dr hochstrate used for sale

Linear drive, linear gear, lifting gear, spindle drive, linear axis, toothed belt axis -Manufacturer: IAI, linear actuator type ISA-LXM-I-400-20-1100-T2-X15 -Stroke length: 1100 mm -Number: 1x linear drive available -Dimensions: 1470/165/H95mm -Weight: 25 kg

EVERDRY Absorber for Compressed Air DN600 x 1700

Drive gear for hot forging press K8548 6300T Weight, kg 15 700

Driven gear for hot forging press 6300T Weight, kg 1300

x-travel: 600 mm y-travel: 450 mm z-travel: 450 mm b-axis: +-115/+30 c-axis: nx360 turning speeds: 20.000 U/min Tool adapter: HSK A 63 rapid traverse: 20 m/min Tools changer: Random 75 Pos. table-size: 350×350 mm table weight: 200 Kg Control: HEIDENHAIN iTNC 530 total power requirement: kW weight of the machine ca.: 7,7 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

face driver, face driver, face driver, driver tip, face driver, face driver -Front face driver: Mount: MK4 -Front dimension: Ø 20 mm -Dimensions: Ø 42 x 203 mm -Weight: 1.0 kg

face driver, face driver, face driver, driver tip, face driver, face driver -Front face driver: Mount: MK4 -Front dimension: Ø 19 mm -Dimensions: Ø 34 x 162 mm -Weight: 0.6 kg

linear drive, linear gear, lifting gear, spindle drive, pneumatic drive, slide, guide, electromechanical linear axis, short-stroke linear slide -Manufacturer: Linear drive short-stroke linear slide -Type: 3 842 233 500 -Stroke: 35 mm -Dimensions: 180/60/H35 mm -Weight: 0.8 kg

Dowel drilling machine for window construction or similar

Schulz roller curve 90° roller curve conveyor 450-390 IR800 RA1185 Make: Schulz Angle: 90° Useful width: 390 mm Nominal/outer width: 450 mm Inner radius: 800 mm Conveyor speed: v = 0.35 m/s incl. lateral guides on both sides Roll type: G6/50 plain bearing with conical plastic moulding Transport dimensions: L x W x H = 1600 x 550 x 600 Transport weight: 100 kg Scope of delivery: without supports (if required, please inquire) Optional: Supports Features: Running direction: links/ rechts Antrieb: SEW Getriebemotor nominal voltage: 380-500V Drive type: Round belt condition: very good (used) Nominal / inner radius in mm: 800 Nominal / outside width in mm: 450 Roll width in mm: 390 angle: 90° Driven: YES Engine type: SEW Eurodrive KW: 0,25/S1 Conveyor speed m / s: 0,35 scope of delivery: including side guides without supports Für eine individuelle, fachmännische Beratung setzten Sie sic ...

linear drive, linear gear, lifting gear, spindle drive, linear unit, linear guide, linear axis -Manufacturer: RK Rose Krieger, linear unit -Type: 70230100700 210792 /10 -Travel: 500 mm -Shaft: Ø 8 x 25 mm -Dimensions: Ø 30 x 725 mm -Weight: 1.7 kg

These used compact and versatile cold rolling line is completely modular and do have two bull blocks and works in addition with modular descalers, lubricant unit, stress relieving device, as well as with a pay-off and horizontal 3 ton spooler

linear drive, linear gear, lifting gear, spindle drive, linear unit, linear guide, linear axis -Manufacturer: RK Rose Krieger, linear unit -Type: 70130100700 210792 /20 -Travel: 500 mm -Shaft: Ø 8 x 25 mm -Dimensions: Ø 30 x 725 mm -Weight: 1.7 kg

Reamer, twist drill, drill bit -Manufacturer: Werkö, twist drill Ø 66.0 mm -Recording: MK5 -Type: Two-cutter 66.0 x 630 HSS -on request: different sizes/quantities available from additional stock -Transport dimensions: Ø 66 x 780 mm -Weight: 10.6 kg

multi-spindle head, multi-spindle drilling head, drilling gear -Multi-spindle head: 5 spindles -Hole: Shaft Ø 20 x 25 mm -Drill holder: Ø 6 mm -Dimensions: see photos -Total dimensions: Ø 120/165 mm -Weight: 2.0 kg

