draw bench used for sale

bore capacity in steel (diameter): 25,0 mm throat: 180 mm bore stroke: 80,0 mm morse taper: 2 MK turning speeds: 180 - 2270 U/min table-size: 305 x 305 mm swivelling +/-: 45 Grad T-slots: 16,0 mm column diameter: 72,0 mm voltage: 400 V total power requirement: 1,1 kW weight: 57,0 kg range L-W-H: 400 x 630 x 990 mm scope of delivery - Keyless chuck 1 - 16 mm / B 18 - Drill chuck arbor MK 2 / B 18 - Digital quill stroke display - machine light - Right-left rotation - protective cover - Height-adjustable protective cover - T-nuts - operating tool The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 32.0 mm threading: max. M 24 throat: 265 mm bore stroke: 150 mm turning speeds: 320 - 1820 U/min morse taper: 3 MK table-size: 332 x 332 mm T-slots: 14.0 mm column diameter: 100 mm : 400 x 380 mm distance spindle/base plate: max. 735 mm voltage: 400 V total power requirement: 2.2 kW weight: 246 kg range L-W-H: 520 x 920 x 1380 mm Description: - robust table drilling machine with thread cutting device - very smooth running thanks to pulleys made of gray cast iron - drive: V-BELT - quality ball bearings ensure a high concentricity of the spindle - large drilling table with diagonally running T-slots - drilling table height adjustment via rack - thread cutting device - powerful and high-torque aluminum motor in accordance with IP 54 - standard with T-slots in the ground base plate - ergonomic handles for comfortable working - foldable drilling spindle guar ...

bore capacity in steel (diameter): 18.0 mm throat: 190 mm bore stroke: 80 mm morse taper: 2 Kurzspindel MK turning speeds: 225 - 4.300 U/min voltage: 400 / 50 Hz Volt table:: 300 x 240 mm column diameter: 65 mm engine output: 0.37 / 0.55 kW weight: 110 kg Furnishing: - Large spindle speed range - stepless speed adjustment - machined base plate - Electrically secured spindle protection - Main switch lockable with motor protection switch - Reversing switch for clockwise and counterclockwise rotation - Operating instructions in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 25.0 mm throat: 255 mm bore stroke: 120 mm morse taper: 3 MK turning speeds: 105 - 2900 U/min table:: 395 x 420 mm column diameter: 100 mm threading: max. M10 voltage: 400 / 50 Hz V weight: 140 kg range L-W-H: 500 x 570 x 1100 mm Furnishing : - Keyless chuck 1 - 16 mm / B 16 - Drill chuck arbor MK 3 / B 16 - Reducing sleeve MT 3/2, MT 3/1 - Digital drilling depth display - Automatic tool ejector - Right-left rotation device - Height-adjustable protective cover The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 24320 Specifications: - Drilling capacity - in steel 13 mm - - in aluminium 15 mm - Drilling spindle holder MK 1 - Drilling depth 70 mm - Projection spindle / column 180 mm - 5 drilling spindle speeds 480 - 4000 rpm - Drive 400 V / 0.45 kW - Height adjustment Drilling table with T-slots 250 x 220 mm - Distance between drilling spindle / table approx. 270 mm - Machined base plate with T-slots 170 x 170 mm - Space requirement approx. W 400 x H 700 x D 500 mm - Weight approx. 100 kg - with keyless chuck 1 - 13 mm

MW TECHNOLOGIES BENCH TOP INSPECTION SYSTEM, MODEL MIH-DX Year of construction: 2006 Machine for the inspection of vials, ampoules and other components for particulate particles. Optimized for small workstations, laboratories or production lines, suitable for integration in GMP-controlled environment. Stainless steel construction. As the unit is rated 115 V/60 Hz, for operation in Europe (230 V/50 Hz) adapter or transformer may be required unless internal wiring has been converted. 7 units of this machine are available. CHARACTERISTICS Enclosed hood with viewing window and adjustable lighting system Controls on front panel: power switch, lighting selector, intensity dial Lighting: On/off selection, intensity adjustment knob (as visible in photo) ENERGY CONSUMPTION Voltage: 115 V AC (standard US mains); Current: 5 A; Frequency: 60 Hz; Phase: single phase  ...

evopro Test Bench Printing AmbientLight P585 Manufacturer: evopro systems engineering AG Description: Test bench printing AmbientLight Project No.: P585 Serial number: 0001 Year of Make: 2017 Feed-in: 230 V / 50 Hz / 13 A (L+N+PE) Design: Closed test bench for printed AmbientLight modules Structure: Aluminum Profile Rack With Complete Test Cabin Application: Optical and functional testing of lighting or AmbientLight components

Round end tenoner with 2 benches BALESTRINI mod. PICO - Maximum tenon size: 100 x 30 mm - Maximum table tilt: 20° - Workpiece support guide tilt: 45° - Hourly production: 600/700 tenons - Cutter rotation: 9,000 rpm - Cutter motor power: 4 hp

All items are sold on condition `as is and where is`. Ex work from current location excluding de-installation, de-hook up, discharge, packaging, crating and delivery. We are not responsible for any damage incurred during shipment.

