draw bench used for sale

Description: Contents of different drills Approx. Onsite Dimension. (l x w x h): 700 x 550 x 400 mm, weight approx.: 60 kg

Description: Contents files, screws, nuts Different versions Approx. Onsite Dimension. (l x w x h): 730 x 700 x 1,000 mm, weight approx.: 70 kg

Description: Contents open-end wrench, screws, clamping elements Approx. Onsite Dimension. (l x w x h): 700 x 700 x 1,000 mm, weight approx.: 100 kg

Description: Contents ,micrometers, ,callipers, files, ,screws Approx. Onsite Dimension. (l x w x h): 730 x 730 x 1,000 mm, weight approx.: 100 kg

Description: Contents Calipers, micrometers, ,indexable inserts, taps, turning steels, nuts, screws, twist drills Approx. Onsite Dimension. (l x w x h): 730 x 600 x 700 mm, weight approx.: 100 kg

Approx. Onsite Dimension. (l x w x h): 800 x 700 x 1,200 mm, weight approx.: 50 kg

Description: With a stock of callipers, micrometers, compasses, twist drills, turning tools, indexable inserts, centers, collets, threaded rods and three steady rests in different sizes. Approx. Onsite Dimension. (l x w x h): 800 x 800 x 1,200 mm, weight approx.: 250 kg

Machine Type: Drawing Machine/Stretching Machine Manufacturer: JOSEF BÖHM Condition: good Offer Type: Used Machine Specifications: Working size: max. working length 1500 mm Drive type: by hand via worm gear drive The machine is in good condition and ready for immediate use and can be viewed and demonstrated by us. We would be pleased if you are interested in our offer. Errors, modifications and prior sale excepted.

Film width 420 mm , Trigger 250 mm , Vario tool, MAP Machine completely overhauled and immediately available

Drawer Systainer FESTOOL T-Loc, 3 drawers, filled with tools

Drawer Systainer FESTOOL T-Loc, 3 drawers, filled with tools, closure missing

inlet wire diameter up to 9 mm finished wire diameter 10% reduction number of drafts 1 diameter of capstan 500 mm speed -meters/sek 5

Multivac R 140 , built in 2008 , film width 420 mm , take-off 300 mm , variator tool, formats 1.1 + 2.1 + 2.2 , built-in vacuum pump, photocell with pressure mark control. well-maintained condition. Length 3.6 >meters

Description: Composed of: N°2 drawer units with two small drawers and one large drawer, each with dimensions 700 x 550 X 700 mm , With contents of various types. Desk (visible in photo) with dimensions 1600 x 800 x 830 mm Contents placed above the desk are not included. Approx. Onsite Dimension. (l x w x h): 1,100 x 700 x 700 mm, weight approx.: 60 kg

Dental drawer unit ASTRA approx. 180wx90hx50t cm, recessed washbasin, 2 drawer blocks, 2 pull-outs for appliances, plus additional workstation ASTRA approx. 150wx90hx50t cm recessed washbasin, 1 drawer cabinet, all without contents

Description: Underframe with 4 drawers Without contents Top unit with pull-out drawer 1470 x 750 mm weight approx.: 80 kg, Approx. Onsite Dimension. (l x w x h): 1,600 x 800 x 1,600 mm

Description: Consisting of: Chassis with drawbar Support castors 2 pieces Heavy-duty castor with turntable, one missing axle Approx. Onsite Dimension. (l x w x h): 800 x 600 x 300 mm, weight approx.: 60 kg

Description: Contents consisting of dies, milling cutters, carbide milling cutters, indexable inserts (some in original packaging), collets, open-end wrench Approx. Onsite Dimension. (l x w x h): 730 x 700 x 1,000 mm, weight approx.: 250 kg

Description: Content consisting of a batch of milling cutters, collets, open-end wrenches, pliers, taps, twist drills, spindle holders, clamping elements Approx. Onsite Dimension. (l x w x h): 730 x 700 x 1,000 mm, weight approx.: 250 kg

Description: Contents consisting of guide bolts, plugs, sealing rings, screw fittings, hose nozzles, pneumatic hydraulic surface, clamps and screw clamps, roller guides and measuring tapes Approx. Onsite Dimension. (l x w x h): 730 x 700 x 1,000 mm, weight approx.: 150 kg

Description: Contents consisting of fitting screws, ball bearings, adjusting rings, knobs, star grips, caps, Misumi pins, bushes, test pins, dial gauges, pressure spindle, tensioner fork, tensioner Approx. Onsite Dimension. (l x w x h): 730 x 700 x 1,000 mm, weight approx.: 150 kg

