drill grinder used for sale

double grinder, double grinder, column grinder, column grinder, drill grinder -Double grinder with: water cooling -Grinding disc: max. Ø 450 x 63 mm -Speed: 950 rpm -Engine power: 3.3 kW -Operating voltage: 380 volts -Quantity: 1 pieces available -Price: per piece -Dimensions: 370/370/H1090 mm -Weight: 404 kg

WALTHER Trowal Type CA 650 -Drum diameter 1600mm -Speed 1450 rpm -Timer -CENTRIFUGE -Soundproof cover -Stair landing -Power 11KW Hebkswbtdlon Au S Tsl

Walther CN - 550 -PN Mass Grinding Machine and Rösler Z300 Turbo Floc Centrifuge -Walther Trowal CN-550-PN -1460 rpm -550 liter capacity -Motor 3.5 KW -Pneumatic soundproofing cover -Control cabinet -Dirty water / drain device -Compound - Sliding Stones 2xBoxes -Documentation -Dimensions: LxWxH 2x1.8x1.8 meters / Weight 1500Kg -Rösler - Z300 Turbo-Floc / Centrifuge -Year of construction 1996 -Rotor speed 3160 rpm -Power 4 KW -Max. throughput capacity 800 / litres / hour -Documentation -Dimensions LxWxH 1.7x1x1.6 meters / Weight 400Kg Hsbkn Aev Dlzpeu S Tol

GOODWAY GRW-4010 Traveling head Cylindrical grinder YOM 2018 About 600 working hours Control Mitsubishi M70 Distance between centers 1030 mm Max. swing over table Ø 420 mm Max. load between centers 750 kg Max. external grinding diameter Ø 400 mm Roundness 1.5 µm Machine positioning accuracy 2 µm WHEEL SPINDLE Swivel angle 0°~35° Wheel O.D. x width x I.D. Ø 610x Max.100x Ø 203 mm Wheel spindle travel 320 mm Min. setting unit 0.001 mm Max. rapid traverse speed 6 m/min. Grinding feed rate 0.001 - 6,000 mm/min. WORK TABLE Swivel angle -3° ~ +8° Max. rapid traverse speed 10 m/min. Min. setting unit 0.001 mm Grinding feed rate 0.001 - 8000 mm/min. WORK-PIECE SPINDLE Servo Spindle motor -Swivel angle Swivel angle +90° ~ -30° Center taper MT#5 TAILSTOCK Travel 35 mm Center taper MT#5 MOTOR Axes drive motor X-axis 3.5 kW Z-axis 4.5 kW Wheel spindle moto ...

KROMAS VM 200 Mass Grinding Machine -Capacity 200 liters - Motor power (kW): 1.1 kW -Inner diameter 980mm -Soundproof cover -Separation facility -Control / ON / OFF / SAVE / TIMER / Stepless speed regulation -Machine feet -Sliding Stones -Documentation Dimensions: LxWxH 1.5x1.5x1.6 meters / Weight 650Kg

serial number: 208892 control: Siemens 611 weight: 6,3 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Including trolley for removing breaking worm and trolley for screw, plates and knives, Hole plate diameter: 280 mm, Capacity: 5.5 - 8.5 t/h frozen blocks, Hopper: 600 litres, Power: 3 x 400V, 50Hz, 160kW, Dimensions: 3250 x 1650 x 2450 mm, Weight: 5000 kg

Ø grinding wheel dimensions (od x id x width): Ø 650 x Ø 304,8 x 500mm, Ø min / max to grinding: 3/200 mm, Regulating wheel width: 500 mm, Regulating wheel speed nº: Infinite, Min / max regulating wheel speed (r.p.m.): 10/255 r.p.m., Diamond dressing speed: 255 r.p.m., Regulating wheel dimensions (od x id x width): Ø 350 x Ø 203,2 x 500mm, Grinding wheel width: 500 mm, Maximum infeed grinding length: 500 mm, Motor power grinding wheelhead: 55 Kw, Power hydraulic motor: 0.37 kW, Total power: 65 kW, Voltage: 220 / 380V, Long: 2.300mm, Width: 2.800mm, High: 2.100mm, Weight: 15.000 kg, Accessories included: Intern feeder, automatic feeder with Allen Bradley PLC, MARPOSS process measurement equipment / Automatic feeder with Allen Bradley PLC, Team process measurement MARPOSS, internal workrest

