draw bench used for sale

Drill press, drill press, stand drill, pillar drill -Table size: 430 x 615 mm -spindle taper: MK4 -Projection: 365 mm -Speeds: 63-800 rpm -Spindle stroke: 195 mm -Transmission -Feed: 0.1-0.4 mm/rev -Water cooling -Dimensions: 730/1040/H2640 mm -Weight: 1026 kg

Double bench grinder, bench grinder, column grinder, column grinder -Motor power: 3.3 kW -Speed: 1400 rpm -Grinding disks: Ø 400 x 50 mm -Operating voltage: 380 volts -Dimensions: 800/1120/H1540 mm -Weight: 434 kg

Teaching or test bench for hydraulic components with all accessories for sale.

Double bench grinder, bench grinder, column grinder, column grinder -Motor power: 1.35 kW -Speed: 1500 rpm -Max. Grinding wheels: Ø 300 x 40 mm -Operating voltage: 380 volts -Dimensions: 730/400/H1075 mm -Weight: 156 kg

Double bench grinder, bench grinder, column grinder, column grinder -Motor power: 1.1 kW -Speed: 1400 rpm -Grinding discs: Ø 300 x 40 mm -Operating voltage: 380 volts -Dimensions: 690/500/H1260 mm -Weight: 148 kg

Double bench grinder, bench grinder, column grinder, column grinder, Cut-off machine, polishing machine, polishing stand -Motor power: 0.45 kW -Speed: 2,800 rpm -Max. Grinding wheels: Ø 150 x 20 x Ø 32 mm -Operating voltage: 400 volts -Dimensions: 650/700/H1500 mm -Weight: 198 kg

faceplate diameter: 1400 mm turning diameter over slide rest: 1400 mm centre distance: 1500 mm turning length: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Drill press, drill press, stand drill, pillar drill -Table size: 500 mm -spindle taper: MK4 -Projection: 400 mm -Speeds: 38-750 rpm -Feed: 0.08-0.13 mm/rev -Columns: Ø 220 mm -Spindle stroke: 235 mm -Transmission: -Dimensions: 640/1020/H2730 mm -Weight: 965 kg

Brand: Sicar Type: Wood milling bench + extraction Model: SF70 Chassis number: BO400062003 Construction year: 2003 Weight: 0,28 tons Length mm: 2500 Width mm: 1000 Height mm: 1700 Transport size L x W x H: 2,5 x 1,0 x 1,7 Condition machine : Good

Tip distance approx.                                                    500 mm Tip height above bed 125 mm 8 speeds from 220 – 1800 rpm Space requirements, length x width 1.2 x 0.6 m Weight estimated approx.                                          400 kg

Specifications: Press force adjustable 10 – 100 kN Projection 210 mm Table size W x D approx. 500 x 400 mm Installation height with/without clamping plate 300 mm Stroke 100 mm

Key data: 435 mm, 1500 mm

Coolant equipment, a lot of accessories

Chassis number: 5084 Weight: 0,25 tons Power: 1,3 kw Length mm: 1000 Width mm: 1000 Height mm: 1800 Working height: 90 cm Transport size L x W x H: 1,0 x 1,0 x 1,8 Condition machine : Used Control type: Manually Electric. Connection: 16A 5P Photos/film available: Photos available Remaining: Originally it is a Quaranta

SPECIFICATIONS: Max. processing dimensions mm: 2400 x 1150 extendable and tiltable, suitable for processing doors Pneumatic operation

Vise, bench vise, locksmith vise, parallel vise, heavy-duty vise -Parallel vise: jaw width 150 x 30 mm -Wingspan: 190 mm -Quantity: 1 available -Dimensions: 485/210/H190 mm -Weight: 26 kg

Double bench grinder, double grinder, bench grinder, bench grinder -Manufacturer: Rema, double bench grinder type DS 1/200 -Grinding discs: max. Ø 200 x 32 mm -Motor power: 0.9kW -Speed: 2900 rpm -Operating voltage: 220/380 volts -Dimensions: 550/420/H1420 mm -Weight: approx. 72 kg

Double bench grinder, double grinder, bench grinder, bench grinder -Manufacturer: Rema, double bench grinder type DS 12/200 -Grinding discs: max. Ø 200 x 32 x 51 mm -Motor power: 0.9 kW -Speed: 2900 rpm -Operating voltage: 220/380 volts -Dimensions: 430/420/H1130 mm -Weight: 80 kg

