dr hochstrate used for sale

Turning device, turning station, turning table, rotary station, rotary table, hydraulic press, workshop press, oil hydraulic press, workshop hydraulic press -without: hydraulic unit (can be supplied at an extra cost) -Turning station for: rotating workpieces -Inner width: 1075 mm -Interior height: 720 mm -Transport dimensions: 2840/1600/H2300 mm -Weight: 969 kg

Motor spindle, milling spindle, motor spindle, AC spindle motor, electric motor, DC motor, servo motor, milling motor -Application: Milling/Drilling -Motor spindle: was tested on a robot -Operating hours: 4350 hours -Motor spindle: 55 kW -Servo inverter: Lenze Servo Drives 9400 -Recording: HSK32 -hydraulic tool clamping OTT Type: 95.102.779.0.2 V01 -Spindle cooling BKW type: WRK07/PC41 -Control cable -Dimensions of control cabinet: 1118/800/H2430 mm -Weight: 694 kg

Pressure intensifiers, pressure medium converters, flow control valves -Operating pressure ranges -Hydraulic part (power part): 2 - 32 bar -Pneumatic part (control part): 3 - 10 bar -Volume flow: max. 16 l / min. at (6 bar inlet pressure, load-dependent) -min.: 2 cc/min. (Hydraulic oil with a viscosity of 21 mm³/s [3°E] at 50 °C) -Screw connections hydraulic side: G3/8 pneumatic side: G1/8 -Dimensions: 140/70/H68 mm -Weight: 1.1 kg

High-pressure radial fan, dust extractor fan, exhaust gas extractor, heating fan, welding smoke extractor, extractor, fan, pressure fan, vacuum fan -Motor power: 1.1 kW -Speed: 820 rpm -Volume output: m³/min -Pressure increase mmWS -Connection input: Ø 250 mm -Connection output: 355 x 355 mm -Number: 1x fan available -Price: per piece -Dimensions: 440/490/H575 mm -Weight: 34 kg

Control cards for lamp-pumped lasers, marking lasers, control cards, input cards, controls -Manufacturer: SLS Spectron Laser Systems -Control comes from a marking laser -Type: Handling Gretag Laser 6211 -Control is sold untested from stock, so as a spare parts carrier -Dimensions: 482/400/H88 mm -Weight: 5 kg

Control cards for lamp-pumped lasers, marking lasers, control cards, input cards, controls -Manufacturer: SLS Spectron Laser Systems -Control comes from a marking laser -Type: Handling Gretag Laser 6211 -Control is sold untested from stock, so as a spare parts carrier -1x card type: Gretac SPT 68.12.00 -1x card type: Gretac GPR 68.11.90 -1x card type: Gretac SIP 68.11.87 -1x card type: Gretac IOF I 68.11.96 -1x card type: II 34.74.11 -1x card type: Gretac GSP 68.12.24 -1x card type: Gretac ASP 68.12.36 -1x card type: Gretac GHD 68.12.28 -1x card type: Gretac HSP 68.12.32 -1x card type: Gretac CKB 68.12.48 -1x: Positive Switching Regulator PSR 128E -1x: Positive Switching Regulator PSR 510E -Dimensions: 482/400/H620 mm -Weight: 29 kg

Rotary drive, actuator, actuators, gear motor, electric motor, electric gear motor -Actuator for: gate valves, locks, ... -Speed: 40 rpm -Power: 0.7 kW -Construction: hollow shaft -Diameter hollow shaft: 41 mm -Protection class: IP 57 -Number: 1x drives available -Price: per piece -Dimensions: 500/520/H310 mm -Weight: 32 kg

rotary actuator, actuator, actuators, geared motor, electric motor, electric geared motor -Actuator for: gate valves, locks, ... -Speed: 160 rpm -Power: 8.5 kW -Design: hollow shaft -Hollow shaft diameter: 30 mm -Protection class: EX -Number: 2x drives available -Price: per piece -Dimensions: 850/750/H560 mm -Weight: 86 kg

