drill grinder used for sale

Disc diameter 350mm Speed 1400rpm Power: 1.8KW see pictures Auction-ID: A7-49782-558

Grinding stone on stand, 2750 rpm, Sharpening stones D= 200 x 35 mm. Auction-ID: A1-48994-54

Double bench grinder: Grinding grit: 36 and 80 Grinding wheel diameter max. 200 mm Grinding wheel width 32 mm Mounting diameter 30 mm Connection voltage 230 V Motor power 0.9 KW Condition: never used / new (5) Auction-ID: A7-49782-602

THE LIST OF LOTS IS NOT DEFINITIVE, IMPORTANT LOTS WILL BE ADDED LATER, PLEASE CHECK THE ADDED LOTS. The sale includes only what appears in the photos. The buyer, by purchasing the equipment, agrees that the device must be used according to the standards and legislation in force in his country. The seller will not be held responsible in any way for misuse that does not comply with the safety conditions and the standards and legislation in force Auction-ID: A1-49883-280

1 pc. universal whetstone (20mm wide) 1 pc. whetstone for HSS steel (40mm wide) Grinding wheel diameter 150 mm Grinding wheel width 20 + 40 mm Mounting diameter 12.7 mm Connection voltage 230 V Motor power 0.25 KW Weight 16 kg Dimensions L x W x H 0.37 x 0.2 x 0.24 m Condition: never used / new (5) Auction-ID: A7-49782-591

Disc diameter 300mm Disc width 40mm Speed 1500rpm Power: 1.1KW see pictures Condition: unchecked (6) Auction-ID: A7-49782-604

Auction-ID: A1-50026-40

Grinding wheel diameter 300mm Speeds 30 / 35m/sec. Motor 1.5KW new electrical engineering incl. 9 new grinding wheels see pictures Auction-ID: A7-49782-658

- Max afstand tussen de punten: 7100 mm - Max bewerkingslengte: 6600 mm - Max werkstukgewicht tussen de punten: 18 ton - 2x 2 brillen worden meegeleverd met de machine - Max conische slijphoek: 10° - Max concaaf/convex slijpen: max 12,7 mm van de diameter - 1 bed met slijpkop (in twee delen over de lengte) en 1 werkstukbed met aandrijfkop en tegenpunt. - 1 filtereenheid - 1 elektrische kast Center distance: 7100 mm Max dia of the workpiece: 1100 mm Control: Num 1060 Motorpower: 90 kW Weight: 126 ton

CONTROLS   CNC controls FANUC SERIES 18-M WORKING RANGE -CUBIC-   X-axis travel: 500 mm   Y-axis travel: 300 mm   W-axis travel: 450 mm   rotating range C-axis from: 0 °   rotating range C-axis up to: 360 ° TABLE   table surface (left-right): 600 mm   table surface (front-back): 380 mm   workpiece load (max): 300 kg ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 1800 mm   space requirements -front/back-: 2000 mm   total height: 3165 mm   total weight approx.: 3100 kg

charge load: 125 liter : 1.000 mm tank diameter / tank height: 920 / 480 mm : 210 mm voltage: 380 V weight of the machine ca.: 630 kg dimensions of the machine ca.: 1,10 x 1,50 x 1,30 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used industrial Christen precision tool and cutter grinder, carrying a Hahn & Kolb, Stuttgart distributor/dealer badge. The machine appears to be a specialised universal grinder intended for sharpening and regrinding cutting tools such as drills, milling cutters and similar tooling. Equipped with an adjustable grinding head, grinding wheel with guard, indexed tool-holding/workhead assembly, multiple graduated adjustment controls and handwheels. The machine is mounted on an integrated pedestal cabinet and is supplied with various tool holders, arbors, collets and other grinding accessories stored in the cabinet, as pictured. Operational condition has not been verified; offered in its current condition as pictured. Auction-ID: A7-50083-28

Gasoline/petrol; 15hp four strokes; 6.5L tank; drume brake; cutting depth 235mm; kit; unused; 6470 Auction-ID: A1-50091-4