A fully automatic Cleveland CNC cut-off and face grinding machine for carbide and HSS bars is available. Grinding spindle speed: 2000rpm, max. cut-off wheel diameter: 200mm, workpiece diameter range: 3mm-32mm, max. workpiece length: 500mm, length accuracy: +/-0.02mm, face runout accuracy: +/-0.01mm. Machine dimensions X/Y/Z: approx. 1900mm/1200mm/2400mm, weight: approx. 1700kg. Documentation available. An on-site inspection is possible.

Code: 0432 Brand: TOMMASI E BONETTI - ITALY Model: T O6 SA - CE Standard Column grinder with dust extractor for metalworking, workshops, laboratories, joinery workshops, structural steelworks, etc. - CE standard Three-phase motor Hp 1,5 2800 rpm Grinding wheel dimensions: 200 x 25 x 20 mm Extraction motor 0,5 Hp Overall dimensions mm 560 x 680 x 1000 h Weight kg 25

Surface Grinding Machine MAGERLE type F7 Travel X: 700 mm Travel Y: 280 mm Travel Z: 390 mm (without magnetic chuck) Magnetic chuck dimensions: 700 x 250 mm Grinding wheel: Ø 300 mm x Width 50 mm x Bore Ø 127 mm Spindle motor speed: 1850 RPM Auto feeds X - Y - Z Renovated electrical panel Diamond grinding Lubricant tank Voltage: 380 V Length with ends table: 2500 mm Width: 1800 mm Depth: 2200 mm Weight: approx. 3,5 T

A Se-Ma meat grinder and bowl cutter combination machine is available. Bowl cutter volume: approx. 50l, bowl diameter: 940mm, upper edge height on bowl cutter side: 820mm, knife heads: 6, grinder plate diameter: 130mm, feed bowl internal dimensions X/Y: 600mm/820mm, feed bowl external dimensions X/Y: 630mm/850mm, upper edge height on grinder side: 1040mm, machine dimensions X/Y/Z: approx. 1800mm/1050mm/1400mm, weight: approx. 500kg. The machine is not equipped with a mixing gear. An on-site inspection is possible.

Frozen meat grinder Factory overhauled 2024

charge load: 620 Liter : 1.700 mm tank diameter / tank height: 1.550 / 600 mm : 450 mm motor capacity: 4,5 / 7,5 kW motor speeds:: 900 / 1.485 U/min voltage: 400 V total power requirement: 8,5 kW weight of the machine ca.: 1,6 t dimensions of the machine ca.: 2,00 x 1,70 x 1,50 m Soundproofing cover bracket: 3,30 x 0,60 x 0,40 m Finishing machine - Serial-No.: 36225 / 05 - Machine ON: 6.469 h - Pneumatic separating flap - Timer - Pneumatic soundproof cover The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

charge load: 620 liter Outer dia. of work tank: 1695 mm tank length (expanded): 3800 mm width of working tank: 430 mm speeds: 900 - 1485 U/min voltage: 400 V total connected load: 7,5 kW weight of the machine ca.: 1600 kg dimensions of the machine ca.: 1,80 x 1,70 x 1,30 m - Serial No.: 18585/98-03 - with continously variable motor speed - with pneumatic separation flap The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

With single mixer in the hopper and safety cover over head, Hole plate diameter: Enterprise, E52, 130mm, Capacity: max 2000 kg/h, Hopper: 120 litre, Power: 3 x 400V, 8.6kW, Dimensions: 1550 x 950 x 1500 mm, Weight: 560 kg

