dr hochstrate used for sale

Number of spindles hole row: 16; Number of spindles horizontal: 5; Cup belt drill head: yes; Drill pitch: 32mm; Hold-down : yes / pneumatic; Power consumption: 2.2kW; Drilling unit: swivelling;

Dowel hole drilling device: pitch 16, 22, 25, 32; Drilling depth: 145 mm; Elongated hole length: 240 mm; Height adjustment range: 135 mm; Motor power: 1.5kW; Speed: 2800 rpm; Hold-down: manual; Machine length: 1280 mm; Machine width: 960 mm; Weight: 300 kg;

Number of spindles hole row: 11; Number of spindles horizontal: 3; Cup belt drill head: yes, Blum; Drill pitch: 32mm; Power consumption: 2.2kW; Drilling unit: swivelling;

Dowel hole drilling device: no; Drilling depth: 150 mm; Elongated hole length: 180 mm; Height adjustment range: 145 mm; Motor power: 1.5kW; Speed: 3000 rpm; Extraction connection: 100 mm; Machine length: 1280 mm; Machine width: 960 mm; Weight: 240 kg; Solid slotted hole drilling machine with 2 lever controls.

Number of Spindles: 20; Drill pitch: 32mm; Power consumption: 1.8kW;

Dowel hole drilling device: pitch 16, 22, 25, 32; Drilling depth: 150 mm; Slotted hole length: 250 mm; Height adjustment range: 145 mm; Motor power: 1.5kW; Speed: 3000 rpm; Extraction connection: 100 mm; Machine length: 1280 mm; Machine width: 960 mm; Weight: 160 kg;

racks: 17; support tube spacing: 60mm; rack length: 650mm; langth: 200 - 2000mm; rolls: Polyamid 4 Stück; depth: 870 - 1180mm; height: 198mm; safe load: 400kg; The user-friendly Varioflex drying rack is a space-saving and gentle solution for storing painted workpieces. The four swivel castors mean that it can also be used for transporting workpieces. Its solid tube frame design can be adjusted between 200 mm and 2,000 mm. With 17 inside and outside plastic-coated support tubes on each side, the rack can support up to 400 kg of evenly distributed weight. The plug-in inside and outside support tubes can be taken out and re-inserted as needed. When not in use, the drying rack can be collapsed and takes up minimal space.

Dowel hole drilling device: pitch 16, 22, 25, 32; Drilling depth: 145 mm; Elongated hole length: 240 mm; Height adjustment range: 135 mm; Motor power: 1.5kW; Speed: 2800 rpm; Extraction connection: 100 mm; Machine length: 1280 mm; Machine width: 960 mm; Weight: 250 kg; Solid slotted hole drill with a lever operation.

Silver coin Greece 500 drachmas membership in the common market 1979 proof, silver .900 rough weight 13 gr, KM122, shrink-wrapped

Dowel hole drilling device: pitch 16, 22, 25, 32; Drilling depth: 180 mm; Elongated hole length: 240 mm; Height adjustment range: 160 mm; Motor power: 2.2 kW; Speed: 3000 rpm; Extraction connection: 100 mm; Machine length: 1280 mm; Machine width: 960 mm; Weight: 260 kg; Work table can be rotated by 60 degrees on both sidesSimple operation via one-hand lever for fast and precise workDrill head mounted on double guideClamp stops allow easy and quick adjustment of the drill head runHeight adjustment of the drill head via handwheel with numerical

Dowel hole drilling device: pitch 16, 22, 25, 32; Drilling depth: 145 mm; Elongated hole length: 240 mm; Height adjustment range: 135 mm; Motor power: 1.3 / 1.8 kW; Speed: 1400 / 2800 rpm; Hold-down: manual; Extraction connection: 100 mm; Machine length: 1280 mm; Machine width: 960 mm; Weight: 300 kg;

Gripper function Diameter 150-850mm tilt forward/back 0-90, Turn left right +90 / -90 Battery 12 V 70 AH without charging rack without battery without charger Auction-ID: A1-45975-25

Dowel hole drilling device: pitch 16, 22, 25, 32; Drilling depth: 145 mm; Elongated hole length: 240 mm; Height adjustment range: 135 mm; Motor power: 1.5kW; Speed: 2800 rpm; Hold-down: manual; Extraction connection: 100 mm; Machine length: 1280 mm; Machine width: 960 mm; Weight: 300 kg;

Headers – John Deere 730FD Manufacturer: John Deere Model No.: 730FD Year of manufacture: 2018 Model year: 2019 Working width: 9,100 mm Net weight: 3,344 kg Serial number: 1H0730FDAJ0805002 Type: Draper Cutterbar Transport trolley – Ziegler SWW-4WT Manufacturer: Ziegler Model No.: SWW-4WT Year of Make: 2020 Type: Cutterbar Trolley Permissible. Total weight: 6,000 kg Front axle load: 3,000 kg Axle load rear: 3,000 kg Version: 4-wheel John Deere 730FD (9.1 m) cutting unit including matching Ziegler SWW-4WT transport trolley, built in 2020. Auction-ID: 04L-N1Y-1