Pressure zone turret, softforming interchangeable profiles for softforming machines, double-end tenoners, edging machines, scoring motor, chipper motor, milling motor for edging machines -HOMAG softforming interchangeable profiles for softforming profiles can be quickly converted to straight edges -with heavy leadership -laterally movable -with counter -Dimensions: 1300/780/H620 mm -Weight: 260 kg

Turning station, turning table, turning station, turntable, transport system, roller conveyor -for: edge banding machine, edge banding machine, edge banding machine -Turning station: for turning workpieces -Roller conveyor: wide -Roll width: 2900 mm -Roller conveyor length: 1500 mm -Turning head roller: rubberized -other roller conveyors available for an extra charge -Transport dimensions: 1500/3850/H1950 mm -Weight: 969 kg

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Transfer: in the current condition as seen -Vacuum suction cup: with damage -Version: with vacuum suction cup, equipped with directional valve and induction knife for the stroke -Stroke: 70 mm -Sucker: Ø 125 mm -Piston rod: 20 mm -Total length: 420 mm -Total length extended: 490 mm -Number: 31 pieces available -Price per piece -Dimensions: 420/140/120 mm -Weight: 4 kg/piece

Rotary device for edge processing, turning station, turning table, rotary station, rotary table, transport system, roller conveyor -for edgebanding machine, edge banding machine, edge bander -Turning station: for rotating workpieces -Roller track: Narrow -Roller width: 1300 mm -Roller conveyor length: 2900 mm -with: adjustable impact wall -Roller conveyor: Wide -Roll width: 3400 mm -Roller conveyor length: 1400 mm -Swivel head roller: rubberized -Transport dimensions: 3000/1500/H960 mm 3500/1550/H1850 mm -Weight: 1000 kg

Heavy-duty lathe, lathe, lathe, lead and tension spindle lathe, lead and tension spindle lathe, automatic lathe -Manufacturer: WMW, automatic lathe type DRT 50m -Turning length: 550 mm -Turning Ø over bed: 530 mm -Spindle bore: Ø 63 mm -Spindle speeds: 9 - 450 rpm -Three jaw chuck: Ø 200 mm -Turret: with accessories, see photos -Drive motor: 5.3 / 6.8 kW -Dimensions: 2420/1040 / H1460 mm -Weight: 2200 kg

live center, live center, live morse taper, live center, live lathe center, live center, slip-on center, heavy duty live center -Manufacturer: Roterberg Drehmeister, revolving center point slip-on point -Type: 80 TGL 30-2325 -Recording: see photos -Center point: Ø 50 - 148 mm -Total dimensions: Ø 149 x 220 mm -Weight: 9.8kg

Geared motor, electric motor, electric geared motor, bevel geared motor -Manufacturer: SEW-Eurodrive, geared motor with brake -Type: RF07 DR63M4/BR -Speed: 118 rpm -Power: 0.18 kW -Hollow shaft: Ø 35 x 180 mm -Protection rating: IP54 -Brake: 3.2 Nm -Dimensions: 395/118/H165 mm -Weight: 8.4 kg

Servo drive, control unit, converter, frequency converter, frequency inverter, drive inverter, compact inverter, drive control unit, control unit -Manufacturer: Reis Robotics, servo controller, motor control unit -Type: Drive 4025 AT -Number: 2x servo controllers available -Price: per piece -Dimensions: 350/155/220 mm -Weight: 6.3 kg/pc.

Gear motor, electric motor, electric gear motor, adjustable gear motor, variable speed gear motor -Manufacturer: SEW-Eurodrive, geared motor -Type KAF37 DRS71S4BE05HR/MM03/AMA6 i = 106.38 -Drive motor: with frequency converter MM03D-503-00 -Speed: 13 - 2.6 rpm -Power: 0.37/0.075 kW -Hollow shaft: Ø 30 x 120 mm -Protection rating: IP54 -Quantity: 2x geared motor available -Price per piece -Dimensions: 490/290/H190 mm -Weight: 26 kg/pc.