Product protection workbench with horizontal, low-turbulence displacement flow. ISO Class 5 with UV-Light.

Inv. Num. : 9019 Type: W 100 A Producer: TOS Generated: Parameters: Work table length: 1250 mm Work table width: 1250 mm X-axis travel: 1600 mm Y-axis travel: 1120 mm Travel travel Z-axis: 1250 mm

High Speed Bench Drill, Made in Germany -Clamping table: 290 x 225 mm -Travel distance: 150 mm with hand crank -Spindle mount: Drill chuck included -Drilling capacity in steel D 1 - 6 mm -Projection: 180 mm -Speeds: 900 - 10,000 rpm 8 steps -Column: Diameter 75 mm -Spindle stroke: 60 mm, with fine stop -Voltage: 380 V -Dimensions: 640/330/H740 mm -Weight: 92 kg

Drill press, drill press, stand drill, pillar drill -Manufacturer: WMW, column drilling machine type CM 10S/55 -Motor: 630 W -Speeds: 460 - 2190 rpm -Translation: via V-belt -Table size: 220 x 280 mm -spindle taper: MK1 -Spindle stroke: 70 mm -Projection: 200 mm -Pillar Ø: 85 mm -Dimensions: 400/800/H1670 mm -Weight 206 kg

Bench drill, bench drill, column drill, pillar drill -Manufacturer: Ixion, bench drill type BT 6 -Clamping table: 290 x 225 mm -Travel: 150 mm -Spindle mount: drill chuck -Projection: 180 mm -Speeds: 1080 - 12000 rpm 8 levels -Column: diameter 75 mm -Spindle stroke: 60 mm, with fine stop -Motor: AEG 0.37 / 0.6 kW -Voltage: 380V -Dimensions: 640/330 / H740 mm -Weight: 92 kg

Drilling machine, bench drill, pillar drill, column drill -Handover: in its current condition as inspected -Motor: HEW 0.8 kW -Table size: Ø 355 mm -Spindle mount: MK3 -Travel distance: 500 mm -Protrusion: 300 mm -Columns: Ø 110 mm -Spindle stroke: 150 mm -Translation about: V-belt -Dimensions: 850/500/H1850 mm -Weight: 294 kg

bench drill, pillar drill, column drill -Manufacturer: AEG, Bench drill type DTBK-10 -Clamping table: 175 x 175 mm -Spindle mount: Drill chuck B16 -Protrusion: 200 mm -Column: Diameter 60 mm -Spindle stroke: 70 mm -Motor: 0.25 kW / 2800 rpm -Voltage: 380 V -Dimensions: 580/590/H730 mm -Weight: 60 kg

Bench drill, pillar drill, column drill, column drill -Manufacturer: WMW Heckert, bench drilling machine type BT 12/1 with base frame -Clamping table: 340 x 280 mm -Travel: 370 mm -Spindle holder: MK2 -Projection: 215 mm -Speeds: 224/450/900/1800 rpm -Column: diameter 92 mm -Spindle stroke: 100 mm / depth stop with fine adjustment -Motor: VEB 0.4/0.7 kW with brake -Voltage: 380 V -Dimensions: 620/480/H1710 mm -Total weight: approx. 182 kg

Bench drill, stand drill, pillar drill, pillar drill -Manufacturer: Ixion, bench drill type BT13ST -Clamping table: 170 x 170 mm -Travel: 210 mm -Spindle holder: drill chuck B16 -Projection: 180 mm -Speeds: 420 - 2100 rpm stepless -Pillar: diameter 65 mm -Spindle stroke: 70 mm, with fine stop -Motor: AEG 0.7/1.0 kW -Voltage: 380V -Dimensions: 620/235/H800 mm -Weight: 70kg

Bench drill, stand drill, pillar drill, pillar drill -Manufacturer: Flott, bench drill type M2 ST -Clamping table: 260 x 200 mm -Travel: 310 mm -Spindle holder: MK2 with drill chuck 3-16 mm -Projection: 240 mm -Speeds: 400 - 3500 rpm -Pillar: diameter 82 mm -Spindle stroke: 100 mm, depth stroke with fine adjustment -Motor power: 0.75 kW -Voltage: 400V -Dimensions: 750/340/H1100 mm -Weight: 135 kg

