dr hochstrate used for sale

: 12 St. : ca. 90 kg : ca. 710x720x1000 mm drawer measurements: 600 x 600 mm Colour: 7035/5012 RAL Cabinet including assortment of dividers Large drawer usable space Full extension drawers (VA) 100% 8 drawers with internal height 40 mm 2 drawers with internal height 70 mm, 2 drawers with internal height 95 mm, 7 drawers with tray dividers and boxes 3 drawers with rail dividers 2 drawers with foam inserts Ball bearing drawer runners Individual pull-out stop Individual locking possible for each drawer Cabinet without key! Translated with DeepL.com (free version) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data: - Drilling capacity in steel ST 60 28 mm - Drilling capacity in steel ST 60 32 mm - Drilling spindle holder MK 3 - Drilling spindle stroke 150 mm - Drilling spindle speeds infinitely variable 80 - 1170 rpm - 2 feeds 0.1 / 0.2 mm/rev - Projection 290 mm - Max. distance table - drilling spindle 780 mm - Table with 2 T-slots 480 x 400 mm - Height adjustable via rack with hand crank - Drive 400 V / 0.9 / 1.3 kW - Space requirement approx. W 600 x H 2100 x D 900 mm - Weight approx. 420 kg - with: - Right – Counterclockwise rotation - Keyless chuck 1-13 - Lighting

Drilling machine, pillar drilling machine, column drilling machine, tapping machine, thread cutting machine -Manufacturer: Möller, pillar drilling machine type MOE 1132 -Engine: Loher 1.5 kW -Speed: 110 - 1450 rpm, continuously variable right-left rotation -Feed: 0.1/0.2/0.3 mm/rev. -Table size: Ø 370 mm, travel 735 mm -Spindle holder: MK3 -Spindle stroke: 170 mm -Projection: 280 mm -Column Ø: 130 mm -Dimensions: 940/650/H1830mm -Weight: 398 kg with pallet

Drilling machine, bench drill, pillar drill, column drill -Clamping table: with fixed machine vice -Table size: 275 x 325 mm -Spindle mount: MK3 -Protrusion: 300 mm -Speeds: 90-1450 rpm -Columns: Ø 120 mm -Spindle stroke: 125 mm -Translation about: gears Quantity: 1 piece available -Dimensions: 770/660/H2060 mm -Weight: 284 kg

Capacity: 12,7 m³/min. Overall size: mm Weight: kg Electric capacity: kw : m³/min Dimensions (HxWxD): mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 26203 Technical data: - Drilling capacity - in steel 16 mm - - in aluminium 20 mm - Drilling spindle holder MK 2 - Drilling depth 100 mm - Spindle / column projection 215 mm - 6 drilling spindle speeds stage 1 200 - 1600 rpm - 6 drilling spindle speeds stage 2 400 - 3200 rpm - Drive 400 V / 0.7 kW - Drilling table with T-slot W 250 x D 320 mm - Max. distance between drill chuck / table approx. 220 mm - Space requirement approx. W 300 x H 1050 x D 450 mm - Weight approx. 100 kg - Keyless chuck 1 - 13 mm - Coolant device - Original machine cabinet

Offer 26251 Technical data: Drilling capacity in steel ST 60 32 mm Drilling capacity in steel ST 60 40 mm Long spindle MK 3 Drilling spindle speeds infinitely variable 160 - 2250 rpm Drilling spindle stroke 120 mm Projection 293 mm Column diameter 115 mm Machined base plate with T-grooves 400 x 400 mm Max. distance from base plate to spindle 600 mm Emergency stop button E. Footswitch Space requirement approx. W 450 x H 1250 x D 900 mm Weight approx. 250 kg Keyless chuck Table base

In metal case.

table with 4 slots, Incl. matching tool holders

incl. vice, jaw width: 100 mm.

