dr hochstrate used for sale

diameter: . mm tool adaptor: . length: . mm total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m Post boring bars and turning toolsThe techn. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 12,000 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

material width: 200 mm material thickness: 3 mm feed length: 999999 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Drais Dissolver for sale. Manufacturer: Drais Model: RSV 40-3/VAAS Year: 1981 In the photos are also two containers that are included in the scope of delivery. Find more here - / Contact us at -

2020 Giardiana DUAL TECH 420 SBC DRY Find more here - / Contact us at -

3X Identical Steam Turbine sets Each steam turbine set is a complete system except the boiler for the steam generation. If sufficient water vapour is already available from another source, this can also be used. In this case, a boiler is no longer required. The three sets have never been run (like new), however, this sets are already more than 10 years old (year of production 2009). The project for which this sets were purchased has never been implemented. The steam turbine sets are running on 60 Hz. Depending on the country, where the steam turbine sets should be used, they may have to be converted to 50 Hz (replacing the gearbox and the clutch of the generator). This is possible and can be done by experienced companies. We can recommend a German company that has extensive experience in the errection and maintenance of this type of steam turbine. The unused steam turbine sets are pa ...

weight of the machine ca.:3 t

diameter:315 mm Speed:max. 2400 min. -1 weight of the machine ca.:25 kg

Indoor agriculture / vertical hydroponic farm, and the machines are associated with these operations. We are talking about leafy vegetables and herbs, to name a few examples: Iceberg lettuce, romaine, basil, mint, coriander, rocket etc. The machines are part of the same solution developed and manufactured by the Taiwanese company YesHealth. The machines are 2 years old. The drying machine has not been in operation for one year. Seeder, 2 kW Harvester, 8 kW Cleaning and drying machine, 20 kW Labelling machine, 300W Find more here - /

material width:500 mm material thickness:0,2 - 3,8 mm feed length:0 - 9999,9 mm number of rolls:2 material cross-cut:128 mm² speed:60 m/min power requirement:2,0 kW dimensions (WxDxH):1,2 x 1,3 x 1,5 m roll feed:Servo control:Siemens S 7, modification 2002

material width:203 mm material thickness:0,1 - 1,9 mm feed length:101 mm weight:0,1 t dimensions (WxDxH):0,5 x 0,8 x 0,5 m

Technical Data - Year of Manufacture: 08/2019 - Dimensions (LxWxH): 35x4x5 m - Total Weight: Drying approx. 7 tons, Washing approx. 9 tons - Throughput: approx. 700 kg/h aluminum shavings, approx. 1400 kg/h alloy shavings - Energy Source (Drying): Gas - Energy Source (Washing): Gas - Gas Consumption: approx. 44 m³/h - Electricity Consumption: approx. 37 kWh/h - Dimensions (LxWxH): 35x4x5 m - Electrical Data: - Nominal Voltage: 400 V - Network Frequency: 50 Hz - Control Voltage: 24 V Find more here - / Contact us at -

Lips LMP Extention Printcard 1185082-6111610321 WÄrtsila Art.No:E000004111

Wärtsila Lips Drunen LMP REV 1 LMP REV 1 23456789 4306590023 Wärtsila Art No.: W006927795

power capacity: kW volt: V ampere: A total power requirement: kW weight of the machine ca.: 84 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lips Drunen W006927795 Printed Circuit Board REV 1 23456789 Wärtsila Tuningcenter

Manufacturer: Steinert Type of Machine: Wet Drum Magnetic Separator Year of Manufacture: 2015 Model: WDS 92 92 [without CE package] Find more here - / Contact us at -

Key data: 400 mm, 40 mm

- incl. key Specifications - Table diameter: 400 mm - Table height: 40 mm - Rotation range: 360° - Pan/tilt range: 0 - 90 ° - Max. load capacity (horizontal table): approx. 200 kg - Max. load capacity (table vertical): approx. 100 kg - Dimensions mounting plates horizontal/vertical: 375 x 500 / 375 x 255 mm - Dimensions rotary table WxHxD (table horizontal): approx. 570 x 280 x 500 mm - Net weight: approx. 200 kg

Two-side evaporator GEA KUBA Type: DRS 44637 Cooling capacity: 60.7 kW at DT7, 58 kW at DT8 Fin spinning: 7 mm Fans: 4 x 630 mm Dimensions: 4500 x 1550 x 700 mm Block made of stainless steel Refrigerant: NH3 Volume: 72 L Weight: 650 kg Quantity in stock: 3 Reference number: CH 535 Condition: Used Price on request. We have many others machines for meat industry and cooling - handtmann, seydelmann, viessmann, bitzer, copeland, . Check our offers.

