dr hochstrate used for sale

Prismatic column drill. Drilling capacity: 60mm. Table: 700x600mm. Vertical travel: 800mm. Taper Morse 4. Speeds: 9. (50-1.084) Motor power: 7,5cv.

Drilling capacity in steel: 32 mm Drilling capacity in cast: 40 mm Cutter head milling max.: 80 mm Projection: 220 mm Spindle speed: (12) 75-3200 RPM Spindle retainer: MK 4 Quill stroke: 125 mm Table size: 800 x 240 mm Travel (x / y): 555 / 225 mm Milling head swiveling: - 90 ° to + 90 ° Distance from spindle / table: 60-485 mm Head height: 425 mm T - slot size: 14 mm S1 motor power output 100%: 1,1 / 1,5 kW (400 V) Motor power S6 40%: 1.5 / 2.2 kW (400 V) Machine dimensions (W x D x H) : 1140 x 770 x 1500 mm Approximate weight: 287 kg without stand Features: Quick and easy change of speed using the gear selector switch Versatile application possibilities such as drilling, milling, thread cutting, … High running smoothness by polished, running in an oil bath gear gears Right - and the link run device for thread cutting Quill adjustment by means of ...

Drying Cabinet Manufacturer: Hüttlin Model: Hüttlintrockenschrank Serial No.: T 1141 Material: 1.4301 Dimensions outside: Depth: 1.200 mm Width: 2.100 mm Height: 2.200 mm Dimensions inside: Depth: 1.000 mm Width: 1.400 mm Height: 1.900 mm Housing, base frame and product area completely made of stainless steel!

; ready for operation

Alzmetall AB4SJ Tool holder MK4 automatic feed with 3 feed speeds 2 shoot stages and infinitely variable speed control right left barrel, thread cutting device Cooling agent device in the foot Round table with holes without rev counter Machine hood modern made of plastic with cracks and loechers Speed: 80-710 rpm Table diameter: 450 mm Max distance from spindle to foot: 1200 mm Extension to center spindle: 170 mm Machine hoe approx. 200 cm Bt323s8 SPECIAL PRICE due to visually poor condition according to photos, technically usable condition, the drill is not locked at the shaft drill spindle tool holder in the rotational motion (see photos). If the drill is not firmly in the drill spindle, it rotates through. Special price

Working length: 3.200 mm Machine is equipped with: -3 drilling units from below with 3 spindle-head - 2 holders from above -1 pressure cylinder on the side The control was by the customer through a control, serial: Siemens,. newer built; replaced.

Prismatic column drill. Ready for automatic drill of flanges, rounds... Drilling capacity: 70mm. Spindle pneumatic work cycle. Indexing table. Chip conveyor. Working area guarding. Year: 1998.

According to the description below

Standard ALB ear performance: 30 mm Thread cutting performance: M 20 (option) Thread: M 12 Spindle: MK 3 or SK 30 (option) Quill stroke: 100 mm Longitudinal / cross travel: 350/160 mm Distance spindle/cross table: 80 to 450 mm Table area: 600 x 240 mm Column diameter: 110 mm Total height: Max 1,920 mm Weight: 340 kg Motor pole shift bar: 0.8/1.5 kW Spindle speeds, continuous, selectable: 10 spindle speeds: 80-1,400 rpm 10 spindle speeds: 120-2,160 rpm 10 spindle speeds: 160-2,800 RPM Facilities: A versatile, accurate and handy drilling milling machine. The quiet-running drive and a perfect clamping of Quill guarantee good surfaces when milling. The headstock can be swung out. The stage is precise and precisely adjustable. Pitch 0.05 mm. clamping device for both axes. Full motor protection. Machine incl. Cabinet.

Mobile double drum dryer with many setting possibilities. Can be used in a 20 ' container be fitted and used as mobile plant. Wolf heating unit WLE-S can be converted at any time also to gas operation 140KW, oil burner Elko Kloeckner, type EK 02. Fan unit with 12,000 m³/h, 5,5KW, 955 1/min drying temperature up to 220 ° C depending on the drying goods. With heavy dust separator and air filter. Air to air heat exchanger for indirect heating - no exhaust in the drying air!

