dr hochstrate used for sale

pressure:500 t stroke:40 - 160 mm no. of strokes:32 / 48 /min distance between columns:1620 mm distance table/ram, max. stroke up, adjustment up:660 mm table surface area:1600 x 1300 mm table height over floor:750 mm column travel -side:400 x 430 mm ram surface:1400 x 1200 mm ram adjustment:120 mm pressure of drawing cushion in table:60 t stroke of drawing cushion in table:100 mm drawing cushion surface in table:1300 x 810 mm material width of feeder:1000 mm material thickness of feeder:- 6,0 mm feed length:350 mm height beneath floor:0,3 m power requirement:44,0 / 66,0 kW weight:56,0 t Dimensions (WxDxH):3,55 x 2,55 x 5,1/5,8 m height beneath floor without drawing cushion:0,3 m height beneath floor with drawing cushion:1,0 m clutch-/ brake combination:pneumatic; Desch overload protection in ram:mechanical ram counterbalance:pneumatic ram adjustment:motoric drawing cushion in table:pneum ...

pressure:500 t stroke:40 - 160 mm no. of strokes:32 / 48 /min distance between columns:1620 mm distance table/ram, max. stroke up, adjustment up:660 mm table surface area:1600 x 1300 mm table height over floor:750 mm column travel -side:400 x 430 mm ram surface:1400 x 1200 mm ram adjustment:120 mm material width of feeder:1000 mm material thickness of feeder:- 6,0 mm feed length:350 mm power requirement:44,0 / 66,0 kW weight:56,0 t Dimensions (WxDxH):3,55 x 2,55 x 5,1/5,8 m height beneath floor:0,3 m pneumatic clutch-brake combination:Desch Mechanical pincers feed:Obru, BVK 3.10.3

pressure:500 t stroke:40 - 160 mm no. of strokes:32 / 48 /min distance between columns:1620 mm distance table/ram, max. stroke up, adjustment up:660 mm table surface area:1600 x 1300 mm table height over floor:750 mm column travel -side:400 x 430 mm ram surface:1400 x 1200 mm ram adjustment:120 mm pressure of drawing cushion in table:60 t stroke of drawing cushion in table:100 mm drawing cushion surface in table:1300 x 810 mm material width of feeder:1000 mm material thickness of feeder:- 6,0 mm feed length:350 mm power requirement:44,0 / 66,0 kW weight:56,0 t Dimensions (WxDxH):3,55 x 2,55 x 5,1/5,8 m height beneath floor without drawing cushion:0,3 m height beneath floor with drawing cushion:1,0 m pneumatic clutch-brake combination:Desch drawing cushion in table:pneumatic Mechanical pincers feed:Obru, BVK 3.10.3

Cheese pan / layered cheese pan / curd tub / drain versatile use Dimensions: Length x Width x Height: 61 x 62 x 81 cm Content approx.: 75 litres Expiration NW: 50

used Watermaster Classic suction excavator / dredger construction year: In 1993 working weight: approx. 19 metric tons transport length: 12.4 m transport height: 3.2 m transport width without side pontoons: 3.2 m pontoon frame height: 1.2 m spoon: 360 l shovel: 700 l

BTS-Drum Press for Metal drums / Plastic drums The BTS-Drum Crusher is ideal for compacting 30 to 200 Lt. barrels but also plastic drums. The Drum Press impresses by its ease of use and throughput quality. By compacting drums users receive a volume reduction up to 90%, the compacted material is much easier to handle and saves enormous logistic and storage costs. The compacted drums can be fed back properly into the recycling cycle. - Compaction up to 90% - Enormous cost reduction of drum disposal - 30 Lt oil collection tray with tap connection - Compaction head with spikes for piercing the drums for escape of air during the pressing process - Maximum safety standards by totally enclosed chamber - Useable for 30 to 200 Lt. steel drums and plastic drums - CE-certified - Quality product Made in Europe Pressing force: 24 Ton Motor: 11 kW 32 Amp Power supply: 380-400 V (3 Ph ...