Gear motor, electric motor, electric gear motor, adjustable gear motor, variable speed gear motor -Manufacturer: SEW-Eurodrive, geared motor -Type KAF37 DRS71S4BE05HR/MM03/AMA6 i = 44.46 -Drive motor: with frequency converter MM03D-503-00 -Speed: 31 - 6.3 rpm -Power: 0.37/0.075 kW -Shaft: Ø 25 x 50 mm on both sides -Protection rating: IP54 -Quantity: 1x geared motor available -Price per piece -Dimensions: 470/290/H210 mm -Weight: 26kg

Gear motor, electric motor, electric gear motor -Sale/sale: in current condition as seen -Connection housing: damaged, cover missing, see photos -Manufacturer: SEW-Eurodrive, geared motor type WA20 DR63S4 -Speed: 18 rpm -Power: 0.12 kW -Shaft: Ø 14 x 35 mm -Protection rating: IP55 -Dimensions: 300/170/H155 mm -Weight: 7.4 kg

Gear motor, electric motor, electric gear motor, bevel gear motor -Manufacturer: SEW-Eurodrive, geared motor -Type WA20 DR63L4/IS i 39.00 -Speed: 33 rpm -Power: 0.25 kW -Hollow shaft: Ø 20 x 90 mm -Protection rating: IP54 -Quantity: 1x geared motor available -Dimensions: 300/220/H150 mm -Weight: 9.2 kg

Gear motor, electric motor, electric gear motor, adjustable gear motor, variable speed gear motor -Manufacturer: SEW-Eurodrive, geared motor -Type SA37 DRS71S4/MM07 i = 4.86 -Drive motor: with frequency converter MM07D-503-00 -Speed: 596 - 123 rpm -Power: 0.55/0.055 kW -Hollow shaft: Ø 20 x 105 mm -Protection rating: IP54 -Dimensions: 360/250/H200 mm -Weight: 14.8 kg

Gear motor, electric motor, electric gear motor, adjustable gear motor, variable speed gear motor -Manufacturer: SEW-Eurodrive, geared motor -Type SA37 DRS71S4/MM07 i = 4.86 -Drive motor: with frequency converter MM07D-503-00 -Speed: 596 - 123 rpm -Power: 0.55/0.055 kW -Hollow shaft: Ø 20 x 120 mm -Protection rating: IP54 -Dimensions: 360/250/H190 mm -Weight: 14.0 kg

Forklift battery charger, industrial charger, forklift battery charger, industrial charger, silicon rectifier -Manufacturer: Sonnenschein charger dryfit TL 24V 260-300 Ah -Input voltage: 220 V -Power: 24 V / Battery capacity 260-300 Ah -Quantity: 1x charger included -Dimensions: 600/410/H450 mm -Weight: 40 kg

Gear motor, electric motor, electric gear motor, spur gear motor -Manufacturer: SEW-Eurodrive, spur geared motor type R37 DRSS0S4/Z -Speed: 1400/43 rpm / i= 32.40:1 -Power: 0.75 kW -Shaft: Ø 25 x 40 mm -Protection rating: IP54 -Quantity: 1x motor available -Price per piece -Dimensions: 435/158/H200 mm -Weight: 22 kg/pc.

Geared motor, electric motor, electric geared motor, spur geared motor, frequency-controlled geared motor, adjustable geared motor, variable speed geared motor -Manufacturer: SEW-Eurodrive, adjustable geared motor -Type RF07 DRS71S4/MM03 i = 4.86 -Drive motor: with frequency converter MM07D-503-00 -Speed: 25 to 280 rpm / i= 11.18 -Power: 0.37/0.074 kW -Shaft: Ø 20 x 40 mm -Protection rating: IP54 -Dimensions: 360/250/H180 mm -Weight: 10 kg

Absolute encoder, encoder, encoder, encoder, absolute encoder, absolute encoder, function encoder, resolver, resolver, incremental encoder -Manufacturer: Sick, incremental encoder encoder programmable -Type: DRS61-E4K08192 -Item no.: 1034995 -Voltage: 10-32V -Shaft: Ø 10 x 20 mm -Quantity: 2x encoders available -Price per piece -Dimensions of box: 190/110/H80 mm -Weight: 0.4 kg/pc.

