drill grinding used for sale

Manufacturer: AgieCharmilles Model: EDM DRILL20 Year of Manufacture: 2013 Type of Machine : Start hole EDM machine Technical Specifications - Drill Diameters: 0.5 mm, 1 mm, 1.5 mm, 2 mm - Travel Distances: X 300 mm / Y 200 mm / Z 300 mm - Phase: 3 - Voltage: 380 V - Power: 4 KVA - Frequency: 50 Hz - Current: 4.5 A - Short-circuit Current: 10K A - Weight: 875 KG Condition and Accessories The machine is in used condition with normal signs of wear. Extensive accessories are included. Find more here - .ucymachines/ Contact us at - sales@ucymachines

Flott SB M3 ST Pillar Drilling Machine. 3-speed 380V motor, runs smoothly. Spindle speeds are steplessly adjustable via the variable speed drive. Speeds adjustable from 200 to 2000 RPM. MK3 spindle taper. Quick stroke: 120 mm Drilling depth is adjustable. Table: 400 x 320 mm Table height is adjustable. Includes Röhm 3 to 16 mm drill chuck. Includes vise. Spindle guard. Emergency stop switch. Made in Germany. Machine is in good, well-maintained condition. Overall dimensions: 60 x 40 x 182 cm

The drill drive (drill head) and flushing pipes have a 3-inch (75 mm) passage for easy installation of 50/60 mm filters and gravel filling. , , The rotation of the flushing pipes is driven by a hydraulic motor, with hose couplings connected to a hydraulic system. In addition, the SB 1 flushing drill drive can be operated in such a way that the rotation and opening/closing of the spade valve is controlled hydraulically., For installing drainage/wellpoint filters and pouring gravel (optional)., Weight (kg): 175 (without lance), , Hydraulic motor: CCM160, RPM 170@100L, Flow: 100 (max 125) l/min, Working pressure: 200 (max. 240) BAR, Oil bath: 8 liters, Gear ratio: 3.09:1, Suitable for flushing pipe: 3 inches (75 mm) 4-8 meters long, Lances/flushing pipes included: , ø80 mm, length 387 cm, ø100 mm, length 520 cm, , = More information =, , Year of manufacture: 2024, Empty weight: 160 kg, Te ...

Drill Bit Grinding Machine GÜHRING Type SS 15Fabr. No. 909 Year of construction approx. 1977Drill diameter max. 40 mmGrinding wheel diameter right 300 mmGrinding wheel diameter left 250 mmGrinding wheel width 40 mmGrinding spindle speed approx. 2800 rpmMotor power approx. 2.2 kWNet connection 380 volts, 50 Hz- tip angle infinitely adjustable- Sharpening device- Gear motor for height oscillation in front of the cup wheel- Diamond dressing holder- Various drill holders-

Table, Drilling and Tapping Machine FLOTT Type TBZ 15 GLFabr. No. 32177027 year of construction 1986Drilling capacity 15 mmSpindle mount MK2Throat depth 195 mmPine stroke 80 mmTable size 275 x 200 mmColumn diameter 70 mmSpindle speed 80 - 4500 rpm. 18 stepsMotor power 0.55 + 0.75 kWNet connection 380 volts, 50 Hz- 6 belt steps from the motor and 2 belt stages to the drilling spindle 2 motor speeds- 3 pieces guide cartridges 0.7mm + 0.8mm and 28G available- Drill head height adjustment via crank with rack on the

Magnetic Drilling Machine, Magnetic Drilling MachineCore Hole Drilling Machine, Metal Core Hole Drilling MachineDR. BENDER Type EK 323Masch No. 180543 year of construction approx. 1988Drilling capacity 23 mmSpindle holder MK 2Spindle speed 160 / 400 / 1250 rpm. Magnet 215 x 105 mmDrilling unit 220 Volt, 50 Hz, 1025 WattE-Magnet 220 Volt, 50 Hz, 65 Watt- Spindle speed via 3 gear stages- Left and right rotation- E-magnet KOCH, type KL32/6- Drill head height adjustment guided in a linear guide- Manual expulsor- Drill stand on

Radial drilling machine WEBO type R4bRFabr. No. 15 / E195 Year of construction approx. 1965Drilling capacity 40 mmThroat: approx. 1250 mmSpindle holder: MK 4Spindle speed: 30 - 1325 rpm. 9 stepsFeed from 0.12 - 2 mm/rev. 9 steps; used

