drill grinder used for sale

CICERI MMVM 135 A ist eine Ständerbohrmaschine, ausgelegt für Präzision, hohe Genauigkeit und zuverlässigen Betrieb. Hauptarbeitsdaten: Abmessungen Länge 1200 mm, Breite 800 mm, Höhe 2400 mm; Maschinengewicht ca. 600 kg. Technische Eckdaten: Gewicht und Abmessungen wie angegeben. Ermöglicht enge Toleranzen und eignet sich für Branchen wie Automobil, Uhrenindustrie, Werkzeugmaschinenbau, Luftfahrt und Medizintechnik Technische Daten ohne Gewähr

SERRMAC TCO 28 ist eine Ständerbohrmaschine für präzise Bearbeitung, hohe Genauigkeit und Zuverlässigkeit. Wichtige Arbeitsdaten: Tisch 325 x 325 mm, Bohrleistung in Stahl 28 mm, Spindelaufnahme MK: 3, Tisch-/Spindelnasen-Abstand 690 mm, Spindeldrehzahlen 205–2100 t/min. Technische Daten: Anschluss 3x 400 V 50 Hz, Spindelmotor 1,1–1,5 kW, Maschinengewicht ca. 400 kg, Abmessungen L1200 x B800 x H2000 mm. Erzielt enge Toleranzen; typische Einsatzbereiche: Automotive, Feinmechanik, Luft- und Raumfahrt, Medizintechnik. Technische Daten ohne Gewähr

BLOESCH Perceuse 3 têtes Nr. 22 ist eine Reihenbohrmaschine, ausgelegt auf hochpräzise Bearbeitung mit hoher Genauigkeit und Zuverlässigkeit. Konkrete Angaben zu Bohrdurchmessern, Verfahrwegen oder Werkstückgrößen liegen nicht vor. Technische Daten wie Spindeldrehzahlen, Vorschubwerte, Stromversorgung, Abmessungen oder Gewicht sind nicht angegeben. Entwickelt für enge Toleranzen, geeignet für Branchen mit hohen Präzisionsanforderungen wie Automobil, Uhrenindustrie, Werkzeugmaschinen, Luft- und Raumfahrt und Medizintechnik Technische Daten ohne Gewähr

BLOESCH Perceuse 2 têtes Nr. 23 ist eine Reihenbohrmaschine, ausgelegt auf Präzision, hohe Genauigkeit und Zuverlässigkeit. Es sind keine Arbeitskapazitäten oder technischen Daten angegeben. Sie ermöglicht enge Toleranzen und eignet sich für Branchen wie Automobil, Uhrmacherei, Werkzeugmaschinenbau, Luft- und Raumfahrt sowie Medizintechnik. Technische Daten ohne Gewähr

CUOGHI MICRA 10 INTEGRAL ist eine Bohrerschleifmaschine für Präzision, hohe Genauigkeit und Zuverlässigkeit. Arbeitsbereich: Bohrerdurchmesser 0,5–6,35 mm; Spitzwinkel 80–180°; Schleifscheibe Ø70 mm, Breite 30 mm, Bohrung 25/10 mm. Technische Daten: Drehzahl bis 7.100 t/min; Anschluss 50 Hz 3x 220/380 V; Gewicht ~50 kg; Maße L825 × B750 × H1500 mm. Zubehör: Satz Spannzangen, Lampe, Werkzeugschrank, optische Kontrolle 16x. Erzielt enge Toleranzen; geeignet für Automotive, Uhrenindustrie, Werkzeugmaschinen, Luftfahrt und Medizintechnik. Technische Daten ohne Gewähr

PROMAC FX 381 C ist eine Bohr-/Fräsmaschine für präzise, hochgenaue und zuverlässige Bearbeitung. Tisch 660×190 mm; Bohrleistung Stahl Ø25 mm; Pinolenhub 110 mm; Verfahrwege X360 Y160 mm. Spindelaufnahme MK3; 12 Stufen 90–2150 t/min; Spindelmotor 0,75 kW; 50Hz 3×230V; Gewicht 205 kg; Abmessungen 980×880×1060 mm. Zubehör: Bohrfutter. Eignet sich für enge Toleranzen; Branchen: Automotive, Luftfahrt, Medizintechnik, Uhrenbau, Maschinenbau. Technische Daten ohne Gewähr

