dr hochstrate used for sale

Rotary actuator, pneumatic cylinder, rotary vane actuator, rotary module, pneumatic rotary actuator, rotary cylinder -Manufacturer: Festo, Rotary actuator type DRRD-16-180-FH-Y9A 1644389 -Rotation angle: 180° -Quantity: 1 available -Dimensions: 140/60/H30 mm -Weight: 0.6 kg

Reamer, twist drill, drill bit, spiral countersink, three-flute, twist drill -Three-knife -Diameter: 17.75 mm -Usable length: 150 mm -Recording: MK2 -Type: HSSE Quantity: 19 pieces -Sale: only complete set -Weight: 6 kg

Reamer, twist drill, drill bit, spiral countersink, three-flute, twist drill -Three-knife -Diameter: 16.8 mm -Usable length: 120 mm -Recording: MK2 Type: HSS -Quantity: 24 pieces -Sale: only complete set -Weight: 7.5 kg

Stock # U2471-1 Used horizontal vacuum paddle dryer by Drais (DE) model TR100. Contact parts designed in duplex stainless steel (AISI 1.4462). Drying chamber has internal dimensions: diameter 500 mm x length 595 mm. Total volume of chamber about 117 l. Drying chamber is designed for work on pressure range from -0,98 bar / 63 bar. Test pressure - 83,9 bar. Working temperature up to 220 C. Side walls and front door are jacketed. Total volume of jacket 24 l, working pressure 5 bar, temperature up to 220 C. Chamber doors are mounted on moveable arm and are bolted on 18 clamps. Inside drying chamber there is single shaft with 4 welded ploughs. Shaft is belt driven by gearbox and el motor 18,5 kW, 1470 rpm, 400 V, 50 Hz in Ex design (EExdeIICT4). Top feeding inlet with diameter 200 mm, central bottom discharge with manually operated valve with diameter 100 mm. Machine is mounted on carbon s ...

Vacuum Mixer/Dryer/Inclined Bucket Mixer Manufacturer: Drais Type TR 50 EX protected with chopper The mixing plant was opened in November 2008 Renewed by the Lödige company. Material stainless steel 1.4571 / stainless steel 1.4571 Electr. Connected load Drive Vibrator 10.5 kW Adjustable, 31.5 – 380 rpm 1445/2905 rpm Product room printing Product room Temp. Product space Content Double coat Double Jacket Content With head capacitor, Double-acting mechanical seal -1/+6 bar 300 °C 56.5 liters 6 bar 7 litres Weight approx. 2000 kg Length x width x height approx. 2200 mm x 1620 mm x 2065 mm Machine is in good condition ! From plant extraction, pilot plant equipment Installation and operating instructions, as well as electrical diagram and drawings available.

Pressure: 14 bar

2x Wood drying chamber dry chamber energy saving system 606 economy It is run until 2018. The heating system can be purchased in addition - wood chips with 400 KW heating capacity and boiler , etc. - Same year of construction. The solar system/panels on top can also be purchased. Find more here - .ucymachines/ Contact us at - sales@ucymachines

Pressure: 16 bar

Self-propelled Multifunctional Amphibious dredging/digging equipment Multifunctional Amphibious PRIENAI is new SAND PUMS and floating pipelines These dredging/digging equipment can also be dismantled into separate sections and transportet by land. The equipment can work both on land and in water. SELF-PROPELLED MULTIFUNCTIONAL AMPHIBIOUS DREDGING/DIGGING EQUIPMENT 1. Self-propelled Multifunctional Amphibious dredging/digging equipment: 2.1. Self-propelled Multifunctional Amphibious 1 2.2. Self-propelled Multifunctional Amphibious 2 2. Additional equipment for Multifunctional Amphibious dredging/digging equipment: 2.1. Sand pump 2.2. Bucket 2.3. Grab 2.4. The self-floating hose Equipment Date of Built – 2021/2022 Certificated By RINA. 1. SELF-PROPELLED MULTIFUNCTIONAL AMPHIBIOUS DREDGING/DIGGING EQUIPMENT Basic descriptions: Overall Length – 12,9 m. Moulded Breadt ...