Controls: Heidenhain TNC 360 (1992) Table size: 1,000 x 1,000 mm Table size with extension: 1,345 x 1,000 mm Table load max.: 2,000 kg Distance between the s distance Spindle to table top: 0 - 1,100 mm Travel distances: X 1400 mm Y 900 mm Z 850 mm W 370 mm spindle holder: MK 5 spindle drive power: 6 kW spindle speeds: 30 - 1,500 rpm Drilling spindle diameter: 82 mm drill diameter: 2 - 70 mm Drilling tools Diameter: 17 - 450 mm Drilling capacity to full ST60: 45 mm Drilling capacity to full GG: 70 mm Zubehoer: drills; tools; usw. machine was rebuilt in 1992 and !; Very good

Technical data: Kreuzmayr Obsttrockenschrank OTS 22, 22 m² surface dry, electrically heated, with temperature and humidity control power 7.5 of kW, full stainless steel for drying fruits, vegetables, meat,... Condition: new (Errors and omissions in the technical data, information and prices and subject to prior sale.)

Make : Wolf Built: 1993 Dimensions: 1.3 m x 1.0 m x 2.6 m (approx. WxLxH) Heating unit: 140 kW Burner : Gas burner Dry temperature: max. 80 degrees C Circulating air unit: 12,000 m3/h; 5.5 kW; 1100 rpm Sales price: € 2,950,- net, from stock Herzogenaurach We have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please ask.

1 Items various drill bushes

Make : Wolf Type: WLE-S-180 Built: 1993 Dimensions: 1.3 m x 2.2 m x 2.6 m (approx. WxLxH) Heating unit: 209 kW Burner : Gas burner Dry temperature: max. 80 degrees C Circulating air unit: 14,000 m3/h; 7.5 kW; 1435 rpm Location : Camp Herzogenaurach Sales price: € 2,990,- net, from location This plant is already on sale, similar we have in stock. We have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please contact us, tel. 0171-9508841.

Drilling capacity in steel/GG: 23 mm spindle retainer: 2 MK projection: 300 mm table size: 300 x 300 mm Quill stroke: 100 mm spindle speeds: 190-1500 rpm drive motor: 380 V, 0.5/0.75 kW space: 410 x 670 x 1950 mm weight: 180 kg

various accessories

Drilling capacity in steel/GG: 50/60 mm spindle retainer: 5 MK projection: 400 mm table size: 700 x 600 mm Quill stroke: 275 mm spindle speeds: 32-1030 rpm feeds: 4: 0.1 ? 0.4 mm drive motor: 380 V, 2.2/3.7 kW space: 700 x 1200 x 2700 mm weight: 1240 kg

Kramatorsk KJ 1910 10-meter boring depth - Heavy duty: 25-ton workpiece >>> NOTE: MACHINE IS IN OUR WAREHOUSE IN ITALY < < < Heavy duty: Max. work-piece weight 25 tons Spindle motor kW 85 Counter rotation motor 90kW Spindle hole diameter mm 700 Max. boring diameter, mm 600 Center height over the bed, mm 670 Max. work piece external diameter, mm 1300 Work piece length range on one-sided machining, mm 1000...10000 Work piece diameter range, mm: - in chuck of faceplate 200...1100 - in open rest 400...900 - in closed rest 200...630 - in round rest 250...550 Spindle speeds range, rpm 2...200 Machine overall dimensions, approx mtrs 31 x 3 x 2,3 Machine weight, kg 90000 (approx)

Spindle: MK 3 Dauerbohrleistung: 25 mm standard ALB ear performance: 30 mm of thread cutting performance: M 20 depth: 125 mm projection: distance 260 mm spindle/table: 90 to 840 mm table surface: 500 x 365 mm column diameter: 110 mm overall height: 1,855 mm weight: 250 kg motor pole shift bar: 0.8/1.5 kW spindle speeds continuously variable range: 80 - 1440 min-1 range: 180 - 3,200 RPM digital display for speed as standard.

