dr hochstrate used for sale

Drilling and milling machine with - Variable spindle speed - Digital depth display - Left/right switch - Cross support - Swivelling spindle head - Feeds via hand crank - Tool case with contents Drilling capacity in steel 13 mm Projection 170 mm Drilling stroke 50 mm Capacity finger milling machine 13 mm Spindle Holder MK 2 Spindle speeds: 50 - 3000 rpm Table adjustment transverse 220 mm Table adjustment longitudinal 160 mm Table clamping area 500 x 140 mm Connection voltage 230 V Total power requirement 0.5 kW Machine weight approx. 0.06 t Space requirement approx. 0.6 x 0.45 x 0.76 m Attention: Machine is without digital display! Condition: never used / new (5)

Equipment: Drill chuck with ISO-30 mount Digital depth display Left/right switch. Emergency stop Swivelling drill head Spindle protection. Feed via handwheel. Small tool case Machine base optional. Drilling capacity in steel 45mm Projection 230 mm Drilling stroke 125 mm Spindle holder ISO 30 Spindle speeds 75 - 1600 rpm max. cutter diameter 80 mm Table adjustment transverse 560 mm Table adjustment longitudinal 230 mm Table clamping area 800 x 240 mm max. distance between work table and spindle nose 460 mm Connection voltage 230 V Total power requirement 1.1 kW Machine weight approx. 320 kg Space requirements approx. 1.0 x 0.8 x 1.45 m

Drill Bit Grinding Machine: Additional station for grinding back the drill cutting surface (clearance angle) 25tk. Collets ER 40 are included in the scope of delivery, these are also suitable for clamping intermediate sizes. For grinding twist drills made of HSS and Tungsten carbides with a TiN layer of 8 - 32 mm. Rotor with precision ball bearings guarantees smooth running. Vibration-free running due to high weight and rubber feet. Sharpening angle adjustable for all common twist drills. Packaging Dimensions: 430 x 240 x 240mm. Weight 16Kg. Grinding range 8 - 32 mm Sharpening angle min./max. 90 - 140 degrees Connection voltage 230 V Condition: never used / new (5)

"The MAPE 201ML industrial bench is a piece of equipment designed for grinding, deburring and sharpening operations in workshops and industrial environments. This 201ML model from MAPE, in green, combines robustness and compactness for reliable and efficient daily use. Offered as is, it is a practical solution for professionals wishing to integrate or recommission a functional drum. With dimensions of 70 cm in length, 55 cm in width and 113 cm in height, and a weight of 92 kg, this drum offers good stability during use, guaranteeing safety and precision in finishing operations. The MAPE 201ML is therefore a robust and high-performance tool for industrial grinding and part maintenance tasks."

"The MAPE Industrial Drum White Drum is designed for grinding, deburring and sharpening operations in workshops and industrial environments. This white model from MAPE combines robustness and compactness, offering a reliable tool for finishing and maintaining metal parts or other materials. Offered as is, it is a practical solution for professionals wishing to recommission or integrate a functional drum. With dimensions of 105 cm in length, 90 cm in width and 190 cm in height, and a weight of 105 kg, this drum ensures high stability and safe use. The MAPE White Drumstick thus represents a high-performance and durable industrial equipment, adapted to the daily needs of the workshops."

Gear Drilling Machine Tapping device Left / Right Run Tilt work table. Lighting. 2 electr. Speed levels. Depth stop . Gears run in oil. Packaging Dimensions: 2100 x 400 x 710mm Weight 260Kg Drilling capacity in steel 30 mm Projection 250 mm Drilling stroke 130 mm Spindle mount MK 3 MK Table: 380 x 380 mm Column diameter 98 mm Speed 75 - 3200 rpm Feeds mm/U Total power requirement 1.1 kW Machine weight approx. 220 kg. Dimensions L-W-H 0.5 x 0.6 x 2.05 mm Condition: never used / new (5)