Self-propelled Multifunctional Amphibious dredging/digging equipment Multifunctional Amphibious ALYTUS was operated for up to 400 hours – (Registered in the Lithuanian register) SAND PUMS and floating pipelines (NOT included in price) These dredging/digging equipment can also be dismantled into separate sections and transportet by land. The equipment can work both on land and in water. SELF-PROPELLED MULTIFUNCTIONAL AMPHIBIOUS DREDGING/DIGGING EQUIPMENT 1. Self-propelled Multifunctional Amphibious dredging/digging equipment: 2.1. Self-propelled Multifunctional Amphibious 1 2.2. Self-propelled Multifunctional Amphibious 2 2. Additional equipment for Multifunctional Amphibious dredging/digging equipment: 2.1. Sand pump 2.2. Bucket 2.3. Grab 2.4. The self-floating hose Equipment Date of Built – 2021/2022 Certificated By RINA. 1. SELF-PROPELLED MULTIFUNCTIONAL AMPHIBIOUS ...

Standard equipment: Tapping device Control panel with OLED display Robust, high-quality drill head hood with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drilling depth stop Stepless speed control via central rotary knob EMERGENCY STOP push button Thermal overload protection Spindle stop Drilling protection with electr. Hedge Connection cable with Schuko plug 3-year warranty for single-shift operation Continuous/normal drilling capacity (mm) 6/8 (in E335/ST60) Tapping capacity (pitch dependent) M5 Spindle B12 Drilling depth (mm) 60 Projection (mm) 220 Column diameter (mm) 70 Usable work surface (W x L) (mm) 300 x 250 T-slot size (arm), spacing (mm), dimension width (mm) Cross grooves, number 2, 14/26 Drill head height adjustment by hand Feed (mm/revolution) by hand Drilling depth stop ring (positive fit) Drilling depth indicator digi ...

ID3860 Wellco-Drill WD90 year/Baujahr 2007 approx. 1400 hours/hours Crawler-mounted drilling rig, very good condition, 6t pullback force, 3-stage flush pump, engine: Perkins diesel engine (131 kW), drilling method: flush drilling, achievable drilling depth: approx. 180 meters, powerful and compact drilling rig; scope of delivery includes: WellcoDrill WD90 drilling rig, 34 x 3m drill rods, suction hose, suction strainer. Drilling rig on crawler chassis, very good condition, 6t retraction force, 3 stage mud pump, engine: Perkins diesel engine (131 KW), drilling method: flush drilling, achievable drilling depth: approx. 180 meters, powerful and compact drilling rig, scope of delivery includes: WellcoDrill WD90 drilling rig, 34x 3m drill pipe, suction hose, suction basket

Dismantled agitator in new condition.

Forklift battery charger, industrial charger, forklift battery charger, industrial charger, silicon rectifier, charger for scrubber-dryer -Manufacturer: Gansow, charger minitron II E 24/17 Dryfit-Bloc -Input voltage: 230 V 50 Hz -Power: 24 V / 17 A -Dimensions: 345/210/H230 mm -Weight: 12 kg

Manufacturer: Purete Purete LED Easy Dry PRT-U1513 , Type: PRT-U1113X, Work piece width min-max mm: 1320, Min.-max. workpiece length in mm: 300, Min.-max. workpiece height in mm: 2 - 80, Number of lamps: 1, kW power 1 lamp: 3,78, Reflektor von oben abnehmbar: yes, Gesamtlänge UV Modul mm: no, Adjustable: 38,7, Elektronische Leistungregelung: 1.200, Leistung Abluftventilator kw: 1,2, Feeding speed m/min: yes, Damper register - items: 5, Heating battery: 1.200x1.850x1.750,