Drill chuck, chuck, quick-release drill chuck, quick-release drill holder, quick-release drill chuck, CNC drill chuck -Drill chuck: SK40 quick-release drill chuck -Clamping range: 1-11 mm -Dimensions: Ø 58 x 197 mm -Weight: 1.3 kg

roller conveyor, conveyor track, roller conveyor belt, roller track -Roller conveyor: with conveyor belt, driven -Speed: 14 m/min -Conveyor belt: 2800 x 345 mm -Drive: SEW-Eurodrive 0.37 kW -Total dimensions: 3000/970/H320 mm -Weight: 176 kg

From bankruptcy: Gillardon GB 40 VE Year of construction 2012 No.4519-130-3913 Electromagnetic feed 0.1/0.16/0.25 on the cross lever at the touch of a button Speeds infinitely variable from 60-600rpm 2 step motor Work light Emergency stop button 200mm Pinol Stroke 350mm projection Table size 630x535mm--Clamping surface 400x500mm MK 4 Mount--with Röhm Quick Release Feeder 3-16mm Height of machine 2060mm--Weight about 480kg The machine runs very smoothly and precisely Table and columns with clear signs of wear Digital display of the speed without function + Vice Cekaba-Bon 230mm

Hopper and vibratory trough for Uhlmann UPS

Dryer / Centrifugal Dryer / Dry Cleaner Can be used for pre-shredded plastic waste (hard plastic, films), Throughput depending on the type of material approx. 0.5-2 t/h Drive power 30 kw

Schulz Roller Curve Conveyor with 90° Drive Manufacturer: Schulz Type: Roller Curve Conveyor Angle: 90° Roll width: 490 mm Nominal/external width (NB): 530 mm Inner radius (IR): 1100 mm Number of rolls: 22 pieces conical Rolls Ø conical: approx. 55 ... 80 mm Drive: SEW gear motor Conveying speed: 0.33 m/s 2 height-adjustable supports Total dimensions: approx. 1870 x 530 x 800 mm (LxWxH) More items in other sizes - new and used - can be found in our shop! International shipping costs on request!

roller conveyor, conveyor track, roller conveyor belt, roller track -Roller conveyor: with conveyor belt, driven -Speed: 11 m/min -Conveyor belt: 1375 x 400 mm -Drive: North 0.55 kW -Total dimensions: 1640/1060/H260 mm -Weight: 168 kg

Dryer / Centrifugal Dryer / Dry Cleaner Can be used for pre-shredded plastic waste (hard plastic, films), Throughput depending on the type of material approx. 0.5-2 t/h Drive power 30 kw

Core bit, step chisel, core bit for well construction, core drill, core drilling machine, diamond core bit, core bit for well drilling machine -Drill bit: 3 pieces drill holder plus 1 piece extension adapter -Dimensions: see photos -Delivery/Price: complete -Transport dimensions: 250/250/H280 mm -Weight: 27.3 kg

linear drive, linear gear, lifting gear, spindle drive -Linear drive: heavy duty, from an edge banding machine -Shaft: Ø 100 mm -Stroke: 116 mm / 6 mm/rev. -Quantity: 4 pieces available -Price:per piece -Dimensions: 775/180/H325 mm -Weight: 72 kg/piece

Offer 22090 Specifications: - Drilling capacity in steel ST 60 20 mm - Drilling spindle holder MK 2 - Drilling spindle stroke 120 mm - 4 drilling spindle speeds 400 - 2000 rpm - Projection 250 mm - Max. distance table - drilling spindle 720 mm - Table with 2 T-slots 440 x 360 mm - Height adjustable via rack with hand crank - Drive 380 V / 0.6 kW - Space requirement approx. W 550 x H 1900 x D 850 mm - Weight approx. 260 kg - with: - Drill chuck 3 - 12 mm

grinding drum, deflection drum, belt sander, belt grinder, drum sander -Manufacturer: KED Kurt Ehemann, grinding drum drum width 640 mm -Drum: Ø 340 mm -Record: Ø 77 x 445 mm -Quantity: 5x drum available -Price: per piece -Dimensions: Ø 340 x 640 mm -Weight: 82.0 kg/piece

We offer: a construction dryer Make: Wilms Model: Heating Cannon Heater Hot Air Blower Construction Dryer Nominal voltage/ current type: 220 V Fuel: Fuel oil Subject to changes and errors. Sale under exclusion of any warranty and liability for material defects.