Incl. vice, jaw width: approx. 150 mm

• Drilling units: four • table with one slot • vise, jaw width: 80 mm

incl. Machine vice, jaw width: approx. 135 mm

Spindeldrehzahl: von 220 bis 2500 U/min, Spindelaufnahme: MK 2, Motorleistung: 550 kW, Betriebsspannung: 400 V, Tischabmessungen: 200 x 200 mm

WABROTECH DJ-16 E Magnetic Core Drilling Machine Manufacturer WABROTECH Model DJ-16 E Condition untested Location 73529 Schwäbisch Gmünd DE Lot 25

Maschinennummer: 00874, Betriebsspannung: 220 V, Frequenz: 50 Hz, Anschluss: 315 W, Tischdurchmesser: 250 mm

ASSFALG ASM-125/S Drill Grinder Manufacturer ASSFALG Model ASM-125/S Year 1987 Condition untested Location 72589 Westerheim DE Lot 164

Additional technical specifications: • max. tube diameter: approx. 30 mm • Chuck clearance: 30 mm • max. clamping length: approx. 3200 mm

Drehzahl: von 200 - 2800 U/min, Bohrtiefe: bis 100 mm

Maschinennummer: 831285, Schleifscheibendurchmesser: ca. 160 mm

SOLID TB 15 Bench Drilling Machine Manufacturer SOLID Model TB 15 Condition untested Location 72589 Westerheim DE Lot 37

Attention: the tapping head seen in the photos is not included in the scope of delivery! Additional technical specifications: • Drilling units: three • table with one slot

Betriebsspannung: 380 V, Nennstrom: 16 A, Frequenz: 50 Hz, Tischabmessungen: 340 x 230 mm

Additional technical specifications: • Drilling machines: a total of six drilling machines • Vices: three vices • jaw width: 150 mm

Incl. frame.

REXON SB 25/16 G Column Drilling Machine Manufacturer REXON Model SB 25/16 G Year 1990 Condition untested Location 72589 Westerheim DE Lot 166

Incl. vice, jaw width: 160 mm

REXON SB 25/16 G Column Drilling Machine Manufacturer REXON Model SB 25/16 G Year 1990 Condition untested Location 72589 Westerheim DE Lot 167

Drilling Ø: 35/40 mm Spindle holder: MK 3 Drilling stroke: 140 mm Projection: 293 mm Drive motor: 380 V, 1.5/1.9 kW Weight: 285 kg Space requirement: 900 x 550 x 1830 mm

: gebraucht : 2017 : 3901 : China : 8490 € : 1 : 6790 € : 32 mm : MK 4 : 300 - 1.000 mm : 32 - 2.500 (16) U/min : 1760 mm : 800 mm : 2080 mm : 1600 kg : 530 - 1.000 mm : 2.2 kW : 240 mm : 250 mm : 0,75 kW : 0,10 - 1,25 (8) mm/U box table 600 x 455 x 455 mm coolant equipment machine lamp mechanical clamping for height adjustment and spindle stock electr. clamping for arm rotation machine and equipment according to the CE-regulations operating manual in GERMAN and ENGLISH BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:https://www.hesse-ma ...

Code: 0481 Brand: VITAP Model: BM 13/S - CE Standard Multiple boring machine with 13 spindles for furniture, carpentry, panels, kitchens, bathroom cabinets and various - CE Standard Technical data: N°13 spindles Center-to-center distance between spindles 32 mm Total center-to-center distance between the first and last spindles 384 mm Table dimensions 600 x 400 mm Max drilling depth 70 mm Min spindle speed 2800 rpm Motor power 1,5 Hp Compressed air pressure 6/8 atm Overall dimensions mm 750 x 560 x 1200 h Weight kg 160

: gebraucht : 2021 : 3966 : prompt, Zwischenverkauf v : Taiwan : 15600 € : 1 : 12480 € : 42 mm : MK 4 : 280 - 1.100 mm : 44 - 1.500 (12) U/min : Stahl: M 25, Guss: M 38 : 1880 mm : 870 mm : 2210 mm : 1800 kg : 470 - 1.270 mm : 0,05 - 0,15 (3) mm/min : 2.2 kW : 260 mm : 280 mm : 1.725 x 715 x 180 mm : 0,75 kW : 635 x 520 x 415 mm : 2530 mm DEMO MACHINE left/right rotation automatic feed drilling depth limit manual headstock adjustment with mechanical clamping electric height adjustment of extension arm and mechanical clamping mechanical clamping of swivel movement of extension arm central operation panel on the front side power load readout for drilling spindle hand wheel for spindle fine feed coolant equipment machine lamp box table machine and equipment according to the CE-regulations operating manual in GERMAN and ENGLISH BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENC ...