Manufacturer: Gannomat, Type: Super Drill, Control: hand, Drilling engine kW: 2,2, Working range max mm: 120, Drilling beam swivel-mounted: yes, Lochraster: 32, Spindelanzahl 1: 19, Swivel pneumatically 90-45°: yes, Work piece support: yes, Work stations: 1, Foot switch: yes, Max. drilling depth in mm: 80, Max. drilling height in mm: 80,

Plastic Dryer - Wittmann Drymax D60-150-M (2 pcs.) Year of Make: 2011 Description: Dryer with 2 molecular sieves, 1-silo Silo capacities: 150 l Sieves work alternately, during the drying process, one sieve works and the second sieve regenerates Hermetically insulated silo Dryer with Wittmann Feedmax S3-40 suction conveyor All offered peripherals are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Plastic Dryer - Wittmann Drymax Primus E60-150-M (2 pcs.) Year of Make: 2016 Description: Dryer with 2 molecular sieves, 1-silo Silo capacities: 150 l Sieves work alternately, during the drying process, one sieve works and the second sieve regenerates Hermetically insulated silo Dryer with Wittmann Feedmax S3-Net suction conveyor Price: On request All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź.

AIR DRYING TUNNEL, for strands, dimensions 2.000 x 300 mm. (or bespoke), blower on bottom with 2 conveyors which send air through slits, constructed in AISI304 stainless steel

CENTRIFUGAL DRYER for pellets (to go with an existing pelletizer), for a 350/400 kg/h capacity of PE PP ABS PS PC flakes, made of sturdy AISI304 stainless steel with vertical axis, driven by a 2.2 kW 3 Ph.asynchronous motor,, complete with soundproofed discharge cyclone, stainless steel tank for water recovery and recycling, 1.1 kW water ump,, equipped with drainage for overflowing, HEAT EXCHANGER GROUP, made of painted carbon steel, internal copper tube bundle, with removable head to facilitate cleaning, fixed to the tank using brackets, float with water replenishment valve, Electrical board of machine wiring, Users manual, CE compliance, installed power - used power in work: about 60-65% : 2.2, conditions: new machine, type: for granulate - this machine goes after the pelletizer, capacity: 300-450 kg/h

Plastic Dryer - Wittmann Drymax Primus E60-150-M (2 pcs.) Year of Make: 2016 Location: Lodz, Poland Description: Dryer with 2 molecular sieves, 1-silo Silo capacities: 150 l Sieves work alternately, during the drying process, one sieve works and the second sieve regenerates Hermetically insulated silo Dryer with Wittmann Feedmax S3-Net suction conveyor Price: On request

Plastic Dryer - Wittmann Drymax D60-150-M (2 pcs.) Year of Make: 2011 Location: Lodz, Poland Description: Dryer with 2 molecular sieves, 1-silo Silo capacities: 150 l Sieves work alternately, during the drying process, one sieve works and the second sieve regenerates Hermetically insulated silo Dryer with Wittmann Feedmax S3-40 suction conveyor Price: On request

# HP Jet Fusion 540 3D-Drucker (2019) – MJF-System mit geringer Laufzeit Gebrauchter HP Jet Fusion 540 aus 2019, ursprünglich für R&D-Anwendungen beschafft. Das MJF-System wurde durchschnittlich einmal wöchentlich für Prototypenentwicklung eingesetzt – deutlich unter industrieller Vollauslastung. Entsprechend sehr guter Erhaltungszustand. Technische Eignung: Kleine bis mittlere Losgrößen Funktionsteile und Prototyping Anwendungen mit Anforderungen an Detailgenauigkeit und Maßhaltigkeit Materialeffizienz: Bis zu 80 % des Pulvers wiederverwendbar. Automatische Vermischung von Alt- und Neumaterial erfolgt maschinenseitig, was Materialkosten reduziert. Wartungsstatus: Professionelle Wartung bis Ende 2024 durchgeführt Alle Komponenten original HP (inkl. Druckköpfe) Keine Produktionsaufträge in 2025 Hinweis: Gasdruckfedern der Bauraumtür verschlissen, Austausch erforderlich Lief ...

