drawing used for sale

pressure: 70 t throat: 325 mm stroke: 800 mm die cushion capacity: 35 t drawing stroke: 280 mm ejector stroke: 240 mm rapid traverse - down: 650 mm/sec working feed: 58-199 mm/sec dayligth: 1050 mm table surface area: 900x580 mm ram surface: 460x460 mm total power requirement: 45 kW weight of the machine ca.: 6,3 t dimensions of the machine ca.: BxTxH 1000x2200x4000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 160 t throat: 360 mm stroke: 500 mm table surface area: 1250x630 mm ram surface: 1000x450 mm table height: 1000 mm dayligth: 800 mm weight of the machine ca.: 8 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight: 2 t stroke: 500 mm : ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 63 t distance between columns: 650 mm stroke: 200 mm total power requirement: 30 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 125 t distance between columns: 1050 mm stroke: 250 mm total power requirement: 40 kW weight of the machine ca.: 8,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 160 t throat: 360 mm stroke: 560 mm total power requirement: 33 kW weight of the machine ca.: 6000 kg dimensions of the machine ca.: 2000x2400x3650 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A Geiss large-format vacuum thermoforming machine is available. Panel cutting min.: 1100mm/1300mm, max. panel cutting: 2100mm/1800mm, max. forming depth: 620mm. Additional panel format 1: min.: 850mm/750mm, max.: 1850mm/1250mm. Additional panel format 2: min.: 1050mm/800mm, max.: 2050mm/1300mm. Including a separate loading machine with pneumatic panel separating equipment, an automatic aligner for panel cuts in longitudinal and transverse direction, a pneumatic pusher for removing the molded parts from the loading unit, fully automatic central lubrication of the loading machine, several interchangeable pallets for window panel sets, a storage rack for window panels as well as a vacuum control with four independently adjustable flow stages and an air preparation system. Documentation available. On-site inspection is possible.

A Niehoff slide-free drawing machine is available. Processing diameter: 5mm-15mm, drawing speed range: 6m/min-24m/min, gearbox: manual gearbox, machine dimensions X/Y/Z: approx. 2600mm/2200mm/4000mm, weight: approx. 6500kg. The gearbox was completely overhauled in 2019 with new gears and new bearings. A new external lubricating oil pump was also installed in the same year. Documentation available. On-site inspection is possible.

One used KOCH automatic spooler KSS 1250 for the production of coils up to 3 tons. The machine do have an upgrated electric system, 2 collapsible spools and it is dismantled.

stroke: 600 mm hydraulic: ja : keins dabei weight: 3,7 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A semi-automatic vacuum skin packaging machine (tray sealer) Sealed Air for Darfresh skin packaging is available. Packaging capacity: 15/min, cycle performance: 1.5 cycles/min, film width: 562mm, max. product dimensions X/Y/Z: 670mm/470mm/50mm, tray length range: 135mm-700mm, tray width range: 120mm-520mm, tray height range: 5mm-50mm. Machine dimensions X/Y/Z: approx. 1050mm/1650mm/1250mm, weight: approx. 500kg. Documentation available. An on-site inspection is possible.

WEBOMATIC APS ML 4600 THERMOFORMER

FAMAR THERMOFORMER, MODEL RM150 Thermoformer for the packaging of various products (tablets, soft or hard capsules, dragees, ampoules). Technical documentation available. Incoterm: EXW PRODUCTION Output: up to 100 blisters/min Film material: alu, paper, PVC Max reel width: 140 mm Max diameter of the thermoformable material reel: 400 mm Max diameter of the covering material reel: 200 mm Max forming depth: 15 mm Spacing: from 50 to 150 mm OTHER CHARACTERISTICS Machine size: 4460 x 1080 x 2260 mm Weight: 2000 kg ENERGY CONSUMPTION Power supply: 380 V + ground / 50 Hz; Absorbed power: 9 kW; Compressed air consumption: 200 l/mn

2005 Multivac R 240, hard and soft film, film width 355 mm, take-off 200 mm, sandwich preheating, stamps heated, MAP, MC 96-2 control, upper stroke at mould and sealing station, soft and hard film cutting, outfeed belt and residual film rewinder, central lubrication, automatic chain lubrication. Top condition-ready for use.

