dr hochstrate used for sale

Kaeltetrockner Kaeser TG 301 FE 16 bar, 30.8 m3 rpm, caelte agent R404a.

Refrigerant dryer Kaeser TG 301 FE 16 bar, 30,8 m3/min, Refrigerant R 404a.

Color: grey 400V 50 H Capacity: 8.5 kW, 32A Control voltage: 24V, 4-6 bar Temperature: 130 ° C, 76 dB

Prismatic column drill. Drilling capacity: 30mm. Table: 600x600mm. Speeds: 8. (75-2100) Motor power: 1,65Kw. CE. Year: 2005

Many thanks for your interest on our Drop Rollers for hard candy, please find follow our offer: Type : Candy roller/ Drop Roller for Hard Candy, hand driven roller size. : approx 58mm x 177 mm Packing dimensions : approx. 630 x 580 x 450 mm (lxwxh) (wooden box suitable for export) Net Weight : approx. 65 kg. Gross weight : approx. 95 kg. Different: with one set brass drop roll round/egg shape without structure, round 300 other types possible. For every roll you decide for size, or you can give us your own form, Also available machine with working table, electrical engine and gear box. We offer this machine in as-is where it is condition delivery time: According to the arrangement ex warehouse Hess. Lichtenau

Many thanks for your interest on our Drop Rollers for hard candy, please find follow our offer: Type : Drop Roller for Hard Candy with electr. Engine roller size. : approx 58mm x 177 mm table size : approx. 750mm x 620mm x 750mm (lxwxh) Packing dimensions : approx. 30” x 30” x 25” (wooden box suitable for export) Net Weight : approx. 200 kg. Gross weight : approx. 250 kg. Different: with one set brass drop roll round/egg shape without structure, round 300 other types possible. For every roll you decide for size, or you can give us your own form, Machine with working table, electrical engine and gear box. Also available, machine hand driven, without electrical engine We offer this machine in as-is where it is condition delivery time: appr. 8-12 Weeks after payment in our warehouse

PIVOT AND DRILL FITTINGS Attacks left and right 2200 ´ mm Motor 400 V

Vibration machine for drying and sieving of sand. The machine consists of a welded construction mounted on conveyor elements, with 2 Electric Vibrators as drive. An electric heater with built-in blower is located at the end of the conveyor belt. Below the conveyor trough a sieve box is mounted in the area of the sand outlet. The dynamic forces that are emitted from the machine to the ground only about 100 N amount due the shock mount on the spring elements. The amplitude and therefore the flow rate can be set by adjusting the unbalances on the motors. The machine is due to the simple design nearly stör - and maintenance-free. The static frequency converter has a range of 10 to 32 Hz Length: 3.5 m Width: 1.2 m Height: 1.4 m Weight: 220kg

Coolers, axial, garner GFH082B / 2 x 6 Manufacturer: Güntner GFH082B / 2 x 6 medium: water glycol 70 / 30% Medium temperature: 90º occurs C.Austritt 70 ºc. Cooling capacity: 2500kW air temperature: 30ºc. Fans: 12 pieces, 2, 2 kW, 400V, 50 Hz, 3 wire Connection: DN 100, exit is 2 x 2 x DN 100 Dimensions: Lxwxh = 12. 000x2300x1450mm Weight: 2550kg Sound pressure level: 58 DB (a) distance of 10 m, year built: 2000 Condition: Good, tightness and fans Jenbacher, dry tested cooler, dry air cooler, not cooler, drycooler, glycol coolant

-Turret fence -Thread cutter table 600 x 320 mm Speed 40-3600 RPM Spindle diameter 65 mm Recording Aciera quick-change system Spindle stroke 120 mm Dimension WxDxH 90 x 130 x 185 cm Weight 800 kg

Hardware drill Ruchser RU EBL2, 5-S Masch. No. 00664-2-96 Weight approx. 700 kg Built in 1996 L x W x H: 350 x 80 x 130 cm The machine is in good condition, ready to use. Spare parts/service MATEC CH-4952 Eriswil/DE-79618 Rheinfelden Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