Dauerbohrleistung in St 60: 15 mm standard ALB ear performance: 18 mm thread cutting performance: M 8 spindle: MK 2 drilling depth: 80 mm projection: 180 mm spindle speeds of stepless 200 - 4,000 rpm spindle speeds threads 200-700 rpm distance spindle/table: up to 380 mm tabletop: 250 x 220 mm column diameter: 65 mm total height: 910 mm weight: 80 kg three-phase motor frequency controlled: 1,1 kW with full thread cutting device and programmable digital display

Dauerbohrleistung in St 60: 18 mm standard ALB ear performance: 20 mm thread cutting performance: M 12 spindle: MK 2 drilling depth: 100 mm projection: 225 mm from spindle/table: 55 up 880 mm table area: 450 x 315 mm column diameter: 90 mm overall height: 1,745 mm weight: 170 kg frequency-controlled three-phase motor: 1.5 kW spindle speeds continuously variable range: 100 - 2,000 rpm range: 200 - 4,000 min-1 digital display for speed as standard.

Vibration machine for drying and sieving of sand. The machine consists of a welded construction mounted on conveyor elements, with 2 Electric Vibrators as drive. An electric heater with built-in blower is located at the end of the conveyor belt. Below the conveyor trough a sieve box is mounted in the area of the sand outlet. The dynamic forces that are emitted from the machine to the ground only about 100 N amount due the shock mount on the spring elements. The amplitude and therefore the flow rate can be set by adjusting the unbalances on the motors. The machine is due to the simple design nearly stör - and maintenance-free. The static frequency converter has a range of 10 to 32 Hz Length: 3.5 m Width: 1.2 m Height: 1.4 m Weight: 220kg

Dauerbohrleistung in St 60: 35 mm standard ALB ear power: 40 mm thread cutting performance: M 30 spindle: MK 4 feed adjustable: 20-400 mm / min drilling depth programmable: 175 mm projection: 300 mm spindle/table: 70-830 mm surface: 550 x 400 mm column diameter: 120 mm total height: 1,980 mm weight: 450 kg motor pole shift bar: 1.5 / 3.0 kW spindle speeds continuously variable range: 120-2,500 rpm spindle speeds stepless area B: 60-1,200 RPM

Recon Part number: 1216-3235 Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us

RECON Part number: 1230 2236 Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us

Driven tool for Mazak Integrex Item description see nameplate. Good condition fully functional can be visited on site and tried out. Shipping abroad. Visit: Basically I would like to point out that the article may be viewed and tested under power to exclude misunderstandings, like before you buy. Please ask questions before you purchase to avoid ambiguity. For general questions or an appointment for a visit I am at the below telephone number, available. Errors in the description and intermediate sale is reserved. Shipping with freight forwarding.

Driven tool for Mazak Integrex Item description see nameplate. Good condition fully functional can be visited on site and tried out. Shipping abroad. Visit: Basically I would like to point out that the article may be viewed and tested under power to exclude misunderstandings, like before you buy. Please ask questions before you purchase to avoid ambiguity. For general questions or an appointment for a visit I am at the below telephone number, available. Errors in the description and intermediate sale is reserved. Shipping with freight forwarding.

Driven tool for Mazak Integrex Item description see nameplate. Good condition fully functional can be visited on site and tried out. Shipping abroad. Visit: Basically I would like to point out that the article may be viewed and tested under power to exclude misunderstandings, like before you buy. Please ask questions before you purchase to avoid ambiguity. For general questions or an appointment for a visit I am at the below telephone number, available. Errors in the description and intermediate sale is reserved. Shipping with freight forwarding.