FEHLMANN P 18 S ist eine Tischbohrmaschine, die durch Präzision, hohe Genauigkeit und Zuverlässigkeit überzeugt. Angaben zu Arbeitskapazitäten (Durchmesser, Verfahrwege oder Werkstückgrößen) liegen nicht vor. Detaillierte technische Daten (Spindeldrehzahlen, Stromversorgung, Abmessungen, Gewicht) sind nicht angegeben. Entwickelt, um enge Toleranzen zu erreichen; geeignet für Werkstätten, Uhrmacherei, Prototypenbau und Instandhaltung. Technische Daten ohne Gewähr

ACIERA 10 T ist eine Tischbohrmaschine, ausgelegt für präzises Bohren mit hoher Genauigkeit und Zuverlässigkeit. Bohrleistung in Stahl: 10 mm; Tisch 300×230 mm; Ausladung 200 mm; Pinolenhub 100 mm; Abstand Tisch-Spindelnase 30–330 mm. Spindeldrehzahlen: 12 Stufen 200–5000 t/min; Anschluss 3x 380 V 50 Hz; Leistung 1 CV; Maschinengewicht ca. 110 kg; Abmessungen L800×B550×H600 mm. Erzielt enge Toleranzen; geeignet für Automotive, Uhrenindustrie, Maschinenbau, Luftfahrt und Medizintechnik Technische Daten ohne Gewähr

: neu : ca. 8 Wochen ab Auftragse : Spanien : 6840 € : 132.01 € : 25 mm : MK 3 : 250 mm : 245 - 4000 U/min : 0,7 / 1,3 kW kW : M18 : 400 mm : 655 mm : 1900 mm : 280 kg : 120 mm : 100 mm : 85 - 635 mm : 1.195 mm : 300 x 270 mm : 600 x 380 mm ERLO(MADE IN SPAIN) FOR MANUFACTURING USE V-belt drive manual feed left-right drilling tool ejector adjustable depth stop table with T-slots drill guard with micro switch lightening equipment user manual in English or GERMAN CE OPTIONS (PRICES ON REQUEST): Variable speed incl. digital display (VE+TAK) Tapping device (IR/RS) Coolant equipment incl. T-slots in the ground plate (ERB) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6-8 Wochen ab Auftrag : Spanien : 8970 € : 173.12 € : 30 mm : MK 3 : 250 mm : 65 - 3.060 (8) U/min : 380 mm : 600 mm : 2060 mm : 260 kg : 100 mm : 170 - 660 mm : 1.216 mm : 300 x 270 mm : 600 x 380 mm ERLO(MADE IN SPAIN) FOR MANUFACTURING USE High quality geardrive machine 2 automatical feed Left-right drilling Automatic tool ejector Adjustable depth stop Table with T-slots Drill guard with micro switch Lightening equipment User manual in English or GERMAN CE OPTIONS (PRICES ON REQUEST): coolant equipment with T-slots in base plate ERB Reverse for tapping IR/RS The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 16900 € : 324.48 € : 32 mm : MK 4 : 220 - 950 mm : 73 - 1.247 (6) U/min : Stahl: M 25, Guss: M 32 : 1800 mm : 830 mm : 2190 mm : 1250 kg : 350 - 1.210 mm : 0,05 - 0,15 (3) mm/min : 1.5 kW : 210 mm : 220 mm : 1.260 x 640 x 160 mm : 0,75 kW : 600 x 445 x 380 mm : 2320 mm left/right rotation automatic feed drilling depth limit manual headstock adjustment with mechanical clamping electric height adjustment of extension arm and mechanical clamping mechanical clamping of swivel movement of extension arm central operation panel on the front side power load readout for drilling spindle hand wheel for spindle fine feed coolant equipment machine lamp box table machine and equipment according to the CE-regulations operating manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Spanien : 10930 € : 209.86 € : 35 mm : MK 4 : 300 mm : 132-194-277-319-466-666-8 U/min : 1.5 kW : M27 : 755 mm : 480 mm : 2205 mm : 385 kg : 125 mm : 90 - 890 mm : 1250 mm : 400 x 420 mm : 150 mm Manual feed Geared drive Hardened and ground high quality steel gears Speed plate and selecting levers on head front Depth scale and adjustable depth stop Thermomagnetic switch Emergency STOP push button Spindle reversing switch Worklight Fixed table Safety drill guard with microswitch CE mark OPTIONS (PRICES ON REQUEST): Electronic speed variator with speed digial reader (VE+TAK) A) 66-211 B) 97-310 C) 138-443 D) 160-510 E) 233-746 F) 333-1066 G) 440-1413 H) 648-2074 I) 926-2963 Depth digital reader(LBC) Manual tapping system (IR/RS) Manual tapping system for models with variator(IR/RS-VE) Rotating and tilting table(MGI) Coolant equipment with T-sl ...