Column Drill ALZMETALL Type AB 4 SVMasch. No. 14805 Year of construction approx. 1980Drilling capacity 40 mmSpindle holder MK 4 - Short quillThroat projection 340 mmQuill stroke 180 mmTable size 710 x 560 mmColumn diameter 160 mmSpindle speed 30 - 765 rpm. infinitely variableMotor power 2.3 and 3.4 kW pole-switchableMains connection 380 volts, 50 Hz- Spindle speed over 2 motor speeds and infinitely variable gear- Gears with 2 gear stages for high torque at low speeds- Spindle on/off via

Column drilling machine GOTHABear power 30 mmSpindle holder MK 3 - long quill, throat depth 350 mmPine stroke 200 mmTable size 460 mmSpindle speed 160 - 750 rpm. 4 stepsFeed rate 0.1 - 0.2 - 0.3 mm/COLUMN diameter 160 mmMotor power 2.2 kWNerg connection 380 volts, 50 Hz- Spindle speed via 4 gear stages- Automatic feed- Rotatable drilling table with mechanical clamping- Table height adjustment via hand crank- Clamping surface at the machine foot 450 x 450 mmSpace required L x W x H 700

Column drill INFRATIREA - ORADEA type PH - 031Series. No. 02434 Year of construction 1975Drilling capacity 40 mmSpindle holder MK 4 - short quillThroat depth 320 mmQuill stroke 250 mmTable size 400 x 400 mmColumn diameter 160 mmSpindle speed 85 - 1500 rpm. 6 gear stagesMotor power 2.2 kWNet connection 400 volts, 50 Hz- Spindle speed via 6 gear stages- Clockwise and counterclockwise rotation- Automatic feed 0.10 - 0.16 - 0.25 - 0.4 mm/U- Drilling table swivelling- Table height adjustment via

Used Radial Drilling Machine DONAU Donauflex 145 Year of Make: 2006 Only a few hours of operation. • Drilling capacity in steel 45 mm • Boom travel 1,050 mm • Drilling radius min. 540 mm / max. 1,590 mm • Spindle speed 15 - 2,800 rpm • Tapping device • Tool holder MK 4 • Hydraulic clamping for boom and lifting column • Electromagnetic feed clutch • Machine light

Drilling machine, column drilling machine, pillar drilling machine, pillar drilling machine, multi-spindle head, multi-spindle drilling head, drilling gear -with two-spindle drilling head Manufacturer Sigloch Schrieder Type: V602 -Drive power: 1.02/0.88 kW -Drill distance adjustable: 18-110 mm -Max. Drill: 2x Ø 6 mm -Table size: 275 mm -Spindle mount: MK3 -Projection: 220 mm -Speeds: 100-2900 rpm -Columns: Ø 100 mm -Spindle stroke: 75 mm -Transmission -Dimensions: 900/400/H1910 mm -Weight: 230kg

Large set of HSS drill bits and drilling tooling including precision drill bits, Morse taper drills, centering drills and machining accessories. This set is ideal for general mechanics workshops, CNC workshops, industrial maintenance or technical schools wishing to supplement their stock of tools. The bundle covers a wide range of applications: Steel drilling Precision drilling Centering Conventional machining Industrial maintenance Mechanical manufacturing The presence of many Morse taper drills and large diameters represents an important value for any workshop equipped with drill presses or conventional machine tools. Auction-ID: A1-48554-58

Instruction Manual Auction-ID: A1-48552-29

Unused, handbook available Auction-ID: A1-40397-76

HBM Drill Sharpener, Drill Grinder From 3 to 13 mm In just three simple steps, you can ensure that blunt, worn drills are extremely sharp again. The grindstone at the drill grinder consists of diamond and is therefore extremely hard. That way you always achieve the desired results quickly. You can be sure of a good result, especially with HSS drills. In this way, this device is perfect for use in industrial workshops. Furthermore, the sharpener is suitable for use on just about any type of drill. So it is a flexible tool. Auction-ID: A1-40897-78

Benson 101-piece cobalt drill set 101 piece cobalt drill set (3x) Auction-ID: A1-40897-51

Stichelbock, Stitch Grinding Machine Scripta, very good condition, Collets. More information on request Special price