! A B S O L U T E R S O N D E R R R E I S ! Drill grinding machine manufacturer Avyac from France, Built in 1983, Weight 800kg, Fully automatic with praezisions 6 jaw lining for drills up to 51mm. All dimensions of a drill can be adjusted. Machine under power ready for use. Special price Alzmetall Gühring Garant MK2 MK32 MK4 MK5 Flott Gillardon

Manufacturer: SABROE Tip: SV 140 off; very good

filling capacity: 800 kg max. workpiece height: 900 x 300 mm workpiece weight: total 500 kg container volume: 878 l max. workpiece weight: 30 kg/Stck. revolutions per minute: 22 U/min filling amount: 50-60 % Colour: blau 5015 RAL 0: 1175 x 440 mm total power requirement: 3 kW weight of the machine ca.: 1995 kg dimensions of the machine ca.: 2,9 x 1,33 x 1,75 m Video available on our website.: Electric 400 Volt: New deburring machine for safe and to efficiently deburr workpieces. Suitable for heavy applications. 6 - square drum lined with durable, vulcanized rubber thickness 36 mm, locking cover with gas pressure springs, roller shutters to protect againstthe rotating Container, stable design, easy operation. Control by timer on control surface, main and emergency stop switch. The maximum fillingquantity is 40% of the container volume and corresponds to 800 kg consisting of 500 kg workp ...

Magnetic drilling machine, magnetic drilling machine Core hole drilling machine, Metal core hole drilling machine DR. BENDER Type EK 323 Masch No. 180543 Year of construction approx. 1988 Drilling capacity 23 mm Spindle holder MK 2 Spindle speed 160 / 400 / 1250 rpm. Magnet 215 x 105 mm Drilling unit 220 Volt, 50 Hz, 1025 Watt E-magnet 220 Volt, 50 Hz, 65 Watt - Spindle speed via 3 gear stages - Left and clockwise rotation - E-magnet KOCH, type KL32/6 - Drill head height adjustment guided in a linear guide - manual expulsor - Drill stand rotatable on magnetic base, clamping via toggle screw Dimensions L x W x H 680 x 380 x 630 mm Weight 35 kg good condition; used

Power: 1.1kW; Drilling capacity steel / continuous drilling capacity: 30mm / 25mm diameter; Speed range: 120 - 1810 rpm; RPMs: 9; Spindle mount: MK-4; Drilling stroke: 120 mm; Spindle projection: 254 mm; Table size: 475 mm x 425 mm; Tilt / rotate drilling table sideways: 45Â left / 360Â; Column diameter: 80 mm; Quick-release chucks: 1 - 16 mm; Weight: 132 kg; Industrial motor User-friendly safety switch according to IP 54 Digital drilling depth and speed display integrated in the housing Separate emergency stop impact switch Precision spindle bore Safety electrical system in 24 V DC voltage Guaranteed concentricity less than 0.02 mm measured in the drill quill Drilling spindle with precision ball bearings High-quality high-speed drill chuck Drilling depth stop Precision-crafted, stable drill table with diagonal T-slots and circumferential cooling water channel V-belt cover ...

Power: 0.85, 1.5kW; Speed range: 300 - 4000 rpm; Speed levels: infinitely variable; Spindle mount: MK-3; Drilling stroke: approx. 105 mm; Spindle projection: 200 mm; Weight: 152 kg; Smooth-running and powerful electric motor Two speed settings clockwise/anticlockwise rotation V-belt cover with safety switch Digital speed display integrated in the housing concentricity guaranteed less than 0.015 mm measured in the drill quill Height-adjustable chuck guard with microswitch for the greatest possible protection of the user Machine light integrated in the drill head Drilling spindle with precision ball bearing High-quality quick-release drill chuck as standard Precisely machined drill table with diagonally running T-slots, 360Â rotatable with circumferential cooling water chute Thick-walled cast iron column for high force absorption and stability Solid base plate, large dimensions st ...