SCHAUDT KRONOS LX200115 - 100 mm650 mm (plunge grinding)130 mmup to 60/100 kW12 kWSiemens SINUMERIK24 V DC117 kW196 A1800 m3/hmax. width 660 mm, bore 304.8 mm63 m/s (up to 120 m/s with CBN)max. width 660 mm, bore 203.2 mm5 - 700 rpm, stepless400 V AC, 50 Hz, 3AC/N/PEapprox. 14,000 kg (incl. control cabinet)3210 x 1460 x 2000 mm (base machine, without control cabinet)

Number of sanding units: 8 St. sanding width: 25-240 mm Sanding height max.: 15-140 mm B ROBA Fentech, Fully automatic sanding machine Designed for sanding individual wooden components in window manufacturing, it is suitable for the following applications: - Fine sanding of wood - Sanding after impregnation - Intermediate lacquer sanding Advantages of the ROBA Fentech system: - Automatic workpiece detection via scanner at the machine infeed - Motorized positioning of sanding units - Oscillating side units optimize abrasive utilization - 400 mm diameter sanding tools optimize sanding quality - Angled profiles are sanded at their optimal angle - Can be used as a straight-through machine or in reversing mode for one-person operation - Vacuum transport system for processing short parts - Enclosed design for enhanced workplace safety and a dust-free environment - Compact, space-saving design  ...

Operating voltage: 220/380 V Frequency: 50 Hz Connection: 500 W Grinding wheel diameter: 200 mm Width: 25 mm Auction-ID: A7-49089-408

Number of sanding units: 10 St. sanding width: 25-240 mm Sanding height max.: 15-140 mm MB ROBA Fentech ORBITAL, fully automatic sanding machine Designed for sanding individual wooden components in window manufacturing, it is suitable for the following applications: - Fine wood sanding - Impregnation sanding - Intermediate lacquer sanding Advantages of the ROBA Fentech principle: - Automatic workpiece detection via scanner at the machine infeed - Motorized positioning of sanding units - Oscillating side units optimize abrasive utilization - 400 mm sanding tool diameter optimizes sanding quality - Angled profiles are sanded at their optimal angle - Can be used as a through-feed machine or in reversing mode for one-person operation - Vacuum transport system for processing short parts - Enclosed design for enhanced workplace safety and a dust-free environment - Compact, space-saving design  ...

Serial number: 0703039.001 Operating voltage: 230/400 V Connection: 0.9 kW Rated current: 3.6/2.1 Speed: 2900 rpm Grinding wheel dimensions: 200 x 32 x 51 mm Auction-ID: A7-49089-477

Machine number: 2881 Operating voltage: 230 V Grinding wheel diameter: 400 mm Table dimensions: 550 x 340 mm Auction-ID: A7-49089-515

Technical details Type: Universal tool and cutter grinder Configuration: - Universal swivelling grinding head - Adjustable workhead - Tailstock with centre support - Longitudinal precision worktable - Manual longitudinal feed - Belt-driven grinding spindle - Cup grinding wheel - Dust extraction connection - Manual handwheel controls Application: - Tool and cutter sharpening - Milling cutter grinding - Drill sharpening - Reamer grinding - Arbor grinding - Precision toolroom operations Construction: - Heavy-duty cast-iron machine frame - Manual universal grinding machine Dimensions: - Length: Approx. 1700 mm - Width: Approx. 1300 mm - Height: Approx. 1650 mm Weight: Approx. 1400 kg Condition: Used Observed condition: - Machine appears mechanically complete - Grinding spindle installed - Workhead and tailstock present - Longitudinal guideways appear intact  ...

General Description Hydraulic precision surface grinding machine manufactured by BLOHM , model HFS 204 . Designed for precision surface grinding of tool steel, hardened components and precision mechanical parts. The machine is equipped with a hydraulic reciprocating table, automatic downfeed and Diaform wheel dressing system. Technical Details Manufacturer: BLOHM Model: HFS 204 Machine type: Hydraulic precision surface grinder Hydraulic reciprocating table BLOHM-Digit controller Vertical grinding spindle Automatic downfeed Diaform wheel dresser mounted on the wheelhead Separate electrical control cabinet Hydraulic power unit Coolant system Condition Used industrial condition. The machine appears complete with hydraulic table, BLOHM-Digit controller, vertical grinding spindle, Diaform wheel dresser, hydraulic power unit, coolant system and separate electrical cabinet.  ...