: neu : 2025 : 030140 : prompt, Zwischenverkauf v : Deutschland : 13429.36 € : 257.84 € : 1 : 30 mm : MK 3 : 280 mm : Stufe 1: 125 - 4000, Stuf U/min : 0,9 / 1,45 kW kW : M20 : 820 mm : 520 mm : 1900 mm : 320 kg : 0 - 300 mm/U : 240 - 790 mm : 420 x 340 mm : 125 mm Drilling capacity / normal drilling performance25/30 (in E335/ST60) Automatic feed Digital speed-, drilling depth and feed display Drilling depth adjustment with fine adjustment and undervoltage trigger EMERGENCY STOP pushbutton Stepless speed control Table height adjustment via toothed rack Connection cable (1.5 m) with CEE plug Drill protection with electr. Fuse Thermal overload protection Electronically infinitely variable feed incl. Spindle monitoring Free cutting device Thread cutting device, thread cutting capacity max. M20, setting the thread cutting depth via digital depth display Drilling depth shut-off, programma ...

: neu : ca. 2 - 4 Wochen ab Auftr : Polen : 1445 € : 19 mm Weldon : 1 kW : 307 mm : 221 mm : 317 mm : 135 kg : 36 mm : 51 mm : 70 mm : 350 U/min : 6 mm New PRO-36 AUTO is equipped with unique LED monitoring system that indicates current condition of the drill and gives additional safety and diagnostic information. Auto Feed Smart Drive System optimizes parameters for each cutting/milling operation, when drill works in automatic mode. The drill controller keeps choosing the most effective working conditions based on the correlation of motor load, feed speed and the range of allowable cutting parameters for a given tool type and hole diameter. It results in extending tool life of both HSS and TCT cutters and enhanced machine performance. Countersinking and working on thin workpieces, when the LED shows that the clamping force is low (flashing green) are possible in manual mode only. A sa ...

: neu : ca. 2 - 4 Wochen ab Auftr : Deutschland : 2625.31 € : 10 mm : B 16 : 220 mm : 60 - 6000 U/min : 0,54 kW : 350 mm : 520 mm : 820 mm : 44 kg : 60 mm : 140 - 315 mm : 300 x 250 mm : 70 mm Drilling capacity / normal drilling Performance 10/12 (in E335/ST60) Thread cutting device Control panel with OLED display Robust, high quality drill head hood with ergonomically inclined front LED lighting Quickly adjustable and ergonomic Drilling depth stop Stepless speed control via central rotary knob EMERGENCY STOP pushbutton Thermal overload protection Spindle stop Drill protection with electr. Fuse Connection cable with Schuko plug 3 years warranty for single shift Operation OPTIONS (PRICES ON REQUEST): Machine cabinet with door and drawer Drill package 2 (vice &, keyless chuck) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 2 - 4 Wochen ab Auftr : Polen : 1055 € : 12 mm : 19 mm Weldon : 1.1 kW : 400 mm : 126 mm : 185 mm : 10 kg : 12 mm : 40 mm : 40 mm : 45 mm : 370 U/min : 6 mm PRO-40 AD is a low profile mag drill, that fits in the tightest of spots. Perfect solution for any applications in confined spaces, wheretypical mag drills are too large. Its powerful motor enables drilling of holes up to 40 mm (1-9/16”) in diameter and up to 40 mm (1-9/16”) deep. An innovativeultra-strong magnetic base with high performance on air gaps makes it possible to work even on painted, rusted or thin surfaces. Magnetic Power Adhesion Control (MPAC) protects both the drill and the operator from working on too thin or inadequate surfaces, preventing the motor from engaging if the adhesive force is dangerously low. PRO-40 AD accepts both TCT and HSS cutters as well as twist drill drills with 19,05 mm (3/4”) ...