Manufacturer: ECOMATION Model: ECOBIO V Vacuum Dryer Year of Manufacture: 2017 Hours Used: Approx. 2500 h, vacuum pump

HP Jet Fusion 580 – MJF-Farbdrucker für industrielle Anwendungen Gebrauchter HP Jet Fusion 580 aus 2019, Standort Budapest. Die Maschine ist vollständig funktionsfähig, regelmäßig gewartet und sofort einsatzbereit. Technologie und Einsatzbereich MJF-Technologie (Multi Jet Fusion) mit Vollfarbdruck (CMYK). Geeignet für Prototyping, Produktentwicklung, Design-Visualisierung und Kleinserienfertigung. Besonders relevant für Anwendungen, die farbige Funktionsbauteile mit hoher mechanischer Belastbarkeit erfordern. Technische Merkmale Farbiger 3D-Druck in CMYK für anschauliche Prototypen und Musterbauteile Hohe Detailauflösung für komplexe Geometrien und feine Strukturen Kurze Produktionszeiten durch MJF-Prozess Touchscreen-Bedienoberfläche Automatisierte Material- und Reinigungszyklen Zustand und Service Sehr guter Zustand. Installationsservice, Inbetriebnahme und Einweisung auf  ...

bore capacity in steel (diameter): 45 mm quill stroke: 125 mm : 560 mm : 230 mm table surface area: 800 x 240 mm spindle turning speed range: 75 - 3200 U/min max. milling cutter diameter: 80 mm spindle taper: ISO 30 max. distance between table and spindle-nose: 460 mm throat: 230 mm connected load frequency: 400 V total power requirement: 1,5 kW weight of the machine ca.: 580 Kg dimensions of the machine ca.: 1,2 x 1,0 x 2,1 m Equipment: All axes with 3-digital display. Quill travel has separate digit display. Automatic feed in X-axis and quill. Motorized Z-axis. tapping device. coolant system. machine base. Collet set, SK tool holder. Further machine accessories in box. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

New slewing ring suitable for Volvo ECR88 mini excavator

Offered is a rapid radial/column drilling machine. Drilling capacity: up to approx. Ø50mm. Speed range: 58-1275rpm. Thread cutting device: available, outreach: 920mm, machine lamp: available, baseplate/table size X/Y: approx. 1100mm/400mm, T-slots: 2 at the rear left, motor power: approx. 1.5kW without coolant system, machine weight: approx. 1200kg. Inspection under power by arrangement possible.

Amut Vertical centrifugal dryer under refurbishing, mm.400 rotor diameter,, length mm.1.900 mm.,, 120 mm.long paddles on the whole length,, AISI 304 steel basket from diam.mm.650,, height : 1.975 mm., mm.3,0 holes,, self-cleaning system through water sprays., Rolling type bearings., 55 kw, 1.550 tpm engine., About 1.000 kg./hr. with film and depending on material and water content (less with LLDPE, more with rigid plastics), Construction year 1998., Machine is offered totally reconditioned, feeding auger and discharging cyclon are included in this offer, See how a similar machine was refurbished, [here](.germanplast/pages/photo-gallery#&gid=1&pid=2), installed power - used power in work: about 60-65% : 55 kW, availability: 5 weeks ca, options available: loading auger à discharging cyclon, capacity: 1.000 kg/h depending on material and water %, conditions: reconditioned with warranty, ty ...