General Description Universal external cylindrical grinding machine manufactured by KSG , designed for precision external cylindrical and tapered grinding of shafts and other rotational workpieces. The machine is equipped with an external grinding wheelhead, workhead, tailstock, hydraulic table traverse and automatic grinding cycle. Technical Details Manufacturer: KSG Machine type: Universal cylindrical grinding machine Year: Not confirmed External grinding wheelhead Workhead Tailstock Hydraulic table traverse Automatic grinding cycle Separate electrical control cabinet Coolant system Permissible grinding wheel diameters: • Ø350–310 mm • Ø310–270 mm • Ø270–235 mm Grinding wheel spindle speeds: 1,700–2,200 rpm Condition Used industrial condition. The machine appears complete with workhead, tailstock, grinding wheelhead, hydraulic table traverse, co ...

General Description Vertical spindle rotary surface grinding machine designed for precision grinding of large flat components. The machine is equipped with a rotary electromagnetic chuck, hydraulic controls and a vertical grinding spindle for efficient surface grinding operations. Technical Details Machine type: Vertical spindle rotary surface grinder Rotary electromagnetic chuck Chuck diameter: 800 mm Vertical grinding spindle Wheelhead Hydraulic controls Operator control panel Electrical control cabinet Condition Used industrial condition. The machine appears complete with rotary electromagnetic chuck, grinding wheelhead, hydraulic controls and electrical cabinet. Operational status, spindle condition and grinding accuracy have not been tested. Auction-ID: A7-49124-45

Auction-ID: A7-49124-18

A Niles gear grinding machine is offered. Max. gear diameter: 630mm, gear width: 215mm, module range: 1-12, ram stroke rate range: 75-315 double strokes/min, stroke length: 225mm, number of teeth min./max.: 12/140, min. root diameter: 50mm, max. tip diameter: 630mm, table diameter: 500mm, workpiece dimensions X/Y/Z: 630mm/200mm/700mm, max. workpiece weight: 400kg, min./max. grinding wheel diameter: 250mm/350mm, grinding wheel bore: 127mm, grinding wheel width: 30mm, grinding wheel speed: 1690rpm, weight: approx. 6300kg. Including cabinet with change gears and counter support. Documentation available. Inspection by prior arrangement is possible.

A Niles gear grinding machine is offered. Module range: 2-14, table diameter: 630mm, workpiece dimensions X/Y/Z: 800mm/290mm/1500mm, min./max. generating grinding stroke: 20mm/280mm, ram stroke rate range: 20-280double strokes/min, min./max. number of teeth: 5/360, root diameter: 50mm, max. tip diameter: 800mm, min./max. grinding wheel diameter: 270mm/350mm, grinding wheel bore: 127mm, grinding wheel speed: 2450rpm, weight: approx. 10000kg. Including paper band filter, cabinet with change gears and oil mist extraction unit. Inspection possible by appointment.

A Höfler gear grinding machine is offered. Module range: 2-25, max. gear diameter: 1500mm, max. gear width: 720mm, min./max. generating grinding stroke: 60mm/750mm, ram stroke rate: 20-200double strokes/min, number of teeth: freely selectable, max. generating speed: 900mm/min, table diameter: 1000mm, distance between centers: 1250mm, min./max. grinding wheel diameter: 300mm/400mm, grinding wheel bore: 127mm, grinding wheel width: 45mm, weight: approx. 34t. Including paper band filter, counter support with steady rest and balancing unit. Documentation available. Inspection possible by prior arrangement.