Description: Contents consisting of 2 digital calipers, indexable inserts, scrapers, soldering iron, threaded blind rivets, riveting pliers, circular saw blades, planing knives, cut-off wheels, grinding stones, impact numbers, air grinder, electric recorder Approx. Onsite Dimension. (l x w x h): 730 x 700 x 1,000 mm, weight approx.: 150 kg

Description: Contents consisting of indexable inserts, countersinks, milling cutters, twist drills, indexable insert milling cutters, various calipers, gauges, hammers, files and various turning tools Approx. Onsite Dimension. (l x w x h): 600 x 600 x 1,000 mm, weight approx.: 150 kg

Illig SB 53- C from a workshop for the disabled with few operating hours Serinenr. 233-2484 Siemens Simatic control system Dimensions in mm approx. 2000x1600x1000 for transport reasons, the cylinder was removed (see photo) Also for sale: Illig SK 74-C from 2006

Illig SK 74-C from a workshop for the disabled Year of construction 2006 Serial No.426-0172 JM80Q2 +2 pallets with approx. 38 rolls of film Dimensions in mm approx. 2200x1600x1600

Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, drawer cabinet -Tool cabinet. Drawer cabinet, sturdy design -7 drawers: division/height see photos, -Number: 1x cabinet available -Dimensions: W x D x H 500/580/H 830 mm -Weight: 52 kg

Description: Drawer cabinet with 7 drawers Drawer dimensions 600 x 435mm Drawer height, Drawer 1 - 6, 81mm Drawer 7, 173mm Number of drawers 8 pcs. Dimensions L-W-H 710 x 510 x 900 mm Own weight 67 kg Approx. Onsite Dimension. (l x w x h): 710 x 510 x 900 mm, weight approx.: 60 kg

Description: Stable tool cabinet with 6 drawers, lockable. 2x75, 2x100, 1x150 and 1x200mm Useful dimensions inside : 770x450 mm. Maximum load per drawer 100 kg ! Furnishings: 32x boxes 75 x75 mm. 16x boxes 75 x 150 mm. 8x boxes 150 x 150 mm. 12x dividers long 32x dividers short 1x stacking sheet Number of drawers 6 pcs. Dimension 880x580x800mm Own weight 126 kg Load capacity 100 kg per drawer Approx. Onsite Dimension. (l x w x h): 880 x 580 x 800 mm, weight approx.: 126 kg

Description: Stable tool cabinet with 8 drawers, lockable. 2x75, 4x100, 1x150 and 1x200mm Useful dimensions inside : 770x450 mm. Maximum load per drawer 100 kg ! Furnishings: 32x boxes 75 x75 mm. 16x boxes 75 x 150 mm. 8x boxes 150 x 150 mm. 12x dividers long 32x dividers short 1x stacking sheet Number of drawers 8 pcs. Dimensions L-W-H 880 x 580 x 1000 mm Own weight 156 kg Load capacity 100 kg per drawer Approx. Onsite Dimension. (l x w x h): 880 x 580 x 1,000 mm, weight approx.: 156 kg

Description: Drawer cabinet with 8 drawers Drawer dimensions 600 x 435mm Drawer height, Drawer 1 - 8, 81mm Number of drawers 8 pcs. Dimensions L-W-H 710 x 510 x 900 mm Own weight 67 kg Approx. Onsite Dimension. (l x w x h): 710 x 510 x 900 mm, weight approx.: 67 kg

Description: Sturdy tool cabinet with 8 drawers, lockable. 2 x 75, 4 x 100, 1 x 150 and 1 x 200mm Useful dimensions inside: 770x450 mm. Maximum load per drawer 100Kg ! Number of drawers 8 pcs Dimensions L-B-H 880 x 580 x 1000 mm Weight 156 kg Load capacity 100Kg per drawer Approx. Onsite Dimension. (l x w x h): 880 x 580 x 1,000 mm, weight approx.: 156 kg

Description: Stable tool cabinet with 8 drawers, lockable. 2 x 75, 4 x 100, 1 x 150 and 1 x 200mm Viewing size inside: 620x450 mm. Maximum load per drawer 100Kg ! Number of drawers 8 St. Dimensions L B H 720 x 580 x 1000 mm Net weight 128 kg Carrying capacity 100kg per load Approx. Onsite Dimension. (l x w x h): 720 x 580 x 1,000 mm, weight approx.: 128 kg

Sheet metal drawer cabinet ASTRA approx. 50wx45tx80h cm, 4 drawers, without contents

Drawer rail, telescopic rail, drawer extension, drawer rails, drawer extension, Telescopic rails, pull-out rails, heavy-duty pull-out, ball bearing guide full extension, roller slide guide -Manufacturer: Blum, TANDEM plus BLUMOTION full extension set LR unused -Article No.: 560H250 -Nominal length: 250 mm -Load capacity: 30 kg -Quantity: 15x set available -Price: per set -Transport dimensions: 250/60/H60 mm -Weight: 1.2 kg/set