Manufacturer: ESC Model: Continuous Dryer Perfecton S with UV Year of Manufacture: 2020 Technical Specifications Heating Chamber 80°C - Galvanized nozzle plate - Process fan: TRZ 250-3 - Indirect air intake from process room - Recirculated air volume: 3,400 m³/h at 510 Pa - RRH heating register: 18 kW at max. 80°C - Drive motor: 2.2 kW / B3 / 1,410 rpm / insulation class F - Length: 2,000 mm Cooling Chamber - Process fan: TRE 250-3 - Supply and exhaust air volume: 3,400 m³/h at 800 Pa - Stainless steel drip tray for process fan - Drive motor: 2.2 kW / B3 / 1,500 rpm / insulation class F - Without cooling register and refrigeration unit - Length: 2,000 mm Discharge Element - Steel drive roller with rubber coating - Mounting for belt drive - Length: 500 mm Construction Details - All hoods and cladding panels made of electrolytically galvanized steel sheet - Heating chamber h ...

Manufacturer: ESC Model: Continuous Dryer Perfecton S Year of Manufacture: 2021 Technical Specifications Heating Chamber 80°C - Galvanized nozzle plate - Process fan TRZ 250-3 - Indirect air intake from process room - Air circulation volume: 3,400 m³/h at 510 Pa - Electric heating register: 18 kW at max. 80°C - Drive motor: 2.2 kW / B3 / 1,410 rpm / ISO F - Length: 2,000 mm Cooling Chamber - Process fan TRE 250-3 - Supply and exhaust air volume: 3,400 m³/h at 800 Pa - Stainless steel drip tray for process fan - Drive motor: 2.2 kW / B3 / 1,500 rpm / ISO F - Without cooling register and chiller - Length: 2,000 mm Discharge Element - Rubber-coated steel drive roller - Mounting for belt drive - Length: 500 mm General Construction - All hoods and cladding panels made of electro-galvanized steel sheet - Heating chamber hoods are insulated DIMENSIONS - Belt width: 1,700 mm - B ...

We are offering for sale 3 Drying Chambers manufactured by Trockenkammer Lauber /Mühlböck Industrial drying chamber system with 3 chambers. Each chamber has a gross stack volume of 162 m³. Hot water heating with 780 kW heating capacity per chamber, operating at 95 °C flow temperature. Water flow rate 45 m³/h, DN100 connections. Equipped with circulation and exhaust/fresh air fans. Suitable for high-capacity industrial drying applications.. Chamber 1 Manufacturer: Trockenkammer Lauber /Mühlböck Wood Drying System Model: ZLSM 2120-3120-1252-11-0606-5.0 Year of Manufacture: 2012 Type of Machine : Wood Drying System Heating capacity : 410 kW Maximum flow temperature : 95 °C Water flow rate : 24 m³/h Pressure loss : 3 mWS Electrical supply voltage: 230 / 400 V Installed electrical power : 28 kW Fans : 7 units, 3.0 kW each Chamber 2 Manufacturer: Trockenkammer Lauber /M ...

2 units and 1 large drying cabin made of stainless steel incl. piping, for gentle drying of food (herbs, tea, wheatgrass), low-temperature drying. Drying below 40°C, only permitted for indoor use. Very solidly built. Dimensions: Aggregates - 1.95 x 1.25 x 2.00 m, Drying cabin: 7.40 x 2.67 x 2.50 m, Stainless steel: 1.4301 Aggregate 1 : Built in 2012, Aggregate 2 : Built in 2014, Drying cab: Built in 2015. The Blue Evolution XL steam cleaning device from Beam can also be purchased. We will be happy to send you the data sheet. Price VB

compressor air refrigeration dryer air dryer Brand: KAESER TE141 Year of manufacture: 2013 Motor voltage Pgebmsyfpbtsrc H Dlsg 400V/50Hz 3 phases 4.5 a/min Max. pressure: 16.00 bar Delivery capacity 14.32 m3/min Operating pressure max: 16bar Refrigerant: R134A 2.1kg Air-cooled dryer Refrigeration dryer Connection: Compressed air G2 (internal thread) Connection: Condensate drain: DN10 Dimensions: Length: 1530mm Width: 1060mm Height: 1513mm Weight: 660

