drill grinding used for sale

Dowel hole drilling machine Brand: VITAP Type: ALFA 21 CLASSIC New machine - One boring unit 21 spindles - QUICK CHANGE SPINDLES - Pneumatic cylinder for horizontal/vertical positioning of the boring group (45 degreed and any intermediate angles) - Front/top caliper to obtain the same boring measure between horizontal and vertical position - Tilting side stops adjustable by metric scale and nonius and magnifying lens on each stop - 2 safety clamps inclined 4 degrees - Height regulation of the boring group by mechanical digital position indicator; - 6 positions turret to adjust the drilling depth (0-80 mm) - Automatic vertical-horizontal depth difference device (10 mms) - Drilling speed adjustment from the panel control - Strengthened steel structures for tilting of the boring group - 1 motor HP. 2 (Kw 1,50) - Start/stop electropneumatic circuit by mean ...

New CNC drilling- and dowel inserting machine Brand: VITAP Type BLITZ 3.0 Blitz CNC drilling glueing and dowel inserting machine (axis X) 1300mm. Highly efficient and reliable thanks to a easy software. Ideal for JUST IN TIME production or mass production. Machine standard equipment: - Drilling head 3500 rpm - N °3 horizontal indipendent spindles - N° 3 vertical indipendent spindles - N °1 glue and dowels inserting unit - N °1 high capacity vibrator to feed the dowels - N° 1 low pressure pump for the glue Working area horizontal head: - X= 1300 mm - Y= 50 mm - Z= 50mm (vertical) - Z=25mm (horizontal) Combined drilling and driving unit for dowels: - Configurations of min. 6 x 25 mm and max. 10 x 40 mm are possible. - The desired dowel configuration must be specified when ordering. Sets for further dowel configurations are optionally availab ...

CNC unit for boring, routing and sawing Brand: Atemag Type: Function Line Duo With two tool interfaces, angle 90° Max. drive speed 10,000 R.P.M. Max. tool spindle speed 15,000 R.P.M Gear ratio i = 1:1,5 Turning direction left/right Torque max. 20 Nm Tool interfaces: ER25, ER 32, saw blade flange 30 mm, sawblade dia. max. 180 mm or modular

number of spindles: 4 bore capacity in steel (diameter): 25 mm bore stroke: 120 mm weight of the machine ca.: 0.85 t dimensions of the machine ca.: 1.55 x 0.65 x 2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel St 60: 30 mm bore capacity in cast iron GG 20: 30 mm Drilling capacity in St 60: 30 mm threading in St 60: M 16 threading in GG 20: M 20 Short spindle: MK 3 spindle stroke: 140 mm throat: 293 mm column diameter: 115 mm Machine table - usable table surface: 514 x 360 mm T-Slots Amount - Width - Distance: 2 x 14 x 224 mm Distance spindle-table min.: 132 / 724 mm feed: von Hand spindle turning speed - stepless: 225 - 4300 U/min total power requirement: 1,0/1,6 kW weight of the machine ca.: 260 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 30 mm throat: 275 mm bore stroke: 100 mm taper MK: 4 MK table-size: 420 x 340 mm feeds: nein mm/U turning speeds: 80 - 2000 U/min total power requirement: 0,9 / 1,45 KW weight of the machine ca.: 0,22 t dimensions: 0,85 x 0.6 x 1,9 m Pillar drill with: - Variable spindle speed - Digital speed display - Digital depth display - Forward/reverse rotation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Nominal drilling depth 750 mm Full drilling in steel approx. 30 mm Spindle speed max. 5700 min-1 Clamping table 1280 x 420 mm Transverse Sliding Table Coolant tank Miscellaneous Accessories

bore capacity in steel (diameter): 32 mm throat: 300 mm bore stroke: 140 mm taper MK: 3 MK table-size: 380 x 360 mm feeds: über Handrad turning speeds: 85 - 1100 U/min total power requirement: 1,3 KW weight of the machine ca.: 0,27 t dimensions: 0,95 x 0,6 x 1,92 m Pillar drill with: - Feed via handwheel - Spindle speeds via belt drive The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 32 mm throat: 325 mm bore stroke: 170 mm taper MK: 4 MK table-size: 570 x 480 mm feeds: 0,1 - 0,16 - 0,25 mm/U turning speeds: 60 - 1600 U/min total power requirement: 2,9 KW weight of the machine ca.: 0,65 t dimensions: 1,2 x 0,8 x 2,15 m Pillar drilling machine with: - Feed - Variable spindle speed - Coolant pump - Machine light The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 20 mm