Used automatic thermoforming machine for butter packaging from TMCI Padovan type FM80-8 H.C. Packages of 10 grams and 125 grams.

clamping plate: 595 x 445 mm drawing length: 400 mm stroke: 400 mm weight of the machine ca.: 1.600 t dimensions of the machine ca.: 1.400 x 1.200 x 1.500 mm Minimum/maximum cutting speed: 0 - 20 m/min Minimum/maximum return speed: 40 m/min Maximum workpiece diameter according to DIN6885 (bore): 230 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A large-format vacuum thermoforming machine Geiss with two window plates is available. Heating power: 360kW, connected load: 370kW, window plates: 2, min. window plate dimensions 1: 1360mm/860mm, max. window plate dimensions 1: 2460mm/1460mm, window plate adjustment 1 X/Y: 1100mm/600mm, min. window plate dimensions 2: 940mm/520mm, max. window plate dimensions 2: 2400mm/1400mm, window plate adjustment 2 X/Y: 1460mm/880mm, materials: PS/ABS/TPU/PMMA. Total system dimensions X/Y/Z: approx. 9150mm/2350mm/4000mm, total weight: approx. 15500kg, control: Siemens Simatic Panel PC, operating hours (April 2026): approx. 20100h. Documentation available. An on-site inspection is possible. Without vacuum pump, spare parts and temperature control unit. Expected to be available from October 2026.

groove width: 3-28 mm tool length - max.: 1200 mm working speed: 3m/min+6m/min m/min pulling capacity: 60 kN bei 3m/min kN pulling capacity: 40 kN bei 6 m/min kN stroke: 1050 mm weight of the machine ca.: 600 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

wire dia.: . mm wire length: . mm pulling capacity: 7 t total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used blister line from Bosch. The line includes: Tact blister machine type TLT 1560 year of manufacture 1991 Cartoner type C, year of manufacture 1991

Used Multivac packer type R 530. Year of manufacture 2007. 400V, 50Hz, phases 3+N, power 20.5 kW, current 47A. Bottom foil, hard width: 450mm, thickness: 400um Top foil soft width 450 mm, thickness 88um Included : Spare sealing plate, seal for the sealing mold, inserts for changing the depth of the extruded film, basic set of spare parts, manufacturer's documentation and user manual, templates for inserting the product, traverse for printing on packaging from a Hitachi printer, spare cutting die cut sharpened by Multivac packed in a box. Capacity 10 beats per minute (8 pieces per cycle)

Thermoforming packaging machine (thermoformer, roll packer) characterized by the production of packaging from two rolls of film. Depending on the type of machine and the film used, the packaging can be soft or hard. Machines designed for packaging food and non-food products. Manufacturer: Multivac; Model: R80; Year of manufacture 1985; Working with soft film; Bottom film: +/- 420mm (approx.); Top film: +/- 410mm (approx.); Formats: 1.2; Length: 6000mm; Width: 1000mm; Height: 1800mm; Weight: 1600 kg.

FRÖMAG RAPIDA 463 slotting machine incl. platform & accessories -Manufacturable groove widths 3 - 63mm -Largest groove length 600mm -Indexing table -In bores from 10-500mm -Feed size 0.01-0.25mm -Cutting speed infinitely adjustable 2-22 meters /min -Return speed-Constant 50 meters /min -Load capacity 3000 kg -Connected load 4.6 KW -Incl. work platform -Various drawing needles & matching accessories in the tool cabinet Dimensions: LxWxH (machine) 1.6x1.5x2.3 meters / weight 3500 kg

diameter range max 18 mm feeding speed max 15 m/m capstan diameter 900 mm output 20 HP

inlet wire diameter 6,5 mm finished wire diamter 1,6 mm number of drafts 8 diameter of capstan 550 mm and 650 mm speed -meters/sek 8-12

straight through inlet wire diameter 2,5 mm finished wire diamter 0,8 mm number of drafts 8 diameter of capstan 400 mm speed -meters/sek 15 m

diameter range 26 mm drawing speed 10 m/min diameter range - mild steel 26 mm diameter range - high tensile 24 mm capstan diameter 1300 mm

diameter range 15,6 mm high-tensile 14,1 mm capstan diameter 900 mm drawing speed 16 m/min output 1500 kg

only the draw drum diameter range 11 mm capstan diameter 700 mm clear width 150 (160) mm

For sale is an 800 to step press. Technical data see photos. Press we sell from location.

Key data: 250 t

Press force: 2500 kN Installation height: 800 mm Stroke: 500 mm Table: 900 x 630 mm (1200 x 630 mm) Plunger: 750 x 450 mm (900 x 550 mm) Projection: 360 mm Speed from: 200 mm Speed on: 110 mm Height of the machine: approx. 3,600 mm Weight: approx. 9,000 kg Connection: 20.5 kW Machine can be sold in original condition or overhauled with current UVV