Gear motor, electric motor, electric gear motor -Manufacturer: SEW-Eurodrive, geared motor -Type: SA37 DRS71M4 -Speed: 72 rpm i= 19.13 -Power: 0.55 kW -Shaft: Ø 20 x 120 mm -Protection rating: IP54 -Quantity: 4x motor available -Price per piece -Dimensions: 500/190/H140 mm -Weight: 15 kg/pc.

Gear motor, electric motor, electric gear motor -Manufacturer: SEW-Eurodrive, geared motor -Type: KA37 DRS71M4/RS/TF/AL -Speed: 1360/23 rpm i= 58.60 -Power: 0.55 kW -Hollow shaft: Ø 30 x 120 mm -Protection rating: IP55 -Quantity: 1x motor available -Price per piece -Dimensions: 510/135/H185 mm -Weight: 24 kg/pc.

Gear motor, electric motor, electric gear motor, adjustable gear motor, variable speed gear motor -Manufacturer: SEW-Eurodrive, electric geared motor without gearbox -Type SA37 DRS71S4/MM07 -Drive motor: with frequency converter MM07D-503-00 -Motor speed 2900/597 rpm -Power: 0.55/0.055 kW -Shaft: Ø 10 -14 mm, spur gear see photos -Protection rating: IP54 -Dimensions: 240/186/H245 mm -Weight: 8.4 kg

Press brake tool holder for bending tool, die, upper knife, upper tool -Tool holder: pressure plate intermediate holder for: press brake -Holder: hole spacing 100 mm -Dimensions: see photos -Quantity: 5 holders available -Price: per piece/minimum purchase 5 items. -Dimensions: 150/15/H50 mm -Weight: 0.6 kg/pc.

Tool holder, milling holder, milling tool, adapter, intermediate sleeve, reducing sleeve, Weldon reduction -Manufacturer: Dornag Swiss, Milling holders: Adapter cylinder Weldon shaft - reduction Weldon 3 pieces -Type: Dia 32 Ø8/12/20 mm -Price/Delivery: complete -Transport dimensions: 100/52/130 mm -Weight: 1.8 kg/total

Gear motor, electric motor, electric gear motor, worm gear motor, parallel shaft gear motor -Condition: Gear motor is unused -Manufacturer: SEW-Eurodrive, gear motor with brake, parallel shaft gear unit series F -Type: FV67/G DRE100LC4BE5HF/TF -Translation: i= 25.13 -Speed: 58 rpm -Power: 3 kW -Protection class: IP54 -Gear shaft: Ø 47/41.2 x 180 mm -Brake: 28 Nm -Dimensions: 610/360/H260mm -Weight: 70kg

Gear motor, electric motor, electric gear motor, worm gear motor, parallel shaft gear motor -Condition: Gear motor is unused -Manufacturer: SEW-Eurodrive, gear motor with brake, parallel shaft gear unit series F -Type: FA57/G DRE132S4BE5/TF -Translation: i= 7.73 -Speed:189 rpm -Power: 4 kW -Protection class: IP54 -Hollow shaft: Ø 40 x 165 mm -Brake: 55 Nm -Number: 3x motor available -Price: per piece -Dimensions: 660/350/H280mm -Weight: 78 kg/pc.