This grinder is ideal for regrinding tools such as face mills, drills, TIG welding needles and much more. comes standard with: Accessories for lathe tools Accessories for drills Accessories for milling 5C Spring Collet (4-6-8-10-12 mm) Clutch wrench 38-42 Grinding wheel wrench Allen key M3-M8 Screwdriver Diamond grinding wheel Ø 100 x 50 x 20 Grinding wheel: Ø 100 x 50 x 20 Diamond Pen Spring Collet: 3/16" - 5/16" - 3/8" - 1/2" Grinding range 3 -28 mm Angle adjustable from - to horizontal 0-180 degrees Angle adjustable from - to vertical 0-45 degrees Angle adjustable from - to negative 0-52 degrees Clamping range 3 - 28mm mm Speed 5200 rpm Connected load 230 / 250 volts / watt Disc diameter 100 x 50 x 20 mm Machine weight approx. 45 kg Dimensions L x W x H 0.5 x 0.4 x 0.4 m Condition: never used / new (5)

Equipment: 3-axis digital display Digital depth display Motorized feed for X and Y Left/Right Run Emergency stop Swivelling drill head Spindle protection. Machine Light Tool case with contents Drilling capacity in steel 35 mm Projection 230 mm Drilling stroke 125 mm Spindle holder ISO 40 Spindle speeds 115 - 1750 rpm Table adjustment transverse 375 mm Table adjustment longitudinal 175 mm Table clamping area 1000 x 240 mm Max. distance between work table and spindle nose 120 - 375 mm Connection voltage 400 V Total power requirement 0.85 / 1.5 kW Machine weight approx. 0.95 t Space requirement approx. 1.3 x 1.2 x 2.1 m Condition: never used / new (5)

Key data: 20 mm

0.75 KW 380 V 16 A Röhm Drill Chuck Supra 1 - 13 mm Speed 210 - 2580 rpm With substructure Length 74 cm Width 30 cm Height 98 cm

Beer transport tank in a shipping container, with CIP spray head and manhole. Includes a metering system (max. flow rate: 120 l/min)., Additional title: Stainless steel pressure tank housed in a container, Capacity: 7200 l, Operating pressure: 2,5 bar, Operating temperature: 20 °C, Length: 7,25 m, Width: 2,4 m, Height: 2 m, Features: control, pump, hose reel, flow meter, cable drum, fittings, CIP spray head, manhole

Plant for kilning green malt. Hot air is generated at a steam-heated heat exchanger and passed through the kiln by means of a fan. It is possible to regulate the proportions of fresh and circulating air by means of flaps and a bypass. Control takes place by means of a control cabinet., Additional title: vertical vessel; year of manufacture approx. 2005, Kiln dry capacity: 200 Kg, Width: 1,1 m, Height: 3,2 m, Features: Ventilator (Pollrich Ventilatoren GmbH, 2004), air-shut-off valves (EBRO Armaturen GmbH), circular vessel with Optima strauber-sieve bottom (Steinhaus GmbH), insulated hot water vessel Control cabinet

Operating characteristics, o Feeding in closed pipe., o Outlet is guaranteed under pressure by 2 centripetal pumpsmade in AISI 304., o All material in contact with the product is made in stainless steel AISI 304 or higher., o The outflow system is completed with 2 pressure gauges in AISI 304 stainless steel and 2 micrometric valves to modulate the pressure of the lean and the concentration of the cream., o The sludge discharge is electronically controlled (through a hydrodynamic circuit) and takes place without interrupting the working process. The time interval between the single discharges can be programmed according to the characteristics of the product., o There is an automatic washing program at the end of the work in a closed cycle (CIP). Therefore, disassembly of the bowl is not required., Construction features and equipment, o Platform: fully made in stainless steel AISI 304 with ...

Operating characteristics, o Feeding in closed pipe., o Outlet is guaranteed under pressure by 2 centripetal pumpsmade in AISI 304., o All material in contact with the product is made in stainless steel AISI 304 or higher., o The outflow system is completed with 2 pressure gauges in AISI 304 stainless steel and 2 micrometric valves to modulate the pressure of the lean and the concentration of the cream., o The sludge discharge is electronically controlled (through a hydrodynamic circuit) and takes place without interrupting the working process. The time interval between the single discharges can be programmed according to the characteristics of the product., o There is an automatic washing program at the end of the work in a closed cycle (CIP). Therefore, disassembly of the bowl is not required., Construction features and equipment, o Platform: fully made in stainless steel AISI 304 with ...

