dr hochstrate used for sale

Precision Column drilling machine with additional attachments, for precision metal and wood processing and model making. From the same manufacturer as proxxon. New but without packaging

Drying cabinet WLS Model: TR.Schr. 2 for approx. 100 kg pasta 15 Dry planks with time control Approx. dimensions: 2000 x 880 x 2100 mm, WxDxH Connection 400V, 1.5 kW, 16A-CEE plug Used device cleaned Option: Maintenance contract Service Package Delivery Instruction & Commissioning

Transnorm roller curveconveyor driven 90°-670-600 IR800 RA2376 Make: Transnorm Type: TS 2712 Year of construction: 1994 Conveyor angle: 90° Conveyor width: 600 mm Total width outside: 670 mm Role: slide stored with conical plastic molding Support: ask without support, if needed Optionally available: Supports Side guides Frequency converter for stepless speed control Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Antrieb: SEW Getriebemotor Running direction: links/ rechts nominal voltage: 380-500V Construction year: 1994 Drive type: Kette condition: very good (used) Nominal / inner radius in mm: 800 Nominal / outside width in mm: 670 Roll width in mm: 600 angle: 90° Driven: YES Engine type: SEW Eurodrive KW: 0,37/S1 Ampere: 2,25/1,30 Conveyor speed m / s: 0,55 scope of delivery: without supports and side guides Für eine individuelle,  ...

This column drill from HBM is ideally suited for professional use. It has a tilting work table and a keyless drill chuck (1 to 13 millimeters). A pillar drill like this is intended for professional drilling work in steel. The motor power of 375 watts ensures that it can get quite deep into the material to be drilled. The tilting work table and the high-quality keyless drill chuck ensure a pleasant working experience.

General2-Turret Shaft Lathe; Control: Control F32iB CharacteristicsMax machining diameter120 mmWeight approx.3000 KgDrive power main spindle5,5/3,7/3,7 kWRapid feed X / Z20 / 30 m/minMovements X / Z60 / 580 mmLower Turret6 PositionsRapid feed X / Z20 / 30 m/minMovements X / Z60 / 580 mmUpper Turret6 PositionsSpeed max.-3500 rpmMax. Turning Length535 mmDimensions (L x W x H)1,65 x 1,67 x 1,5 mTailstock spindle travel check (4 positions)Tailstock Spindle Travel Check (4 Positions) The tailstock spindle stroke range can be detected by connecting the tailstock spindle and air cylinder with scale function.Foot switch for tailstockFoot switch for tailstock The tailstock spindle is moved in and out with a foot switch.Coolant gunCoolant Gun The magnet type coolant gun is attached to the machine front. Pressing the coolant gun button on the operation panel activates the coolant pump, and depressi ...

On metal base, equipped with 5-point plug.

SKF - Batch of drive components and axles 257KG

General2-Axes Universal Turning Center with driven tools, C-axis; Control: DMG MORI SLIMline® multi-touch control Working areaSwing diameter over guide ways700 mmClamping chuck diameter max.315 mmWork spindle (left)Spindle bore91 mmBar diametre80 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (40% DC)25,5 kWDrive power (100% DC)17 kWSpeed range- 4000 rpmTorque (100% DC)283 NmMax. torque (40% DC)426 NmC-Axis Speed-200 rpmSlide 1Longitudinal stroke830 mmTransverse stroke271 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-4000 rpmPower max. (40% DC)5,44 kWFloor space/WeightDimensions (L x W x H)3,26 x 2,44 x 1,95 (4,5 x 2,44 x 1,95) mWeight approx.6300 KgDMG MORI IoTconnectorIoTconnector connects DMG MORI machines as well as third-party machines with CELOS. Standardized interfaces enable data exchange  ...

Lot solid carbide drills and thread mills Manufacturers: SIEVERT, HOLEX, Sandvik, WALTER and others Drills: from 3 to 11 mm Thread mills: from M3 to M12 approx. 10.0 kg

Machine number: 144359 Speed range: up to 1600 rpm Table dimensions: approx. 290 x 225 mm

GeneralCNC Turning Centre; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways620 mmTransverse stroke260 mmLongitudinal stroke795 mmClamping chuck diameter max.315 mmWork spindle (left)Spindle bore91 mmSpindle diametre on front bearing140 mmMain drive 1Drive power (100% DC)22 kWSpeed range- 4000 rpmTorque (100% DC)410 NmMax. torque (40% DC)525 NmAccuracy at point stopping0,001 degreeTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-6000 rpmPower max. (100% DC)10 kWFloor space/WeightDimensions (L x W x H)3,99 x 2,03 x 2,2 mWeight approx.6500 KgTechnologie cycle alternating speedTechnology cycle for the application of an alternating speed for vibration sensitive set-ups (Only in conjunction with Siemens control)Chuck rinsing device, outsidechuck rinsing device, outside (main spindle)Main s ...