Description: 8 pull-outs Contents screwdrivers, hammers, Allen keys, open-end wrenches, inserts, screws Approx. Onsite Dimension. (l x w x h): 720 x 750 x 1,200 mm, weight approx.: 120 kg

Description: 9 lockable pull-outs Contents: machine screws with different threads, washers, nuts, hose connections, screwdriver, chisel, hammer, open-end wrench Approx. Onsite Dimension. (l x w x h): 720 x 750 x 1,150 mm, weight approx.: 120 kg

Description: 8 pull-outs Contents: wood screws, screw clamps, DEWALT drill, FESTO orbital sander Without cover plate Approx. Onsite Dimension. (l x w x h): 720 x 750 x 1,150 mm, weight approx.: 80 kg

Description: Lockable 7 pull-outs Contents ,different cutter heads, tools for moulder, profile knives Approx. Onsite Dimension. (l x w x h): 720 x 750 x 1,200 mm, weight approx.: 200 kg

Description: 4 pull-outs Contents: Threaded sleeves, 1 FESTO orbital sander, 2 drills, 1 ELU router, 1 FESTOOL RS 300 EQ orbital sander without wooden cover for drawer cabinet Approx. Onsite Dimension. (l x w x h): 720 x 750 x 1,200 mm, weight approx.: 100 kg

Description: 8 pull-outs Contents: router bits, sandpaper suitable in part for orbital sanders, dowels, stops for routers, sandpaper for random orbital sanders without wooden cover for drawer cabinet Approx. Onsite Dimension. (l x w x h): 720 x 750 x 1,200 mm, weight approx.: 100 kg

Description: consisting of various ratchet boxes, ratchets, spanners, open-end spanners, screwdrivers and pliers Approx. Onsite Dimension. (l x w x h): 700 x 470 x 400 mm, weight approx.: 100 kg

Description: consisting of clamping sleeves, collets in various sizes and designs, parrallels and a device for storing tool holders Please note: the machine vices on the workshop drawer cabinet are not included in the scope of delivery! Approx. Onsite Dimension. (l x w x h): 750 x 730 x 1,300 mm, weight approx.: 200 kg

Description: consisting of clamping jaws, one height gauge, various steel holders, one SMW three-jaw chuck (diameter: 160 mm), two further RÖHM three-jaw chucks (diameter: 200 mm and 200 mm) and one dividing head with a three-jaw chuck (diameter: 130 mm) Approx. Onsite Dimension. (l x w x h): 800 x 650 x 1,400 mm, weight approx.: 150 kg

Description: consisting of tips, drill chucks, connections, twist drills, collets, approx. 90 pieces VDI 30 tool holders, partly equipped with cutting tools Approx. Onsite Dimension. (l x w x h): 750 x 730 x 1,100 mm, weight approx.: 300 kg

Description: consisting of collets, clamping jaws from the manufacturer SCHUNK Approx. Onsite Dimension. (l x w x h): 760 x 570 x 900 mm, weight approx.: 150 kg

Description: consisting of collets Approx. Onsite Dimension. (l x w x h): 760 x 570 x 900 mm, weight approx.: 150 kg

Description: consisting of turning steels, indexable inserts, hand tools, allen keys, screws, various clamping jaws, various carbide cutters, milling cutters, a larger batch of collets, manufacturer FAHRION, one SCHUNK machining element Attention: without Multifix steel holders on the cabinet Approx. Onsite Dimension. (l x w x h): 800 x 750 x 1,200 mm, weight approx.: 200 kg

Description: tools and accessories included Approx. Onsite Dimension. (l x w x h): 1,300 x 1,000 x 1,300 mm, weight approx.: 400 kg

pressure:40 t distance between columns:600 mm ram power:40 Mp max. ram stroke:160 mm dayligth:360 mm table-size:560x400 mm T-slots:18 mm ram hole:40 mm table height:950 mm Total height:2540 mm length in width:1440 mm power capacity:5,5 kW centering bore - table plate:100 mm depth:1100 mm column depth:950 mm oil box capacity:250 l total power requirement:ant kW 100 % before loading warranty: none used double column drawing press, make FRITZ MUELLER, type S 40.11.1, year of production 1978

pressure:200 t distance between columns:2100 mm stroke:550 mm Distance table/ram, stroke up:1800 mm table surface area:2000 x 2800 mm table height over floor:760 mm ram surface:2000 x 2000 mm Side window:2000 mm feed down:400 mm/s power requirement:51,0 kW weight:33,0 t dimensions (WxDxH):3,25 x 3,5 x 5,4 m Height above floor:5,4 m foundation pit:not necessary