draw bench used for sale

Double bench grinder GISAG SE 2x400/1 TGL 24500 Disc diameter: Ø max 400 mm 4 kW 380 V Protective cover is missing !' used, tested !' Dimensions: 1100 x 700 x 1200 mm

166X75 / 88X70CM Auction-ID: A1-47137-121

TABLE: 140X80X75CM / BENCH: 120X35X46CM Auction-ID: A1-47137-128

Specifications: Drill Diameter: 1.5 - 3 Drill chuck holder: B16 Spindle stroke: 50 mm Projection: 150 mm Column diameter: 46 mm Motor power: 350 W Connection: 230 V Dimensions (WxDxH), approx.: 220 x 450 x 590 mm Weight, approx.: 55 kg Equipment: - Machined foot with T-slots - Sprocket chuck

Saw blade diameter: 750mm, saw blade speed: 2200/min, table dimensions: 1500x1500x900mm, cutting height 90°/45°/30°: 295/200/137mm, motor power: 16kW, length: 1800mm, width: 1500mm, height: 1100mm, weight: 650kg. On-site inspection is possible.

Bosch Rexroth workstation 4800 x 700 x 880 mm 2 x Bosch Rexroth worktop 2400 x 700 x 40 mm Worktops with hard laminate coating suitable for high mechanical stress on the tabletop surface \u2012 Very abrasion-resistant – High impact resistance and scratch resistance – Resistant to organic solvents, weak acids and alkalis, gasoline and oil – Short-term resistant up to 180 °C 3 x Lista Drawer Cabinet Number of drawers: 5 1 x 50, 2 x 100, 1 x 150, 1 x 300 mm Width outside: 560 mm Depth outside: 720 mm Exterior height: 840 mm More items - new and used - can be found in our shop! International shipping costs on request!

Benchtop centrifuge cooled Manufacturer: Hettich Type Rotanta 460 R Year of construction 2017 Rated voltage 220-240 V 1 Connected load 1,800 VA Max. capacity 4x 1,000 ml Weight approx. 141 Kg Temperature control, infinitely variable from -20 to +40 °C Including 6-fold angle rotor Dimensions: 770x706x456 mm, weight 141 kg Documents available

packet weight: 900 kg x-travel: 200 mm number: 3 Stück : 2x AEG mit Steinen : 1x FAG mit Magnet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Auction-ID: A1-41277-682

166X75 / 88X70CM Auction-ID: A1-47137-122

Specifications: - Drilling capacity in wood 40 mm - Drilling capacity in steel 18 mm - Drilling spindle holder MK 2 - Quill stroke 120 mm - Drilling spindle speeds infinitely variable in steps - 60 - 2840 rpm - Max. distance table – drilling spindle 600 mm - Boom / unit tiltable left + right 45° each - Boom / unit swivel left + right - Table size 450 x 450 mm - Drive 400 V / 0.33 / 0.55 kW - Space requirement approx. W 500 x H 1870 x D 1200 mm - Weight approx. 150 kg

Auction-ID: A1-41998-185

In its original box. Never used. Auction-ID: A1-46992-11790

In its original box. Never used. Auction-ID: A1-46992-10570

In its original box. Never used. Auction-ID: A1-46992-11510

In its original box. Never used. Auction-ID: A1-46992-10410

In its original box. Never used. Auction-ID: A1-46992-12270

In its original box. Never used. Auction-ID: A1-46992-10720

In its original box. Never used. Auction-ID: A1-46992-10020

In its original box. Never used. Auction-ID: A1-46992-11080

Auction-ID: A1-46933-53

In its original box. Never used. Auction-ID: A1-46992-10880

Optimum Optidrill DH 32GSV Admission in drilling-spindle (morse): Mk3 Max drill capacity: 30 mm Table dimensions: 420 x 400 mm SPEEDS: 40 > 3000 rpm Max drilling depth: 125 mm Motorpower: 2,2 kW Length: 820 mm Depth : 450 mm Height: 2230 mm Weight: 324 kg

Defect needs to be restarted Auction-ID: A3-43544-5215

In its original box. Never used. Auction-ID: A1-46992-12300

Auction-ID: A1-47084-7

In its original box. Never used. Auction-ID: A1-46992-11150

bore capacity in steel (diameter): 2...20 mm throat: 210 mm bore stroke: 100 mm total power requirement: 1,1 kW weight of the machine ca.: 0,165 t dimensions of the machine ca.: m - spindle taper: MK 2 - max. drilling capacity: 2 ... 20 mm - distance center drill spindle to column : 210 mm - distance from spindle to table : 400 mm - max. stroke of spindle: 100 mm - adjustment of spindle stock 250 mm - table size: 340 x 280 mm - 4 speeds of drilling spindle: 355 ...2800 per minute - rated power: 1,1 kW - weight: 165 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