Double bench grinder, double grinder, bench grinder, bench grinder -Manufacturer: Rema, double bench grinder type DS 12/200 -Grinding discs: max. Ø 200 x 32 x 51 mm -Motor power: 0.9 kW -Speed: 2900 rpm -Operating voltage: 220/380 volts -Dimensions: 550/410/H1070 mm -Weight: 72 kg

bore capacity in steel (diameter): 18 mm throat: 225 mm bore stroke: 110 mm table-size: 430x345 mm spindle turning speed - stepless: 135-4500 U/min Digital read-out Tapping attachment Cross table 530x255mm Misc accessories www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 1250 mm turning diameter over slide rest: 2040 mm turning length: mm total power requirement: 55 kW weight of the machine ca.: 12 t dimensions of the machine ca.: m Brand Zerbst Machine no D982 Type DP 1 - 2.040 Ø Digital readout Maximum turning diameter 2.040 mm ø Passage 98 mm ø 4-Jaw Chuck 1.250 mm ø Speed 4,5 - 224 RPM Separate chisel support Engine power 55 kW Excluding slot table Quick-change holder Machine weight 12.000 kg Dimensions: Head: 2.500 x 1.800 x 1.700 mm support: 2.200 x 1.800 x 2.000 mm Electrical panel: 2.200 x 600 x 2.200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gillardon Bench Drill GT 16 - MK2 recording - Stepless speed Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

OPTIdrill Bench Drill DQ 18 Spindle Holder MK 2 Motor 550 W, 230 V Drilling capacity up to 16 mm Keyless chuck Drilling table 200 x 200 mm, swivel and tilt 5 speeds 600 - 2400 rpm Weight approx. 30 kg 0041 62 922 68 28

faceplate diameter: 1000 mm turning diameter over slide rest: mm turning length: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Standard equipment Main switch Tapping device Control panel with OLED display Robust, high-quality drill head hood with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drilling depth stop Stepless speed control via central rotary knob EMERGENCY STOP push button Thermal overload protection Spindle stop Drilling protection with electr. Hedge Connection cable with CEE plug 3-year warranty for single-shift operation Specifications Continuous/normal drilling capacity (mm) 23/25 (in E335/ST60) Tapping capacity (pitch dependent) M16x1 Spindle MK III Drilling depth (mm) 115 Projection (mm) 260 Column diameter (mm) 110 Usable work surface (W x L) (mm) 420 x 340 T-slot size (arm), spacing (mm), dimension width (mm)Quantity 2, 125, 13/26 Speed display: digital Drilling depth display: digital Drilling depth stop: quickly adjustable stop ring Fee ...

bore capacity in steel (diameter): 20 mm throat: 276 mm bore stroke: 110 mm table-size: 315 x 335 mm spindle turning speed - stepless: 50-6300 U/min Digital read-out Tapping attachment Cross table 530x255mm Misc accessories www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 13 mm throat: 235 mm bore stroke: 60 mm spindle taper: B 16 spindle turning speed - stepless: 100-3000 U/min table surface area: 290x270 mm column diameter: Ø 60 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bench vice, metalworker & vice, parallel vice -Jaw width: 135 mm -Wingspan: 215 mm -Number: 3x vices available -Price: per piece -Dimensions: 440/200/H490 mm -Weight: 26 kg

Test bench for power up to 2.2 KW Speed control Speed Switching Handheld remote control with cable for speed and rotation direction switching Data for converters see nameplate Connection cable CEE 32A Output CEE 16A Space requirement W - 600 x D - 650 x H - 1,750 mm rollable Weight approx. 85 kg

Double bench grinder WMW Type ST300 Year: 1970 Disc drm.: 300 mm Power: 1.1 kW Dimensions: 750 x 420 x 1200 mm

- Version for 3 lt bottle (double magnum) - for champagne capsule - works by pneumatic operation with 2 passages: -- First passage: pleating. -- Second passage: smoothing. Production:  100 bottles/hour Workable materials:  Bottles 3 Lt - Capsules with max. length 150 mm Dimensions:  90 x 55 x 30 cm (length x width x height) Weight: 25 Kg

Double bench grinder SOLID DS300STA Disc diameter Ø max 300 mm Disc width max 40 mm 1.5 kW 1500 rpm 220 / 380 V Dimensions: 700 x 530 x 1100 mm

Langbein double-saddle grinding bench with left/right feed for woodworking. Technical data: Clamping length per side: approx. 450 mm Spindle diameter: 45/35 mm Condition: Gebraucht Location: Tauberbischofsheim, Germany