Double bench grinder, double grinder, bench grinder, bench grinder -Manufacturer: Rema, double bench grinder type DS 12/200 A with sanding dust extraction -Grinding discs: max. Ø 200 x 32 mm -Motor power: 0.9 kW -Speed: 2900 rpm -Operating voltage: 220/380 volts -Dimensions: 480/450/H1060 mm -Weight: 143 kg with pallet

Double bench grinder, double grinder, bench grinder, bench grinder -Manufacturer: ESB, double bench grinder type DS 200 -Grinding discs: max. Ø 200 x 32 x 32 mm -Motor power: 0.9 kW -Speed: 3000 rpm -Receptacle: Shaft Ø 20 x 33 mm, see photos -Operating voltage: 220/380 volts -Dimensions: 490/195/H220 mm -Weight: 15 kg

Bench drill, pillar drill, column drill, column drill -Manufacturer: WMW Heckert, bench drilling machine type BT 2 -Clamping table: 340 x 280 mm -Travel: 350 mm -Spindle holder: MK2 -Projection: 215 mm -Speeds: 355/710/1400/2800 rpm -Column: diameter 93 mm -Spindle stroke: 100 mm / depth stop with fine adjustment -Motor: VEM 0.8/1.0 kW with brake -Voltage: 380 V -Number: 2x drill available -Price: per piece -Dimensions: 550/480/H1270 mm -Weight:157 kg/piece

Drilling machine, bench drill, pillar drill, column drill -Manufacturer: Flott, Pillar drill type 23 mm -Spindle mount: MK3 -Motor: 1.1 kW -Speed adjustment: via V-belt -Speeds: 200 - 2000 rpm -Table size: 300 x 300 mm -Travel distance: 440 mm -Spindle stroke: 145 mm -Protrusion: 300 mm -Column Ø: 125 mm -Dimensions: 900/450/H1900 mm -Weight: 306 kg

Double bench grinder, double grinding machine, pedestal grinder, bench grinder, belt grinder, belt sander, edge grinder, edge grinding machine -Belt sander: Manufacturer Grit, sanding belt 75 x 2000 mm -Motor: Teknodan 3 kW 2850 rpm -Grinding bench: Manufacturer Flott, double grinding bench type 702 1 /2/200 x 32 x 51 -Grinding discs: Ø 200 mm -Motor: AEG 0.6 kW 2800 rpm -Submission/Price: complete -Overall dimensions: 1000/900/H1685 mm -Total weight: 228 kg

Drilling machine, bench drill, pillar drill, column drill -Manufacturer: Flott, pillar drill type SB 32 ST-FB suitable for flowdrill -Spindle mount: MK3 -Motor: 3.0 kW -Speed adjustment: stepless with digital display -Speeds: 80 - 4000 rpm -Table size: 500 x 360 mm -Travel distance: 450 mm -Spindle stroke: 160 mm with digital display -Protrusion: 300 mm -Column Ø: 125 mm -Dimensions: 940/590/H1920 mm -Weight: 367 kg

Drilling machine, bench drill, pillar drill, column drill -Manufacturer: Alzmetall, Pillar drilling machine type AX2 S -Spindle mount: MK2 -Motor: 0.37 / 0.55 kW -Speed adjustment: stepless -Speeds: 450 - 4300 rpm -Table size: 250 x 250 mm -Travel distance: 560 mm -Spindle stroke: 90 mm -Protrusion: 250 mm -Column Ø: 90 mm -Dimensions: 720/540/H1650 mm -Weight: 145 kg

with cross-table Max drill capacity: dia 40 mm Table dimensions: 900 x 260 mm SPEEDS: 65 > 2400 rpm

2x2x2m 650 C and 1200 C PLC

some steel cabinets/tool cabinets for sale. Prices and pictures are available at: inventar-verkauf.de/id/alesco

Different variants of workbenches for sale. Prices and pictures are available at: inventar-verkauf.de/id/alesco

WTW inoLab Oxi 7310 Benchtop Oximeter With CELLOX 325 oxygen sensor OD Accuracy: ±0.5% OD Concentration: 0.00 - 20.00 / 0 - 90 mg/L Dissolved oxygen - saturation: 0.0 - 200.0 / 0 - 600% (±0.5%) Dissolved Oxygen - Barometric Pressure Range: 0 - 200.0 hPa / 0 - 1250 hPa Temperature range: 0.0...+50.0 °C Temperature accuracy: ±0.1°C Power supply: Universal power supply, 4×1.5 V AA batteries or 4×1.2 V NiMH rechargeable battery Data Acquisition - Capacity: 500 in manual mode/5000 in automatic mode In good condition