: neu : ca. 2 - 4 Wochen ab Auftr : Deutschland : 3649.63 € : 15 mm : MK 2 : 220 mm : 40 - 4000 U/min : 0,75 kW : M12 : 400 mm : 520 mm : 850 mm : 65 kg : 70 mm : 85 - 370 mm : 300 x 250 mm : 70 mm Drilling capacity / normal drilling Performance 15/18 (in E335/ST60) 17 Nm Thread cutting system Control panel with OLED display Robust, high quality drill head hood with ergonomically inclined front LED lighting Quickly adjustable and ergonomic Drilling depth stop Stepless speed control via central rotary knob EMERGENCY STOP pushbutton Thermal overload protection Spindle stop Drill protection with electr. Fuse Connection cable with Schuko plug 3 years warranty for single shift operation OPTIONS (PRICES ON REQUEST): Machine cabinet with door and drawer Drill package (vice &, keyless chuck) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 2 - 4 Wochen ab Auftr : Deutschland : 6939.26 € : 133.93 € : 20 mm : MK 2 : 260 mm : 30 - 3000 U/min : 1,5 kW : M12 : 430 mm : 715 mm : 1800 mm : 290 kg : 100 mm : 110 mm : 230 - 850 mm : 420 x 340 mm Drilling capacity / normal drilling Performance 20/23 (in E335/ST60) Main switch Tapping attachement Control panel with OLED display Robust, high quality drill head hood with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drill depth stop Stepless speed control via central rotary knob EMERGENCY STOP pushbutton Thermal overload protection Spindle stop Drill protection with electr. Fuse Connection cable with CEE plug 3 years warranty for single shift operation Art. - No. 223.020 R1 (20-2,000 1/min) Art. - No. 223.025 R2 (30-3,000 1/min) OPTIONS (PRICES ON REQUEST): Drill package 3 (vice &, keyless chuck) Coolant device LED lighting with pivot arm ...

: neu : ca. 2 - 4 Wochen ab Auftr : Deutschland : 7035.46 € : 135.78 € : 25 mm : MK 3 : 280 mm : 125 - 4000 (2 Stufen) U/min : 0,9 / 1,45 kW : M20 : 520 mm : 820 mm : 1900 mm : 275 kg : 125 mm : 110 mm : 240 - 790 mm : 420 x 340 mm Drilling capacity / normal drilling performance 25/30 (in E335/ST60) Drilling depth adjustment with fine adjustment Emergency stop pushbutton Undervoltage release electr. Drilling machine guard Manual reversing switch for clockwise and anticlockwise rotation Connection cable (1.5 m) with CEE plug Thermal overload protection OPTIONS (PRICES ON REQUEST): Drill package (vice &, keyless chuck) Coolant device LED lighting with pivot arm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 2 - 4 Wochen ab Auftr : Deutschland : 8144.6 € : 157.19 € : 25 mm : MK 3 : 280 mm : 125 - 4000 (2 Stufen) U/min : 0,9 / 1,45 kW : M20 : 520 mm : 820 mm : 1900 mm : 275 kg : 125 mm : 110 mm : 240 - 790 mm : 420 x 340 mm : 125 mm Drilling capacity / normal drilling performance 25/30 (in E335/ST60) Drilling depth adjustment with fine adjustment Digital drilling depth and speed display Emergency stop pushbutton Undervoltage release electr. Drilling machine guard Manual reversing switch for clockwise and anticlockwise rotation Connection cable (1.5 m) with CEE plug Thermal overload protection OPTIONS: Drill package (vice &, keyless chuck) Coolant device LED lighting with pivot arm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 50 mm arm length: 1250 mm workpiece height max.: mm total power requirement: 4 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

drill diameter: 50 mm total power requirement: 2,2 kW weight of the machine ca.: 0,6 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Max. drilling diameter in steel, strength 600MPa: 50mm, max. drilling diameter in cast iron, strength 250MPa: 60mm, max. boring diameter (with guide) in steel, 600MPa: 200mm, max. thread in steel, 600MPa: M50x1.5, max. thread in cast iron, 250MPa: M60x2, spindle reach: 320-1250mm, pitch circle of holes: 1208-3039mm, distance from spindle axis to base plate: 320-1380mm, max. arm height adjustment: 750mm, max. drill carriage travel on arm: 930mm, arm swivel range: +/-180°, spindle head diameter: 75h6, spindle diameter at front bearing: 55mm, length: 2900mm, width: 1120mm, height: 3271mm, weight: 4.2t, with documentation. An on-site inspection is possible.