0.75 KW 380 V 16 A Röhm Drill Chuck Supra 1 - 13 mm Speed 210 - 2580 rpm With substructure Length 74 cm Width 30 cm Height 98 cm

A Gebrüder Irle CNC large-format deep-hole drilling machine is available. Drilling capacity steel: 40mm, max. drilling depth: 1600mm, drill spindle adjustment: 350mm, vertical drilling unit adjustment: 700mm, power: 30kW, speed: 2940rpm, field range constant power: 1-3, armature range constant torque: 1-35, max. drill spindle torque: 1500Nm, rated speed: 163rpm, spindle flange diameter: 200mm, quill diameter: 2000mm. Feed: 500mm/min, rapid traverse: 1200mm/min, max. feed force: approx. 34.3kN, display: 0.005mm, vertical adjustment travel: 700mm, longitudinal adjustment travel: 13000mm, transverse adjustment travel: 650mm, swivel: 85°. Clamping plate dimensions X/Y/Z: 12500mm/1000mm, guide bed dimensions X/Y: 3350mm/455mm, controls: Heidenhain TNC 310. Documentation available. An on-site inspection is possible.

Offer 25511 Technical data: - Drilling capacity in steel ST 60 28 mm - Drilling capacity in steel ST 60 32 mm - Tapping device - Drilling spindle holder MK 3 long spindle - Drilling spindle stroke 180 mm - 10 drilling spindle speeds 250 - 2100 rpm - Projection approx. 290 mm - Max. distance table – drilling spindle approx. 620 mm - Table with 2 T-slots height-adjustable 520 x 450 mm - Drive 400 V / 1.0 / 1.3 kW - Space requirement approx. W 600 x H 1850 x D 700 mm - Weight approx. 280 kg

Drilling machine, bench drill, pillar drill, column drill, box-type drill, tapping machine, threading machine -Manufacturer: Strands, MK3 bench drill with cross table Demanders -Motor: 0.75/1.0 kW -Speeds: 100 - 30200 rpm, 8-stage forward/reverse rotation -Thread cutting device: via foot switch -Table size: 500 x 195 mm -Cross table travel: X360 mm Y160 mm Z440 mm -Spindle mount: MK3 -Spindle stroke: 135 mm -Protrusion: 255 mm -Dimensions: 780/800/H1540 mm -Weight: 218 kg

For sale is a heavy and robust industrial column drill from the manufacturer Perfect, model BF 40 VS. The machine impresses with its solid cast construction, high stability and reliable technology. Thanks to its automatic feed and variable speed control, it is ideal for metalworking, mechanical engineering, locksmithing, repair shops or training workshops. The machine is in used, working condition with signs of wear and tear. General information Machine Type: Industrial Column Drilling Machine Manufacturer: Perfect Model: BF 40 VS Year of Make: 1988 Condition: Used, functional Availability: Immediately available Technical data Drilling capacity steel: 40 mm Threading: up to approx. M30 Spindle holder: MK4 Quill stroke: approx. 180–200 mm Speed range: approx. 50–2000 rpm Feed: automatic Motor power: approx. 2.2–3 kW Operating voltage: 400 V Projection: app ...

Atlas Copco A-66 CLL crawler drilling rig with center fifth wheel on crawler undercarriage, pump foaming agent, double clamp Ø 310 with hydraulic piston puller 20 ton, mast with useful stroke 12.00 m, torque 1300 kgm, 6 cyl Deutz diesel engine. 106 HP

bore capacity in steel (diameter): 35 mm throat: 280 mm bore stroke: 150 mm spindle taper MT: MK 4 thread cutting attachment: M 30 table-size: 550 x 400 mm spindle turning speed - stepless: 80 - 1.400 U/min feed range - boring: 0,1 / 0,2 / 0,3 mm/U coolant: voltage: 400 V total power requirement: 1,3 / 2,3 kW weight of the machine ca.: 400 kg dimensions of the machine ca.: 0,70 x 0,80 x 1,95 m - Serial No.: 186367 - Excellent condition! - Automatic vertical feed - Threading unit Max. threading capacity: M30 - Reversible motor Speed 1: 80 – 700 rpm Speed 2: 160 – 1.400 rpm - Quick-action drill chuck ALBRECHT 1–13 mm - Coolant system The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