Drill grinding machine drill Grinding drillautomaticallys automatically in one clamping. maximum drill diameter 60mm (probably 80mm) Also suitable for drills with three or four cutting edges. Ready for immediate use. Simon SP50 SP80 Special price

Drill grinding machine for 1.55 to 25.4 mm - see pictures

Drill diameter: 2 - 13 mm Tip angle: 90° - 140° Speed: 4800 rpm Connection: 230 V Engine power: 0.18 kW Weight, approx.: 11 kg Dimensions, approx.: 320 x 180 x 190 cm Characteristics: - Ideal for grinding HSS/hard metal spiral drills - Safe operation due to forced grinding - Peak angle adjustable from 90° - 140° - Compact design, with collet storage in the machine and handle for quick storage - Including sharpening device to reduce feed force - Device for back grinding of the drill cuttings to reduce the friction between the drill and the workpiece - Rotor with precision ball bearings Delivery: - Grinding wheel CBN - 11 collet pliers ER 20, 3 - 13 mm - collet holder ER 20

Drill diameter: 13 - 32 mm Tip angle: 90° - 140° Speed: 4800 rpm Connection: 230 V Engine power: 0.25 kW Weight, approx.: 28 kg Dimensions, approx.: 490 x 250 x 260 mm Characteristics: - Ideal for grinding HSS/hard metal spiral drills - Safe operation due to forced grinding - Peak angle adjustable from 90° - 140° - Compact design, with collet storage in the machine and handle for quick storage - Including sharpening device to reduce feed force - Device for back grinding of the drill cuttings to reduce the friction between the drill and the workpiece - Rotor with precision ball bearings Delivery: - Grinding wheel CBN - 20 collet pliers ER 40, 13 - 32 mm - collet holder ER 40 Optional extension, at extra cost: - collet set 5pcs. 8.0 / 9.0 / 10.0 /11.0 /12.0 mm

grinding range: 2 - 20 mm sharp cornered angle min./max.: 90 - 135 Grad connected load: 230 V weight of the machine ca.: 8,6 Kg dimensions of the machine ca.: 0,35 x 0,2 x 0,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

drill diameter: 1,5 - 25 mm lip angle: 40 - 180 ° 6-jaw-chucks: various equipment: manual included: Encapsulated drive motor: closed version, air-cooled, rotary and AC drills with cylindrical or conical shank left and right-hand drills 6 Jaw chuck Device for compressed air cooling various equipment (see pictures) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

May SS80 U Machine can be visited by arrangement under power

Specifications: Drill diameter: 3 - 32 mm Center angle: 90° - 140° Speed grinding wheel: 4800 1/min Connection: 230 V Motor power: 0.25 kW Weight, approx.: 32 kg Dimensions LxWxH, approx.: 360 x 250 x 310 mm Characteristics: - Ideal for grinding HSS/carbide twist drills - Easy to use - Safe operation due to forced grinding process - Peak angle adjustable from 90° - 140° - Compact design, with collet storage in the machine and handle for quick storage - Including spout alignment for flawless centering of the drill on the workpiece and to reduce the feed force during drilling - Device for back grinding the drill edges to reduce friction between drill and workpiece - Rotor with precision ball bearing - Vibration-free running due to high dead weight - CE Scope of delivery: - Grinding wheel CBN - 30 ER collets ER 40, 13 - 32 mm (suitable for intermediate sizes) - ...

Specifications: Drill diameter: 3 - 20 mm Center angle: 90° - 140° Speed: 4800 1/min Connection: 230 V Motor power: 0.12kW Weight, approx.: 8.6 kg Dimensions, approx.: 290 x 150 x 180 cm Characteristics: - Ideal for grinding HSS/carbide twist drills - Safe operation due to forced grinding process - Peak angle adjustable from 90° - 140° - Compact design, with collet storage in the machine and handle for quick storage - Including propping alignment to reduce feed force - Device for back grinding the drill edges to reduce friction between drill and workpiece - Rotor with precision ball bearing - CE Scope of delivery: - Grinding wheel CBN - 11 collets ER 20, 3 - 13 mm - 7 collets ER 24, 4 - 20 mm - Collet holder ER 20, ER 25