-Turret fence -Thread cutter table 600 x 320 mm Speed 40-3600 RPM Spindle diameter 65 mm Recording Aciera quick-change system Spindle stroke 120 mm Dimension WxDxH 90 x 130 x 185 cm Weight 800 kg

currently setup for thermoformed shells for pizza shell outer size 280 mm, inlay inside 230 mm, depth 20 mm shells useful also for flame cakes, crepes and similar products with gassing dimensions abt. 4.000 x 1.000 x 1900 mm overhauled 2012

Slot boring machine Scheer L x W x H: 70 x 60 x 140 cm Weight approx. 400 kg Built in 1975 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Drum chipper MATEC economy THS 600-2/6 -Catchment level / nominal height 200 mm, hacker feeder height Max 300 -Catchment width 600 mm -Rotor diameter 600 mm -Number of rotor blade 2 -Number counter Blade 2 -Screen of change of perforation 50/50 -Steak size nominal TMP quality 25/25 mm -Feed rollers top 2 -Feed rollers down 2 -Geared motor indent above 2.2 kW -Geared motor indent below 2.2 kW -Weight approx. 2000 kg -Hacker main motor 45 kW/3 x 380 V -Feeding speed nominal approx. 24 m / min. New machine, ready for use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

for 60-80 kg batches, depending on the product Copper boilers Diameter 950 mm, depth approx. 550 mm Opening diameter 600 mm, electrically tiltable, already checked, fully in order. Dimensions: 1270 x 1100 x 1600 mm high Weight approx.300 kg

The deep hole drilling machine have 6 spindles and is in very good condition, LIKE NEW! This can be like to inspect under pressure. On request we can send you more pictures. Number drill spindle 6 ELB and BTA drilling Min. drilling diameter 3 mm Max. drilling diameter 20 mm Max. drilling depth 1000 mm We see ourselves as a competent partner for downhole drilling, turning, milling and welding in paid labor. We will gladly make you an offer!

COGENTECH COLUMN DRILLING MACHINE TYPE VD40C -MK4 -Electromagnetic automatic voeding -50/1450 t/m -Draait right en linksom -Tapfunctie -Uitlading 180 mm -Table of 560 x 560 mm -Tandwielaangedreven -Koeling -Beschermkap -Noodstop -Verlichting -400V PRICE IS plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

Precise, smooth-rolling standard drill, high accuracy and quality. drilling table adjustable rack and the swiveling column. Full motor protection, star-shaped knob. Mains connection 230 V. Dauerbohrleistung in St 60: 15 mm Standard ALB ear power: 18 mm Infinitely variable spindle speeds: 200 - 4,000 min-1 Spindle: MK 2 Drilling depth: 80 mm Projection: 180 mm Distance from spindle/table top: up to 380 mm Tabletop: 250 x 220 mm Column diameter: 65 mm Total height: 910 mm Weight: 80 kg Three-phase motor frequency controlled: 1,1 kW Facilities: -Turn switch clockwise / counterclockwise to thread cutting - full motor protection -Star handle In stock, available now

Driven tool for Mazak Integrex Item description see nameplate. Good condition fully functional can be visited on site and tried out. Shipping abroad. Visit: Basically I would like to point out that the article may be viewed and tested under power to exclude misunderstandings, like before you buy. Please ask questions before you purchase to avoid ambiguity. For general questions or an appointment for a visit I am at the below telephone number, available. Errors in the description and intermediate sale is reserved. Shipping with freight forwarding.

Driven tool for Mazak Integrex Item description see nameplate. Good condition fully functional can be visited on site and tried out. Shipping abroad. Visit: Basically I would like to point out that the article may be viewed and tested under power to exclude misunderstandings, like before you buy. Please ask questions before you purchase to avoid ambiguity. For general questions or an appointment for a visit I am at the below telephone number, available. Errors in the description and intermediate sale is reserved. Shipping with freight forwarding.

Driven tool for Mazak Integrex Item description see nameplate. Good condition fully functional can be visited on site and tried out. Shipping abroad. Visit: Basically I would like to point out that the article may be viewed and tested under power to exclude misunderstandings, like before you buy. Please ask questions before you purchase to avoid ambiguity. For general questions or an appointment for a visit I am at the below telephone number, available. Errors in the description and intermediate sale is reserved. Shipping with freight forwarding.