Table drill, table drilling machine ALZMETALL type AX 3 T Fabr. No. 3826 Year of construction 1983 Drilling capacity 30 mm Spindle holder MK 3 - long quill Spindle speed 250 - 1600 rpm 5 steps projection 250 / 290 mm Pinol stroke 120 mm Table size 400 x 300 mm Distance spindle-table top max. 700 mm Column diameter 115 mm Motor power 0.75 kW Mains connection 380 Volt, 50 Hz - Spindle speed via 5 V-belt stages - Drill head height adjustment via hand crank approx. 450 mm (column extends downwards through the table top) - Emergency stop button quick-change drill chuck ALBRECHT 1-13 mm Space requirement L x W x H 900 x 600 x 1400 mm Weight 185 kg good condition; used

Motan Central Granule Drying and Conveying System 1x Motan drying bin: Luxorbin A 100 1x Motan drying bin: Luxorbin A 150-L 1x Motan dry air generator: Luxor A 80-N 2x Motan Conveyor: Metro G 06l - HCG incl. pipe sets and piping Year of construction: 2016 Original price 85000 ,- € Plant is partially dismantled Dismantling by the buyer or by us against payment More items - new and used - can be found in our shop! International shipping costs on request!

Complete winding drive, rewind drive, D350mm - D650mm, IBD, mint condition -60% Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Top condition like a demonstration unit The part was removed from a new machine that is proven to have run only about 100 hours of operation. Technical data: Complete winding drive, rewind drive D350mm to D650mm consists of: 1) Total 120 x 86 x 120cm high, 350kg 2) Heavy frame with bearing and shaft, IBD 3) Manually adjustable drum support D350 to D650mm x 430mm long 4) SIMOTICS S synchronous motor, 0,82KW, 1FK7042-2AF71-1CH1, Siemens, 5) Hypoid gear, I=500, SPK+100S-MF3-500-0E1-1S11, Wittenstein, 6) Metal bellows coupling BC2-00300AA032-000-032.000 Wittenstein ...

Crane motor, travel drive Crane bridge drive with gearbox Sliding anchor motor, Schuer motor, three-phase electric motor, brake motor, crane motor, wire rope hoist drive, crane drive, hoist motor, fine lift motor Manufacturer: DEMAG Motor Type: 24/10 KF8-2 Motor No.: 982869 Motor Design: B5 Nominal voltage: 380 VAC Nominal frequency: 50 Hz Power level 1: 0.58 kW = 715 rpm. Power level 2: 2.3 kW = 2900 rpm. with gearbox DEMAG type KS 12 reduction gearbox Fabr. No. 1909104 Gear ratio: i = 118 with impeller for crane track 2 pieces available, price indication per piece; used

Boom drilling machine KNUTH type KAB16 Masch. No. 44715 Year of construction 1987 Drilling capacity in steel 16 mm Drilling capacity max. 23 mm Spindle holder MK 2 Pinol stroke 80 mm Projection 550 mm Spindle speed 290 - 2330 rpm 12 steps Clamping surface 650 x 310 mm Distance between drilling spindle Clamping surface max. 890 mm Column diameter 102 mm Motor power 0.55 kW Mains connection 400 volts, 50 Hz Spindle speed via 12 V-belt steps - Drill head height adjustment via hand crank - Drill head swivels +/- 90- Drill head rotatable on the column and on the boom arm Space requirement L x W x H 1030 x 400 x 1000 mm Weight 140 kg very good condition; used

Drawbar, drawbar, truck trailer -Length: 395 mm -Width: 50 mm -Height: 40 mm -Eye: Ø 43 mm -Price: per piece -Number: 76 pieces -Dimensions: 395/101/H40 mm -Weight: 5.5 kg

Drilling machine, column drilling machine, pillar drilling machine, pillar drilling machine, multi-spindle head, multi-spindle drilling head, drilling gear -with two-spindle drilling head Manufacturer Sigloch Schrieder Type: V602 -Drive power: 1.02/0.88 kW -Drill distance adjustable: 18-110 mm -Max. Drill: 2x Ø 6 mm -Table size: 275 mm -Spindle mount: MK3 -Projection: 220 mm -Speeds: 100-2900 rpm -Columns: Ø 100 mm -Spindle stroke: 75 mm -Transmission -Dimensions: 900/400/H1910 mm -Weight: 230kg