Diameter of Cutting Wheel 300mm; cutting wheel thickness:90mm; Cutter Depth Below Ground 225mm; Cutter Depth Above Ground 515mm; width of the machine 760mm; The Qty of Teeth: 9PCS; tyre size:13\"; Brake:Drum Brake; Belt:two pcs V belt; Engine Type: OHV 4-stroke; Starting System: Recoil; Displacement: 420cc Max. Output: 3600rpm Fuel Volume: 6.5L; Oil Volume: 1.1L; Fuel Type: Unleaded Gasoline; DUCAR engine; kit; unused; 6470 Auction-ID: A1-50091-179

The Alta NX Briot is a state-of-the-art machine for surfacing and finishing organic lenses for eyewear, with a production capacity of 60 to 80 Auction-ID: A1-49756-228

Gasoline/petrol; 15hp four strokes; 6.5L tank; drume brake; cutting depth 235mm; kit; unused; 6470 Auction-ID: A1-50091-532

inv 6209 - Grinder Manufacturer: Dyno-Mill Wab Model: KD5 Year: 1994, upgraded to ATEX standards in 2005 Serial Number: 940929 Capacity: 5 liters With trolley Overall dimensions (W x D x H): 1500 x 1130 x 2030 mm Weight: 585 kg Power supply: 380 V / 11 kW Auction-ID: A1-49706-135

Diameter of Cutting Wheel 300mm; cutting wheel thickness:90mm; Cutter Depth Below Ground 225mm; Cutter Depth Above Ground 515mm; width of the machine 760mm; The Qty of Teeth: 9PCS; tyre size:13\"; Brake:Drum Brake; Belt:two pcs V belt; Engine Type: OHV 4-stroke; Starting System: Recoil; Displacement: 420cc Max. Output: 3600rpm Fuel Volume: 6.5L; Oil Volume: 1.1L; Fuel Type: Unleaded Gasoline; DUCAR engine; kit; unused; 6470 Auction-ID: A1-50091-180

Nidek LE-9000 EX 3D Automatic Grinder With Intelligent ICE 9000 Automatic Grooving and Bevel (Error 0402 on LE-9000EX) GOOD CONDITION GOOD WORKING Auction-ID: A1-49756-217

Number of sanding units: 6 st. sanding width: 45-165 mm Sanding height max.: 45-92 mm weight: 2200 kg Ecoline Q-SAND 6 For sale on behalf of a customer -------------------------------------------- Full text as PDF attachment! Short description: Machine with infeed conveyor and automatic height detection. It has two grinding discs on top and two grinding discs on the bottom, each connected to a brush unit. Technical manufacturers description: Ecoline Q-Sand: the ideal grinder for squared timber and more. Designed to work on both sides of the workpiece with three-dimensional adjustment, the Q-Sand guarantees maximum precision and uniformity. It is equipped with grinding discs, flap brushes, and a double disc for more effective material removal, thus improving adhesion for subsequent treatments. The Q-Sand can be installed in a production line or, due to its complete operational autonomy, c ...

CFS double shaft paddle mixer-grinder, model: TMG 2200/280, number: 372/0107-01, year of construction: 2001, 230/400 V, 50 Hz, diameter plate: 280 mm, total dimensions: 2380 mm x 2500 mm x 3000 mm. Including 2 tool trolleys, dimensions: 700 mm x 650 mm x 1150 mm and 1120 mm x 800 mm x 980 mm. With bone elimination system. Incomplete.

Belt sander: This machine can also be mounted without a base. Therefore, it is suitable as a table belt sanding machine. Belt width 100 mm Strap length 1220 mm Belt speed 1140 m/min. Package size max. 0.62 x 0.4 x 0.35 cm Total power requirement 1.5 kW Machine weight approx. 0.04 t Dimensions L x W x H 0.97 x 0.67 x 0.37 m Condition: never used / new (5) Auction-ID: A7-50084-23