Drill Comec FMC 900+ AGG Automatic loading from the magazine Number of spindles 3 Number of milling spindles 1 3kw main motor 0.5kw milling machine motor Element length max 900mm Element width max 100mm Maximum drilling distance 800mm Use in large series of chairs, beds, cots as well as in components of other furniture Net price

Drilling and sawing machine for side rails Franke type SG Technical data: Station 1: Cutting components to length Station 2: Drilled on the front side in increments of 27, 32 or 60 mm, 95 mm deep Station 3: drill another hole on the front side or the holes from station 1 are blown out Station 4: Deflection Testing

Gripper function Diameter 150-850mm tilt forward/back 0-90, Turn left right +90 / -90 Required battery 12 V 60 AH without charging rack without battery without charger Auction-ID: A1-45975-26

Very well preserved compact drying chamber MÜHLBÖCK type QLSF-2x1,2-3x1,2-13 / Built in 2004. Complete system including control. Heat requirement 330 kW. Plant still in operation! Complete transport by truck is possible. Only the counterweight has to be dismantled. If necessary, the matching heater can also be supplied. Dismantling/transport possible on your own. Dimensions / data: see attached drawing

Column Drill Knuth Type SSB 35X Technical data: - Power (kW): 2.4 - Voltage (V): 400 - Frequency: 50 Hz / 3 phases - Various drills and drill holders: included - CE

Fluid bed manufactured by INOJETT in 2004. Model IEV800-001-2004 Peripherals included: DFO 4-32-R baghouse Air heater Technical characteristics Model IEV800-001-2004 Year of manufacture 2004

Cyclon heat-insulated from the GEA brand model CYCLONE CHE 394. Year 2017. With 2 cards. Bottom outlet DN100. Top Entry Clamp 1" Clamp 1" and 4" side entrances. No documentation. Cyclon Dimensions: Length 650 mm Width 560 mm Height 1510 mm Technical characteristics Model CYCLONE CHE 394 Year of manufacture 2017 Equipment dimensions INTERIOR BODY WIDTH 560 INNER BODY LENGTH 650 INTERIOR HEIGHT BODY 1510 Transportation Information Length 2150 mm Width 992 mm Height 1100 mm Documentation No documentation Status In your state Manufactured by GEA WESTPHALIA

Hole drill WILTEC 2 pieces, without additional accessories

1x Type DDF440 18V, 1x Type BTD134 14.4V, 1x Flashlight Type BML145 14.4V, Charger Type DC18RC. Auction-ID: A1-45979-189

electrically driven drum volume: approx. 580 x 520 x 520 mm (estimated volume) drum with 8 sides distance from parallel sides to each other: approx. 560 mm Auction-ID: A7-46287-194

The tractor is in good optical condition but has a technical problem. Problem with clutch and/or gearbox (shifting problem), the engine was overhauled about 500 working hours ago. Auction-ID: A3-43520-34071

Read operating hours: 842. Auction-ID: A1-45979-79

Machine number: 6016 Speed range: 320 to 1600 rpm Table dimensions: approx. 290 x 220 mm (clamping surface of the table) Auction-ID: A7-46287-226

Machine number: 133979 Speed range: 900 - 10,000 rpm Table dimensions: approx. 200 x 200 mm Auction-ID: A7-46287-35

Machine number: 181578 Table dimensions: 290 x 225 mm Speed range: 240 to 3800 rpm Auction-ID: A7-46287-4

The long-hole drill is in used but working condition. Always been well maintained. Auction-ID: A3-43519-34006

Including contents, consisting of: drills, clamping tools, milling, etc. Auction-ID: A1-45979-54

Grinding is accurate and rapid, easy operation with no skill to grind. With diamond grinding wheel, it can be equipped directly with an accurate angle and long service life. The electrically controlled and powerful DC motor: stable frequency, strong horsepower and long service life. Bearing shaft and locking unit. The machine is set up with the function of adjusting a point (central point) size, which can effectively coordinate with the material of drill hole and the rotation speed. It can control the quality precision and prolong the service life of the drill bit. Standard with CBN grinding wheel for the HSS material, Optional SDC grinding wheel for the carbide material. Grinding Range:Φ3-Φ13, Point Angle:100°~135°, Power:AC220V, Motor:120W, Speed:4400rpm, Dimension:32x18x19 cm, Weight:9kg, Standard Equipment:Grinding wheel:CBN (for HSS)×1, Eleven collets:Φ3,Φ4,Φ5,Φ6,Φ7,Φ8,� ...