Drilling process: single-lip gundrilling, operating method: rotating tool, number of working spindles: 1, nominal drilling depth: approx. 750mm, drilling range for solid drilling in steel: approx. 30mm, drilling range for counterboring in steel: approx. 40mm, spindle drive: 11kW, max. spindle speed range I: 1800rpm, max. spindle speed range II: 5700rpm, max. feed rate range I: 320mm/min, max. feed rate range II: 160mm/min, rapid traverse: 3.5m/min, clamping table X/Y: 420mm/1280mm, cross-slide table manually operated, max. transverse travel: 400mm, table clamping surface X/Y: 600mm/600mm, high-pressure coolant system for deep-hole drilling oil with 1000l coolant tank, flow rate: approx. 2-94l/min, max. pressure at max. flow rate: 45bar, pump power: 11kW, separate control cabinet. The machine underwent an extensive partial overhaul in 2018, during which the machine was disassembled and cl ...

Gear drill without belt change Very quiet and quiet running - Drilling performance in steel ST 60 30 mm - Drilling spindle holder MK 3 - Drilling spindle stroke 160 mm - 9 drilling spindle speeds 90 - 1450 rpm - Projection 300 mm - Table with 2 T-slots - Table dimensions swivel 500 x 450 mm - Table dimensions base plate 350 x 400 mm - Distance from base plate to spindle nose 1100 mm - Max. distance table - drilling spindle 660 mm - Height adjustable via rack with hand crank - Column diameter 120 mm - Drive 380 V / 1.2 kW - Space requirement approx. W 600 x H 2100 x D 670 mm - Weight approx. 350 kg - With drill chuck

Key data: 90 mm, 1250 mm, 900 mm

Manufacturer: TOS Model No.: WHN 9B Condition: Used Stock number: 9427 Work table length: 1120 mm Work table width: 1000 mm Maximum table load (uniform): 3000 kg X-axis travel: 1250 mm Y-axis travel: 900 mm Travel Z axis: 1000 mm Machine weight: 12000 kg

Machine number: 32250 Throat: approx. 1300 mm Speed: up to 1800 rpm Table dimensions: 1570 x 440 mm with one groove incl. matching accessories and documentation as well as gripper arm Auction-ID: A7-49089-373

: neu : ca. 2 - 4 Wochen ab Auftr : Deutschland : 15441 € : 296.47 € : 40 mm : MK 4 : 300 mm : 1,5 / 3,0 kW : M30 : 610 mm : 850 mm : 1920 mm : 440 kg : 0 - 300 mm/U : 160 mm : 125 mm : 150 - 700 mm : 590 x 450 mm Display with the following functions: - Selection of operating mode: manual drilling / drilling with feed / tapping - Spindle speed - Feed rate - Zero point setting - Drilling depth - Piece counter - Chip breaking mode - Jump switch mode (for efficient drilling of square tubes) - Spindle stop (automatically stops the spindle after the drilling cycle) - Free cutting time mode Drilling capacity / normal drilling performance 35/40 (in E335/ST60) Automatic feed Drilling depth adjustment with fine adjustment and undervoltage trigger EMERGENCY STOP pushbutton Stepless speed control Connection cable (1.5 m) with CEE plug Drill protection with electr. Fuse Thermal overload protecti ...

: neu : ca. 2 - 4 Wochen ab Auftr : Deutschland : 3649.63 € : 15 mm : B 16 : 214 mm : 40 - 4000 U/min : 0,54 kW : M10 : 355 mm : 485 mm : 1027 mm : 70 kg : 125 - 490 mm : 300 x 250 mm : 82 mm THE HEIGHT-ADJUSTABLE HEAD MAKES IT IDEAL FOR SHORTER USERS, E.G., FOR TRAINING WORKSHOPS AND SCHOOLS PLUS - CONTROL PANEL - Drilling mode / Tapping mode - Zero point setting - Drilling depth adjustment - Infinitely variable speed adjustment - Piece counter - Spindle stop function (spindle stops automatically after drilling) Drilling capacity / normal drilling Performance 13 / 15 (in E335/ST60) Manal feed Tapping device Control panel with OLED display Robust, high quality drill head hood with ergonomically inclined front Head height adjustment via toothed rack LED lighting Quickly adjustable and ergonomic drill depth stop Stepless speed control via central rotary knob EMERGENCY STOP pushbutton The ...