Key data: 16 mm

Column Drill Speed 200- 3000 rpm 380 V 16 A Height adjustable 55 cm Expellers Drill chuck Albrecht 3 - 16 mm

Motor roller, roller motor, drum motor, belt sander, belt sander -Drum motor: Drive drum -Type: unfortunately without a type designation -Speed: 1400 rpm -Drum: Ø 215 mm -Drum length: 295 mm -Shaft: Mountings Ø 32x95 mm / Ø 32 x 65 mm -Overall dimensions: Ø 215 x 455 mm -Weight: 57 kg

Specifications: - Drilling capacity in steel ST 60 40 mm - Drilling capacity in steel ST 60 50 mm - Drilling spindle holder MK 4 - Drilling spindle stroke 180 mm - Drilling spindle speeds infinitely adjustable with countershaft - Level 1: 60 - 210 rpm - Level 2 210 - 765 rpm - Projection 330 mm - 3 feeds 0.1 - 0.2 - 0.3 rpm - Table with 2 T-slots 720 x 360 mm - Table height-adjustable via rack with hand crank - Max. distance table – drilling spindle approx. 780 mm - Max. distance between machined base plate and drilling spindle approx. 1250 mm - Coolant device -Lighting - Drive 400 V / 4 kW - Space requirement approx. W 720 x H 2050 x D 1150 mm - Weight approx. 500 kg

Cup hinge drilling machine -Stops: pneumatically controlled with program selection -Drilling pattern: see the pictures -Dimensions: 4000/1100/H1800 mm

Drills Grinding Machine DECKEL SOE Spindle speed: 4500 RPM Maxi bore of clamps: 17,5 mm Maxi sharpenable radius: 10 mm Maxi lateral displacement: 10 mm Angle adjustment: 45° Maxi displacement: 100 mm (see technical details) Delivred with 1 set of clamps + different diamond grinding wheels Voltage: 380 V Width: 600 mm Depth: 600 mm Total height: 1300 mm Weight: approx 150 kg

diamond core drilling machine -Drill stand -vacuum pump -Water pump reservoir -Core drill bits: Ø 15/20/3x 25/3x 28/32/40 mm

drilling machine, drilling machine, plate drilling machine, row drilling machine -Drilling machine: for Styrofoam or other materials, mobile -Drills: 2x Metabo SBEV 1100-2 S -Speed: 0-3100 rpm -Aluminium frame -Dimensions: see photos -Dimensions: 1200/870/H1210 mm -Weight: 108 kg

drilling table, drilling machine, drilling machine, plate drilling machine, row drilling machine -Drilling machine: for Styrofoam or other materials, mobile -Aluminum frame -Dimensions: see photos -Dimensions: 1180/870/H1210 mm -Weight: 103 kg

MIKRON Cutter Mod. VCP 1000 Machinable dimensions: square = 125x125 round 152 Machine visible in operation, in excellent condition.