TOS BDU 250A Internal and Face Grinder Machine Max. diameter of grinded hole: 250 mm Max. depth of grinding: 250 mm Max. workpiece diameter: 400 mm Max. swing: 470 mm Max. weight of workpiece: 100 kg Max. length of workpiece: 1000 mm Equipped with Face Attachment Total input: 9 kVA Machine weight : 3600 kg

Number of sanding units: 2 st. sanding width: 190 mm Sanding height max.: 4-180 mm HESS - GLORIA 2 BELT SINGLE WOOD SANDING MACHINE ----------------------------------------------------- Manufacturers description: ----------------------------------------------------- Compact design designed according to modern principles. Quiet and vibration-free operation thanks to rigid, stable machine housing and special insulation. Work safety device in accordance with the EC Machinery Directive with the dust-tested certificate. Offset grinding units with large-dimensioned tension rollers for good heat dissipation and stable sanding belt guidance. Sanding units with forced sanding belt oscillation. 2-point sanding dust extraction directly on the sanding roller. Airborne dust extraction on the large tension rollers. Integrated sanding belt blower for longer service life of the sanding belts. Integrate ...

Number of sanding units: 4 St. sanding width: 190 mm Sanding height max.: 180 mm Control: ja weight: 3300 kg Dimensions (L/W/H): 2600x920x1890 mm Dust suction hood: 2x180, 2x120 mm Löwer DSM 2004 Double-Sided Sanding Machine --------------------------------------------- 4-Belt Sander + Disc Unit (Top/Bottom) Manufacturers Description: --------------------------------------------- Double-sided, four-belt, single-wood sander for sanding solid wood such as window frames, etc. Highly stable, top-quality design with innovative details. Suitable for high continuous loads, even with high material removal rates. - Sequentially arranged grinding units for roughing, fine grinding, and finishing, each from above and below 1. Belt grinding unit with heavy steel roller 2. Belt grinding unit with rubberized roller and shoe 3. Finishing unit with fiber brush (see optional equipment below) - Direct-dri ...

Number of sanding units: 2 st. sanding width: 190 mm Sanding height max.: 4-150 mm Hess Junior single wood sanding machine -------------------------------- Machine in checking process at the moment! Basic structure: Stable, heavy welded construction made of thick-walled rectangular hollow profiles with additional, statically calculated reinforcements for optimal Vibration dampening. Staggered grinding units with large dimensions Belt drive drums for slip-free belt running. Two-point suction for direct and airborne dust extraction with integrated blow-off device. grinding units in heavy steel plate construction as the basis for vibration-damped, quiet tape running. All guides as a ball linear set on hardened and polished waves. Permanent precision thanks to dust and dirt protection the ball linear sets. Contact roller and sanding pad in a balanced ratio for sanding belt grain load. The la ...

CONTROLS   electronic controls WORKING RANGE SURFACE GRINDING   grinding length: 600 mm   grinding width: 200 mm TABLE (SURFACE GRINDING)   magnetic table: yes MAGNETIC TABLE   length: 600 mm   width: 200 mm   weight: 100 kg SPINDLESTOCK GRINDING SPINDLE   spindle revolutions (max): 4200 /min GRINDING TOOL   type of grinding tool: wheel   diameter (max): 250 mm   borehole: diameter: 51 mm   width: 25 mm ELECTRICAL SPECIFICATIONS   total power consumption: 7.5 kW   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 3000 mm   space requirements -front/back-: 2540 mm   total height: 1850 mm   total weight approx.: 2000 kg

CONTROLS   CNC controls SIEMENS 840 D WORKING RANGE SURFACE GRINDING   grinding length: 1000 mm   grinding width: 600 mm   vertical travel: 350 mm TABLE (SURFACE GRINDING)   table surface (left-right): 1360 mm   table surface (front-back): 550 mm   workpiece load (max): 1000 kg SPINDLESTOCK GRINDING SPINDLE   spindle revolutions (min): 1000 /min   spindle revolutions (max): 6500 /min GRINDING TOOL   type of grinding tool: wheel   diameter (min): 500 mm   borehole: diameter: 203 mm   width: 100 mm ELECTRICAL SPECIFICATIONS   total power consumption: 91 kW   mains voltage: 400 V   mains frequency: 50 Hz ATTACHMENTS (GRINDING)   coolant unit: yes - 4500 operating hours - Very good and well-maintained condition - Machine body: Meehanit cast iron - Linear guides - Diamond dressing roller: Ø135x100x52 - Automatic balancing system - Programmable slow, fast,  ...

