dr hochstrate used for sale

Table dimensions: 285 x 220 mm Auction-ID: A7-46287-40

Stored in working condition, buyer must provide transport himself. Elevator available. Auction-ID: A3-43519-17023

Case Optum 270 in good condition, with all necessary documents. Specifications: Gps RTK, engine brake, front PTO axle, 5 rear valves, 2 center valves, leather interior, air brakes, Isobus, hydraulic top link. Perfect tractor at no extra cost. Auction-ID: A3-43520-34004

Equipped with: T-slot clamping table Auction-ID: A1-45979-103

Connection 380 V. 51.6 kW. Equipped with 9 chains, 10 exhaust motors. Auction-ID: A1-43429-41

Type: Refrigeration dryer Standard: DIN ISO 7183 (7 bar, 35 °C inlet, 25 °C ambient, +3 °C PDP) Nominal flow (50 Hz): 6.2 m³/min (372 m³/h, 219 CFM) Nominal flow (60 Hz): 7.15 m³/min (429 m³/h, 253 CFM) Pressure dew point: +3 °C Power consumption: 0.57 kW (50 Hz) / 0.69 kW (60 Hz) Operating pressure: 2 – 16 bar Max. inlet temp.: 65 °C Max. ambient temp.: 50 °C Air connection: 1 1/2\" BSPP-F Electrical supply: 230 V / 1 Ph / 50–60 Hz Refrigerant: R513A (or R134a in older units) Weight: ~55 kg Features: E-Pack aluminium heat exchanger with stainless demister, digital controller with PDP indication, alarm relay, timed drain Energy mode: Optional Energy Save” function for low partial-load power draw Auction-ID: A7-45988-13

Serial number: 4659 Max. turning length: approx. 200 mm Turning diameter over support: 60 mm Turning diameter over bed: 110 mm Incl. manual rod feeder and workbench with stock of machine accessories such as collets as well as various holders, turning steels, open-end wrenches and inserts Auction-ID: A7-46287-24

Machine number: 14018 Table dimensions: approx. 290 x 225 mm incl. small vice, jaw width: approx. 80 mm Auction-ID: A7-46287-37

1x 15 drawers lxbxh 28x48x86cm, 1x 10 drawers lxbxh 28x48x61cm. Includes contents including compressed air couplings, collet sleeves, fasteners Auction-ID: A1-45979-168

Connection 380 V. 50.13 kW. Equipped with 9 chains, 10 exhaust motors; without the TimBird Auction-ID: A1-43429-49

Content consisting of abrasive belts, dies, turning steel holders, turning steels, taps, indexable inserts in various designs Auction-ID: A7-46287-74

Production number: 1154 Operating voltage: 220/380 V Frequency: 50 Hz Connection: 2.5 kW Rated current: 10 A Auction-ID: A7-46287-157

Type: Oil-free piston compressor Model: Kaeser AIRBOX CENTRE 550 with integrated dryer & air receiver Rated power: 3 kW Air flow: 255 l/min Max. pressure: 10 bar Working hours: 2811 h (2533 h under load) YoM: 2014 Pump: Replaced with new unit in 2021 Last service: Kaeser C-Service on 06.10.2022 Maintenance: Regularly serviced Features: Integrated dryer, receiver tank, IE3 motor, refrigeration dryer (dew point +5 °C), oil-free operation Dimensions (D x W x H): 1730 x 820 x 1640 mm Weight: 550 kg ⚠️ Service manual not available. Please view the test video linked with the lot. Auction-ID: A7-45988-14

ATLAS COPCO GA 26 VSD FF – Screw Compressor General data: Manufacturer: Atlas Copco Model: GA 26 VSD FF Machine type: Screw compressor with integrated air dryer and heat exchanger Year of manufacture: 2010 Operating hours: approx. 60000 h Weight: approx. 590 kg Dimensions (L x W x H): approx. 1200 x 1800 x 1500 mm Technical details: Rated power: 26 kW Working pressure: 12.8 bar Drive type: Inverter (VSD – Variable Speed Drive) Integrated air dryer: yes Integrated heat exchanger: yes Description: Industrial screw compressor Atlas Copco GA 26 VSD FF equipped with inverter drive technology for energy-efficient operation. The unit includes an integrated air dryer and heat exchanger, ensuring high-quality compressed air supply and optimized performance for industrial applications. Auction-ID: A7-45988-17

with two drilling units with 4 drilling spindles each Auction-ID: A7-46287-149

Equipped with: adjustable drilling table Auction-ID: A1-45979-119

YCR260 – Pile Driver for Solar Farms General data: Machine type: Pile driver Model: YCR260 Year of manufacture: 2025 Engine: Yanmar diesel Engine power: 47 HP Operating weight: approx. 4300 kg Technical details: Mast length: 6000 mm Rotation: 360° Hydraulic breaker power: 900 – 1200 J Travel: Fast and slow forward / reverse Mast movement: 6 directions Condition: Fully operational Additional information: Loading assistance available Description: Modern pile driver designed for installation of posts in solar farm projects. The machine offers high mobility, precise mast positioning, and strong hammer performance, making it suitable for efficient and accurate pile driving in renewable energy installations. Auction-ID: A7-40553-16