Key data: 160 t

Press force: 1600 kN Installation height: 800 mm Stroke: 500 mm Table: 900 x 630 mm Plunger: 750 x 450 mm Projection: 360 mm Speed from: 200 mm Speed on: 125 mm Height of the machine: approx. 3,450 mm Weight: approx. 7,000 kg Connection: 17 kW Machine can be sold in original condition or overhauled with current UVV

serial number: 23046 stroke: 320 mm Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Multivac R 145, film width 320 mm, trigger 200 mm, format 2.1, rigid film, MAP. Top condition

pulling force - max.: 16 t broaching length max.: 1250 mm table width: 400 mm broaching speed: 1...6,4 m/min return speed: 19,5 m/min tool length - max.: 1500 mm total power requirement: 42 kW weight of the machine ca.: 16 t dimensions of the machine ca.: m Specification: 2- jobs broaching right or left / right and left at the sametime Pulling force: max. 16 t Max. stroke length: 1,250 mm Table width: 400 mm Broaching speed: 1.0 – 6.4 m/min Return speed: 19.5 m/min Max. tool length: 1,500 mm Total power requirement: 42 kW Machine weight: approx. 16 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 600 t distance between columns: 2600 mm stroke: 900 mm distance table/blankh.,max. stroke up,adjustm. up: 1600 mm table surface area: 2500 x 1730 mm die-cushion pressure inside the table: 250 t stroke of drawing cushion in table: 400 mm die-cushion pressure in pusher: 63 t stroke of drawing cushion in pusher: 150 mm ram surface: 2500 x 1730 mm column travel -side: 1100 mm die-cushion inside the table: hydraulic, controlled die-cushion in pusher: hydraulic, controlled total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m overhauled in 2005 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 600 t distance between columns: 2600 mm stroke: 900 mm distance table/blankh.,max. stroke up,adjustm. up: 1600 mm table surface area: 2500 x 1730 mm die-cushion pressure inside the table: 250 t stroke of drawing cushion in table: 400 mm die-cushion pressure in pusher: 63 t stroke of drawing cushion in pusher: 150 mm ram surface: 2500 x 1730 mm column travel -side: 1100 mm die-cushion inside the table: hydraulic, controlled die-cushion in pusher: hydraulic, controlled total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m overhauled in 2005 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 600 t distance between columns: 2600 mm stroke: 900 mm distance table/blankh.,max. stroke up,adjustm. up: 1600 mm table surface area: 2500 x 1730 mm die-cushion pressure inside the table: 250 t stroke of drawing cushion in table: 400 mm die-cushion pressure in pusher: 63 t stroke of drawing cushion in pusher: 150 mm ram surface: 2500 x 1730 mm column travel -side: 1100 mm die-cushion inside the table: hydraulic, controlled die-cushion in pusher: hydraulic, controlled total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m overhauled in 2005 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 800 t distance between columns: 3160 mm stroke: 1100 mm control: Siemens S5 distance table/blankh.,max. stroke up,adjustm. up: 1900 mm table surface area: 3100 x 1900 mm die-cushion pressure inside the table: 300 t stroke of drawing cushion in table: 400 mm die-cushion pressure in pusher: 80 t stroke of drawing cushion in table: 150 mm ram surface: 3100 x 1900 mm die-cushion in pusher: hydraulic, controlled die-cushion inside the table: hydraulic, controlled total power requirement: 200 kW weight of the machine ca.: 150 t dimensions of the machine ca.: 4,95 x 3,3 x 10,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 800 t distance between columns: 3160 mm stroke: 1100 mm control: Siemens S5 distance table/blankh.,max. stroke up,adjustm. up: 1900 mm table surface area: 3100 x 1900 mm die-cushion pressure inside the table: 300 t stroke of drawing cushion in table: 400 mm die-cushion pressure in pusher: 80 t stroke of drawing cushion in table: 150 mm ram surface: 3100 x 1900 mm die-cushion in pusher: hydraulic, controlled die-cushion inside the table: hydraulic, controlled total power requirement: 200 kW weight of the machine ca.: 150 t dimensions of the machine ca.: 4,95 x 3,3 x 10,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 800 t distance between columns: 3160 mm stroke: 1100 mm control: Siemens S5 distance table/blankh.,max. stroke up,adjustm. up: 1900 mm table surface area: 3100 x 1900 mm die-cushion pressure inside the table: 300 t stroke of drawing cushion in table: 400 mm die-cushion pressure in pusher: 80 t stroke of drawing cushion in table: 150 mm ram surface: 3100 x 1900 mm die-cushion in pusher: hydraulic, controlled die-cushion inside the table: hydraulic, controlled total power requirement: 200 kW weight of the machine ca.: 150 t dimensions of the machine ca.: 4,95 x 3,3 x 10,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 800 t distance between columns: 3160 mm stroke: 1100 mm control: Siemens S5 distance table/blankh.,max. stroke up,adjustm. up: 1900 mm table surface area: 3100 x 1900 mm die-cushion pressure inside the table: 300 t stroke of drawing cushion in table: 400 mm die-cushion pressure in pusher: 80 t stroke of drawing cushion in table: 150 mm ram surface: 3100 x 1900 mm die-cushion in pusher: hydraulic, controlled die-cushion inside the table: hydraulic, controlled total power requirement: 200 kW weight of the machine ca.: 150 t dimensions of the machine ca.: 4,95 x 3,3 x 10,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 800 t distance between columns: 3160 mm stroke: 1100 mm distance table/blankh.,max. stroke up,adjustm. up: 1900 mm table surface area: 3100 x 1900 mm die-cushion pressure inside the table: 300 t stroke of drawing cushion in table: 400 mm die-cushion pressure in pusher: 80 t stroke of drawing cushion in table: 150 mm ram surface: 3100 x 1900 mm die-cushion in pusher: hydraulic, controlled die-cushion inside the table: hydraulic, controlled total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 1000 t distance between columns: 4150 mm stroke: 1200 mm distance table/blankh.,max. stroke up,adjustm. up: 2100 mm table surface area: 4000 x 2200 mm die-cushion pressure inside the table: 360 t stroke of drawing cushion in table: 300 mm die-cushion pressure in pusher: 100 t stroke of drawing cushion in pusher: 150 mm ram surface: 4000 x 2200 mm column travel -side: 1300 mm die-cushion inside the table: hydraulic, controlled die-cushion in pusher: hydraulic, controlled Cut Shock absorption: hydraulic total power requirement: kW weight of the machine ca.: 280 t dimensions of the machine ca.: m The machine was overtaken 1999. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 1000 t distance between columns: 4150 mm stroke: 1200 mm distance table/blankh.,max. stroke up,adjustm. up: 2100 mm table surface area: 4000 x 2200 mm die-cushion pressure inside the table: 360 t stroke of drawing cushion in table: 300 mm die-cushion pressure in pusher: 100 t stroke of drawing cushion in pusher: 150 mm ram surface: 4000 x 2200 mm column travel -side: 1300 mm die-cushion inside the table: hydraulic, controlled die-cushion in pusher: hydraulic, controlled Cut Shock absorption: hydraulic total power requirement: kW weight of the machine ca.: 280 t dimensions of the machine ca.: m The machine was overtaken 1999. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 1000 t distance between columns: 4150 mm stroke: 1200 mm distance table/blankh.,max. stroke up,adjustm. up: 2100 mm table surface area: 4000 x 2200 mm die-cushion pressure inside the table: 360 t stroke of drawing cushion in table: 300 mm die-cushion pressure in pusher: 100 t stroke of drawing cushion in pusher: 150 mm ram surface: 4000 x 2200 mm column travel -side: 1300 mm die-cushion inside the table: hydraulic, controlled die-cushion in pusher: hydraulic, controlled Cut Shock absorption: hydraulic Control: Siemens S7 height over floor: 7,7 m total power requirement: 300 kW weight of the machine ca.: 280 t dimensions of the machine ca.: 5,75 x 4,3 x 9,55 m Year of construction 1973 Modernization 2005 with oil-hydraulic drive, hydraulically controlled drawing cushion in the table and Ram, hydraulic cutting impact damping stored dismantled - short video available from the sell ...