Control: SIEMENS drilling diameter: Ø 3 - 25 (18) mm turning speeds: 1000 - 6100 U/min bore slide stroke: 850 mm bore depth: 550 mm spindle distance: 240 mm dimensions: ca. 6 5 2,3 m Shipping weight: ca. 6000 kg Packing: ca. 10 Lademeter m : The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 160 mm x-travel: 8000 mm y-travel: 4000 mm z-travel: (RAM) 1000 mm W-axis (spindle longitudinal): 800 mm Control: Heidenhain iTNC 530 tool taper: ISO 50 DIN 69871 spindle turning speed range: 5 - 2500 U/min spindle drive motor: 40 kW max. torque on the spindle: 2024 Nm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Working hours (February 2026): - Machine on: 27.315 h - Autom. cycle: 11.533 h CNC-control HEIDENHAIN iTNC 530 30-pos. ATC Floor plates 8000 x 4000 mm Coolant equipment with coolant through spindle Swarf conveyor Angular milling head with adapter movable operators platform Documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 125 mm x-travel: 3000 mm y-travel: 2000 mm z-travel: 1500 mm W-axis (spindle longitudinal): 600 mm table-size: 1250 x 1600 mm table load capacity - central/maximum: 5000 kg Control: Heidenhain iTNC 530 tool taper: ISO 50 spindle turning speed range: 5 - 3000 U/min spindle drive motor: 37 kW max. torque on the spindle: 1646 Nm transmission ratio: 2 total power requirement: kW weight of the machine ca.: 23 t dimensions of the machine ca.: 6830 x 6615 x 7200 mm Working hours: - Machine on: 59.078 h - Autom. cycle: 24.207 h CNC-control HEIDENHAIN iTNC 530 Coolant equipment Table B-axis, 360.000 positions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 105 mm, 1800 mm, 1250 mm

Control Heidenhain ... TNC 430 Spindle diameter ... 105mm Axis X ... 1800mm Axis Y ... 1250mm Spindle speed ... 0-3300 rpm Axis W ... 630mm Axis Z ... 1250mm ISO 50 Max. table load ... 4000kg Clamping table surface ... 1250 x 1400mm The machine is in good condition, possible to test under power.

Key data: 18 mm

The machine has three separate drilling spindles, which means that several holes or different machining steps can be carried out efficiently one after the other. It is therefore particularly suitable for use in industrial production, mechanical engineering, workshops and recurring drilling work. The machine is mounted on a stable work table and has a generous work surface. The integrated protective panels with viewing windows allow for a protected work area while providing a good view of the workpiece. Below the work surface there are additional storage and storage options. Design: 3-spindle in-line drilling machine 3 drilling spindles for efficient machining Robust, industrial construction Large integrated work surface Protective cladding with viewing windows Operation directly at the individual drill heads Integrated base with drawers/storage compartments Suitable for seri ...

Year of manufacture 1989 4 drilling spindles Adjustable drill spindle spacing electr. Drive electr. Footswitch Delivery date: immediately from stock

X-axis: 500mm, y-axis: 430mm, z-axis: 400mm, table dimensions: 510x450x410mm, max. table load: 250kg, angular clamping table: 800x390mm, feed rate x-/y-axis: 4-1600mm/min, z-axis: 4-1000mm/min, feed force: 5000N on all axes, rapid traverse x-/y-axis: 1.6m/min, z-axis: 1m/min, tool holder (DIN 2079): ISO 40, cutter drawbar thread: M16, hydromechanical tool clamping: 12,000Nm, quill stroke: 80mm, drive power: 3kW, 18-speed sliding-gear transmission: manually or automatically selectable, torque: 5Nm, spindle speed: 50-2500rpm, connected load: 6kW, control: Heidenhain TNC 114B (hand control type HS262), display resolution: 0.005mm, length: 1400mm, width: 1300mm, height: 1830mm, weight: 1.6t, space requirement: 2300x2300x2400mm, equipment: machine light, coolant tank: 18l, external coolant supply: 3bar, various tool holders, spindle tool. On-site inspection is possible.