From a current recycling we offer you 2 used column drilling machines / thread cutting machines from maxion, type BS 36 GL. Year of Make: 2022 Condition: good Hours: Asking price: 5,000 € each Original price: 11.900 € each Equipment / accessories / other information: Tapping capacity: M5-M30 Spindle speeds: 160-260-380-580-880 rpm Spindle MK 4 Thread depth 90mm Drilling depth 160mm Radius 300m Table 550x440mm Overall height 2105mm Asset Manager: M. Vorkötter Phone: 0202-257273152 Mail: m.vorkoetterakf.de We will be happy to provide you with details upon request. Location: 68753 Waghäusel The sale is without warranty Subject to prior sale

Inv. Num. : 9141 Type: W 100 Producer: TOS Created: 1973 Parameters: Work table length: 1250 mm Work table width: 1250 mm Maximum weight of the workpiece: 3000 kg X-axis travel: 1600 mm Y-axis travel: 1120 mm Travel travel Z-axis: 1250 mm Machine weight: 14000 kg

A CNC radial drilling machine overhauled in 2018 is offered. Working range X/Y: 1050mm/1800mm, drilling capacity steel: 40mm, drilling capacity cast iron: 50mm, thread cutting: M36-M45, tool holder: SK40, speed range: 15rpm-2800rpm, quill stroke Z: 200mm, column stroke W: 410mm, table clamping surface X/Y: 1800mm/600mm, feed speed: 5mm/min-2000mm/min, rapid traverse X/Y: 7.5m/min, control: CNC control. Equipped with 360° swivel device, motorized tool clamping, three-jaw chuck for round parts, modernized LCD monitor, extensive tooling package. Weight: approx. 2900kg, overall dimensions X/Y/Z: approx. 2600mm/1900mm/2950mm. Inspection possible by arrangement.

Code: 0318 Brand: BIESSE Model: F 39 E - CE Standard Electronic multiple boring machine with 39 spindles for furniture, carpentry, custom-made furnishings, panels, kitchens, bathroom furniture, doors,window frames, and various - CE Standard Suitable for horizontal and vertical drilling, any intermediate drilling between 0 and 90° can be performed thanks to a gear motor and handwheel. Electronic control Technical data: N° 39 spindles Spindle rotation speed 4000 rpm Center distance between spindles 32 mm Max drilling center distance 1216 mm Drilling depth 65 mm Drilling head motor power 2,3 + 2,3 Hp Air operating pressure 6 bar Installed electrical power 4,1 Kw Overall dimensions mm 1800 x 1140 x 1600 h Weight kg 700 MACHINE SOLD UNDER THE CONDITIONS IN WHICH IT IS FOUND NOT RECONDITIONED

Offered is an automatic fitting drilling machine. Workpiece size L: 100-1350mm, W: 100-600mm, d: 16-25mm, operating pressure: 6-7bar, extraction air speed: 30m/s, extraction volume flow: 70m³/min, working height: 1000mm, traverse speed X-axis: 60m/min, traverse speed Y-axis: 50m/min, control system: Ferrocontrol CNC. Equipped with vibratory feeder for hinges, spiral vibratory feeder for buffers, drilling and insertion units, light barrier monitoring. Weight: approx. 6000kg, overall dimensions X/Y/Z: approx. 5500mm/2200mm/2400mm. Inspection possible by arrangement.

Offered is a CNC-controlled drilling and insertion machine. Workpiece size max.: 1350mm x 600mm x 25mm, operating pressure: 6-7bar, extraction speed: 32m/s, working height: 1000mm, control system: Ferrocontrol. Equipped with two-station machine for alternating loading, feed system for workpieces, vibratory feeder with sound-insulating hood for hinges, drilling and insertion unit, control cabinet, extraction collector. Weight: approx. 6000kg, overall dimensions X/Y/Z: approx. 6240mm/4500mm/2200mm. Inspection possible by arrangement.