CONTROLS   electronic controls WORKING RANGE SURFACE GRINDING   grinding length: 600 mm   grinding width: 350 mm   distance of axis of horizontal spindle - clamping surface (max.): 640 mm TABLE (SURFACE GRINDING)   table surface (left-right): 1320 mm   table surface (front-back): 300 mm MAGNETIC TABLE   length: 600 mm   width: 300 mm SPINDLESTOCK GRINDING SPINDLE   spindle revolutions (min): 1440 /min   spindle revolutions (max): 2880 /min   continuous speed variation: yes   drive power: 7.5 kW GRINDING TOOL   type of grinding tool: wheel   diameter (min): 300 mm   diameter (max): 450 mm   width: 80 mm DIMENSIONS / WEIGHTS   space requirements -left/right-: 2200 mm   space requirements -front/back-: 1900 mm   total height: 2000 mm   total weight approx.: 3450 kg ATTACHMENTS (GRINDING)   coolant unit: yes

DISKUS DD 300 So ist eine Doppel-Planschleifmaschine, ausgelegt auf Präzision, hohe Genauigkeit und Zuverlässigkeit. Kapazitäten: Werkstückhöhe max. 80 mm; 2 Schleifköpfe; Schleifscheibe Ø außen 300 mm, Ø innen 233 mm, Breite/Höhe 50 mm; waagrecht; Mitnehmerscheibe Geschw. 29,6–192 mm/s. Technische Daten: Schleifscheibendrehzahl von 1530 t/min bis 24 m/s; Spannung 380 V; Gewicht ca. 2500 kg; Abmessungen L3050×B1400×H1600 mm. Zubehör: Messgerät PRETEC. Erreicht enge Toleranzen; geeignet für präzisionsorientierte Branchen (z. B. Automotive, Werkzeugmaschinen, Luftfahrt, Medizintechnik, Uhrmacher). Technische Daten ohne Gewähr

DISKUS DD 400 II CRM ist eine Doppel-Planschleifmaschine, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Werkstückhöhe max. 80 mm; Schleifbreite 40 mm; Schleifscheiben Ø außen 400 mm, Ø innen 250 mm; Breite/Höhe 50 mm. Drehzahlen 135–1435 t/min (Umf. 24 m/s) und links 1150 t/min (3–30 m/s); Vorschub 26–246 mm/s; 380 V; install. Leistung 30 kW; Gewicht ~4200 kg; Maschine 3300×2600×2300 mm; Elektroschrank 1800×400×2000 mm. Zubehör: Kühlmitteleinrichtung, Abrichtvorrichtung, Messgerät IONIC, Werkstücklader, automatische Be-/Entladeeinrichtung, Satz Schleifscheiben, Lampe. Erzielt enge Toleranzen; geeignet für Automotive, Luftfahrt, Werkzeugmaschinenbau, Medizintechnik und Uhrenbranche. Technische Daten ohne Gewähr

DISKUS DDS 457 II CRA ist eine Doppel-Planschleifmaschine mit 2 gegenüberliegenden Schleifscheiben, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Bearbeitungsbereich: Werkstückdurchmesser 5–60 mm, max. Höhe 1–20 mm; zwei Schleifköpfe doppelseitig (oben, unten). Technische Hauptdaten: Schleifscheiben Ø457×B75 mm, Aufnahmebohrung 76 mm; feste Drehzahl 753 t/min, Umfangsgeschw. 18 m/s; Spannung 380 V; Schleifmotoren 2×15 kW; install. Leistung 33 kW; Gewicht ~5000 kg; Abmessungen L4000×B3000×H2700 mm. Eignet sich für enge Toleranzen in Automobilindustrie, Luftfahrt, Maschinenbau, Medizintechnik und Uhrmacherei. Technische Daten ohne Gewähr