Benchtop centrifuge ROTOFIX 32 Hettich laboratory In excellent working condition Reference : 1205 Technical specifications: Voltage: 208 - 240 V 1 ~ Frequency: 50 - 60 Hz Power: 160 W Maximum capacity: With swivel rotor: 4 x 100 g Max. Speed: 6,000 min-1 Dimensions (H x W x D): 257 x 366 x 430 mm Weight: approx. 23 kg With oscillating free rotor 1624 With 2 HETTICH 1369 pods for 4 tubes of 6/7ml Ø12 x 82/100 mm With 2 HETTICH 1346 pods for 2 x 20ml tubes Max. Speed: 4000 rpm Year of Manufacture: 2000

Lard lathe Turning length approx. 2000 mm Turning diameter approx. 1100 mm Center height approx. 450 mm without machine table Basic thread M 55 with M 33 adapter for standard chuck with 5 face plates of 100 – 600 mm diameter was used to turn molds for a foundry. Weight approx. 2800 kg

Key data: 20 mm

0.75 KW 380 V 16 A Röhm Drill Chuck Supra 1 - 13 mm Speed 210 - 2580 rpm With substructure Length 74 cm Width 30 cm Height 98 cm

A compact Optimum bench column drilling machine is available. Motor power: 750W, drilling capacity steel: 25mm, continuous drilling capacity: 20mm, spindle taper: MK2, T-slots: 12mm, table dimensions X/Y: 280mm/245mm, quill stroke: 80mm, throat depth: 180mm, column diameter: 73mm, spindle to drilling table distance: 425mm, spindle to base distance: 618mm, speed: 2440rpm. Machine dimensions X/Y/Z: approx. 660mm/330mm/1020mm, weight: approx. 70kg. Without a drill chuck and drill chuck guard. Documentation available. An on-site inspection is possible.

Double bench grinder on wall bracket 230 V

Changing bench aluminium approx. 200 cm

Waiting group benches wood grey, seat fabric coloured, 3 double seaters, 1 single seat, side table

Series No.: 803852, speed max. 2,500 / 3,000 rpm, spindle stroke max. 80 mm Auction-ID: A1-46666-536

Polishing trestle Connection voltage 400Volt Diameter of polishing wheelsmax 250mm. Speed 2800 rpm. with base frame and cooling basin Condition: unchecked (6) Auction-ID: A7-46642-228

Drilling machine, bench drill, pillar drill, column drill, box-type drill, tapping machine, threading machine -Manufacturer: Strands, MK3 bench drill with cross table Demanders -Motor: 0.75/1.0 kW -Speeds: 100 - 30200 rpm, 8-stage forward/reverse rotation -Thread cutting device: via foot switch -Table size: 500 x 195 mm -Cross table travel: X360 mm Y160 mm Z440 mm -Spindle mount: MK3 -Spindle stroke: 135 mm -Protrusion: 255 mm -Dimensions: 780/800/H1540 mm -Weight: 218 kg

- Version for 3 lt bottle (double magnum) - for champagne capsule - works by pneumatic operation with 2 passages: -- First passage: pleating. -- Second passage: smoothing. Production:? 100 bottles/hour Workable materials:? Bottles 3 Lt - Capsules with max. length 150 mm Dimensions:? 90 x 55 x 30 cm (length x width x height) Weight: 25 Kg

Operating voltage: 220/380 V Frequency: 50 Hz Rated current: 4.0/2.3 A Speed: 1450 rpm Grinding wheel dimensions: 300/50/76 mm Reference: Schönichen - Lot 88 Auction-ID: A7-46763-295

Spindle speed: from 220 to 4500 rpm Drilling depth up to 100 mm Table dimensions: 280 x 220 mm This is an article from a training workshop Reference: Training workshop - Lot 1 Auction-ID: A7-46763-244

Machine number: 133979 Speed range: 900 - 10,000 rpm Table dimensions: approx. 200 x 200 mm Auction-ID: A7-46287-35

Speed: 2800 rpm Connection: 0.8 kW Operating voltage: 220/380 V Frequency: 50 Hz Grinding wheel diameter: 180 mm Grinding wheel width: 30 mm Reference: Beeper - Lot 69 Auction-ID: A7-46763-27

right working side equipped with belt sander left working side equipped with polishing brush revolutions: 1400/2800 rpm for further technical data see photographed nameplate Auction-ID: A7-46287-227

Dimensions grinding wheel 125x16x12.7 mm Auction-ID: A1-46781-38

Machine number: 00121330 Speed range: 80 - 1400 rpm Table dimensions: 350 x 300 mm Auction-ID: A7-46287-33

Dimensions grinding wheel 175x25x32 Auction-ID: A1-46781-39