Key data: 32 mm, 850 mm

Radial drilling machine Manufacturer: Danube Type DR32 Drilling capacity: Maximum 32 mm in steel. Tool holder: MK 4 (Morse taper). Speed range: Approx. 41 to 1,800 rpm Quill stroke: 190 mm to 200 mm. Projection: Flexibly adjustable from approx. 240 mm to 850 mm Table size: 1,200 x 600 mm Typical functions Tapping device: Integrated automatic for cutting threads (e.g. up to M26 in steel). Feeds: Automatic quill feed in several stages Coolant device: Integrated pump and coolant trough directly on the work table. Machine is in a used condition, clamping Z axis makes noises when driving up and down. Otherwise the machine is ok.

Offer 26215 Technical data: - Drilling capacity 28 mm - Drilling spindle holder MK 3 - Tightening thread M 12 - Drilling spindle speeds - level 1 120 / 215 / 360 / 600 / 1080 rpm - Level 2 240 / 430 / 720 / 1200 / 2150 rpm - Drilling unit height-adjustable by hand crank - Smallest / largest distance table / boring spindle 60 / 390 mm - Drilling spindle stroke 100 mm - Spindle fine stroke adjustment by handwheel - Drilling spindle projection 260 mm - Coordinate table with 3 T-slots 600 x 240 mm - Table travel X-axis 350 mm - Y-axis 160 mm - Drive 400 V / 0.7 / 1.3 kW - Space requirement approx. W 800 x H 1800 x D 900 mm - Weight approx. 300 kg

Drilling Ø: 31.75 mm Spindle holder: MK 3 Speeds stepless. adjustable: 180 - 2100 rpm Projection: 280 mm Table size: 350 x 450 mm Large distance between table and quill: 700 mm Drive motor: 380 V, 0.9/1.3 kW Weight: 270 kg

For sale is a used MAXION BT 13 ST bench drill from commercial stock. Technical data: Manufacturer: MAXION Type: BT 13 ST Year of manufacture: 01/1999 Serial No.: 166395 Drilling capacity: max. 13 mm Spindle holder: MK2 Quill stroke / drilling depth: 70 mm Projection: 180 mm Speed range: 420–2,100 rpm, infinitely variable Table surface: 230 × 170 mm Column diameter: 65 mm Total height: approx. 855 mm Motor power: 0.65 / 1.0 kW Operating voltage: 400 V Weight: approx. 65 kg The machine is in a used, age-appropriate condition. Equipment and optical condition according to illustrations. Viewing possible by prior appointment. Errors, changes and prior sale reserved.

For sale is a MAXION UNIMAX column drill, Made in Germany, in a heavy and robust industrial design. The machine is ideal for metalworking, locksmithing, mechanical engineering, maintenance as well as workshop and production operations. Technical data / equipment Manufacturer: MAXION Series: UNIMAX Production: Made in Germany Speed range: approx. 80–3,200 rpm Speed levels / ranges according to the machine shield: 80–720 rpm 160–1,460 rpm 180–1,600 rpm 360–3,200 rpm Pulleys: Ø 60 / Ø 140 mm according to the shift diagram Manual quill feed via large 3-arm hand lever Quick-release/drill chuck Solid height-adjustable work table Machine vise included Emergency stop switch Footswitch Solid machine stand with base plate CE marking The machine is in a used, age- and use-typical condition. Signs of wear and dirt are present and documented in the pictures.  ...