Driven tool for Mazak Integrex Item description see nameplate. Good condition fully functional can be visited on site and tried out. Shipping abroad. Visit: Basically I would like to point out that the article may be viewed and tested under power to exclude misunderstandings, like before you buy. Please ask questions before you purchase to avoid ambiguity. For general questions or an appointment for a visit I am at the below telephone number, available. Errors in the description and intermediate sale is reserved. Shipping with freight forwarding.

for 60-80 kg batches, depending on the product Copper boilers Diameter 950 mm, depth approx. 550 mm Opening diameter 600 mm, electrically tiltable, already checked, fully in order. Dimensions: 1270 x 1100 x 1600 mm high Weight approx.300 kg

Precise, smooth-rolling standard drill, high accuracy and quality. drilling table adjustable rack and the swiveling column. Full motor protection, star-shaped knob. Mains connection 230 V. Dauerbohrleistung in St 60: 15 mm Standard ALB ear power: 18 mm Infinitely variable spindle speeds: 200 - 4,000 min-1 Spindle: MK 2 Drilling depth: 80 mm Projection: 180 mm Distance from spindle/table top: up to 380 mm Tabletop: 250 x 220 mm Column diameter: 65 mm Total height: 910 mm Weight: 80 kg Three-phase motor frequency controlled: 1,1 kW Facilities: -Turn switch clockwise / counterclockwise to thread cutting - full motor protection -Star handle In stock, available now

High quality - Low price! Radial drill MAS VR5A Arm 1600mm Max dia in steel 50mm Max dia in cast iron 60mm Max threading in steel M30 Max threading in cast iron M42 MT 4 Spindelmotor 4 kW - 28 - 2500 RPM Distance table-spindle nose 1600 mm Clamiping area 1800 x 1000 Weight 3,7 Ton

HIGH PRODUCTION BABCOCK ROLLERS DRYER

Deep hole boring machine - heavy duty deep hole boring machine Kramatorsk (Russia) KJ 1910 Year of manufacture 1986 Maximum boring diameter, mm 600 Maximum use of lenght mm 10000 (10 meters) Max 25 ton Machine in our warehouse in Northern Italy Center height over the bed, mm 670 Maximum work piece external diameter, mm 1300 Work piece length range on one-sided machining, mm 1000.. 10000 Work piece diameter range, mm: -in chuck of faceplate 200th.. 1100 -in open rest 400... 900 -in closed rest 200... 630 -in round rest 250... 550 Maximum work piece weight 25000 kg Range, 2 200 rpm spindle speeds Spindle diameter hole mm 700, Main motor power, kW 85 Counter rotation motor is 95kW Machine overall dimensions, mm 25550 x 3000 x 2290 Machine weight, kg 83000 Mimu machine tools (Italy) machine tools

Technical data: Drive motors/ motors Number: 6 pieces available Manufacturer: Spörk Condition: good (used) Power: see type plate/ motor data <b>Tailor-made solutions for your intralogistics</b> We are your competent contact for roller conveyors, belt conveyors, slanted rollers or telescopic phones for loading and unloading your goods! We are happy to prepare your individual offer or advise you on the conception or assembly questions. Simply let us know your needs and local conditions. Take advantage of our many years of experience and our excellent network of experts. We have already successfully implemented projects for companies in a wide range of industries, such as logistics, the pharmaceutical industry, the craft sector and the electronics industry. Together, we will work out ways to optimize your flow and material flow cost-effectively and susta ...

Drawing blades serve as tools for the fine removal of chips, for removing old paint layers and for cleaning contaminated surfaces. Pull blades are usually not functional when purchased, but only a piece of steel sheet. In order to function, a fine ridge must first be sanded. We offer fully functional drawing blades of 0.4 mm and 0.5 mm Swedish steel for new purchases. If necessary, we will gladly grind your "used" or "new" drawing blades and let them come back to you functionally. Contact us. We would be happy to provide you with a new range of re-energised blades - ground or unground and/or a grinding offer. We would be happy to provide you with further information regarding drawing blades.

Rotary vane vacuum & compressor - running dry Manufacturer: Becker Type: DVT 3.140 and DVT 3.100 Motor: 400V DS Suction power: 100 - 140m3/h Compression pressure/ vacuum: optional +-0.5bar / +-1.5 barStatus: Preliminary

Rotary vane vacuum compressor - running dry Manufacturer: Becker Type: KVT 3,100 Motor: 400V Status: Generalueberholt and repainted Performance: 12 months; ready for use

; ready for operation

Working width: 4800 mm N. of heated sections: 22 N of decks: 6 complete with automatic loading and un loding systems