Machine number: 189368 with a total of 6 drilling spindles Table dimensions: 340 x 300 mm with two grooves Auction-ID: A7-46287-133

Manufacturing number: 4514-02 Nominal temperature: 250°C Voltage: 380 V Frequency: 50 Hz Nominal current: 20 A Connection: 13 kVA Heating power: 12 kW Usable space: 0.563 cbm³ Steam room: 1.01 cbm³ Permissible solvent quantity: 136 g at 180 °C Air exchange: 4.5 cbm³/min Auction-ID: A7-46287-49

Equipped with wooden worktop 120x73cm. Including contents and machine accessories on the cabinet. Auction-ID: A1-45979-182

Serial number: 2961-05 Nominal temperature: 250°C Voltage: 380 V Frequency: 50 Hz Connection: 13 kVA Heating power: 12 kW Steam room: 1.01 cbm³ Permissible solvent quantity: 136 g at 180 °C Auction-ID: A7-46287-48

Type: Refrigeration dryer Standard conditions: DIN ISO 7183 (7 bar, 35 °C inlet, 25 °C ambient, +3 °C PDP) Nominal flow (50 Hz): 0.4 m³/min (24 m³/h, 14 CFM) Nominal flow (60 Hz): 0.47 m³/min (28 m³/h, 16 CFM) Pressure dew point: +3 °C Operating pressure: 2 – 16 bar Max. inlet temp.: 65 °C Max. ambient temp.: 50 °C Power consumption: 0.13 kW Refrigerant: R134a Electrical supply: 230 V / 1 Ph / 50–60 Hz Air connection: 1/2\" BSPP-F Dimensions (W x H x D): 300 x 520 x 400 mm Weight: ~24 kg Features: E-Pack aluminium heat exchanger with SS demister, digital controller with PDP indication, alarm contact Auction-ID: A7-45988-21

Serial number: 36434 Operating voltage: 380 - 415 V Connection: 1.5 kW Speed: up to 1400 rpm Rated current: 5.7 A Speed: from 70 to 2590 rpm Drilling depth: up to 170 mm Table dimensions: 650 x 270 mm with three grooves incl. three-axis digital display from the manufacturer HEIDENHAIN also an attached vice, jaw width: 85 mm and a matching dividing head Auction-ID: A7-46287-93

with two electro-mechanical drives with multi-spindle head 6 tapping units, 4 of which are equipped Distance between the drilling units: approx. 400 mm Auction-ID: A7-46287-189

Equipped with 6 separate UV elements and continuous conveyor; Extraction pipe to 1st bend Auction-ID: A1-43429-8

Natural gas consumption: 6.75 m3 per hour. 21.5 kW switch-on. Equipped with 3 motors with drain. Includes control box. Drain pipes up to main pipe Auction-ID: A1-43429-11

Natural gas consumption: 6.75 m3 per hour. 21.5 kW switch-on. Equipped with 3 motors with drain. Includes control box. Drain pipes up to main pipe Auction-ID: A1-43429-12

Includes: (1x) wooden stand with drills in various types and sizes. Auction-ID: A1-45979-102

Consisting of: (1x) steel cabinet 1130x1300x2000mm with plastic drip tray, (3x) steel drip tray 1780x1240x210mm, (1x) drip tray 1030x830x210mm. Auction-ID: A1-45979-76

Machine number: 00121330 Speed range: 80 - 1400 rpm Table dimensions: 350 x 300 mm Auction-ID: A7-46287-33

Serial number: 1392 Filling weight: 0.67 kg Operating pressure: 18 bar Operating voltage: 230 V Frequency: 50 Hz Rated current: 4.9 A Auction-ID: A7-46287-102

ATLAS COPCO GA 5 FF – Screw Compressor General data: Manufacturer: Atlas Copco Model: GA 5 FF Machine type: Screw compressor with integrated air dryer and air receiver Year of manufacture: 2003 Operating hours: approx. 38000 h Condition: Serviced by Atlas Copco Service history: Available Technical details: Rated power: 5.5 kW Working pressure: 8.5 bar Dimensions: Approx. 1200 x 800 x 2100 mm (including packaging) Description: Industrial screw compressor Atlas Copco GA 5 FF equipped with integrated air dryer and air receiver. Designed for reliable compressed air supply in workshop and industrial environments, offering efficient operation and compact design. Auction-ID: A7-45988-9

Grinding is accurate and rapid, easy operation with no skill to grind. With diamond grinding wheel, it can be equipped directly with an accurate angle and long service life. The electrically controlled and powerful DC motor: stable frequency, strong horsepower and long service life. Bearing shaft and locking unit. The machine is set up with the function of adjusting a point (central point) size, which can effectively coordinate with the material of drill hole and the rotation speed. It can control the quality precision and prolong the service life of the drill bit. Standard with CBN grinding wheel for the HSS material, Optional SDC grinding wheel for the carbide material. Grinding Range:Φ3-Φ13, Point Angle:100°~135°, Power:AC220V, Motor:120W, Speed:4400rpm, Dimension:32x18x19 cm, Weight:9kg, Standard Equipment:Grinding wheel:CBN (for HSS)×1, Eleven collets:Φ3,Φ4,Φ5,Φ6,Φ7,Φ8,� ...

Stored in working condition, buyer must provide transport himself. Elevator available. Auction-ID: A3-43519-17035