Operating characteristics, o Feeding in closed pipe., o Outlet is guaranteed under pressure by 2 centripetal pumpsmade in AISI 304., o All material in contact with the product is made in stainless steel AISI 304 or higher., o The outflow system is completed with 2 pressure gauges in AISI 304 stainless steel and 2 micrometric valves to modulate the pressure of the lean and the concentration of the cream., o The sludge discharge is electronically controlled (through a hydrodynamic circuit) and takes place without interrupting the working process. The time interval between the single discharges can be programmed according to the characteristics of the product., o There is an automatic washing program at the end of the work in a closed cycle (CIP). Therefore, disassembly of the bowl is not required., Construction features and equipment, o Platform: fully made in stainless steel AISI 304 with ...

Operating characteristics, o Feeding in closed pipe., o Outlet is guaranteed under pressure by 2 centripetal pumpsmade in AISI 304., o All material in contact with the product is made in stainless steel AISI 304 or higher., o The outflow system is completed with 2 pressure gauges in AISI 304 stainless steel and 2 micrometric valves to modulate the pressure of the lean and the concentration of the cream., o The sludge discharge is electronically controlled (through a hydrodynamic circuit) and takes place without interrupting the working process. The time interval between the single discharges can be programmed according to the characteristics of the product., o There is an automatic washing program at the end of the work in a closed cycle (CIP). Therefore, disassembly of the bowl is not required., Construction features and equipment, o Platform: fully made in stainless steel AISI 304 with ...

A Gebrüder Irle CNC large-format deep-hole drilling machine is available. Drilling capacity steel: 40mm, max. drilling depth: 1600mm, drill spindle adjustment: 350mm, vertical drilling unit adjustment: 700mm, power: 30kW, speed: 2940rpm, field range constant power: 1-3, armature range constant torque: 1-35, max. drill spindle torque: 1500Nm, rated speed: 163rpm, spindle flange diameter: 200mm, quill diameter: 2000mm. Feed: 500mm/min, rapid traverse: 1200mm/min, max. feed force: approx. 34.3kN, display: 0.005mm, vertical adjustment travel: 700mm, longitudinal adjustment travel: 13000mm, transverse adjustment travel: 650mm, swivel: 85°. Clamping plate dimensions X/Y/Z: 12500mm/1000mm, guide bed dimensions X/Y: 3350mm/455mm, controls: Heidenhain TNC 310. Documentation available. An on-site inspection is possible.

A compact Optimum bench column drilling machine is available. Motor power: 750W, drilling capacity steel: 25mm, continuous drilling capacity: 20mm, spindle taper: MK2, T-slots: 12mm, table dimensions X/Y: 280mm/245mm, quill stroke: 80mm, throat depth: 180mm, column diameter: 73mm, spindle to drilling table distance: 425mm, spindle to base distance: 618mm, speed: 2440rpm. Machine dimensions X/Y/Z: approx. 660mm/330mm/1020mm, weight: approx. 70kg. Without a drill chuck and drill chuck guard. Documentation available. An on-site inspection is possible.

Equipment: Insulation, Overpressure,Manufacturer: ABAB General Tank and Apparatus Construction,Condition: Used,Volume: 10,000,Max. Overpressure: 5.00,Max. permissible Operating temperature : 20,Design: upright,Stand shape: Feet height adjustable,Number of feet: 4,Insulation: available,Insulating jacket: hermetically welded,Material insulating jacket: Stainless steel,Diameter inside: 1,800,Diameter outside: 2,000,Cylindrical height: 4,000,Total height: 5,200,Wall thickness floors: 7,Wall thickness cylinder: 5,Technical documents: Drawing, TÜV papers,Manhole / dome: in cylinder,Type plate: Yes,Equipment: Level indicator