groove width: 6-20 mm drawing length: - mm working speed: - m/min total power requirement: 3 kW weight of the machine ca.: 0,7 t dimensions of the machine ca.: 1 x 0,7 x 1,6 m No. 0319 Grooving machine with various drawing tools Frömag KZ-22 5 drawing tools in the sizes 6 / 8 / 10 / 12 / 20 mm 5 holders for bores from 10-35 mm Transport dimensions approx. 1000 x600 x1600 mm Weight approx. 700 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

groove width: 3 - 50 mm drawing length: 315 mm working speed: 3 - 15 m/min total power requirement: - kW weight of the machine ca.: 1 t dimensions of the machine ca.: 1,5 x 1 x 1,6 m No. 3327: wedge and keyway drawing machine manufactured by WGW, type NZM 50/330 Accessories: 8 drawing tools: 1 x 8 mm / 2 x 10 mm / 1 x 21 mm / 4 x 22 mm Working speed 3-14.7 m/min Groove width 3 - 50 mm Groove length up to 315 mm Space requirement 1.5 x 1.0 x 1.6 m Weight 800 - 1000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

\" Technical details Manufacturer: Adda Fer Meccanica Type: Multi-wire straightening, feeding and cutting line Function: Preparation of wire for mesh production Build year: Estimated 1985–2000 Automation: Relay-controlled industrial system Quantity: 1 complete machine Configuration: - Multiple wire coil pay-off stations - Wire straightening assemblies - Wire guide rollers - Driven feed roller units - Gear reduction drive systems - Vertical processing tower - Electric drive motors - Control cabinets - Automated wire handling system Application: - Reinforcement wire processing - Welded mesh production - Steel wire straightening - Wire cutting operations - Construction mesh manufacturing - Industrial wire preparation Process function: - Wire decoiling from multiple coils - Wire straightening and conditioning - Automatic wire feeding - Wire length preparation fo ...