Machine number: 144359 Speed range: up to 1600 rpm Table dimensions: approx. 290 x 225 mm Auction-ID: A7-46287-14

Type: Refrigeration dryer with thermal mass control Model: SECOTEC (type TA 8 or higher) YOM: 2013 Flow rate: 2.55 m³/min Power consumption (100% flow): 0.80 kW Power consumption (50% flow): 0.53 kW Pressure loss: 0.20 bar Air connection: G 1 Condensate drain: G 1/4, ECO-DRAIN 30 with ball valve Electrical supply: 230 V / 1 Ph / 50 Hz Dimensions (W x D x H): 620 x 540 x 963 mm Weight: 116 kg Features: SECOTEC controller with dew point trend display, cycling refrigerant compressor, insulated cold surfaces, floating alarm contacts Auction-ID: A7-45988-22

Tables can be adjusted at an angle. Auction-ID: A1-45979-146

1x Type DDF440, 1x Type BTD134, 1x Flashlight Type BML145 Auction-ID: A1-45979-188

Machine number: 15212 Speed: 125 to 3000 rpm Drilling depth: 160 mm Table dimensions: 400 x 300 mm with two grooves Auction-ID: A7-46287-96

Connection 380 V. 57.13 kW. Equipped with 9 chains, 9 extraction motors. Auction-ID: A1-43429-57

Equipped with: adjustable drilling table Auction-ID: A1-45979-117

STANKOIMPORT 3659M sharpening machine, suitable for drills and countersinks. Solid, heavy-duty industrial machine, ideal for workshop, toolroom or maintenance use. The machine is offered in used condition, with visible signs of age as shown in the photos. Visible machine details • Manufacturer: STANKOIMPORT • Model: 3659M • Serial number: 77045 • Included in sale • machine as shown in the photos Condition • used • sold as seen Auction-ID: A7-46285-10

Serial Number: 261891 Operating Voltage: 230V Frequency: 50Hz Rated Current: 3.65A Auction-ID: A7-46287-145

Vitap Sigma 2TAS Through Drill 4 vertical drilling units of two heads each 2 side spur spindles Spindle spacing 32mm Length of the processed material max 2500mm min 240mm Drilling depth up to 70mm Pneumatic Material Clamps Year of manufacture 2006 CE mark Machine Weight 1600kg Net price

Case maxxum 5120, Stands on fat tires, Powershift on the gearstick, 10500 operating hours, Front linkage, Air, 2 air horns on the roof, Drawbar with k80, Lift with catch hooks, 3x double-acting valve, Hydraulic brake valve, Auction-ID: A1-40136-33

Year of Make: 2019 Serial Number: 172242 Auction-ID: A1-46037-2894

Equipped with 3x double-acting rear hydraulic valve (1x electronic and 2x mechanically operable PTO speed 540/540E/1000/1000E 4 cylinder diesel engine with 105HP Dealer maintained user manual present equipped with air conditioning electronic rear linkage Auction-ID: A1-40136-12

Auction-ID: A1-46037-2979

consisting of 10 parts, different lengths; height adjustable from 700-1100 mm; roll spacing h.o.h. 100 mm; Auction-ID: A1-41994-109

Diameter wheels 1300mm including Vicon rake 4 wheels Auction-ID: A1-40136-267

Connection: 230V Auction-ID: A1-46037-2870

Engine Type: 4-cylinder diesel, turbo, Capacity: 3.9 litres, Power: ±82 hp, Max speed: 2500 rpm, Torque: ±82 Nm at 1600 rpm, Pump capacity: ±39–47 l/min, Rear lifting capacity: ±3560 kg, Power take: 540 / 1000 rpm, 3 double-acting rear valves, powershift, electronic all-wheel drive, radio, heater. Auction-ID: A1-40136-187

Equipped with Autopower 45km/h; PTO: 540/540E/1000 rpm; 2 double-acting hydraulic valves; fender control; Front linkage with PTO; front axle suspension; \"Mailleux\" Front Loader; tipper knob; hydraulic brake valve; top link; Auction-ID: A1-40136-50

Equipped with air conditioning, radio, PTO: 1000 540 540E, mileage increases slightly, 6 cylinder, 115 hp, 220 liter tank, Auction-ID: A1-40136-36

mileage - 3,800 operating hours, radio, air conditioning, windshield roller blind, mechanically adjustable driver's seat, front tire 380/85-24, rear tire 420/85-34 Auction-ID: A7-46293-4