Combined belt grinding and pipe grinding machine with - Abrasive belt K 40 - with 7 grinding rollers. 20, 28, 32, 41, 48, 60 and 76mm Sanding belt direction left/right Belt width 100 mm Belt length 2000 mm Belt speed 15/30 m/sec Tube diameter 20 - 76 mm Angle adjustable from - to 30 - 90 degrees Connection voltage 400 V Total power requirement 2.5 /3.3 kW Machine weight approx. 0.19 t Space requirement approx. 1.2 x 0.75 x 0.7 m Condition: never used / new (5) Auction-ID: A7-50084-105

Combined belt grinding and pipe grinding machine with - Abrasive belt K 40 - with 7 grinding rollers. 20, 28, 32, 41, 48, 60 and 76mm Sanding belt direction left/right Belt width 100 mm Belt length 2000 mm Belt speed 15/30 m/sec Tube diameter 20 - 76 mm Angle adjustable from - to 30 - 90 degrees Connection voltage 400 V Total power requirement 2.5 /3.3 kW Machine weight approx. 0.19 t Space requirement approx. 1.2 x 0.75 x 0.7 m Condition: never used / new (5) Auction-ID: A7-50084-15

Belt sander with - Contact disc: 600 x 150 mm Belt width 150 mm Belt length 2000 mm Belt speed 33 m/sec Total power requirement 4 kW Machine weight approx. 100 t Space requirements approx. 1.2 x 0.5 x 0.85 m Condition: never used / new (5) Auction-ID: A7-50084-95

Belt sander with - Contact disc: 200 x 75 mm - Continuous surface grinding table: 75 mm Belt width 75 mm Belt length 2000 mm Belt speed 37 m/sec Total power requirement 3 kW Machine weight approx. 0.105 t Space requirement approx. 1.2 x 0.5 x 1.0 m Condition: never used / new (5) Auction-ID: A7-50084-207

Belt sander with - Contact disc: 600 x 75 mm Belt width 75 mm Belt length 2000 mm Belt speed 30 m/sec Total power requirement 3 kW Machine weight approx. 70 t Space requirements approx. 1.2 x 0.5 x 0.75 m Condition: never used / new (5) Auction-ID: A7-50084-7

Power Cutter Grinding wheel 250mm Speed 2880rpm Motor 1.1KW with various grinding wheels with vice and dial gauge stroke Coolant system Connection voltage 380Volt see pictures Condition: unchecked (6) Auction-ID: A7-50084-199

Belt width 75 mm Belt length 2000 mm Belt speed 30 - 34 m/sec Total power requirement 4.1 HP Machine weight approx. 75 kg Space requirements approx. 1.2 x 0.5 x 0.85 m Condition: never used / new (5) Auction-ID: A7-50084-140

Belt width 150 mm Belt length 2000 mm Belt speed 30 - 34 m/sec Total power requirement 4.8 HP Machine weight approx. 100 kg Space requirements approx. 1.2 x 0.5 x 0.85 m Auction-ID: A7-50084-201

grinding wheel diameter:400 mm total power requirement:3 kW weight of the machine ca.:1,5 t dimensions of the machine ca.:1,5 x 1,4 x 1,3 m Dressing Grinder for gears REISHAUER AM max. width of grinding wheel 104 mm max. dia. of grinding wheel 400 mm max. module 7 min. module 0,5 pressure angle 10 - 30 ° grinding worm dia. 270 - 400 mm width of grinding worm 62/84/104 mm grinding worm turning speeds: at profiling 18/35/70 U/min electrics - voltage/frequency 380 / 50 V/Hz long. movement of crowning device 156 mm

sanding belt length:max. 470 mm workpiece dia.:600 mm table - swivable:0 - 6 Grad taper:Reitstock Morse 2 turning speed range::1260 - 3100 U/min table movement:längs 470 mm tool taper:schwenkbar 0-6 °, 90° dre total power requirement:0,4 kW weight of the machine ca.:950 kg dimensions of the machine ca.:1100 x 1100 x 1500 mm Documents:vorhanden