Driven tool for Mazak Integrex Item description see nameplate. Good condition fully functional can be visited on site and tried out. Shipping abroad. Visit: Basically I would like to point out that the article may be viewed and tested under power to exclude misunderstandings, like before you buy. Please ask questions before you purchase to avoid ambiguity. For general questions or an appointment for a visit I am at the below telephone number, available. Errors in the description and intermediate sale is reserved. Shipping with freight forwarding.

Line boring machine, used gear spindle drilling machine, used Fabr. WEBO Typ: S 3 e Baujahr: 1980 Drilling capacity in steel (diameter) 3 …. 13 mm / MK 2 Bohrhub: 90 mm Throat depth: 90 mm depth: 200 mm Spindle speeds of 750 …/8500 RPM Spindle number: 4 workpiece - mounting height: 280 mm max table size 320 x 1200 mm Table vertical adjustment: 280 mm Machine weight approx. 800 kg

Wood drying chamber Bollmann L x W x H outside: 11.0 x 3,0 x 2,7 m Stack dimensions B x H: 1.5 x 2.0 m Weight approx. 2000 kg Built in 1982 The wood drying chamber is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Technical data: Drive motors/ motors Number: 6 pieces available Manufacturer: Spörk Condition: good (used) Power: see type plate/ motor data <b>Tailor-made solutions for your intralogistics</b> We are your competent contact for roller conveyors, belt conveyors, slanted rollers or telescopic phones for loading and unloading your goods! We are happy to prepare your individual offer or advise you on the conception or assembly questions. Simply let us know your needs and local conditions. Take advantage of our many years of experience and our excellent network of experts. We have already successfully implemented projects for companies in a wide range of industries, such as logistics, the pharmaceutical industry, the craft sector and the electronics industry. Together, we will work out ways to optimize your flow and material flow cost-effectively and susta ...

HIGH PRODUCTION BABCOCK ROLLERS DRYER

High quality - Low price! Radial drill MAS VR5A Arm 1600mm Max dia in steel 50mm Max dia in cast iron 60mm Max threading in steel M30 Max threading in cast iron M42 MT 4 Spindelmotor 4 kW - 28 - 2500 RPM Distance table-spindle nose 1600 mm Clamiping area 1800 x 1000 Weight 3,7 Ton

Deep hole boring machine - heavy duty deep hole boring machine Kramatorsk (Russia) KJ 1910 Year of manufacture 1986 Maximum boring diameter, mm 600 Maximum use of lenght mm 10000 (10 meters) Max 25 ton Machine in our warehouse in Northern Italy Center height over the bed, mm 670 Maximum work piece external diameter, mm 1300 Work piece length range on one-sided machining, mm 1000.. 10000 Work piece diameter range, mm: -in chuck of faceplate 200th.. 1100 -in open rest 400... 900 -in closed rest 200... 630 -in round rest 250... 550 Maximum work piece weight 25000 kg Range, 2 200 rpm spindle speeds Spindle diameter hole mm 700, Main motor power, kW 85 Counter rotation motor is 95kW Machine overall dimensions, mm 25550 x 3000 x 2290 Machine weight, kg 83000 Mimu machine tools (Italy) machine tools

Maho UIniversaltisch

Rotary vane vacuum & compressor - running dry Manufacturer: Becker Type: DVT 3.140 and DVT 3.100 Motor: 400V DS Suction power: 100 - 140m3/h Compression pressure/ vacuum: optional +-0.5bar / +-1.5 barStatus: Preliminary

Rotary vane vacuum compressor - running dry Manufacturer: Becker Type: KVT 3,100 Motor: 400V Status: Generalueberholt and repainted Performance: 12 months; ready for use

; ready for operation

Rotary vane vacuum pump running Manufacturer: Becker Type: KVT 3.140 Motor: 400V/50Hz suction power: 140m3/h end pressure: 100mbar (abs.) corresponds 90% vacuum Status: Generalueberholt Zubehoer: Vacuum filter mounted; User manual Further details or technical advice via request; ready for use