MOBILE HORIZONTAL BORING MILL Inv. No. 11.583B1 Make GIDDINGS & LEWIS Model 230-5 Table 812.5 x 2,812.5 mm Spindle diameter 75 mm Taper MT 5 Horizontal spindle travel Longitudinal travel Cross travel Vertical travel headstock 2000 mm RPM kW Volts 400 Cycles 50 Hz Including: Digital read out

Bore diameter: variabel mm Number of heads horizontal: 1 St. Number of heads vertical: 0 St. 1 Götzinger dowel gluing and insertion machine BLE With the BLE, the workpieces are glued and dowelled on the front. Optional the BLE can be upgraded with a drilling unit, counter milling unit and longitudinal stop will. A 10 touch panel allows easy operation for manual or online operation. Base frame: in a compact design, covered with sheet metal Table support approx. 800 x 200 mm position 1 ---------------------- 1 glue station full jet valve Glue quantity precisely adjustable Glue gun for counter hole gluing position 2 ---------------------- 1 stainless steel glue pump, high-pressure pump and glue hose item 3 ---------------------- 1 press-in station with dowel separation and press-in cylinder item 4 ---------------------- 1 oscillating conveyor for dowels d 8 x 50 mm with feed hose into the  ...

Inv. Num. : 8239 Type: WHN 13 CNC Producer: TOS Created: GO 2004 Parameters: Control system: MEFI X-axis travel: 3500 mm Y-axis travel: 2000 mm Travel distances Z-axis: 1200 mm

Stairwell drill set HSS M2 titanium coated 3 pieces Step drill set M2 Contents: - drill 1 = 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 / 12mm - drill 2 = 2 / 4 / 6 / 8 / 10 / 12 / 14 / 16 / 18 / 20mm - drill 3 = 4 / 6 / 8 / 10 / 12 / 14 / 16 / 18 / 20 / 22 / 24 / 26 / 28 / 30 / 32mm - titanium coated

Unused, handbook available

Rösler Vibratory Grinding Machine incl. Belt Dryer Small, Vibrator Dimensions: Drying plant: H:900 W:900 L:1100 Vibrator: H:1500 B:1800 L:1800 Mounter: H:1700 W:1300 L:2100

Column Drilling Machine ALZMETALL AX2 Cone: CM2 Spindle exit: 100 mm Rotation: from 200 to 500 RPM Table size: Length 370 mm x Width 350 mm Year of construction: 1985 Maxi distance spindle nose/table: 480 mm Throat depth: 250 mm 2 speeds motor Voltage: 380 V Width: 500 mm Depth: 900 mm Total height: 1700 mm Weight: approx 250 kg

Spindle mount MK 3 Drilling capacity in steel: 30.0 mm Coolant pump

electrically driven drum volume: approx. 580 x 520 x 520 mm (estimated volume) drum with 8 sides distance from parallel sides to each other: approx. 560 mm

Drill vise Jaw width 100 mm Clamping range 100 mm Clamping height 40 mm Weight 9 kg Dimensions L x W x H 290 x 130 x 65 mm Condition: never used / new (5)

Inv. Num. : 8206 Type: WHN 13.4B Producer: TOS Created: 1986 Parameters: Control system: Mefi CNC 859 Work table length: 1600 mm Work table width: 1600 mm Maximum spindle speed: 800 1/min X-axis travel: 2000 mm Y-axis travel: 2000 mm W-axis travel: 1250 mm Spindle diameter: 130 mm Machine weight: 32000 kg 2024: Complete replacement of lubricating oil dispensers Spindle bearing repair (new bearings) Replacing the engine with an overhauled engine

Drill Bit Grinding Machine Grinding range 2 - 20 mm Acute angle min./max. 90 - 135 degrees Connected load 230 V Machine weight approx. 8.6 kg Space requirement approx. 0.35 x 0.2 x 0.2 m Condition: never used / new (5)

ERLO TS-32 column drilling machine ; gear-driven version; suitable for precise and powerful drilling work ; Voltage: 380 volts ; Speed: 75–2100 rpm ; 2-speed motor: yes ; Recording: MK-4 ; Extension: 300 mm ; Table size: 400 x 400 mm

Inv. Num. : 8208 Type: W 200 Producer: ŠKODA Created: 1973 Parameters: Maximum spindle speed: 3000 1/min X-axis travel: 4000 mm Y-axis travel: 3150 mm Travel distances Z-axis: 2000 mm W-axis travel: 1600 mm Spindle diameter: 200 mm

autom. boring machine Brand: VITAP Type: SIGMA B1 New machine technical detail: - 2800 mm working table - PLC and touch screen - 2 horizontal boring heads with 21 spindles each prepared for quick chucks - 2 motors each 1,5 kW - the right horizontal boring head is movable with the possibility to pass over the vertical boring groups and fitted on prismatic guide with ball bushes and electronic digital indicator. - Digital position indicators for height regulation of the horizontal boring heads - 2 pneumatic stops - changing horizontal/vertical drilling circuit - Belt conveyors fitted on springs sliding on prismatic guide with ball bushes - Front and side pneumatic pushers - Security on line circuit - 700 mm Infeed conveyor - Horizontal movement of the right head by ball bushes guide with electronic digital indicator - Standard accessories - CE standards Dust ...