Carbolite Gero AX120 Heating Oven Original price 4561 € Heating cabinets of the Apex AX series are economy laboratory devices for temperatures up to 250°C. The tabletop units are equipped with R38 PID controllers as standard. Digital PID Controller R38 Recirculating air fan for short heat-up times and excellent temperature homogeneity Stainless steel inner chamber Two height-adjustable, chrome-plated lattice shelves Door with locking function and airtight silicone gasket Complies with safety standard BS EN 61010-2-010:2003 Maximum temperature 250°C Minimum temperature RT + 30°C Volume (litres) 128 Temperature homogeneity (°C) ±5.0 250°C Heat-up time (min) 26 Recovery Time (min) 3 Dimensions: Inside H x W x D (mm) 495 x 500 x 520 External dimensions H x W x D (mm) 640 x 790 x 665 Load per grid/total 10/40(kg) Air change per h 14 Max. power (W) 2000 Holding pow ...

Carbolite Gero AX60 Heating Oven Original price 3844 € Heating cabinets of the Apex AX series are economy laboratory devices for temperatures up to 250°C. The tabletop units are equipped with R38 PID controllers as standard. Digital PID Controller R38 Recirculating air fan for short heat-up times and excellent temperature homogeneity Stainless steel inner chamber Two height-adjustable, chrome-plated lattice shelves Door with locking function and airtight silicone gasket Complies with safety standard BS EN 61010-2-010:2003 Maximum temperature 250°C Minimum temperature RT + 30°C Volume (litres) 66 Temperature homogeneity (°C) ±5.0 250°C Heat-up time (min) 25 Recovery Time (min) 3 Dimensions: Inside H x W x D (mm) 395 x 400 x 420 External dimensions H x W x D (mm) 540 x 690 x 565 Load per grid/total 10/30 (kg) Air change per h 28 Max. power (W) 1500 Holding powe ...

Carbolite Gero AX30 Heating Oven Original price 3185 € Heating cabinets of the Apex AX series are economy laboratory devices for temperatures up to 250°C. The tabletop units are equipped with R38 PID controllers as standard. Digital PID Controller R38 Recirculating air fan for short heat-up times and excellent temperature homogeneity Stainless steel inner chamber Two height-adjustable, chrome-plated lattice shelves Door with locking function and airtight silicone gasket Complies with safety standard BS EN 61010-2-010:2003 Maximum temperature 250°C Minimum temperature RT + 30°C Volume (litres) 28 Temperature homogeneity (°C) ±5.0 250°C Heat-up time (min) 23 Recovery Time (min) 3 Dimensions: Inside H x W x D (mm) 295 x 300 x 320 External dimensions H x W x D (mm) 440 x 590 x 465 Load per grid/total 10/20(kg) Air change per h 65 Max. power (W) 1000 Holding power ...

Carbolite Gero AX30 Heating Oven Original price 3385 € Heating cabinets of the Apex AX series are economy laboratory devices for temperatures up to 250°C. Digital PID Controller R38 Recirculating air fan for short heat-up times and excellent temperature homogeneity Stainless steel inner chamber Two height-adjustable, chrome-plated lattice shelves Door with locking function and airtight silicone gasket Complies with safety standard BS EN 61010-2-010:2003 Maximum temperature 250°C Minimum temperature RT + 30°C Volume (litres) 28 Temperature homogeneity (°C) ±5.0 250°C Heat-up time (min) 23 Recovery Time (min) 3 Dimensions: Inside H x W x D (mm) 295 x 300 x 320 External dimensions H x W x D (mm) 440 x 590 x 465 Load per grid/total 10/20(kg) Air change per h 65 Max. power (W) 918 Holding power (W) 342 Weight (kg) 24 Condition: new, without original packaging  ...