PP-Drinking Cup Mold for ILLIG RDM75Kc, manufactured by TERMOSTAMPI, age 2022 with Inmold Forming and Trimmimg, for PP-Cups Ø98 mm dia. for the ILLIG RDM 75Kc, consists of:, 24 cavities (6 x 4 arrangement), complete with Trimming Knives, Cavity Inserts, Ejectors, Down Holders., and 4 series of inserts for the following PP drinking cups:-, 24 oz, 20 oz, 16 oz, 12/ 14 oz, Complete with Stacker Parts for the ILLIG PH75 counter/ stacker

Unused alubit grinding balls (alumina ceramic) designed for dry grinding (batch and continuous operation), available in the following sizes and quantities: 1 1/4'' (32 mm) [960 kg]; 1 3/4'' (45 mm) [1,580 kg]; 1 1/2'' (38 mm) [940 kg]; 2'' (50 mm) [410 kg]; 2 1/2'' (64 mm) [580 kg]. All balls made in Italy, packed in 25 kg bags.

General SKU224S098 MakeNiro Atomizer (DK) TypeVFI/H/A 2,5 No.43164 Year of constructionUnknown LocationBarneveld Main Features MaterialStainless steel Motor2.2 KW Surface1.96 m2 Specified Features - Fluid bed dryer continuous Continuous fluidbed dryercheck Surface1.96 m2 Bed sizes700x2800mm Product outlet200x600mm Air inletdia. 300mm Air outletdia. 350mm Drive with excentriccheck Motor2.2 kW 220-240/380-420 Volt MaterialStainless steel General Mounted on mild steel framecheck Floorspace4,7x1,6 M Total height3,2 M Weight1800 KgFluid bed dryers continuousNiro AtomizerDryers > Fluid bed dryers continuousBrand > Niro Atomizer What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us ...

High speed radial drilling machine, radial drilling machine, drilling machine, boom drilling machine, high speed radial drilling machine -Clamping table: 400 x 1100 mm -Projection: 930 mm -Taper mount: MK4 -Engine power: 1.35/1.8 kW -Speed: 41-1700 rpm -Columns: Ø 200 mm -Spindle stroke: 125 mm -Thread cutting device: YES -Feed: 0.075 - 0.3 mm/rev -Dimensions: 1800/1235/H2240 mm -Weight: 1500kg

Granule dryers, compressed air dryers, continuous dryers, granule drying systems -Manufacturer: digicolor, Granule dryer type Dehumidifying Dryer -Model: DT 204 M -Power: 10000 W -Side channel blower: Siemens Elmo-G 1.5 kW -Individual components: see photos -Dimensions: 1020/610/H1550 mm -Weight: 241 kg

Linear drive, linear gear, lifting gear, spindle drive, linear axis, linear rail, linear guide, roller guide rail, guide carriage, guide rail, rail guide for tool dispensing systems -Manufacturer: igus, linear drive type DryLin T from Achterberg Toolbase AK -Actuator: DLG 060-068.03 -Threaded rod: Ø 12 x 980 mm -Number: 8x linear drive available -Price: per piece -Dimensions: 1615/110/H120 mm -Weight: 5.5 kg/piece

Roller conveyor, roller track, powered roller conveyor, roller track - rotatable with rotary unit via servo motor -stable design -electrically powered -Drive motor: 0.37 kW 76 rpm -Roller width: 1450 mm -Conveyor length: 1400 mm -Roller diameter: 105 mm -Rollers: rubberized -Shaft diameter: 25 mm -Adjustable delivery height: 950 mm -driven: via belt -Dimensions: 1400/1650/H960 mm -Weight: approx. 300 kg

BIG Adapter Genie/Terex on three-point,  with adjustable lower link jaw hooks and detachable drawbar, Own weight approx. 190 kg, KAT 3

BIG adapter Manitou on three-point hitch, - with adjustable lower link hooks and removable hitch, - Net weight approx. 190 kg

The Florin Mini Compact Dryer is a compact drying system for applications where residual moisture must be removed or products must be blown off specifically. The system was developed as an energy-efficient alternative to classic compressed-air blow-offs and operates without a compressed-air supply., Typical application areas are blowing off coded surfaces before labeling, removal of residual moisture after washing or filling processes, drying of closures, cap feeding, and ejection of empty bottles. The compact design allows the system to be integrated into existing production lines even in confined spaces., With a power consumption of up to 180 watts and an air flow rate of 52 m³/h, the Mini Compact Dryer offers an energy-efficient solution for numerous applications in the beverage, food, and packaging industries. The IP67 protection rating enables use in demanding production environmen ...