Unused, handbook available

Drilling capacity steel/GG: approx. 25 mm Spindle mount: 2 MK Projection: 300 mm Table size: 305 x 380 mm Quill stroke: 115 mm Spindle speeds: 200 - 1200 rpm Drive motor: 380 V, 1/1.5 kW Space requirement: 800 x 400 x 1800 mm Weight: approx. 280 kg

Multi spindle drilling machine Brand: VITAP Type: ALFA DIGIT New machines - QUICK CHANGE SPINDLES - Side reference fences with digital electronic readouts and with manual exclusion for the execution of the system 32 mm drilling holes - Pneumatic cylinder for horizontal/vertical positioning of the boring group - Front caliper with digital electronic readouts - Nr. 2 alu fences with 2 stops each (1500 mm. each) - Quick change fitting of the alu fences with stops - 2 safety clamps inclined 4 degrees - 6 positions turret to adjust the drilling depth (0-80mm) - Height regulation of the boring group by mechanical digital position indicator - Automatic vertical-horizontal depth difference device (10 mm) - Drilling speed adjustment from the panel control - Strengthened steel structure for tilting of the boring group - 1 motor HP. 2 (Kw 1,50) - Start/stop electropne ...

Precision Column drilling machine with additional attachments, for precision metal and wood processing and model making. From the same manufacturer as proxxon. New but without packaging

Serial number: 36434 Operating voltage: 380 - 415 V Connection: 1.5 kW Speed: up to 1400 rpm Rated current: 5.7 A Speed: from 70 to 2590 rpm Drilling depth: up to 170 mm Table dimensions: 650 x 270 mm with three grooves incl. three-axis digital display from the manufacturer HEIDENHAIN also an attached vice, jaw width: 85 mm and a matching dividing head

Unused

Specifications: Drill Diameter: 1.5 - 3 Drill chuck holder: B16 Spindle stroke: 50 mm Projection: 150 mm Column diameter: 46 mm Motor power: 350 W Connection: 230 V Dimensions (WxDxH), approx.: 220 x 450 x 590 mm Weight, approx.: 55 kg Equipment: - Machined foot with T-slots - Sprocket chuck

equipped with automatic cooling system; unused; in suitcase; 5637

TNW Super Condor type 40 pillar drilling machine ; automatic version suitable for precise drilling work ; Voltage: 380 volts ; Speed: 60–1350 rpm ; Recording: MK-4 ; Extension: 350 mm ; Table size: 480 x 410 mm

Tables can be adjusted at an angle.

Hood has broken off.

drilling capacity: 35 mm; drilling depth: 210 mm; speed to N =: 830 rpm; adhesion: 16000 N; power: 1600 kW; connection: 230 V; description: equipped with automatic cooling system; unused; 5637;

Inv. Num. : 8262 Type: PR 99-20 Producer: Cobalm Created: 2011 Parameters: Axis X: 3400 mm Axis Y: 1900 mm Axis Z: 280 mm Cutting thickness: 200 mm

6 pieces, 5x as good as new, 1x sanded. Diameter 33.5 mm, 34.5 mm, 36 mm, 36.5 mm, 37.5 mm, 40 mm

Inv. Num. : 8224 Type: W 100 Producer: TOS Created: 1972 Parameters: Work table length: 1250 mm Work table width: 1250 mm X-axis travel: 1600 mm Y-axis travel: 1120 mm Travel travel Z-axis: 1250 mm Taper: Morse Spindle diameter: 100 mm Equipment: Front panel DRO NEWALL

Radial Drilling Machine OTTO MULLER Spindle: CM4 Spindle speed: from 70 to 1400 RPM Front table size: 1350 x 550 Back table size: 1000 x 400 mm Slide travel: 1000 mm Maxi distance spindle nose/front table: 600 mm Motor: 2 speeds Maxi column rise: 400 mm Auto descent Drilling/tapping function Spindle speed adjustment by belt variation Hydraulic locking Lubricant pump Voltage: 380 V Dimensions in low position: W 1500 x D 2400 x H 2300 mm Weight: approx 2 T

Equipped with: socket

Machine number: 133979 Speed range: 900 - 10,000 rpm Table dimensions: approx. 200 x 200 mm