Driven Tool, Driven Tool Holder for CNC Lathe BIGLIA fits 100% on a B 501 Y Manufacturer OESTERLE Partner Art.-No. 310 5521 E32 B109 Year of manufacture: approx. 2010 Serial No. 06 - 12 / 0330 Collet holder: ER32 - with a collet 18 mm Weight: 7.5 kg very good condition similar to M.T. ITALY; used

Radial drilling machine, used radial drilling m/c, used Type: BR 56 x 1600 Manufacturer/ make: WMW Year built/ year of make: 1965 Extension/ length of arm: 300...1600 mm Ma. Drilling radius / max. drill. Radius: 1800 mm Drilling capacity at boring: 56 mm ( St 60 ) Drilling capacity at boring: 80 mm ( GGL 20 ) Thread cutting/ thread cutting: max. 65 mm ( St 36 ) 76 mm ( GGL 20 ) Drilling depth/ drilling depth: 400 mm Tool holder / taper in spindle: MK 5 Removal spindle head to base plate/ distance Spindle head to base: max. 1600 mm Base plate/ base: 1700 x 1000 mm Speed range/ range of speeds: 14..1800 rpm Feed: 0.0315 .. 1.6 mm/U// mm per round Connection value: 7.13kW Weight: about 4.5 t

Type: 100 FSG, Y&l: 1986, granulation plant with circular gas operation, sifter 100 ATP (4 kW Vario, up to 11,500 rpm), and reblow filter K 6 R (2.4 m2 filter area). All in stainless steel. Very good condition.

Type: 100 FSG, built: 1986, gas operated granulating rig, spray granulator with two media nozzle, separator, heat exchanger (Manufacturer: Ohl), blowback filter K 6 R (2,4 m²), dosing unit for adding seeds. Mint condition.

Stock number U1984-2 Used impact dryer for pellet by RIETER (Germany) model AERO 500 in stainless steel design (material 1.4541, AISI 321). Dryer is equipped with air blower providing 90 m3/min and driven by electric motor with power 18.5 kW. Dryer has reported output 4000 kg/h of outgoing product. Flow rate of water with pellet: 35 m3/h (maximal), 25 m3/h (nominal) and 20 m3/h (minimal). Nowadays machine has installed screens with mesh 1.2 mm. Machine new 1997. Shipping dimensions of dryer: width 1400 mm x length 3830 mm x height 2265 mm. Weight of machine – 700 kg. Body of drying chamber is sound-muffled. Technical documentation included in german language. Machine had been working on PP pellet.

Stand drilling machine in row arrangement, used Gang drilling machine, used Type: BT 6.52 Manufacturer / make: Steinel Built/ new in: 1978 Drilling capacity / drilling capacity: 6 mm in St 60 Spindle cone/ spindle taper: MK 1 Drilling spindle discharge / distance center drill spindle to column: 204 mm Drilling stroke/ way of spindle: 90 mm Table clamping area/ table size: 800 x 390 mm Column diameter/ diam. of coulmn: 60 mm Drilling spindle speeds / speeds of drilling spindle: 1400 / 2800 / 5600 per min/ per minute Total connection value / rated power: 0.25 kW each => 1 kW Weight / weight: approx. 0.4 t

Manufacturer Heckler & Koch Model AM 444 A Power consumption: 5.5 KW Voltage: 380/400 Volts Spindle holders for vertical and horizontal spindles: 40 Slide movement x = 410nn y = 350mm z = 400mm Vertical clamping table 850 x 255 mm Feed range 0-1500 mm/min Sliding gearbox 12-stage Speed: 63-2800 rpm Step jump 1.4 CNC control CNC 783/m Dimensions (HxWxD) 1.800x2.400x1.700mm Weight 1,500 kg Ref.Nr PLW18 Mistakes reserved!