Year of manufacture 1991 4 drilling spindles with automatic table movement Adjustable drill spindle spacing electr. Footswitch Mobile substructure Delivery date: immediately from stock

Manufacturer: Sandvik Model: Leopard DI650i Type of Machine : DTH Surface Drill Rig UNIT 1 - Year of manufacture: 2020 - Total engine hours: 19,041 - Engine replaced | Hours on new engine: 7,700 - Drilling hours: 7,355 UNIT 2 - Year of manufacture: 2021 - Total engine hours: 18,608 - Engine replaced | Hours on new engine: approx. 5,422 - Drilling hours: 7,443 Technical Details : - Drilling method: Down-The-Hole (DTH) - Hole diameter range: 115 to 229 mm (4.5 to 9.0 in.) - DTH hammer: Sandvik RH570 (4, 5 and 6 in.) - Flushing air capacity: 28.3 m3/min at 24 bar - Drill rod/tube diameter: 89, 102, 114, 127 and 140 mm (3.5, 4, 4.5, 5 and 5.5 in.) - Rotary head: MRH6 - Engine type: Caterpillar C15 (Tier 3 / Stage 5, Tier 4F) - Engine output power: 403 kW at 1,800 rpm - Cabin: iCab - Production capacity: 2.1 Mt/a (one shift) - Transport height: 3.5 m (11.5 ft) - Weight: 25,100 kg (55, ...

Manufacturer: Epiroc Model: FlexiRoc D65 Type of Machine : DTH Surface Drill Rig UNIT 1 - Year of manufacture: 2019 - Total engine hours: 29,346 - Engine replaced | Hours on new engine: 10,288 - Drilling hours: 10,523 UNIT 2 - Year of manufacture: 2020 - Total engine hours: 26,274 - Engine replaced | Hours on new engine: 8,967 - Drilling hours: 10,000 UNIT 3 - Year of manufacture: 2020 - Total engine hours: 25,005 - Engine replaced | Hours on new engine: approx. 6,500 - Drilling hours: 9,372 Find more here - .ucymachines/ Contact us at - sales@ucymachines

Speed range: 51-966rpm, feeds: 0.30-0.60mm/rev, number of drilling heads: 3, spindle mount: MK5, with coolant unit, electromagnetic feed clutch, multi-speed gearbox, T-slot clamping plate, motorized height-adjustable heads and automatic spindle feed, without documentation. An on-site inspection is possible.

Built in 1990 4 drilling spindles Adjustable drill spindle spacing Stacking slider left Triggering by microswitch Delivery date: immediately from stock

Key data: 40 mm, 240 mm

Machine Type: Column Drilling Machine Manufacturer: ERLO Type: TCA40 Year of manufacture: - Condition: used Offer will only be sent if a complete imprint is provided! Price 3.750 incl. 19% VAT / Fixed Price Location Warstein , Germany Reference number M-ERL-0526 DESCRIPTION We offer you a used column drill from the manufacturer Erlo. Performance in steel 40mm Strong gear feed Overall height 2350mm Weight 650kg Incl. solid 160mm machine vise. Availability: immediately Our offer is aimed at tradespeople who are registered in the sense of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions of payment. Errors in the descriptions and offers are reserved

Inv. Num. : 9173 Type: CM-H32Z Producer: CHMER Created: 2001 Parameters: Max. travel length of the X-axis: 300 mm Max. travel length of the Y-axis: 250 mm Maximum workpiece length: 610 mm Maximum workpiece height: 200 mm Maximum workpiece height: 420 mm Maximum table load: 120 kg Length: 1523 mm Width: 1183 mm Height: 2158 mm Weight: 700 kg

Column Drilling Machine GSP type 205 R Spindle: Ø 100 mm Cone CM4 Spindle exit: Ø 300 mm Rotation: from 12 to 1800 RPM Table size: 800 x 400 mm Year of construction: 1982 Maxi distance spindle nose/tablein low position: 700 mm Mini distance spindle nose/table: 250 mm Throat depth: 400 mm Cross-table 1150 x 400 mm Drilling/tapping function Automatic spindle advance The manual descent of the spindle is hard (works perfectly in automatic advance) Manual raising/lowering of the table Voltage: 380 V Width: 1300 mm Depth: 1700 mm Total height: 2700 mm Weight: approx 1,5 T

This 3-axis KOTEC PSD-4520 drilling machine was manufactured in 2020. It features a gantry type setup with a maximum processing capacity of 4500 × 2000 mm and a spindle motor of 18.5 kW, achieving up to 1780 RPM. The machine includes a CAD file interface and operates on a Windows-based system, ensuring ease of use and flexibility in operations. Consider the opportunity to buy this KOTEC PSD-4520 drilling machine. Contact us for more information about this machine.