In its original box. Never used. Auction-ID: A1-46992-11950

bore capacity in steel (diameter):10 mm throat:210 mm bore stroke:100 mm total power requirement:0,7 kW weight of the machine ca.:302 kg dimensions of the machine ca.: 620 x 800 x 1950 mm Table dimensions:350 x 250 mm spindle speeds::250, 355, 710, 1000, 1400, 2000, 2500 U/min

Operating voltage: 220/380 V Frequency: 50 Hz Rated current: 1.4/0.8 A Connection: 300 W Speed: 3000 rpm Grinding wheel dimensions: 175 x 25 x 32 mm Reference: Apprentice workshop part 2 - Lot 3

BFTech JZ-25 Max drill capacity: 25 mm Belt - vario (from -- to): 240 > 2710 rpm Height: 1100 mm

Ibarmia EAP 60 Mk5 Admission in drilling-spindle (morse): Mk5 Max drill capacity: dia 70 mm SPEEDS: 50 > 1004 rpm

right working side equipped with belt sander left working side equipped with polishing brush revolutions: 1400/2800 rpm for further technical data see photographed nameplate

Machine number: 00121330 Speed range: 80 - 1400 rpm Table dimensions: 350 x 300 mm

Serial number: EB035487 Nominal speed: 2400 rpm with a swivelling work table Table dimensions: approx. 170 x 170 mm Speed range: 280 - 2350 rpm Reference: Hansmann - Lot 12

Offer 24190 Specifications: - Drilling capacity 25 mm - Drilling spindle holder MK 3 - Drilling spindle stroke 140 mm - 8 drilling spindle speeds 100 - 2900 rpm - Min. / max. distance drilling spindle / table 110 / 405 mm -Lighting - Keyless chuck - Coolant device - Machine vise - Machine base - Drive 400 V / 0.75 kW - Space required: W 400 x H 1250 x D 600 mm - Weight approx. 200 kg

Defect needs to be restarted

Without grinding wheels

: ja : 094089 spindle speeds:: linka 2100 weight of the machine ca.: 600 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Folding machine KRAMER type A-toll. II 1000Fabr. No. 48 287 Year of construction 1990Useful length 1060 mmmax. Sheet thickness 3.75 mmStroke of the upper beam 180 mmAdjustability of the bending beam 60 mmBack gauge 480 mmDrive power of bending beam drive 4 kWAdrive power of upper beam drive 1.5 kWNet connection 400 volts, 50 Hz- manual and semi-automatic control- angle adjustment via angle selector- one-piece pointed rail 135- back gauge with hand crank adjustment and simple measurement scale-

Double-sided grinding and polishing bench MEYER type SMPMasch. No. 848 Year of construction 1963Shaft diameter 50 mmGrinding wheel holder 305 mmDisc spacing 1470 mmGrinding-polishing wheel diameter max. 800 mmWorking height 550 mmSpeed 710 / 800 / 950 rpm. Drive power 2x 3 kWNet connection 380 volts, 50 Hz.- two drive motors for each working side separately- star-delta switch for each drive motor separately- speed change by folding the drive belt- dust extraction flange 100 mm-

Bimak Mk3 Admission in drilling-spindle (morse): Mk3 Max drill capacity: 35 mm SPEEDS: 55 > 1000 rpm

Table, Drilling and Tapping Machine IXION Type BT 15 GLMasch. No. Year of construction approx. 1975Drilling capacity 15 mmSpindle holder Cone holder B 16Threading from M 2.5 to M10Throat depth 200 mmPine stroke 90 mmTable size 285 x 220 mmColumn diameter 75 mmSpindle speed 320 - 1600 rpm. 4 stagesMotor power 0.55 kWNet connection 380 volts, 50 Hz- Spindle speed via 4 V-belt steps- equipped with FAHRION GH 10 tapping chuck- with guide cartridge for the thread pitch, operation without

Inv. Num. : 8602 Type: W 9 Producer: TOS Created: 1975 Parameters: Work table length: 950 mm Work table width: 950 mm Maximum weight of the workpiece: 3000 kg Spindle diameter: 90 mm Maximum spindle speed: 1800 1/min X-axis travel: 1250 mm Y-axis travel: 900 mm Z-axis travel: 900 mm Machine weight: 11000 kg Equipment: DRO