Geared motor, electric motor, electric geared motor, worm geared motor, bevel geared motor, bevel geared motor -Condition: unused -Manufacturer: SEW-Eurodrive, bevel gearmotor with brake -Type: K77 DRE132MC4BE11/TF -Translation: i= 7.24 -Speed: 203 rpm -Power: 7.5 kW -Protection class: IP55 -Shaft: Ø 50 x 100 mm on both sides -Brake: 55 Nm -Number: 1x motor available -Price: per piece -Dimensions: 860/410/H290 mm -Weight: 132 kg/piece

gear motor, electric motor, electric gear motor, spur gear motor -Condition: unused -Manufacturer: SEW-Eurodrive, spur gear motor -Type: RF97 DRN132S4/TF i27.58 -Speed: 53 rpm -Power: 5.5 kW -Shaft: Ø 60 x 90 mm -Protection class: IP54 -Quantity: 2 pieces available -Price: per piece -Dimensions: 860/350/H410 mm -Weight: 170 kg/piece

quick-change tool holder, tool holder head, quick-change tool holder, quick-change drilling tool holder, quick-change boring bar holder, quick-change turning tool holder -Quick-change tool holder: Quick-change boring bar holder -Recording dimensions: see photos -Number: 2x steel holders available -Price: per piece -Dimensions: 115/55/H130 mm -Weight: 1.5 kg/piece

Hydraulic press, bending machine, straightening machine, profile straightening system, strip straightening machine, strip straightening device, shaft straightening system, combined bending machine-straightening press, profile bending machine, bending machine, flat iron bender, horizontal bending/straightening press, horizontal bending machine -Hydraulic press: Straightening system Straightening machine Profile straightening system with roller conveyor -Pressure force: 10 ton -Pressure: max 100 bar -Roller conveyors: 2x 1000/170/H1110 mm / rollers Ø 56 x 140 mm -Transport dimensions: 1335/1220//H1470 mm -Weight: 807 kg

Gear motor, electric motor, electric gear motor, worm gear motor, parallel shaft gear motor -Condition: unused -Manufacturer: SEW-Eurodrive, gearmotor with brake, parallel shaft gear unit series F -Type: FH87/G DRN132M4/BE11HF/TF -Speed: 50 rpm -Power: 7.5 kW -Protection class: IP54 -Hollow shaft: Ø 65 x 280 mm -Brake: 55 Nm -Quantity: 1 piece available -Price: per piece -Dimensions: 800/330/H530 mm -Weight: 190 kg

Gear motor, electric motor, electric gear motor, worm gear motor, parallel shaft gear motor -Condition: Gear motor is unused -Manufacturer: SEW-Eurodrive, gear motor with brake, parallel shaft gear unit series F -Type: FH87/G DRS132S4BE5HF/TF -Speed: 68 rpm -Power: 5.5 kW -Protection class: IP54 -Hollow shaft: Ø 60 x 280 mm -Brake: 28 Nm -Number: 2x motor available -Price: per piece -Dimensions: 760/335/H530 mm -Weight: 155 kg/piece

winch rope, crane rope, hoist rope, wire rope, stainless steel rope, forestry winch rope -Manufacturer: DIEPA Drahtseilwerk Dietz, crane rope winch rope Ø 22 mm -Rope type: DIEPA X 43 Ø 22 mm RHOL 1770 with 1 end with full thimble, see photos -Length: 44 m -Number: 4x wire rope available -Price: per piece -also other crane ropes: available -Transport dimensions: Ø 700 x 510 mm -Weight: 120 kg / piece

Gearboxes, spur gears, bevel gears, transmission gears, crane gears, hoist gears, grab lifting and closing gears -Manufacturer: PIV Drives, gearbox type D-315-22H -Translation: 34.726 :1 -Motor: without electric motor (can be supplied at extra cost) -Input- shaft: Ø 60 x 140 mm -Output hollow shaft: Ø 160 x 500 mm -Dimensions: 720/1300/H725 mm -Weight: 1321 kg

