drawing machine used for sale

MECA Thermoformer Type: 650 Number: T02126 Year of construction: 07/04 Distance between chains: 500 mm Dye's: (4x) 210 mm x 170 mm, total dimensions: 7300 mm x 1300 mm x 2470 mm Including large amount of parts.

used thermoforming machine TYPE Powerpak NT 420 year 2011 for sale Machine was taken out of production - ran to the last. Foil width 420 VZ 590 mm Price on request

Machine type: Pipe drawing machine / line Working area: pipe diameter: 4-40mm, Wall thickness: 0.4-3 mm, Pipe length: 3,000-8,000 mm Speed: 60-80m/min Make: Bültmann Type: Pipe drawing machine type GKZ 080/01-10 Year of construction: 1995 Location: NRW Length 25,660 mm (entire system) Width 6,750 mm (entire system) Country of origin: Germany Delivery time short

Multivac R 230, year of manufacture 2001, film width 355 mm, draw-off length 210 mm, free loading section of 1,6 m, MC96II control with LCD monitor, 10 mm side trim, two cross-cut guillotines, height-adjustable discharge conveyor, central chain lubrication, new servo inverter for chain feed, Vario tool with interchangeable formats. Format: 1.1 . 335 mm x 210 mm 2.1 - 167.5 mm x 210 mm 2.2 - 167.5 mm x 105 mm 3.1 - 111.66 mm x 210 mm Total length of the machine 5,15 m Operational and wear parts replaced.

DIXIE UNION, DIXIEVAC2000 Thermoformer, 400 Volt, 50 HZ, in working condition

MALMEDIE DIE Adjustable drawing speed with inverter • Minimum worked diameter 15 mm • Maximum worked diameter 25 mm • External dimension coils 1,250-1,300 mm • Internal dimension coils 800-900 mm • Length 700-1,300 mm • Weight 1.500 Kgs • Wire surface treatment bonderized with soaped • Tensile resistance approx 500 N/mm2 The drawing machine normally work the raw material over mentioned with the follow specification: • Number of drawing passage 1 • Drawing die sizes 120x45 mm • Lubricant now used oil • Max area reduction 6 to 8 % • Drawing speed adjustable with inverter

Manufacturer: CFS (GEA) Type: Compact 420 YOM: 2010 El. specs: 28 kW, 42 A, 400 V, 50 Hz Labelling machine: Manufacturer: CFS Type: TiroLabe TL-150 YOM: 2010 includes 4 format sets Vacuum Pump: BUSCH R5 Includes ESPERA outfeed conveyor Condition: very good

Machine Type Pipe Drawing Machine / Line Working range pipe diameter: 4-40mm, wall thickness 0.4-3mm, pipe length 3,000-8,000 mm Speed 60-80m/min Make Bültmann , Type Pipe Drawing Machine Type GKZ 080/01-10 Built in 1995 Location NRW Length 25,660 mm (entire system) Width 6,750 mm (entire system) Country of origin: Germany

Illig SK 74-C from a workshop for the disabled Year of construction 2006 Serial No.426-0172 JM80Q2 +2 pallets with approx. 38 rolls of film Dimensions in mm approx. 2200x1600x1600

These used compact and versatile cold rolling line is completely modular and do have two bull blocks and works in addition with modular descalers, lubricant unit, stress relieving device, as well as with a pay-off and horizontal 3 ton spooler

Hopper and vibratory trough for Uhlmann UPS

Universal keyway drawing machine of the Cardinal brand suitable for tooling, fixture construction, training and mold making Groove width 3 - 100 mm max. groove length 1250 mm Cgichwnnmv Tensile strength 6000 kg Drawing length 1250mm Motor 5.5 KW Weight 1650 kg Dimensions 1000x1650x1000mm

Inv. Num. : 8067 Type: WWD30-10 Producer: ZT Italy Created: 2021 Parameters: Maximum Inlet Diameter: 3.3 mm Minimum Outlet Diameter: 0.55 mm Maximum output diameter: 1.05 mm

weight: 2 t stroke: 500 mm : ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A Geiss large-format vacuum thermoforming machine is available. Panel cutting min.: 1100mm/1300mm, max. panel cutting: 2100mm/1800mm, max. forming depth: 620mm. Additional panel format 1: min.: 850mm/750mm, max.: 1850mm/1250mm. Additional panel format 2: min.: 1050mm/800mm, max.: 2050mm/1300mm. Including a separate loading machine with pneumatic panel separating equipment, an automatic aligner for panel cuts in longitudinal and transverse direction, a pneumatic pusher for removing the molded parts from the loading unit, fully automatic central lubrication of the loading machine, several interchangeable pallets for window panel sets, a storage rack for window panels as well as a vacuum control with four independently adjustable flow stages and an air preparation system. Documentation available. On-site inspection is possible.

A Niehoff slide-free drawing machine is available. Processing diameter: 5mm-15mm, drawing speed range: 6m/min-24m/min, gearbox: manual gearbox, machine dimensions X/Y/Z: approx. 2600mm/2200mm/4000mm, weight: approx. 6500kg. The gearbox was completely overhauled in 2019 with new gears and new bearings. A new external lubricating oil pump was also installed in the same year. Documentation available. On-site inspection is possible.

One used KOCH automatic spooler KSS 1250 for the production of coils up to 3 tons. The machine do have an upgrated electric system, 2 collapsible spools and it is dismantled.

stroke: 600 mm hydraulic: ja : keins dabei weight: 3,7 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A semi-automatic vacuum skin packaging machine (tray sealer) Sealed Air for Darfresh skin packaging is available. Packaging capacity: 15/min, cycle performance: 1.5 cycles/min, film width: 562mm, max. product dimensions X/Y/Z: 670mm/470mm/50mm, tray length range: 135mm-700mm, tray width range: 120mm-520mm, tray height range: 5mm-50mm. Machine dimensions X/Y/Z: approx. 1050mm/1650mm/1250mm, weight: approx. 500kg. Documentation available. An on-site inspection is possible.

WEBOMATIC APS ML 4600 THERMOFORMER

FAMAR THERMOFORMER, MODEL RM150 Thermoformer for the packaging of various products (tablets, soft or hard capsules, dragees, ampoules). Technical documentation available. Incoterm: EXW PRODUCTION Output: up to 100 blisters/min Film material: alu, paper, PVC Max reel width: 140 mm Max diameter of the thermoformable material reel: 400 mm Max diameter of the covering material reel: 200 mm Max forming depth: 15 mm Spacing: from 50 to 150 mm OTHER CHARACTERISTICS Machine size: 4460 x 1080 x 2260 mm Weight: 2000 kg ENERGY CONSUMPTION Power supply: 380 V + ground / 50 Hz; Absorbed power: 9 kW; Compressed air consumption: 200 l/mn

2005 Multivac R 240, hard and soft film, film width 355 mm, take-off 200 mm, sandwich preheating, stamps heated, MAP, MC 96-2 control, upper stroke at mould and sealing station, soft and hard film cutting, outfeed belt and residual film rewinder, central lubrication, automatic chain lubrication. Top condition-ready for use.

clamping plate: 595 x 445 mm drawing length: 400 mm stroke: 400 mm weight of the machine ca.: 1.600 t dimensions of the machine ca.: 1.400 x 1.200 x 1.500 mm Minimum/maximum cutting speed: 0 - 20 m/min Minimum/maximum return speed: 40 m/min Maximum workpiece diameter according to DIN6885 (bore): 230 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used automatic thermoforming machine for butter packaging from TMCI Padovan type FM80-8 H.C. Packages of 10 grams and 125 grams.

groove width: 3-28 mm tool length - max.: 1200 mm working speed: 3m/min+6m/min m/min pulling capacity: 60 kN bei 3m/min kN pulling capacity: 40 kN bei 6 m/min kN stroke: 1050 mm weight of the machine ca.: 600 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A large-format vacuum thermoforming machine Geiss with two window plates is available. Heating power: 360kW, connected load: 370kW, window plates: 2, min. window plate dimensions 1: 1360mm/860mm, max. window plate dimensions 1: 2460mm/1460mm, window plate adjustment 1 X/Y: 1100mm/600mm, min. window plate dimensions 2: 940mm/520mm, max. window plate dimensions 2: 2400mm/1400mm, window plate adjustment 2 X/Y: 1460mm/880mm, materials: PS/ABS/TPU/PMMA. Total system dimensions X/Y/Z: approx. 9150mm/2350mm/4000mm, total weight: approx. 15500kg, control: Siemens Simatic Panel PC, operating hours (April 2026): approx. 20100h. Documentation available. An on-site inspection is possible. Without vacuum pump, spare parts and temperature control unit. Expected to be available from October 2026.

Used Multivac packer type R 530. Year of manufacture 2007. 400V, 50Hz, phases 3+N, power 20.5 kW, current 47A. Bottom foil, hard width: 450mm, thickness: 400um Top foil soft width 450 mm, thickness 88um Included : Spare sealing plate, seal for the sealing mold, inserts for changing the depth of the extruded film, basic set of spare parts, manufacturer's documentation and user manual, templates for inserting the product, traverse for printing on packaging from a Hitachi printer, spare cutting die cut sharpened by Multivac packed in a box. Capacity 10 beats per minute (8 pieces per cycle)

wire dia.: . mm wire length: . mm pulling capacity: 7 t total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used blister line from Bosch. The line includes: Tact blister machine type TLT 1560 year of manufacture 1991 Cartoner type C, year of manufacture 1991

Thermoforming packaging machine (thermoformer, roll packer) characterized by the production of packaging from two rolls of film. Depending on the type of machine and the film used, the packaging can be soft or hard. Machines designed for packaging food and non-food products. Manufacturer: Multivac; Model: R80; Year of manufacture 1985; Working with soft film; Bottom film: +/- 420mm (approx.); Top film: +/- 410mm (approx.); Formats: 1.2; Length: 6000mm; Width: 1000mm; Height: 1800mm; Weight: 1600 kg.

FRÖMAG RAPIDA 463 slotting machine incl. platform & accessories -Manufacturable groove widths 3 - 63mm -Largest groove length 600mm -Indexing table -In bores from 10-500mm -Feed size 0.01-0.25mm -Cutting speed infinitely adjustable 2-22 meters /min -Return speed-Constant 50 meters /min -Load capacity 3000 kg -Connected load 4.6 KW -Incl. work platform -Various drawing needles & matching accessories in the tool cabinet Dimensions: LxWxH (machine) 1.6x1.5x2.3 meters / weight 3500 kg

diameter range max 18 mm feeding speed max 15 m/m capstan diameter 900 mm output 20 HP

inlet wire diameter 6,5 mm finished wire diamter 1,6 mm number of drafts 8 diameter of capstan 550 mm and 650 mm speed -meters/sek 8-12

straight through inlet wire diameter 2,5 mm finished wire diamter 0,8 mm number of drafts 8 diameter of capstan 400 mm speed -meters/sek 15 m

diameter range 26 mm drawing speed 10 m/min diameter range - mild steel 26 mm diameter range - high tensile 24 mm capstan diameter 1300 mm

diameter range 15,6 mm high-tensile 14,1 mm capstan diameter 900 mm drawing speed 16 m/min output 1500 kg

only the draw drum diameter range 11 mm capstan diameter 700 mm clear width 150 (160) mm

serial number: 23046 stroke: 320 mm Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Multivac R 145, film width 320 mm, trigger 200 mm, format 2.1, rigid film, MAP. Top condition

pulling force - max.: 16 t broaching length max.: 1250 mm table width: 400 mm broaching speed: 1...6,4 m/min return speed: 19,5 m/min tool length - max.: 1500 mm total power requirement: 42 kW weight of the machine ca.: 16 t dimensions of the machine ca.: m Specification: 2- jobs broaching right or left / right and left at the sametime Pulling force: max. 16 t Max. stroke length: 1,250 mm Table width: 400 mm Broaching speed: 1.0 – 6.4 m/min Return speed: 19.5 m/min Max. tool length: 1,500 mm Total power requirement: 42 kW Machine weight: approx. 16 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

groove width: 6-20 mm drawing length: - mm working speed: - m/min total power requirement: 3 kW weight of the machine ca.: 0,7 t dimensions of the machine ca.: 1 x 0,7 x 1,6 m No. 0319 Grooving machine with various drawing tools Frömag KZ-22 5 drawing tools in the sizes 6 / 8 / 10 / 12 / 20 mm 5 holders for bores from 10-35 mm Transport dimensions approx. 1000 x600 x1600 mm Weight approx. 700 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

groove width: 3 - 50 mm drawing length: 315 mm working speed: 3 - 15 m/min total power requirement: - kW weight of the machine ca.: 1 t dimensions of the machine ca.: 1,5 x 1 x 1,6 m No. 3327: wedge and keyway drawing machine manufactured by WGW, type NZM 50/330 Accessories: 8 drawing tools: 1 x 8 mm / 2 x 10 mm / 1 x 21 mm / 4 x 22 mm Working speed 3-14.7 m/min Groove width 3 - 50 mm Groove length up to 315 mm Space requirement 1.5 x 1.0 x 1.6 m Weight 800 - 1000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

\" Technical details Manufacturer: Adda Fer Meccanica Type: Multi-wire straightening, feeding and cutting line Function: Preparation of wire for mesh production Build year: Estimated 1985–2000 Automation: Relay-controlled industrial system Quantity: 1 complete machine Configuration: - Multiple wire coil pay-off stations - Wire straightening assemblies - Wire guide rollers - Driven feed roller units - Gear reduction drive systems - Vertical processing tower - Electric drive motors - Control cabinets - Automated wire handling system Application: - Reinforcement wire processing - Welded mesh production - Steel wire straightening - Wire cutting operations - Construction mesh manufacturing - Industrial wire preparation Process function: - Wire decoiling from multiple coils - Wire straightening and conditioning - Automatic wire feeding - Wire length preparation fo ...