DISKUS DDS 600 ist eine Doppel-Planschleifmaschine mit 2 gegenüberliegenden Schleifscheiben, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Arbeitsvermögen: Werkstückdurchmesser 120 mm, max. Werkstückhöhe 50 mm; 2 Schleifköpfe, doppelseitig (oben, unten); Segmentscheibe Außendurchmesser 600 mm, Breite/Höhe 75 x 150 mm. Technische Daten: Schleifscheibendrehzahlen ab 765 t/min (entspricht 24 m/s), Spannung 380 V, Maschinengewicht ca. 6500 kg; Abmessungen L 3410 x B 3370 x H 3100 mm. Erreicht enge Toleranzen; typische Einsatzbereiche: Automotive, Werkzeugmaschinenbau, Luftfahrt und Medizintechnik Technische Daten ohne Gewähr

WORKING RANGE CYLINDRICAL GRINDING   swing diameter (max): 515 mm   workpiece weight between centers (max): 500 kg   workpiece weight flying (max): 120 kg WORKING RANGE EXTERNAL GRINDING   grinding diameter (max): 515 mm   grinding length: 1500 mm TABLE -CYLINDRICAL GRINDING-   tilting range (B-direction) min: 8.3 °   rotating range B-axis up to: -4 °   longitudinal travel: 1680 mm WORKPIECE SPINDLESTOCK   spindle revolutions (min): 14 /min   spindle revolutions (max): 114 /min   number of gears: 2   drive power: 1.5 kW   tool fixture: MK 6 TAILSTOCK   sleeve stroke: 40 mm   taper: MK 5 SPINDLESTOCK GRINDING SPINDLE   tilting range (B-direction) min: -10 °   rotating range B-axis up to: 10 °   drive power: 15 kW GRINDING TOOL   type of grinding tool: wheel   diameter (max): 630 mm   borehole: diameter: 203.2 mm   width: 125 mm DIMENSIONS  ...

Technical Parameters Category: Used butchering machines Subcategory Mechanical processing of meat Genus Butcher Wolves Height 2100 mm Width 1200 mm Length 1800 mm Weight 1800 kg Capacity 22000 kg/h Electrical Supply: 400V 50Hz 3N Total power 75 kW No loading, possibility to buy additional pole loading for the machine Throat diameter 280 mm Wolf type Straight wolf Auger Stuffing Feeding System Hopper

CONTROLS   CNC controls SIEMENS 840 D WORKING RANGE SURFACE GRINDING   grinding length: 1600 mm   grinding width: 900 mm   workpiece height (max) with largest wheel: 600 mm   number of processing axes (excl parallel axes): 3 TABLE (SURFACE GRINDING)   table surface (left-right): 1600 mm   table surface (front-back): 800 mm SPINDLESTOCK GRINDING SPINDLE   X-axis travel: 1700 mm   spindle revolutions (max): 1000 /min GRINDING TOOL   type of grinding tool: wheel   diameter (max): 500 mm   borehole: diameter: 203.2 mm   width: 100 mm ELECTRICAL SPECIFICATIONS   total power consumption: 30 kW   mains voltage: 400 V   mains frequency: 50 Hz

Cylindrical grinding machine Type: BUC 63 B/2000 Manufacturer: TOS Year: 1993 Never used Max. grinding diameter: 630 mm Max. grinding length: 2,000 mm Machine weight: 13 t Magnetic cleaner In very good condition, never used in production, preserved. Find more here - .ucymachines/ Contact us at - sales@ucymachines

Suitable for cutting and sanding masonry, concrete and steel Auction-ID: A7-49495-223

Bench grinder and sander ideal for polishing, deburring, edge chamfering and finishing. Auction-ID: A7-49495-269

Polishing and Bench Grinder METABO Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Viewing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

Compact double grinding bench for sharpening, finishing and deburring work in the workshop. Thanks to its simple and robust design, this machine is an indispensable piece of equipment for tool maintenance and metalworking. Its compact size allows for easy integration on a workbench, making it a convenient solution for: Mechanical workshops Industrial maintenance craftsmen General mechanics precision work Ideal for supplementing a workshop station with a versatile tool that can be used immediately. Auction-ID: A1-48554-38

The air grinder is a great tool for grinding/grinding, deburring, shaping/milling, and engraving on a variety of different materials. Auction-ID: A7-49495-196