Offer 26231 Technical data: - Drilling capacity in steel St 60 45 mm - Drilling capacity in steel St 60 55 mm - Drilling spindle holder long spindle MK 4 - Drilling spindle speeds AZ gearbox infinitely variable in 2 speed series - 40 - 760 rpm - Drilling spindle stroke 140 mm - Projection 300 mm - Column diameter 145 mm - Table with 2 T-slots 460 x 420 mm - Distance table-drilling spindle min / max 35 / 640 mm - Drill spindle – machined base plate approx. 1150 mm - 3 feeds 0.10 - 0.20 mm/rev - Drive 400 V / 1.8 / 2.9 kW - Keyless chuck - Machine vise - Space requirement approx. W 600 x H 1800 x D 950 mm - Weight approx. 380 kg

Offer 26231 Technical data: - Drilling capacity in steel St 60 45 mm - Drilling capacity in steel St 60 55 mm - Drilling spindle holder long spindle MK 4 - Drilling spindle speeds AZ gearbox infinitely variable in 2 speed series - 40 - 760 rpm - Drilling spindle stroke 140 mm - Projection 300 mm - Column diameter 145 mm - Table with 2 T-slots 460 x 420 mm - Distance table-drilling spindle min / max 35 / 640 mm - Drill spindle – machined base plate approx. 1150 mm - 3 feeds 0.10 - 0.20 mm/rev - Drive 400 V / 1.8 / 2.9 kW - Keyless chuck - Machine vise - Space requirement approx. W 600 x H 1800 x D 950 mm - Weight approx. 380 kg

ALZMETALL AX 4 / SV Säulenbohrmaschine 3KW Hersteller: Alzmetall Typ: AX 4 / SV Zustand: Vorführmaschine / unbenutzt Baujahr: 2024 Bohrvermögen Stahl E335 (St 60) 55 mm Gewindeschneiden Stahl E335 (St 60) M 42 Guss EN-GJL-200 M 56 Kurzspindel MK 4 Spindelhub 140 mm Nutzbare Ausladung 300 mm Säulendurchmesser 145 mm Maschinentisch, nutzbare Auflage 615 x 430 mm Abstand Spindel-Tisch min./max. 150/735 mm T-Nuten, Anzahl x Breite x Abstand 2 x 14 x 224 mm Vorschub 0,1 + 0,3 mm/U Maschinenhöhe ca.1850 mm Nettogewicht ca.380 kg Antrieb stufenlos Motor 1500 U/min Leistungn 3,0 kW Spindeldrehzahl U/min 70-2400 Serienmäßige Ausrüstung: Hauptschalter mit Motorschutzschalter abschließbar Pilzdrucktaster (verrastend) für NOT-AUS Drehzahlverstellung stufenlos Drehzahlanzeige Digital Vorschubüberlastsicherung Schutzart IP 54 Spindelschutz mit elektrischer Absi ...

Lg.Nr. 25046 Technical data: - Drilling capacity in steel ST 60 28 mm - Drilling capacity in steel ST 60 32 mm - Drilling spindle holder MK 3 long spindle - Drilling spindle stroke 180 mm - Drilling spindle speeds infinitely variable - Adjustable - Level 1 65 - 240 rpm - 130 - 480 rpm - Level 2 240 - 875 rpm - 480 - 1750 rpm - Projection 290 mm - Max. distance table - drilling spindle 620 mm - Table with 2 T-slots 450 x 450 mm - Table with reversible function with fixed machine vice - Table height adjustment via rack with hand crank - Drive 400 V / 0.9 / 1.3 kW - Space requirement approx. W 660 x H 1900 x D 700 mm - Weight approx. 300 kg - with: - Keyless chuck 1-13 mm

Working width: 230 mm Working height: 15-120 mm Number of spindles: 2 St. Weinig Hydro Planer Type Uniplan 23 -------------------------------------------------------------------- Machine was factory overhauled by Weinig in 2024. Description: For two-sided horizontal woodworking with two working spindles. Spindle arrangement: horizontal, bottom and top. The two horizontal spindles are equipped with hydraulically tensioned counterbearings without axial adjustment. Built-in straight jointers on both spindles with automatic stone feed, remotely controlled with the hood closed. Machine with continuous, chainless feed, equipped with rubber rollers. Electric up/down adjustment of the spindles according to a mechanical digital display (SIKO). On/off switch for limiting the up/down adjustment. Feed roller pressure pneumatic. Stops and table tops are not adjustable. Machine with steel table tops.  ...