x-axis: 10.100 (2x 5.000) mm y-axis: 3.000 mm z-axis: 1.500 mm Control: Sinumerik 840 D Siemens distance between columns: max. 3.000 mm passage: max. 1.950 mm distance spindle center to table: max. 1.800 mm distance spindle nose and table: 1.350 / 1.500 mm Main spindle:: type: P 8005020/00-4 turning speed range - main spindle: max. 18.000 min/-1 power capacity - main spindel: 20 kW max. Torque: 48 Nm tool taper: HSK-A63 DIN 69063 Spindle Extension: 450 mm swivellable: B: +110° / -10 ° rotatable: C: +/- 200 ° Main spindle:: type: P 8002320/00-4 turning speed range - main spindle: 20 - 5.000 min/-1 power capacity - main spindel: 40 kW max. Torque: 1.100 Nm tool taper: HSK-A100 DIN 69063 Spindle Extension: 300 mm swivellable: B: +110° / -10 ° rotatable: C: +/- 200 ° work table:: table surface area: 4.000 x 2.200 (2x) mm max. table load: 12 / 20 t height over floor: 700 mm number of ...

Refer to code 1148 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

x-travel: 2000 mm y-travel: 1000 mm z-travel: 1000 mm Control: Heidenhain type: TNC 430 : spindle turning speed range: 15-1450 U/min Table area: 2300x1200 mm Spindle: 200 mm spindle stroke: 200 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Nr 3762 Maschine wurde überholt machine is retofit The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

HF MIXING GROUP, FRANCIS SHAW, POMINI. Chamber/Drilled Sides: GK250-K6A-K5-VIC275-11D. Refer to code 1117-1118-1119-1120-1148 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

turning diameter over bed: 360 mm turning diameter over slide rest: 220 mm turning length: 1000 mm turning diameter in the gap: 380 mm turning speeds: 70 - 2000 U/min centre height: 180 mm spindle bore: 50 mm tailstock quill taper MT: 3 MK connected load frequency: 230 oder 400 V total power requirement: 1,8 kW weight of the machine ca.: 0.65 t dimensions of the machine ca.: 2,0 x 0,8 x 1,56 m Professional industrial machine 3-axis digital display 3-jaw chuck 180 mm. 4-jaw chuck 200 mm. Faceplate 280mm Bezel fixed Bezel rotating 4-fold steel holder. Halogen machine light Machine light Foot brake removable chip tray, chip protection wall Hardened and ground bed rails Complete coolant system Feed protection Machine tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Grain sampler type 1938 DRP 1 litre sampler, in a wooden box with drawer, Complete with tripod (lower part), hollow measure, filling tube, knife, flow weight, scale with tripod and weight tray Used, checked and adjusted by a specialist laboratory company, newly calibrated until 2028 Operating regulations and official boards are enclosed

Decoiler Coil weight: 4,5 ton Material width max.: 520 mm Coil exterior diameter: 1600 mm Expansion range: 460 - 530 mm Leveller / Straightener Material width : 20 - 400 mm Number of levelling rolls: 7 pcs. Diameter of the levelling rolls: 60 mm Number of pull out rolls: 4 pcs. Diameter of the pull out rolls: 60 mm Material thickness: 0,4 - 3,5 mm Feeding speed: 2 - 10 m / min Roll feeder Material width max.: 310 mm Material thickness: 3,0 mm Material thickness at max. width: 2,8 mm Material thickness at max. cross section: 850 sq mm Number of feeding rolls: 2 pcs. Diameter of feeder rolls : 80 mm Feeding speed: 104 m / min Required power: 1,5 kW

Manufacturer: SEW Getriebemotor 20 Hohlwelle 0,25 kw, Type: SA 37/T DR63L4/TH, Motor with gear: yes, From machine: Transportband, Power kW: 0,25, Volt/Hz: 220-380/50, pm: 1300/30/1600/37, Motor with gear: yes, Bore mm: 20, FREE TEXT: Mit Drehmomentstütze,

Manufacturer: LIgmatech Transport/Drehstation, Type: Drehstation, Year: ca.1998, Control: no, Working length mm: 1500, Working widht mm: 1200, Total hight mm: 850, Total hight mm: 850, FREE TEXT: Antrieb Band muss nachgrüstet werden, Year :ca.1998

Manufacturer: Sabore, Type: Drucklufttrockner SD 31 A, Year: 1994, Final compressed pressure bar: 16, Drive power kW: 0,17, Year :1994

Manufacturer: Protool, Type: Bohrm. DRP 8 E, Drilling engine kW: 0,460, FREE TEXT: mit Ständer,

Manufacturer: Heesemann Druckbalken war noch eigebaut, Type: MFA 6 oder MFA 8 , FREETEXT1: Hubmagnet 6 mm, FREETEXT2: 24 Volt, FREETEXT3: Länge 1470 mm, FREETEXT4: Bauhöhe 200 mm,

Manufacturer: Lohenner Druckluftkessel, Year: 1990, Compressed air boiler litres: 1000, