draw bench used for sale

WWM TS 560/8-1 wire drawing machine was built in 2014 in Italy by WWM Technology Srl (now EJP Italmec Sp. z o.o.). The machine is used in the process of reducing the diameter of various types of wire by pulling it through a series of rollers. Once reduced to the appropriate diameter, the wire is confectioned directly onto a carousel or stand. The wire drawing line consists of the following machines: 1. WWM TS 560/8-1 wire drawing machine 2. WWM SV5 vertical static wire pay-off 3. WWM DSM 01 mechanical descaler 4. WWM AF 1000 wire coiler Wire feeding precision is ensured by the WWM wire pay-off, which consists of two tilting drums and a central column. It enables easy loading of material coils weighing a maximum of 3000 kg each, without stopping the drawing machine. During threading, the sheave and basket are lowered by a hoist with AC motor. The scale on the entire surface of t ...

Qty.1 Second-hand deep drawing press Mfc.: LVD Co. Type: EMF-TWI- 200SP Built: 1982 Stopped production in 2002 Tested in 2012 In operation condition! Max. pressure: 200 T (2000 kN) Max. oil pressure: 300 bar Max. hydr. stroke: 2300 mm Max. distance table – ram: 4500 mm Motor power: 250 HP (187 kW) Table & ram dim.: dia. 300 mm Closing speed: 160/80 mm/sec. Working speed: 3507175 mm/sec. Cushion Max. capacity: 2 x 1000 kN Max. oil pressure: 300 bar Max. hydr. stroke: 2000 mm Table dim.: 1800 x 1800 mm Motor power: 75 HP (56 kW) Plate holder Plate holder dim.: 250 mm Plate holder stroke: 1000 mm Motor power: 25 HP (19 kW), 3 x220 V Weight: 75 Ton Pumps Main pump: 3 x A7V355LV 1RPFHO Pilot pump: Vickers V210-5-1A-10-5214 Tank Volume: 3350 L

DEFILE E 1000 MM. ELECTROLYTE ST. ST 3 A "STEULER" 2500 A, VMAX 15 N/1' VERTICAL ACCUMULATOR INFUSTATOR "FRISH" KG 1500 - 2000 A FUSTO ROLLER FOR CARICO AND SCARICO FUSTI

BECKER & VAN HÜLLEN deep drawing press was built in Germany by Becker & van Hüllen Niederrheinische Maschinenfabrik GmbH & Co. KG. The machine has been continuously maintained and upgraded throughout its service life. In 2022, a major upgrade was carried out, which included replacing the seals, upgrading the control system, installing light curtains and adding a SIEMENS SIMATIC HMI TOUCH touchscreen operator panel. The BECKER & VAN HUELLEN 650T is used in industries specialising in stamping, production of automotive parts, tanks and other parts that require high press force and multi-stage forming. Its main purpose is deep drawing. The machining process is performed with a high press force of up to 650 tonnes. The two-stage design allows successive forming stages to be carried out in a single work cycle, thus enabling the manufacture of parts with even the most complex shapes. The m ...

COMPONENTS OF EACH PLANT: "TECHNOFIL/DE ANGELI" MOD. T 15/25 COMPLETE OF VASCA FOR EMULSIONE RECOTTURA FORNO "TECHNOFIL/DE ANGELI" "TECHNOFIL" FOR BOBINE - 400 SYSTEM OF TRASTIOF FUSTITORS To 8 PLACES FOR T 15/25

VERGELLA SYSTEM TO 2 PLACES PHOTOS SBOZZATOR BIFILARE COPPER "SAMP" A 13 MOD PASSAGES, MT 45.20 VERGELLA 8 MM. MAX 4.5 - MIN 1.13. VMAX 30 N/1' WITH INFUSTATOR, 35 N/1' WITH BOBINATORs. RECOTTURA "SAMP" MOD. R 45.2 N 2 VERTICAL ACCUMULATORS FOR STATIC BOBINATORs N 2 BOBINATOrS STATES CI "SAMP" MOD. SSI/800 FOR BOBINE FROM 630 A800 WITH ROLLER AND MOTORIZED REFORIATOR N 2 VERTICAL ACCUMULATORS FOR INFUSTATORS. N 2 INFUSTATORS "SAMP" MOD. AS/3 FOR 2- 2.5 TON DRUMS. TRAFILERIA "POLO/COSEMA" FROM 15,000 LITRI TO FABRIC NOT FABRIC WITH FORCE RECIRCOLO AND RESTRAINING EXCHANGER1 PLUS 1 SPARE 4 SET OF TWO IN WORKING AND TWO OF SCORTA

No. 3 CAVALLETTI OF A BARRA BOB - 800 SACION OF CESTONI TO 3 PLACES PICK-UP TUB WITH RECIRCULATION PUMP COMPLETE STAGNATURA OF CROGIOL CANAROLA OF RAFFREDDAMENTTO TO PIOGGY 3-PLACE FOR BOBINE - 400 - 560 - 630 MM FUMI SUSATION IMPIANTO ANOD FUSION VASCA

"SAMP" MOD, MM 2 C COMPLETE OF VASCA FOR EMULSIONE. "SAMP" RECOTTURA FORNO. DYNAMIC COLLECTION BOBINATOR FOR BOBINE - 400

Tool trolley, workshop trolley, mobile workshop trolley, drawer cabinet -Width: 560 mm -Depth: 665 mm -Height: 800 mm -Weight: 78 kg

COMPONENTS OF EACH PLANT: TRAFILATRICE "SAMP" 8 FILI MOD. MST/8/21 CABINA COMPLETE RECOTTURA "SAMP" MOD. RC 60 SYSTEM OF SAUNSTICS TO 8 PLACES DOWN VERTICAL AND SCARICO "POLO/COSEMA" FROM 10,000 L. CONTINUE TISSUE/NON FABRIC FILTER

TREFOLATRICI MONOARCO 3000 GIRI "O.M. LESMO", MODEL DTO 630, MATR. 737878/1, 737878/2, BOB COLLECTION : 630 COMPLETE OF PEPMESS "ANDANTEX" TYPE SATORFORSFOR1/8 BOBINE CONIFLIP REREFERES AND LINK WITH BANCAL OF ACUNCUNMENT FOR 48 BOBINEs

Drawer slide, telescopic slide, drawer extension, drawer rails, drawer extension Telescopic slides, extension slides, heavy-duty extension -Retracted length: 600 mm -Extended length: 1100 mm -Width: 14 mm / Height: 24 mm -Price: per pair (left right) -Number: 4 pairs available -Weight: 1.5 kg/piece

UNWORK CENTRE TO 54 MANMOTOR POSTS BOB - 560 ROTANTE COLLECTION FOR BOBINE - 1600 MM BANCAL OF DISTRIBUTION WITH 3 TESTES TO LEGARE

No.2 "O.M. LESMO" No.2 CORDATRICI TORSION "O.M. LESMO" TORSIONE BOBINE 1250 MM No.9 CONSS FOR BOB DIA 1250 AND No. 9 TRANSPALLET ECLTS No.5 BAR ABAR WITH BILANCINO FOR BOB - 1000

CAVALLETTO SVOLGITOR TO BARRA WITH FRENO D. 1500 MM TUBOLARE CORDAR To SILURO "DE ANGELI" MOD. CS 12 to 12 CULLE - BOBINE 560 MM GIRI 500N/1' COUNTERMETERS VOLANO OF TIRO - 1500 "DE ANGELI" 2000

SVOLGITOR TO BARRA "DE ANGELI" FOR BOBINE SILURO CORDATRICE 4 PLACES "DE ANGELI" FOR BOBINE : 1 000 GIRI 200 N/1' VOLANO OF TIRO - 1500 COUNTERMETERS "DE ANGELI"

Drawer slides, telescopic slides, drawer pull-outs, heavy-duty pull-outs, drawer slides, drawer pull-outs, telescopic slides, pull-out slides -Retracted length: 695 mm -Length extended: 1227 mm -Price: per pair (left right) -Number: 5x pairs available -Weight: 1.8 kg

Drawer rail, telescopic rail, drawer extension, drawer rails, drawer extension, telescopic rails, pull-out rails -Rail height: 61 mm -Length retracted: 516 mm -Length extended: 985 mm -Price: per pair (left right) -Number: 2x pairs available -Weight: 2.45 kg

High-performance deep-drawing packaging machine from MULTIVAC - ALSO SUITABLE FOR HARD FOIL - Film width 420mm - With many extras - Double format (thus 2x speed)

Type: MUTIVAC R 530 Film type: flexible Bottom film width: 625 mm Top film width: 610 mm Cut-off length: 657 mm Pack sizes: 2.1 (2 pack.: 640 x 267 mm) Max.depth: 200 mm Vacuum pump: 250 m3/h Length: 8500 mm

Tool drawer cabinet Manufacturer Lista Width 100 cm Depth 80cm Height 100cm 9 drawers, of which 6 with full pull-out Very good condition according to photos Other cabinets also with smaller dimensions in stock!

Format trolley for storing format parts for deep drawing machines made entirely of stainless steel with three drawers, a drawer and a storage surface, mobile with brake rollers Extracts resilient with 30 kg and with food-approved plastic, as well as the tray bevelled construction prevents the car from tilting. Format trolley is used for the proper storage of formats with all accessories. All parts are located in one place and can be driven to the machine when changing formats. Dimensions: 1250x900/600x1100 mm (WxDxH)

Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet -stable tool cabinet -2x shelves: extendable -Dimensions: 500/600/H830 mm -Weight: 36 kg

range L-W-H: 675 x 510 x 880 mm weight: 56 kg : 5 St. Professional tool trolley for workshop equipment. Internal dimensions of the upper 4 drawers 56 x 43 x 10 cm. Inner dimensions of the lower drawer 56 x 43 x 17 cm. Dimensions of the wheels 100 x 30 mm. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 8 St. range L-W-H: 710 x 510 x 900 mm weight: 67 kg Drawer cabinet with 8 drawers Drawer dimensions 600 x 435mm Drawer height: Drawer 1 - 7, 81mm Drawer 8, 173mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

groove width: 3 - 90 mm drawing length: 430 mm working speed: 4 - 12 m/min slot-milling length: 400 mm return speed: 15 m/min total power requirement: 5,5 kW weight of the machine ca.: 1,4 t dimensions of the machine ca.: 1,3 x 1,7 x 1,5 m • div. pull broaches and guidances The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Packaging thermoforming machine (thermoformer, roll packing machine) characterized by the production of packaging from two rolls of foil. Depending on the type of machine and the foil used, the packages may be soft or hard. Machines intended for packing food and non-food products. Producer: Multivac; Model: CD6000 MC; Year of production 1997; SKIN packing machine; Working only with hard foil; Incomplete machine (see photos) Bottom foil: +/- 460 mm (approx); Upper foil: +/- 450 mm (approx); Molding length: 492mm; Forming width: 408mm; Molding depth: 15mm; Formats: 3.2; Length: 7200 mm; Width: 1100 mm; Height: 2000 mm; Weight: 1700 kg.

Drawbar, drawbar, truck trailer -Max. Load: 55,000 kg -Bearing: 98 mm -Inner dimensions bearing: 882 mm -Drawbar length: 1600 mm -Eye: Ø 49 mm -Drawing with the pictures -Transport dimensions: 1100/1600/H260 mm -Own weight: 86 kg

Packaging thermoforming machine (thermoformer, roll packing machine) characterized by the production of packaging from two rolls of foil. Depending on the type of machine and the foil used, the packaging can be soft or hard. Machines intended for packing food and non-food products. Producer: VERIPACK; Model: TX 12/121; Year of production 1991; Working with soft foil; Bottom foil: +/- 415 mm (approx); Upper foil: +/- 405 mm (approx); Molding length: 395mm; Forming width: 368mm; Molding depth: 90mm; Formats: 1.2; Length: 6500 mm; Width: 1100 mm; Height: 2000 mm; Weight: 1600 kg - the machine is dismantled; - technical condition - good; - yes, there is original documentation, CE certificate, CE nameplate and a general list of inputs and outputs.

Packaging thermoforming machine (thermoformer, roll packing machine) characterized by the production of packaging from two rolls of foil. Depending on the type of machine and the foil used, the packages may be soft or hard. Machines intended for packing food and non-food products. Producer: Multivac; Model: R5200; Year of production 1989; Working with soft or hard foil; Bottom foil: +/- 420 mm (approx); Upper foil: +/- 415 mm (approx); Molding length: 182mm; Forming width: 370 mm; Molding depth: 70mm; Formats: 3.1; Length: 5800 mm; Width: 1000 mm; Height: 1800 mm; Weight: 1400 kg.

Packaging thermoforming machine (thermoformer, roll packing machine) characterized by the production of packaging from two rolls of foil. Depending on the type of machine and the foil used, the packages may be soft or hard. Machines intended for packing food and non-food products. Producer: CFS; Model: TIROMAT Compact 420; Year of production 2001; Working with soft foil; Bottom foil: +/- 420 mm (approx); Upper foil: +/- 410 mm (approx); Molding length: 430mm; Forming width: 380mm; Molding depth: 130 mm; Formats: 2.2; Length: 6700 mm; Width: 1100 mm; Height: 2000 mm; Weight: 1600 kg

Packaging thermoforming machine (thermoformer, roll packing machine) characterized by the production of packaging from two rolls of foil. Depending on the type of machine and the foil used, the packages may be soft or hard. Machines intended for packing food and non-food products. Producer: Multivac; Model: R230; Year of production 2002; Machine designed for packing sandwiches; Working only with hard foil; Bottom foil: +/- 320 mm (approx); Upper foil: +/- 315 mm (approx); Molding length: 165mm; Forming width: 80mm; Molding depth: 80mm; Formats: 3.1; Length: 5800 mm; Width: 1000 mm; Height: 2100 mm; Weight: 1500 kg.

Packaging thermoforming machine (thermoformer, roll packing machine) characterized by the production of packaging from two rolls of foil. Depending on the type of machine and the foil used, the packages may be soft or hard. Machines intended for packing food and non-food products. Producer: Multivac; Model: R270 CD; Year of production 2004; SKIN packing machine; Working only with hard foil; Bottom foil: +/- 420 mm (approx); Upper foil: +/- 415 mm (approx); Molding length: 244mm; Forming width: 364 mm; Molding depth: 80mm; Formats: 2.1; Length: 6800 mm; Width: 1100 mm; Height: 2100 mm; Weight: 1600 kg.

Packaging thermoforming machine (thermoformer, roll packing machine) characterized by the production of packaging from two rolls of foil. Depending on the type of machine and the foil used, the packages may be soft or hard. Machines intended for packing food and non-food products. Producer: Multivac; Model: R530; Year of production 1996; Working only with hard foil; Bottom foil: +/- 465 mm (approx); Upper foil: +/- 455 mm (approx); Molding length: 192mm; Forming width: 404mm; Molding depth: 40mm; Formats: 4.2; Length: 7000 mm; Width: 1100 mm; Height: 2100 mm; Weight: 1600 kg.

Packaging thermoforming machine (thermoformer, roll packing machine) characterized by the production of packaging from two rolls of foil. Depending on the type of machine and the foil used, the packages may be soft or hard. Machines intended for packing food and non-food products. Producer: VERIPACK; Model: FREEDOM / F140; Year of production 2004; Working with soft or hard foil; Bottom foil: +/- 420 mm (approx); Upper foil: +/- 410 mm (approx); Molding length: 256mm; Forming width: 386mm; Molding depth: 120mm; Formats: 2.2, 3.2; Length: 7500 mm; Width: 1100 mm; Height: 2000 mm; Weight: 1600 kg.

Packaging thermoforming machine (thermoformer, roll packing machine) characterized by the production of packaging from two rolls of foil. Depending on the type of machine and the foil used, the packages may be soft or hard. Machines intended for packing food and non-food products. Producer: Multivac; Model: CD6000 MC; Year of production 1996; SKIN packing machine; Working only with hard foil; Incomplete machine (see photos) Bottom foil: +/- 460 mm (approx); Upper foil: +/- 450 mm (approx); Molding length: 266mm; Forming width: 408mm; Molding depth: 15mm; Formats: 3.1; Length: 6500 mm; Width: 1100 mm; Height: 2000 mm; Weight: 1600 kg.

Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet -Drawers: 2 -Storage: 1 -Brackets for: SK40/SK50 milling holders -Dimensions: 660/1030/H1200 mm -Weight: 190 kg

Capacity, ton 1250 Stroke, mm 500 Maximum drawing depth,mm 200 Min number of no-load stroke: 14 /per min Slider adjustment, mm 315 Max. shut height between bolster plate and slider (stroke down, adjustment up), mm 1250 Table size, mm 1600 x 1800 Slider size, mm 1530 x 1800 Aperture in a table, mm 1100 x 1100 Distance between columns, mm 1600 Cushion travel, mm 200 Cushion capacity, ton 200 Maximum push force ton 31.5 main motor power, kW 125 Press overall dimensions: 5850x3100x8950 mm Press weight, kg 195000

MECA Thermoformer Type: 650 Number: T02126 Year of construction: 07/04 Distance between chains: 500 mm Dye's: (4x) 210 mm x 170 mm, total dimensions: 7300 mm x 1300 mm x 2470 mm Including large amount of parts.

used thermoforming machine TYPE Powerpak NT 420 year 2011 for sale Machine was taken out of production - ran to the last. Foil width 420 VZ 590 mm Price on request

Machine type: Pipe drawing machine / line Working area: pipe diameter: 4-40mm, Wall thickness: 0.4-3 mm, Pipe length: 3,000-8,000 mm Speed: 60-80m/min Make: Bültmann Type: Pipe drawing machine type GKZ 080/01-10 Year of construction: 1995 Location: NRW Length 25,660 mm (entire system) Width 6,750 mm (entire system) Country of origin: Germany Delivery time short

: 8 St. range L-W-H: 720 x 580 x 1000 mm weight: 128 kg : 100Kg je Lade The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 6 St. range L-W-H: 880 x 580 x 800 mm weight: 126 kg : 100Kg je Lade The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

DIXIE UNION, DIXIEVAC2000 Thermoformer, 400 Volt, 50 HZ, in working condition

Drawbar, drawbar, overrun brake -Height-adjustable drawbar -crooked -with overrun brake -Support load: 100 kg -Maximum permissible total weight: 1000 kg -Number: 12x drawbars available -Price: per piece -Weight: 40 kg

Multivac R 230, year of manufacture 2001, film width 355 mm, draw-off length 210 mm, free loading section of 1,6 m, MC96II control with LCD monitor, 10 mm side trim, two cross-cut guillotines, height-adjustable discharge conveyor, central chain lubrication, new servo inverter for chain feed, Vario tool with interchangeable formats. Format: 1.1 . 335 mm x 210 mm 2.1 - 167.5 mm x 210 mm 2.2 - 167.5 mm x 105 mm 3.1 - 111.66 mm x 210 mm Total length of the machine 5,15 m Operational and wear parts replaced.

Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet -Width: 450 mm -Depth: 630 mm -Height: 1035 mm -Internal drawer dimensions: 330 x 630 mm -Drawer heights: 260 mm -Weight: 216 kg

Lista Drawer Cabinet with Milling Tool Lista Drawer Cabinet Number of drawers: 13 Pull-out type: Full extension Very high load-bearing capacity due to precise and stable construction made of high-quality, welded sheet steel Body colour: Reseda green, RAL 6011 Load capacity per drawer: 200 kg External dimensions W x D x H: 870 x 725 x 1450 mm Content: Metal Circular Saw Blades Cross-toothed and coupled disc milling cutters Cross-toothed disc milling cutter Angle semi-circular cutter Dovetail cutter Semi-circular milling cutter Thread milling cutters More items - new and used - can be found in our shop! International shipping costs on request!

pressure: 40 t distance between columns: 695 bzw. 215 mm stroke: 100 mm table surface area: 650 x 440 mm ram surface: 580 x 285 mm dayligth: 400 mm total power requirement: 15 kW weight of the machine ca.: t dimensions of machine L x W x H: 1,63 x 1,05 x 2,61 m - with die cushion - with light bareer make SICK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MALMEDIE DIE Adjustable drawing speed with inverter • Minimum worked diameter 15 mm • Maximum worked diameter 25 mm • External dimension coils 1,250-1,300 mm • Internal dimension coils 800-900 mm • Length 700-1,300 mm • Weight 1.500 Kgs • Wire surface treatment bonderized with soaped • Tensile resistance approx 500 N/mm2 The drawing machine normally work the raw material over mentioned with the follow specification: • Number of drawing passage 1 • Drawing die sizes 120x45 mm • Lubricant now used oil • Max area reduction 6 to 8 % • Drawing speed adjustable with inverter