Standard holders and accessories, attachment holders, SASSEX spiral drill bits, Sassex spiral drill bits, reaming bits, Sassex reamers, Sassex holders, tool holders, drill bit mounts, twist drills -Manufacturer: Sassex, clip-on holders, 4 pieces -Recording: MK5 -Type/Sizes: see photos -Submission/Price: complete -Transport dimensions: 530/320/H60 mm -Weight: 18.4 kg

Inv. Num. : 9200 Type: WH 63 Producer: TOS Created: 1966 Parameters: Work table length: 800 mm Work table width: 800 mm Maximum weight of the workpiece: 2000 kg X-axis travel: 1000 mm Y-axis travel: 710 mm Travel Z axis: 1000 mm Machine height: 2280 mm Machine length: 4050 mm Machine width: 2100 mm Machine weight: 7600 kg Equipment: DRO Vise Cube Rulers

Key data: 28 mm, 285 mm

Drilling capacity in steel: approx. 28mm Projection approx. 285mm Drilling depth approx. 125mm Spindle mount MK3 Infinitely variable speeds from 130-1150 rpm 3 automatic feeds 0.1 - 0.2 - 0.3mm/rev Table clamping area approx. 500 x 370mm Table adjustable in height via rack Machining base plate approx. 350 x 320mm With motor 1.5kW, 1415 rpm, 380/220V Weight: approx. 380kg Condition and details see pictures

Offer 26144 Technical data: - Drilling capacity in steel ST 60 40 mm - Drilling capacity up to 45 mm - Tapping device up to M 36 - Feeds infinitely adjustable - Drilling spindle holder MK 4 - Drilling spindle stroke programmable up to 175 mm - Drilling spindle speeds infinitely variable 30 - 2400 rpm - Projection 300 mm - Table with 2 T-slots 600 x 500 mm - Height adjustable via rack with hand crank - min. - max. distance table - drilling spindle 70 - 830 mm - Drive 400 V / 7.5 kW - Space requirement approx. W 600 x H 1980 x D 950 mm - Weight approx. 500 kg

bore capacity in steel (diameter): 50 mm arm length: 1.600 mm workpiece height max.: 1.200 mm distance spindle/base plate: 320 - 1.220 mm spindle taper MT: 5 quill stroke: 315 mm throat min.: 350 mm throat max.: 1.600 mm quill feed: 0,04 - 3,20 mm/U drive capacity - spindle motor: 4,0 kW spindle turning speed range: 25 - 2.000 U/min column diameter: 350 mm voltage: 400 V total power requirement: 6,5 kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: 2,45 x 1,00 x 2,65 m - Serial-No.: 4045935 - Clamping cube 630 x 500 x 500 mm - Coolant pump The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- 4 head drilling machine - with the existing accessories

Danube DR 23 - High Radial Drilling Machine -Drilling capacity / steel approx. 28mm -Projection approx. 700mm -Morse taper MK 3 -Speed range 70-1550 rpm - Gearbox -Feed range 0.075-0.3mm -Drilling depth 130mm -Tapping device -Hydraulic clamping -Documentation Dimensions: Hjbkn Asvw D Smeu S Tol LxWxH 2x1.7x1.9 meters / Weight 1900Kg

PETECH WEW5050 pillar drill is designed for precise drilling of holes with a maximum diameter of 50 mm. Machining is performed by means of a work head with a reliable spindle. The work table with adjustable height and rotation around the column allows for convenient positioning of the workpiece and adjustment of the working position. The workspace is illuminated by a lamp mounted on the body of the PETECH WEW5050 machine. Technical specifications of the PETECH WEW5050 column drill press - maximum drilling diameter: 50 mm - workspace illumination

Alzmetall AB 3 ES - Column Drilling Machine -Drilling capacity / steel 35mm -Projection 280mm -Drilling stroke 180mm Hebkn Auevtzrvj S Tol -Recording MK 3 -Table size 600x470mm -Stepless speed regulation -Drilling depth stop -Drill chuck -Documentation Dimensions: LxWxH1.2x0.8x2.1 meters / Weight 550 kg