Table, Drilling and Tapping Machine FLOTT Type TBZ 15 GLFabr. No. 32177027 year of construction 1986Drilling capacity 15 mmSpindle mount MK2Throat depth 195 mmPine stroke 80 mmTable size 275 x 200 mmColumn diameter 70 mmSpindle speed 80 - 4500 rpm. 18 stepsMotor power 0.55 + 0.75 kWNet connection 380 volts, 50 Hz- 6 belt steps from the motor and 2 belt stages to the drilling spindle 2 motor speeds- 3 pieces guide cartridges 0.7mm + 0.8mm and 28G available- Drill head height adjustment via crank with rack on the

Drill Bit Grinding Machine GÜHRING Type SS 15Fabr. No. 909 Year of construction approx. 1977Drill diameter max. 40 mmGrinding wheel diameter right 300 mmGrinding wheel diameter left 250 mmGrinding wheel width 40 mmGrinding spindle speed approx. 2800 rpmMotor power approx. 2.2 kWNet connection 380 volts, 50 Hz- tip angle infinitely adjustable- Sharpening device- Gear motor for height oscillation in front of the cup wheel- Diamond dressing holder- Various drill holders-

Magnetic Drilling Machine, Magnetic Drilling MachineCore Hole Drilling Machine, Metal Core Hole Drilling MachineDR. BENDER Type EK 323Masch No. 180543 year of construction approx. 1988Drilling capacity 23 mmSpindle holder MK 2Spindle speed 160 / 400 / 1250 rpm. Magnet 215 x 105 mmDrilling unit 220 Volt, 50 Hz, 1025 WattE-Magnet 220 Volt, 50 Hz, 65 Watt- Spindle speed via 3 gear stages- Left and right rotation- E-magnet KOCH, type KL32/6- Drill head height adjustment guided in a linear guide- Manual expulsor- Drill stand on

Radial drilling machine WEBO type R4bRFabr. No. 15 / E195 Year of construction approx. 1965Drilling capacity 40 mmThroat: approx. 1250 mmSpindle holder: MK 4Spindle speed: 30 - 1325 rpm. 9 stepsFeed from 0.12 - 2 mm/rev. 9 steps; used

Column Drill ALZMETALL Type AB 4 SVMasch. No. 14805 Year of construction approx. 1980Drilling capacity 40 mmSpindle holder MK 4 - Short quillThroat projection 340 mmQuill stroke 180 mmTable size 710 x 560 mmColumn diameter 160 mmSpindle speed 30 - 765 rpm. infinitely variableMotor power 2.3 and 3.4 kW pole-switchableMains connection 380 volts, 50 Hz- Spindle speed over 2 motor speeds and infinitely variable gear- Gears with 2 gear stages for high torque at low speeds- Spindle on/off via

Column drilling machine GOTHABear power 30 mmSpindle holder MK 3 - long quill, throat depth 350 mmPine stroke 200 mmTable size 460 mmSpindle speed 160 - 750 rpm. 4 stepsFeed rate 0.1 - 0.2 - 0.3 mm/COLUMN diameter 160 mmMotor power 2.2 kWNerg connection 380 volts, 50 Hz- Spindle speed via 4 gear stages- Automatic feed- Rotatable drilling table with mechanical clamping- Table height adjustment via hand crank- Clamping surface at the machine foot 450 x 450 mmSpace required L x W x H 700

Column drill INFRATIREA - ORADEA type PH - 031Series. No. 02434 Year of construction 1975Drilling capacity 40 mmSpindle holder MK 4 - short quillThroat depth 320 mmQuill stroke 250 mmTable size 400 x 400 mmColumn diameter 160 mmSpindle speed 85 - 1500 rpm. 6 gear stagesMotor power 2.2 kWNet connection 400 volts, 50 Hz- Spindle speed via 6 gear stages- Clockwise and counterclockwise rotation- Automatic feed 0.10 - 0.16 - 0.25 - 0.4 mm/U- Drilling table swivelling- Table height adjustment via

Used Radial Drilling Machine DONAU Donauflex 145 Year of Make: 2006 Only a few hours of operation. • Drilling capacity in steel 45 mm • Boom travel 1,050 mm • Drilling radius min. 540 mm / max. 1,590 mm • Spindle speed 15 - 2,800 rpm • Tapping device • Tool holder MK 4 • Hydraulic clamping for boom and lifting column • Electromagnetic feed clutch • Machine light