drilling capacity diameter max.: mm table length: mm table width: mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 200 mm Processing width on table: 6000 mm Processing height on table: 3150 mm Processing depth: 1985 mm Slide cross-section: 530 x 550 mm table load: 20 t Plate field size: 11.200 x 5.550 mm tool taper: SK 100 total power requirement: 83 kW weight of the machine ca.: 173 t dimensions of the machine ca.: m Spindle diameter: 200 mm Machining width (X-axis): 6,000 mm Machining height: 3,150 mm Max. machining depth: 1,985 mm Ram cross-section: 530 × 550 mm Table load capacity: 20 t Floor plate area: 11,200 × 5,550 mm Table model: S20 MP Table size: 2,200 × 2,500 mm Tool holder: SK 100 Total power requirement: 83 kW Machine weight: approx. 173 t Includes large and small angular milling heads Internal reference (OB No.): 22979 X-axis machining width: 6,000 mm Includes 6 floor plates, each 5,600 × 1,850 mm The data for this ad was created with ModulMWS - the software sol ...

Column Drilling Machine Alzmetall

2 x Bench Drill Flott

bore capacity in steel (diameter): 32 mm throat: 280 mm bore stroke: 145 mm taper MK: 3 MK table-size: 540 x 480 mm feeds: 0,08 bis 0,32 mm/U turning speeds: 180 - 2000 U/min total power requirement: 3,0 KW weight of the machine ca.: 0,9 t dimensions: 1,2 x 0,8 x 2,4 m Column drilling machine with: - Power feed - Thread-cutting attachment - Coolant pump - Machine light - Incl. machine vice - Emergency stop device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Milling and boring mill Zöllich ZAY7045FG

Column drill Ixion BS 30GL with reinforced motor. Year of construction: 1998. lead screw included. Also included are two drill masters, each with three threaded spindles, as well as an additional spare board.

Rema Grinding and Polishing Machine SMZ57. Speed: 700/1400/2400. 7hp. Year of construction: 07/2001. Double belt tensioning arm + belt tensioning hood.

Roller conveyor, roller track, powered roller conveyor, roller track -Manufacturer: MOSCA, Roller conveyor driven inclined conveyor -Type: SCHÄGFR.F. -Drive motor: Lenze 0.37 kW -Speed: 27 m/min -Roller width: 475 mm -Roller diameter: 50 mm -Axle spacing: 65 mm -Conveyor length: approx. 1500 mm -Base: height adjustable -Dimensions: 1530/710/H1040 mm -Weight: 143 kg

bore capacity in steel (diameter): 35 mm throat: 330 mm bore stroke: 180 mm table surface area: 765 x 620 mm 0: 130 - 1750 U/min feed: 0,1 - 0,2 - 0,3 mm/U tool taper: MK 4 total power requirement: 3,0 kW weight of the machine ca.: 0,7 t dimensions: 1,2 x 0,8 x 2,15 m Drilling machine with: Power feed 2 gear stages Tapping attachment Footswitch Machine light Coolant system Emergency stop device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

double-table traveling column boring machine Software/CNC: Siemens Sinumerik 840D X: 18000 mm - Y: 5000 mm - Z: 1750 mm - W: 1400 mm - B: 360° - V: 3000 mm - U: 400 mm Table dimensions: 4000x3000 maximum workable height 5000mm

1 gebr. Column drill, Flott SB 23 Technical data (Flott SB 23) • Drilling capacity: approx. 23 mm to 25 mm in steel (continuous drilling capacity approx. 23 mm) • Max. drilling depth / stroke: 140 mm • Projection: approx. 300 mm • Spindle holder: MK 2 (Morse taper 2) • Speed range: Variable depending on the version (often approx. 100 to 2,000 rpm via gearbox/V-belt) • Column diameter: approx. 82 mm to 125 mm (depending on the construction generation) • Work table: approx. 415 x 385 mm (with T-slots, height adjustable by hand crank) • Motor power: approx. 0.9 kW to 1.4 kW (pole-switchable) • Electrical connection: 400 V / 50 Hz (three-phase current) • Machine weight: approx. 220 kg to 280 kg • Total height: approx. 1,950 mm

bore capacity in steel (diameter): . mm throat: 368 mm bore stroke: . mm feed: 0,1-6,18 m/min table surface area: 560x470 mm Thread-cutting device The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.