Working width: 4800 mm N. of heated sections: 22 N of decks: 6 complete with automatic loading and un loding systems

Rotary vane vacuum pump dry Manufacturer: Becker Type: VT 4.40 Condition: Generalueberholt Spannung 400V DS Suction valves. 40m3/h Performance: 12 months Delivery time: from stock Other pumps on request !; ready for use

Rotary vane vacuum compressor - running dry Manufacturer: Becker Type: DVT 3.60 & DVT 3.80 Motor: 400V Status: Generalueberholt and Neu-painted Gewaehrleistung: 12 months; ready for use

; ready for use

Injection pump drive in Exchange for Volvo D30

Injection pump drive for Volvo D30 on an exchange basis

Multivac R 530, rigid films + soft film, film width 420 mm, trigger 560 mm 2.3, MAP fumigation, long loading, jumbo roll holder for film, double film holder for top film, printing mark control, 3 x cross cutting for soft slide, 3 x hard foil stamping

Manufacturer: Busch Type: Mink MM 1142 BV Motor: DS 400V Suction power: 140 m3/h Final pressure: approx. 60 mbar (abs.) Zubehoer: suction filter; Operating instructions delivery time: short-term; ready for use

; ready for operation

Claw vacuum pump dry Manufacturer: Busch Type: Mink MM 1322 AV Motor: DS 400V Suction power: 300 m3/h End pressure: approx. 150 mbar (abs.) Performance: 12 months Condition: New ashoer: suction filter; Operating instructions Delivery time: short-term; ready for use

- trockenlaufend, luftgekühlt - Saugleistung 129 m3/h - Leistung 4,0 kW  - Spannung 50 Hz, 400 V - Ansaugfilter integriert - Geräuschwerte 76 dB(A) - Abmessungen L=873, B=470, H=336 mm - Gewicht 111 kg

Claw vacuum pump dry manufacturer: Busch Type: Mink MM 1252 AV Motor: DS 400V Suction power: 250/300 m3/h final pressure: approx. 100 mbar (abs.) Zubehoer: suction filter; Operating instructions Delivery time: short-term; ready for use

Drawing blades serve as tools for the fine removal of chips, for removing old paint layers and for cleaning contaminated surfaces. Pull blades are usually not functional when purchased, but only a piece of steel sheet. In order to function, a fine ridge must first be sanded. We offer fully functional drawing blades of 0.4 mm and 0.5 mm Swedish steel for new purchases. If necessary, we will gladly grind your "used" or "new" drawing blades and let them come back to you functionally. Contact us. We would be happy to provide you with a new range of re-energised blades - ground or unground and/or a grinding offer. We would be happy to provide you with further information regarding drawing blades.

Stationary drying plant for cereals, grass, leaves, potatoes, sugar beet and similar products. Dimensions of the drum Drum length approx. 10 m Drum outside approx. 2.50 m Total weight drum approx. 21520 kg The facility is still in place and can be visited on site by appointment. (Saxony) In addition, but not included in the price, the following components can be offered: Product feed (conveyor belt) Suction and dust removal Cyclone separators The drum was lined in 2010 with new sheets (high-temperature resistant stainless steel). After that, the plant was only operated for one season. Of course, disassembly, loading and transport costs are not included in the purchase price.

The belt dryer / continuous dryer is used for the continuous drying of coatings on smooth surfaces such as glass. Manufacturer TESOMA GmbH Type LYNX Version 16-E-HHH-X Built in 2008 Bandwidth 1600 mm Flow height 400 mm Inlet length 500 mm 3 hot air segments per 2000 mm Outlet length 500 mm drying temperature 100 °C solvent throughput 7.00 kg/h at minimum exhaust air volume flow 1500 m3/h Tape speed 0.5 - 5 m/min Connected power 89 kW Heating capacity 79 kW total motor power 10 kW (fan and drive) Total dimensions Width: approx. 2400 mm Length: approx. 8800 mm Height: approx. 1800 mm For a visit, please make an appointment.