Ref. -No.: 10120 Manufacturer: BRIERLEY Storage location: Halberstadt Country of origin: Deutschland Workspace: 2,5- 32 mm

drill diameter: 2 - 13 mm drilling length: ca.160 mm lip angle: 90 - 135 ° total power requirement: 150 W weight of the machine ca.: 8,5 Kg dimensions of the machine ca.: 20 x 40 x 20 cm Grinding range from 2 - 13 mm Accesories: CBN grinding wheel for HSS tools ER 29/12 pliers set 12 pieces from 2 - 13 mm, increasing by 1 mm, double slotted for intermediate sizes Operation manual Spare part list The machine can be demonstrated in our company. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Drills Grinding Machine DECKEL SOE Spindle speed: 4500 RPM Maxi bore of clamps: 17,5 mm Maxi sharpenable radius: 10 mm Maxi lateral displacement: 10 mm Angle adjustment: 45° Maxi displacement: 100 mm (see technical details) Delivred with 1 set of clamps + different diamond grinding wheels Voltage: 380 V Width: 600 mm Depth: 600 mm Total height: 1300 mm Weight: approx 150 kg

grinding range: 8 - 32 mm sharp cornered angle min./max.: 90 - 140 Grad connected load: 230 V weight of the machine ca.: 16 Kg dimensions of the machine ca.: 0,43 x 0,24 x 0,24 m Drill grinding machine: Additional station for grinding back the drilling cutting surface (clearance angle) 25tk. Collets ER 40 are included in the scope of delivery, these are also suitable for clamping intermediate sizes. For grinding twist drills made of HSS and Hard metals with a TiN layer of 8 - 32 mm. Rotor with precision ball bearings guarantees smooth running. Vibration-free running thanks to its heavy weight and rubber feet. Sharpening angle adjustable for all common twist drills. Package dimensions: 430 x 240 x 240mm. Weight 16kg. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding range: 2 - 13 mm sharp cornered angle min./max.: 90 - 140 Grad connected load: 230 V weight of the machine ca.: 10 Kg dimensions of the machine ca.: 0,35 x 0,2 x 0,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding range: 3 -28 mm angle adjustable from - to: horizontal 0-180 Grad angle adjustable from - to: vertikal 0-45 Grad angle adjustable from - to: negativ 0-52 Grad clamping range: 3 - 28mm mm 0: 5200 U/min connected load: 230 / 250 Volt / Watt wheel diameter: 100 x 50 x 20 mm weight of the machine ca.: 45 Kg dimensions: 0,5 x 0,4 x 0,4 m This grinder is ideal for regrinding tools such as end mills, drills, TIG welding needles and much more. comes standard with: Lathe tool accessories Drill accessories Accessories for milling 5C spring collet (4-6-8-10-12 mm) Clutch key 38-42 Grinding wheel wrench Allen key M3-M8 screwdriver Diamond grinding disc Ø 100 x 50 x 20 Grinding wheel: Ø 100 x 50 x 20 Diamond pen Spring collet: 3/16 - 5/16 - 3/8 - 1/2 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Graver grinding machine Make: Lid Model No.: S0 Built in 1994

for twist drills: 3 - 50 mm Ø Acute angle: 90 - 140° Adjustable clearance angle Grinding motor: 2800 rpm, 0.25 kW Gear motor for swivel movement: 0.12 kW Grinding wheel dimensions: 175 x 32 x 20/90 x 20 mm Space requirement: 800 x 550 x 1140 mm

Max. Drilling diameter: 40mm, grinding wheel diameter: 200mm, grinding wheel width: 40mm, speed: 2800rpm, machine dimensions X/Y/Z: approx. 1200mm/850mm/1400mm, weight: approx. 350kg. Including cooling lubricant device and 10x spare grinding wheels. Documentation available. On-site inspection is possible.

Manufacturer: Avyac Model: NC540 Year of Manufacture: 2021 Type of Machine : Drill grinding machine Condition : Like new Operating Hours: 1200 approx Loading system: Yes, automatic loading system included Weight: 2,000 kg Certification: CE marked Application: Grinding of drill bits and single-lip drill bits Find more here - .ucymachines/ Contact us at - sales@ucymachines

bore capacity in steel (diameter): - mm throat: - mm bore stroke: mm total power requirement: kW weight of the machine ca.: 400 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Grindable diameter from 2 - 40 mm. Smallest and largest point angle: 40 – 180 °. For right- and left-hand cutting tools, 1-12 cutting edges. For sharpening twist drills, step drills, taps. Rich accessories and a manual for the machine are available.