Starting with a cable, checking electronics Auction-ID: A1-40136-197

Extra options : Batteries from 2024 Internal charger Technical data Drive type Battery Brush working width (mm) 430 Working width, vacuuming (mm) 850 Tank for clean/dirty water (l) 40 / 40 Battery (V) 24 Brush speed (rpm) 180 Contact pressure brushes (g/cm²) 50 Water consumption (l/min) 2.6 Rated power input (W) up to 1100 Dimensions (L x W x H) (mm) 1249 x 537 x 1145 Viewing day by appointment Auction-ID: A1-43890-49

• Type: Autonomous scrubber dryer / floor cleaning robot • Operation unknown • Working width: 70 cm • Squeegee width: 90 cm • Clean water tank capacity: 90 litres • Tank capacity dirty water: 90 litres • Battery: 24V, 180 Ah gel battery • Autonomy / working time: up to 4 hours • Charging time: depending on charger, usually several hours Performance • Theoretical capacity: 1260 m²/h • Practical capacity: approx. 1050 m²/h (low obstacle density) • Travel speed: 1.8 km/h • Turning radius: 1.4 meters Dimensions & Weight • Length: 135 cm • Width: 90 cm • Height: 128 cm • Weight empty: 252 kg • Ready-to-use weight: up to 471 kg (depending on configuration) Smart features • Can be operated autonomously and manually • Touchscreen operation (multiple languages, incl. Dutch) • 360° safety sensors • Laser/LiDAR navigation •  ...

Features: - New front tyres - Remanufactured cylinders - New head gaskets Auction-ID: A1-40136-92

Serial Number: 160823 Year of Make: 2017 Auction-ID: A1-46037-2959

Cutting width 2600mm, height adjustable, leaks a little oil when height adjustment. Auction-ID: A1-40136-191

Has water in the oil Auction-ID: A1-40136-287

Year of Make: 2020 Serial Number: 1100007 Auction-ID: A1-46037-2978

Equipped with: Case IH 2130 Pro 4WD, diesel, PTO and hydraulic connections available, open version, cab available is included in purchase (see photos), 3-cylinder diesel, 4-stroke, direct injection, displacement: approx. 1,957 cm³, power: approx. 38 kW (± 52 hp) at 2338 rpm, permanent all-wheel drive (4WD), 12 forward / 12 reverse gears, mechanical, top speed: approx. 29 km/h, PTO (PTO): 540 / 1000 rpm, hydraulics: open center system, 3-point linkage cat. 1, Lifting capacity: approx. 2.2 – 2.8 tonnes (depending on position), Wet multiple disc brakes, Steering: Hydrostatic, Weight: approx. 2.1 – 2.2 tonnes, Dimensions length: approx. 3.45 metres, Width: approx. 1.15 – 1.98 metres (adjustable track), Height: approx. 2.35 metres, Wide agricultural tyres, Rear hydraulic valves, Towbar / linkage, 7-pin plug rear, Hyd. Connection right side, reversing lever on handlebar. Auction-ID: A1 ...

Year of manufacture: 2018 Serial Number: 165768 Auction-ID: A1-46037-2893

Vacuum drying chamber with a capacity of 5m long. Equipped with hydraulic clamp unit from top to bottom to keep the wood flat. including all accessories. Was delivered in 2018 and moved in 2019 to a location where unfortunately there was too little power so it has not run anymore. Has been standing still for several years, trolley stored outside, drying room and HF Unit dry inside. Is prepared outside when sold so that a loading crane can lift it. Can bring fresh wood such as maple or poplar to a moisture percentage below 10 percent in 1.5 weeks. European oak from fresh to kd in 3 weeks. Works with vacuum and a microwave signal through the wood, without air in the room. See Canadian Woodworks on Youtube for info. Spruce and larch can be kiln-dried within a week. Purchase price including import costs €67,000 excl. Equipped with drying chamber, control cabinet, external rails with electr ...

A refrigeration system / drinking water storage tank from the companies DK-Kälteanlagen / Daxner is offered Technical data: Manufacturer: DK-Kälteanlagen GmbH Emsdetten/ Daxner Model/ Type: KWE 950 with Aggr. SIL AGD 4590 ZTZ Year of Make: 2022 Capacity: 950 ltr. Max. operating overpressure: 6 bar Max. operating temperature: 95 degrees C Standards: DIN 4753, DIN 1988 Refrigerant: R 449A Corrosion protection: Two-layer enamelling The device is part of a complete sourdough plant, which is offered in a separate advertisement. It is currently with our customer in Pasewalk and is being sold due to restructuring. Only the offered assets are expressly sold, any items that can be seen in the photos are expressly not part of the scope of the offer. We sell the assets on behalf of our customers. The offer prices are net prices in EURO ex works. Since these are used assets, w ...