 mm -Usable length: 120 mm -Recording: MK2 Type: HSS -Quantity: 24 pieces -Sale: only complete set -Weight: 7.5 kg

Tool cabinet -with: spare parts for toolmaking, fixture construction -Various drill bushings: different sizes -various clamping elements -Dimensions: 670/300/H2000 mm -Weight: 200 kg

two-arm drill, rotary drill, magnetic drill -Recording: MK2 -Nominal power input: 150 W -Connection: 230 volts -Transport case -Dimensions: 350/300/H100 mm -Weight: 5.5 kg

Kramatorsk Model KJ1910 serial number 1913 Swing Over Bed: 1600mm Maximum Workpiece Length: 6300mm Maximum Drilling Diameter: 991mm Spindle power: 125.00kW Spindle Speed: 1 - 320 RPM Infinitely Variable power Existing Additional Chuck workholding range: 200 - 1250mm diameter, workpiece weight capacity using two open roll supports: 60,000kg, size range in closed backrest: 200 - 800mm, size range in open backrest: 630 - 1380mm, pressure head speed range: .125 - 500 infinitely variable, pressure head spindle bore diameter: 182 mm, pressure head motor power: 75kW DC, headstock speed ranges: 3, pressure head speed ranges: 2 Machine Length: 22950mm Machine Width: 4375mm Machine height: 2670mm Weight: 101091kg Condition Good

Rotary hammer, chisel hammer, combination hammer, Bosch hammer -Drilling/Chiseling -SDS Plus: Recording -Transport case -Weight: 5 kg

Diamond core drilling machine, core drilling machine -3x: drill stand -Max. Drilling capacity: Ø 60 mm -drilling depth: max. 400 mm -Drive: 1050 W -Speeds: 1500/3000 rpm -Core drill: Ø 18/24/29 mm -Sale: only complete -Weight: 70 kg

Multi-spindle head, drill beam, multi-spindle drill head, articulated multi-spindle head, row drilling machine, dowel drill head, dowel drilling machine, drilling gearbox -Number: max. 2x drill bits -Recording: M8 -right/left: rotating alternately -Drill bit spacing: 33 mm -Dimensions: 100/80/H130 mm -Weight: 2 kg

End mill, shank mill, milling cutter -Six-cutter -Roughing end mill -Various: Diameter -Type: HSS -Quantity: 11 pieces -Sale: only complete set -Weight: 6 kg

Multi-spindle head, drill beam, multi-spindle drill head, articulated multi-spindle head, row drilling machine, dowel drill head, dowel drilling machine, drilling gearbox -Quantity: max. 1x drill bit -Recording: M8 -Dimensions: 80/80/H150 mm -Weight: 0.8 kg

Core drill, crown drill, masonry drill, core drilling machine, diamond core bit, drill bit -Core drill bit: Ø 150 mm -Drill bit length: 470 mm -Quick-change mount -Weight: 5 kg