FEEDSTOCK TUBE   external diameter max.: 90 mm   lenght max.: 14000 mm CHARACTERISTICS DRAWING MACHINE   force: 250 kN   number of parallel trains / strands max.: 3 For Sale: High-Performance Triple Drawing Bench GKZ 250 / 3-19R – Precision, Power & Reliability Offered for sale is a Triple Drawing Bench, type GKZ 250 / 3-19R, manufactured by Bültmann Maschinenbau GmbH & Co. KG, a renowned German company known for high-quality tube drawing technology. This system stands out for its robust design, impressive pulling force, and flexible adaptability for a wide range of tube dimensions and materials. Technical Data Year of Manufacture: 1987 Manufacturer: Bültmann Maschinenbau GmbH & Co. KG Location: Hall 7 / 8 Floor Space: 6 x 35.5 m = 213 m² Installed Power: 355 kW Operating Personnel: 1 person Performance Specifications Number of Tubes per Draw: 1, 2 or 3 Input Tube Outer Di ...

Ulma TFS 200 S This packaging machine uses two rolls of film to produce skin packaging automatically. Workflow: • Heating of the bottom film (inside the forming station) • Shapes of the pack • Placing the product in the package • Heating the skin top film (for skin application) • Performing skin vacuum and package sealing • Cutting the package crosswise and longitudinally • Package application • Residual film winding Technical Specifications Model: TFS 200 S Condition: Exhibition machine (fully functional) Year of Make: 2025 Capacity: Up to 18 packs/minute Packaging Type: Skin Packaging Machine equipment Free insertion distance 760 mm Features ✅ Format 420 x 230mm 3.1 ✅ Maximum product height 55mm (25mm overhang) ✅ Adapter for foil mandrels to 6" ❌ Label dispenser ❌ Printers ✅ Busch vacuum pump 160 m3/h integrated ❌ Do ...

Blister Machine  Manufacturer: Uhlmann Type: UPS4 ETX Year of Make: 2008 Highly flexible blister machine in modular balcony design. The machine has the following standard and optional equipment: Forming foil holder with 2 pneumatic expansion shafts, core diameter 76mm, max. roll diameter 800mm Cutting and gluing table for forming film 3 zones contact heating with 6 individually adjustable heating circuits Heating plates open automatically when machine stops Forming station with 4 columns, lift table guide and pneumatic pre-stretching Filling section 1,360mm long, incl. safety flap Additional safety flap with simultaneous use of a second product feeder Cover foil rinsing with pneumatic expansion shaft, core diameter 76mm, max. roll diameter 300mm Plate sealing station with 4 columns lift table guide, incl. overload protection Automatic lifting of the upper se ...

Description in German The Uhlmann UPS 300 is a fully automatic blister machine with intermittent feed, suitable for packaging tablets, capsules and dragees in blisters. The machine is configured with two film programs: Program 1 for PP/PVC and Program 2 for ALU/ALU. Control is carried out via a panelware control panel with LCD display and keypad. Manufacturer: Uhlmann Pac-Systeme, Laupheim Type: UPS 300 Year of Make: 1997 Power supply: 3/N/PE AC 400 V, 50 Hz Rated current: 19 A, Fuse: 25 A Connected load: 8.0 kW (peak), approx. 5.0 kW (average) Output: up to 50 strokes/min at 10.0 mm drawing depth; up to 35 strokes/min at 18.5 mm drawing depth Film programs: PP/PVC (Prog. 1), ALU/ALU (Prog. 2) Control: Panel fabric with LCD display and keyboard The machine has been removed from a functioning system and is in good optical condition. • The item may have scratches, abra ...

Blister Machine Manufacturer: Uhlmann Type: B1240 Year of Make: 2006 Equipped for ALU/ALU operation, ALU/PVC prepared Format range blister (W x L) min 50 x 22 mm / max. 156 x 115 mm Drawing depth max. 18 mm Output 15 - 50 form cycles/min Transport length 42-115 mm Film width 100-168 mm Moulded foil Ø max. 450 mm, core Ø 76 mm (PVC) / 150 mm (ALU), mech. Tension Cover foil Ø max. 240 mm, core Ø 76 mm, mech. Tension Detection of adhesive joints Foil feed by moulds and by seals Printing Mark Control Film stretching of the cover film Crack and pore control of forming film and cover film Visiotec VisioScan MT-160/200 without heating plate station for PVC moulded film (can be supplied on request at an additional cost) Forming station with compressed air for PVC moulding film, prepared for pre-stretching punches Mechanical forming station for ALU forming film PLC ...

Can be easily adjusted for bead bars of different diameters. The rear bar is higher, so the plate is easy to break in and does not slip away. Auction-ID: A1-47360-307