Table dimensions ( x-y/mm) 1600 x 1300 Stroke ( X/mm) 2000 Stroke ( Y/mm) 1200 Stroke ( Z/mm) 800 Type of controll fagor 8065 Number of spindle per minute 0 - 6000 Accessories atc 40 tools Chuck connection iso 50 Number of axes 6 Features wise system

Table dimensions: 1100 x 400 mm with three grooves Throat: approx. 907 mm Speed: from 35 to 1800 rpm Auction-ID: A7-49089-393

Bluthardt, VRB 6/20 Drilling machine with coordinate table, with digital display DRO- 3 axis , Year of manufacture: 1980, very good condition, can be viewed under power Mounts SK40, quick-change system, incl. mounts MK2, MK3, MK4 , Spindle : 45 - 900 rpm , 3,4KW, right - counterclockwise rotation, Stroke: 200mm, upper part adjustment electr. 500mm Radius : 500, Coordinate table: Clamping surface 600x400m, X-660, Y-450mm To be visited under power!

Machine number: 48305083 Operating voltage: 400 V Frequency: 50 Hz Rated current: 3.2 A Connection: 0.9/1.45 kW Table dimensions: 350 x 260 mm Speed: from 80 to 4000 rpm Auction-ID: A7-49089-480

Machine number: 1863 Operating voltage: 3 x 400 V Frequency: 50 Hz Nominal current: 14 A Throat: approx. 500 mm Speed: from 25 to 3000 rpm Table dimensions: 560 x 480 mm, with three grooves and a three-jaw chuck, diameter: 210 mm Auction-ID: A7-49089-266

in different designs and sizes from small to large , mostly internally cooled , various manufacturers, mainly SECO and SANDVIK Auction-ID: A7-49089-41

Machine number: 33905 Operating voltage: 400 V Frequency: 50 Hz Rated current: 5 A Spindle speed: from 120 to 2200 rpm Drilling depth: 160 mm Table dimensions: 400 x 300 mm with two grooves and a vice, jaw width: 70 mm Auction-ID: A7-49089-268

Machine number: 6233-5 Speed: up to 2800 rpm Drilling diameter: up to 40 mm Projection: approx. 907 mm with two tables Table dimensions: 780 x 600 mm - with four grooves, as well as a three-jaw chuck, diameter: 400 mm Table 2: 1000 x 540 mm, with four grooves and two vices, one jaw width: 125 mm and 100 mm a four-jaw chuck, manufacturer RÖHm, diameter: 200 mm as well as a four-jaw chuck, diameter: 150 mm and a dividing head from the manufacturer HOFMANN, type: VTS 160 with a three-jaw chuck, diameter: 200 mm also various clamping systems, including KOHN clamping system, jaw width: 120 mm Auction-ID: A7-49089-208

Manufacturer: Epiroc Year of Manufacture Two units, one from 2019 and one from 2021 Model: Boomer XE3C Type of Machine: Drill Rig Carrier: - Engine: Deutz TCD 6.1, Tier 5 Final, 180 kW at 2300 r/min, catalyst and particulate filter - Fuel Tank Capacity: 150 liters - Electricity System: 24 V - Batteries: 2 x 125 Ah - Hydrodynamic Transmission: Dana 32000 - Front Axle: Dana 37R 116 - Rear Axle: Dana 213 by oscillation plus or minus 7 degrees - Tires: 14:00 x R24 - Hydraulic Jacks Front: 2 pcs, extendable sideways - Hydraulic Jacks Rear: 2 pcs - Service Braking: Two separate circuits - Brakes: Disc brakes, hydraulically actuated by two separate brake circuits - Parking and Emergency Brake Type: SAHR (Spring Applied Hydraulic Released) - Fire System: FORREX, hand held fire extinguisher - Tramming Lights: 8x40W LED, 2x70W - Work Lights: 2x160W plus 6x60W, 2 pcs joystick co ...