General SKU312X492 MakeALLGAIER PROCESS TECHNOLOGY GmbH TypeWS-R-V-T-2.80-0.50-0.30 No.380 Year of construction2013 LocationBarneveld Main Features MaterialStainless steel Motor11 KW Surface0.75 m2 Specified Features - Fluid bed dryer continuous Continuous fluidbed dryerContinuous operation, pressure/suction mode Surface0,75 m² Bed sizes300 x 2500 mm Product inletø 150 Product outletø 200 Number of sections:3 Air inlet2x ø 400: 2x ø 80 (warm air blending) Air outlet3x ø 250 Vibro motorcheck Motor11 kW (400 V 1475/477 rpm) With variable speed drivecheck With fancheck Motorcheck Capacity500 kg/h wet product With cyclonecheck Heating unit (oil)(Thermal oil: Heat Exchanger) Max. temperatureApprox. 170 °C: inlet air MaterialStainless steel 1.4301 (304) General Mounted on mild steel framecheck Floorspace3,9 x 2,25 m Total height2,9 m CEcheck Extra inf ...

General SKU327W690 MakeDrais Mannheim TypeTR400 E PS EMS 180 No.5700 Year of construction1998 LocationBarneveld Pressure Working pressure40 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Extra information Max. temperature165 °C Main Features MaterialStainless steel Volume540 Ltr. Specified Features - Paddle dryer Paddle dryercheck Capacity550 l (netto 400 l ) Trough sizes± 700x800 mm Manholedia. 700 mm OutletDN125 With jacket29 l Max. temperature165°C With mechanical sealcheck Motorcheck Speed mixing shaft45-135 rpm With lump breaker1500 rpm Motorcheck MaterialStainless steel With jacketcheck General Floorspace3,1 x1,9 m Total height3,2 m Weight5800 kg Extra information Extra SpecificationsShaft seal: double-acting mechanical seals Heating/cooling double jacket (max. 6 bar) and head condenser (vapor dome) Paddle  ...

taper MK: 3 serial number: 4131 throat: 1000 mm documentation: ja clamping: hydraulisch kW weight of the machine ca.: 2,6 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Durselen PB 16A four-head paper drill - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Durselen PB 16A four-head paper drill Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers Laminators Offset printing machinery Others Paper drills Perfect binders Pile turners Spare parts Stitching machines Durselen PB 16A four-head paper drill Price: 8750 EUR Download PDF Durselen PB 16A four-head paper drill The device is in perfect condition, like new! This is the newest one. currently produced model. Production Germany. Four drilling heads with adjustable spacing. The machine has a pneumatic drill cooling system. Sliding work table. Automatic column system – a belt that is moved to the next position when worn out Tec ...

Nagel Citoborma 480AB Paper Drill - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Nagel Citoborma 480AB Paper Drill Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers Laminators Offset printing machinery Others Paper drills Perfect binders Pile turners Spare parts Stitching machines Nagel Citoborma 480AB Paper Drill Price: 2500 EUR Download PDF Nagel Citoborma 480AB Paper Drill This machine is in very good condition. It has four drilling heads. Technical specifications: Drill bit distance: 45-285 mm Drill diameter: 2-20 mm Stack height: 60 mm Weight: 275 kg Automatic drilling cycle, controlled by a foot pedal and manual buttons. Sturdy construction on a pedestal. The drill table is adjustable in all planes ...