Illig deep drawing machine Type: UA 150, 14.500 h Runhour! Built: 1986 Closing unit Plate size: 1000 x 1500 Other max. plate size: 1000 x 1500 max. moulding area: 950 x 1450 max. Drawing depth: 600 UA 150 has upper heating small spotlight with 4 position circuit with separate control cabinet underheating has total field control, flat-fitting chip frame autom. Upper stamping system Normal construction with 2 downhill control film throughhang control Protective grille by hand 4 compartment cooling fan + 4 compartment spray nozzle cooling pre-blowers + automatic deforming, reduction frame - quick change device electron. Schleicher control in the separate control cabinet 1 clamping frame for max. mold ingescent

Max. 12 bar, 110 m3/min, year 2001.

New extractor frame 900 mm on steel construction. 2 winding capoles are used underneath for edge-straight Winding positioned. The winding capoles are fitted with new pneumatic Expansion winding shafts for 76 mm bobbins. with electric drives

UP Mini , Uni Push Repair / inspection and replacement pradler gear technology Pradler Transmission Technology info@pradler.com Service and Replacement PradlerGetriebetechnik.de Tel. 05242 / 43186 email: info@pradler

Drum sieve used for SM518 new in stock! Used Drum Screen for SM518 new in stock! Punching: 10 mm rectangle; Material thickness: 6 mm perforation: 10 mm rectangle; Thickness: 6 mm Condition: used/ as good as new (screen drum was only used for one test) Condition: used / like new (drum was only for a short test in use) Available: immediately Available: immediately Location: 77966 Kappel-Grafenhausen (near Freiburg) location: 77966 Kappel-Grafenhausen/ Germany (Near Freiburg) We are happy to organize the transport for you! We can arrange transport for you! We also supply new or other used screen drums to all common screening machines (SM620, SM618, T4, T5, Mustang,). Manufactured in our factory in Germany from German, very high-quality, sharp-edged perforated sheet metal. We also provide new or used screening drums for all standard machines (SM620, SM618, T4, T5, ...

11.80 kW, max. 10.5 bar, 56.50 m3/min.

Floor Type Milling and Boring Machine SKODA Model: WD 250 Offer ID: 452 Manufacturer: SKODA Model: WD 250 New in: 1969 Condition: very good, under power,being serviced Localisation: Poland - We are owner this machine ! Technical details Rotary table: 2 000 x 2 000 mm Floor plates (8 psc): 3 000 x 1 500 mm Spindle diameter: 250 mm Bed haight: 600 mm Bet width: 2 400 mm X Travel: 5 000 mm Y Travel: 4 000 mm Main spindle intersection: 250 mm Main spindle ball metrical: 140 mm Maximum moment on the main spindle axis: 300 000 kgcm Intersection of the rapid spindle: 125 mm Ball in the rapid spindle: 430 mm Maximum depth of boring with main spindle: 2 250 mm Maximum depth of boring with the rapid spindle: 630 mm Feed of the spindle's crosshead: 500 mm The deepest position of the main spindle axis over the bearing: 1 100 mm Dimensions: 12 500x6 000x9  ...

14.5 bar, 22.80 m3/min, refrigerant R 404a.

14.5 bar, 43.50 m3/min, refrigerant R 404a.

max. 14,5 bar, 43,50 m3/min, Refrigerant R 404a.

max. 16.0 bar, 46.67 m3 rpm. Caeltemittel R 404a

max. 16.0 bar, 65.0 m3/min. caelte agent R 404a.

max. 16,0 bar, 65,0 m3/min. Refrigerant R 404a.

Stacking mass (LxWxH)- 16m x 1.4m x 1.6m fully automatic drying via computer Heating capacity - 90 kW Top Condition

Stack dimensions (LxWxH) - 16m x 1,4 m x 1,6 m automatic drying by means of computer Heating power - 90 kW Top Condition

Year of construction 1994 Stack mass: Depth - 2.40 meters High - 3.00 mtr Long - 11.50 meters Drying capacity - са.75 m3 gross Fans - 7 х 0.75 квт Chamber construction - container construction is not desmantlebel! Interior trim - Aluminium welded 2.0 mm Insulation - rock wool 80 mm Outdoor installation Electrical cabinet with computer control system MB-400 Very good condition