Offer 24280 Specifications: - Drilling capacity in steel ST 60 32 mm - Drilling capacity in steel ST 60 40 mm - Drilling spindle holder MK 3 - Drilling spindle stroke 175 mm - Drilling spindle speeds infinitely adjustable 60 – 1600 rpm - 3 feeds 0.1; 0,16; 0.25 mm/rev - Projection 290 mm - Max distance drilling spindle – table / base plate 790 / 1210 mm - Table with 2 T-slots 570 x 475 mm - Height adjustable via rack with hand crank - Drive 400 V / 1.1 / 1.8 kW - Space requirement approx. W 600 x H 1950 x D 980 mm - Weight approx. 450 kg - with: - Emergency stop button -Lighting - Machine vise - 15 pieces HSS – drill bits 8 to 20 mm

for sale NEW - ALDURO Drilling-Milling Machine BFM 20V2 Drilling capacity up to 20 mm Spindle Holder MK 2 Head swivels +/- 90° Stepless speed adjustment 50 - 2250 rpm Cross table 500 x 180 mm Digital X-travel 195 mm Y-travel 140 mm Motor 1.1 kW, 230 V Machine without base (base), Can be purchased separately Weight approx. 113 kg further models and inquiries to FSA Maschinen AG

Erlo S-18 used desktop drill. With base. Drilling capacity: 18mm. Tapping capacity: M14. Table: 270x270mm. Cone: CM3. Speeds: 245-4000rpm. Motor: 1,4cv. CE. Year: 2005. Weight: 250Kgs.

Erlo TCA-60 used column drilling machine. Drilling capacity: 60mm. Cross table of 700mm. CE certificate for used machines

Iba-E35 used column drilling machine. Drilling capacity: 35mm. Table: 525x525mm. 9 speeds. (70-1406rpm). CE certificate for european used machines.

Dryer HERBOLD T 508 Rotor diameter: 500 mm Rotor width: 1200 mm kW: 30

Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet -Tool cabinet. Drawer cabinet, sturdy design -6 drawers: layout/height see photos -lockable: without key -Dimensions: 630/750/H930 mm -Weight: 88 kg

Reamer, twist drill, drill bit -Twist drill: Ø 36 mm -Recording: MK4 -on request: different sizes/quantities available from further stock -Dimensions: Ø 36 x 212 mm -Weight: 1 kg

Reamer, twist drill, drill bit -Twist drill: Ø 75 mm -Recording: MK5 -on request: different sizes/quantities available from further stock -Dimensions: Ø 75 x 600 mm -Weight: 8.6 kg

Dryer / Centrifugal Dryer / Dry Cleaner Can be used for pre-shredded plastic waste (hard plastic, films), Throughput depending on the type of material approx. 0.5-2 t/h Drive power 30 kw

Key data: 60 mm, 1600 mm

virgin Solid design, guide tracks on the boom hardened and ground, Stepless speed control, digital speed display Specifications: Drilling capacity max. 60 mm Threading up to M 46 Projection 350 - 1600 mm Vertical movement of the boom 585 mm Drilling head travel (horizontal) 1250 mm Quill stroke 325 mm Tool holder MK 5 Speed range (2) 38 - 275 / 275 - 2000 rpm Feed range (8) 0.06 - 1.00 mm/rev Distance spindle/cube table 165 - 750 mm Distance spindle/base plate 665 - 1250 mm Clamping surface base plate 1740 x 980 mm Cube table 750 x 500 x 500 mm incl. accessories: - Dice table - Drill chuck mandrel MK5 / B16 - Reducing sleeves MK5/4 MK4/3 MK3/2 - LED machine light - Coolant device - Digital speed display - Height-adjustable protective cover - Operating tool - Operating instructions, CE declaration of conformity

Radial Drilling GSP 49S22 Spindle: Ø 125 mm Cone: CM6 Spindle exit: 600 mm Spindle speed: from 17 to 1050 RPM Arm travel: 1800 mm Maxi height column travel: 1800 mm Column diameter: Ø 600 mm Total column height: 3000 mm Spindle speed: 11 kW Drilling/tapping function Mechanical locking of the column Hydraulic locking of the trolley Auto descent Delivered with one cube Cube dimensions: L 800 x W 560 x H 600 mm Table size: L 3300 x W 1400 x H 320 mm Voltage: 380 V Weight: 12 T

Multi-spindle head, multi-spindle drilling head, drilling gear -Manufacturer: Romai, multi-spindle head 2 spindles -Type SMSK 2/23 -Drilling tool holder: MK3 -min. distance drill bit: mm -Dimensions: Ø 220 x 455 mm -Weight: 27 kg