Collet / Gamesa - Radial drilling machine / mobile crane -Boom approx. 1200mm -Universal angle head can be adjusted in several ways -Spindle speed 95 - 750 rpm -Automatic feeds -Morse taper MK4 -Boom height adjustable approx. 1400mm -Control cabinet retrofit Dimensions: LxWxH 2x1x2.1 meters / Weight 1500Kg Hebkjvucbhon Au S Tsl

GILLARDON GB 20 Drilling capacity in steel approx. 25mm Projection 285mm Drilling stroke 150mm Table clamping surface 400x400mm Table adjustment approx. 650mm Bnwaxdsulle Drilling depth stop Stepless speed regulation Speed display Emergency stop Work light Footswitch Dimensions LxWxH 0.8x0.6x2 meters / Weight 450Kg

column drill / GILLARDON GB 25 -Drilling capacity / steel 32mm -Drilling capacity / cast iron 35mm -Speed range - Stepless 60-1800 rpm -Direction of rotation / Right-Left -Morse taper MK 3 -Projection 290mm -Quill drilling stroke 175mm -Table surface 450x355mm -Table height adjustment by hand crank -Tapping device -Coolant device -Drill chuck -Analogue speed display -Footswitch -Emergency stop -Documentation Dimensions: LxWxH 0.7x0.7x2Meter / Weight 450Kg

Standard holders and accessories, attachment holders, SASSEX spiral drill bits, Sassex spiral drill bits, reaming bits, Sassex reamers, Sassex holders, tool holders, drill bit mounts, twist drills -Manufacturer: Sassex, drill bit with drill blade Ø 60.5 mm -Reamer: Type H3 52.1-65 -Recording: MK4 -Dimensions: Ø 60 x 425 mm -Weight: 2.3 kg

Column Drill MAXION / IXION BS 25 ST - G -Well-groomed general condition -CE marking -Year of manufacture 2000 -Drilling capacity / steel 25mm -Tapping device up to M20 -Spindle holder / Morse taper MK 3 -Drilling stroke / spindle stroke 120mm -Projection 260mm -Speed range / infinitely variable 120-2160 rpm -Automatic feed - Work table size 500x365mm -Column diameter 110mm -Spacing/Spindle Table 90-760mm -Drive power 1.5 KW -Drill chuck Dimensions: LxWxH 0.8x0.5x2 meters / Weight 300Kg

DAREX AP 5000 / Precision Twist Drill - Automatic Grinding Machine -CE marking -Grinding range 1.5 - 26 mm -Suitable for standard twist drills (HSS cobalt, optional carbide) -Types of grinding - cone shell grinding as well as automatic cross grinding (split point) to reduce the cross-cutting edge -Automatic operation -Various operations Dimensions: LxWxH 0.5x0.5x0.4 meters / Weight 50Kg

ARBOGA UM 3508 Drilling-Milling Machine -Operating voltage: 380 - 415 V -Connection: 1.5 kW -Speed: up to 1400 rpm -Rated current: 5.7 A -Speed: from 70 to 2590 rpm -Drilling depth: up to 170 mm -Table dimensions: 650 x 270 mm -with three grooves -Incl. three-axis digital display from the manufacturer HEIDENHAIN also an attached vice, jaw width: 85 mm and a matching dividing head Dimensions: LxWxH 1.2x1.1x1.9 meters / Weight 700Kg

Standard holders and accessories, attachment holders, SASSEX spiral drill bits, Sassex spiral drill bits, reaming bits, Sassex reamers, Sassex holders, tool holders, drill bit mounts, twist drills -Manufacturer: Sassex, drill bit with drill blade Ø 55.2 mm -Reamer: Type H3 52.1-65 -Recording: MK5 -Dimensions: Ø 55 x 315 mm -Weight: 2.3 kg

PANHANS 116 YOC 1986 Motor power: 1.5 kW 2-lever operation Max. drilling depth: 130 mm Height adjustment: 135 mm Max. slotted hole length: 240 mm Height adjustment by handwheel Dowel pitch: 16 / 22 / 25 / 32 mm Miter ruler (adjustable) Workpiece stop 1 eccentr. Workpiece clamp Line laser (Z-laser) 230V Chassis Table size: 510 x 290 mm Weight: 220 kg incl. various Gebr. Drills Dimensions (approx. dimensions): W: 90 cm T: 125 cm H: 115 cm Manufacturer information