Winch rope, crane rope, hoist rope, wire rope, stainless steel rope, forestry winch rope -Manufacturer: GHD Görlitzer Hanf & Drahtseilerei, crane rope winch rope Ø 22 mm -Nominal strength: 1960 N/mm² -Rope type: 6x36WS-IWRC -Length: 60 m -Quantity: 1x wire rope available -Shipping/Price: complete -also other crane ropes: available -Transport dimensions: Ø 820 x 620 mm -Weight: 196 kg

Gear motor, electric motor, electric gear motor, worm gear motor, worm gear motor, Spiroplan gear motor, SPIROPLAN® right-angle gear motor -Manufacturer: SEW-Eurodrive, SPIROPLAN® right-angle gearmotor unused -Type: WF10 DRN63MS4 -Speed: 23 rpm -Power: 0.12 kW -Shaft: Ø 16 x 40 mm -Protection class: IP54 -Number: 3x motor available -Price: per piece -Dimensions: 290/200/H115 mm -Weight: 6.2 kg/piece

Gear motor, electric motor, electric gear motor, worm gear motor, worm gear motor, Spiroplan gear motor, SPIROPLAN® right-angle gear motor -Manufacturer: SEW-Eurodrive, SPIROPLAN® right-angle gearmotor unused -Type: WA10/T DRN63MS4 -Speed: 23 rpm -Power: 0.12 kW -Hollow shaft: Ø 16 x 70 mm -Protection class: IP54 -Number: 1x motor available -Dimensions: 285/115/H160 mm -Weight: 5.8 kg.

Winch rope, crane rope, hoist rope, wire rope, stainless steel rope, forestry winch rope -Manufacturer: GHD Görlitzer Hanf & Drahtseilerei, crane rope winch rope Ø 22 mm -Nominal strength: 1960 N/mm² -Rope type: 6x36WS-IWRC -Length: approx. 53 m -Number: 4x wire rope available -Price: per roll -also other crane ropes: available -Transport dimensions: Ø 750 x 560 mm -Weight: 187 kg/piece

Hose reel, hose unwinder, tank hose reel, wall-mounted reel, oil conveyor, hose reel, automatic hose reel, oil hose reel, grease hose reel, grease hose reel, compressed air hose reel -Hose reel: Double hose reel oil-compressed air -Oil hose reel: length 6.65 m with flow meter -Compressed air: hose length 10.57 m -Dimensions: 800/500/H550 mm -Weight: 76 kg

Dividing head, spiral milling device, dividing head, tool holder for grinding, drill grinding machine, milling cutter grinding machine, drill grinding holder -Manufacturer: Stankoimport, dividing head/tool holder for tool grinding machine -Type: 36642.M1 -Parting head: rotatable/tiltable -Mounting/Dimensions: MK5 see photos -Dimensions: 300/270/H180 mm -Weight: 21.6 kg

Linear bearing, linear rail, linear guide, roller guide rail, guide carriage, guide rail, roller carriage -Manufacturer: igus DryLin T, guide rail with 2 guide carriages drylin T -Guide carriage: Type TW-01-25 -Rail length: 300 mm -Rail width: 34 mm -Number: 6x linear guide available -Price: per piece -Transport dimensions: 300/70/35 mm -Weight: 1.0 kg/piece

Geared motor, electric motor, electric geared motor, spur geared motor -Manufacturer: SEW-Eurodrive, spur gear motor -Type: RF47 DRN80M4/DI/KD1/TF/E18Z i 47.75 -Speed: 30 rpm -Power: 0.75 kW -Shaft: Ø 30 x 60 mm -Protection rating: IP54 -Number: 4x geared motors available -Price: per piece -Dimensions: 510/230/H200 mm -Weight: 28 kg/pc.

Container turning device, welding turning device, welding turning device, welding device, welding turntable, welding turntable and tilting table, welding turning device, welding turntable tilting table -Welding turning device: turning length 3130 mm -Turntable: Ø 800 mm -Drive: Servo Motor 1/1.6 kW with cooling, see photo nameplate -Rotation direction: right/left rotation -Transport dimensions: 3890/900/H1420 mm -Weight: 880 kg