Bench drill WMW BT10/1 Drilling capacity: 10 mm projection: 210 mm Distance table to drill chuck: 210 - 400 mm table: 350 x 250 mm spindle speed: 250, 355, 710, 1000, 1400, 2000, 2500 rpm spindle stroke: 100 mm with footswitch for right and counterclockwise rotation ! Engine Power: 0.7 kW 380 V used, tested ! Dimensions: 620 x 800 x 1950 mm

The robust Optimum B 23 Pro bench drill for drilling into wood, metal or other materials, featuring a quick-action chuck. Technical data: Spindle mount: MK 2 Rated power: 750 W // 400 V // 50 Hz Condition: Gebraucht Location: Tauberbischofsheim, Germany

Lathe PPL 200-225 - Turning diameter over bed: 400-450 mm - Turning diameter over slide: 235-285 mm - Offset with bridge: turning diameter 600-650 mm - Face plate diameter: 350 mm - Bed width: 320 mm - Engine power: 5.5 hp - Tool carriage: 150 mm stroke Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Viewing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

Bench drill WMW BT2 projection: 210 mm Distance table to drill chuck: 110 - 260 mm Table: 340 x 280 mm spindle speed: 355, 710, 1400, 2800 rpm spindle stroke: 80 mm spindle mount: MK2 with footswitch for right and counterclockwise rotation ! engine power: 1.1 kW 380 V On steel table used, tested ! Very good condition ! Dimensions: 530 x 650 x 1850 mm

met manuele kruistafel

WMW BK 50 AI Admission in drilling-spindle (morse): Mk5 Max drill capacity: 50 mm Table dimensions: 490 x 530 mm SPEEDS: 45 > 1000 rpm Max drilling depth: 280 mm Motorpower: 7 kW Length: 1200 mm Depth : 770 mm Height: 2700 mm Weight: 1,7 ton

Auction-ID: A1-50700-9

Double bench grinder VEM SEWStNa40SENa350 Disc diameter Ø 350 / 350 mm Disc width 63 / 40 mm with cooling device 1,1,1,000 5 kW 3000 rpm 220 / 380 V Dimensions: 1050 x 950 x 1300 mm

Standard equipment: Tapping device Control panel with OLED display Robust, high-quality drill head hood with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drilling depth stop Stepless speed control via central rotary knob EMERGENCY STOP push button Thermal overload protection Spindle stop Drilling protection with electr. Hedge Connection cable with Schuko plug 3-year warranty for single-shift operation Continuous/normal drilling capacity (mm) 6/8 (in E335/ST60) Tapping capacity (pitch dependent) M5 Spindle B12 Drilling depth (mm) 60 Projection (mm) 220 Column diameter (mm) 70 Usable work surface (W x L) (mm) 300 x 250 T-slot size (arm), spacing (mm), dimension width (mm) Cross grooves, number 2, 14/26 Drill head height adjustment by hand Feed (mm/revolution) by hand Drilling depth stop ring (positive fit) Drilling depth indicator digi ...

Auction-ID: A1-50700-12

Bench grinder attachment IMEP 0.55 kW speed: 2775 rpm voltage: 220/ 380 V degree of protection: IP 44 approx. 5 m connection cable shaft: Ø 27 / 42 mm used, tested ! Dimensions: 465 x 200 x 345 mm

Auction-ID: A1-50700-27

Auction-ID: A1-50476-314

Double bench grinder, brush deburring machine, deburring machine VEM, ELBTALWERK SEWStN40SEN350 disc diameter Ø 350 / 350 mm Disc width 63 / 40 mm with a wire brush ! 1.5 kW 1500 rpm 220 / 380 V used, tested ! Dimensions: 1400 x 800 x 1250 mm

Key data: 13 mm

Made in Germany Drill chuck: B 16 Speed: 480 - 4,000 rpm

Double bench grinder GISAG SE 2x400/1 TGL 24500 Disc diameter: Ø max 400 mm 4 kW 380 V Protective cover is missing !' used, tested !' Dimensions: 1100 x 700 x 1200 mm

bore capacity in steel (diameter): 23 mm throat: 310 mm bore stroke: 150 mm turning speeds: 90 - 2000 U/min : 420 x 360 mm total power requirement: kW / Volt weight of the machine ca.: 650 Kg dimensions: 1,2 x 0,8 x 2,4 mm Bench drill - Left/right rotation - Advance - Base frame The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Auction-ID: A1-50476-326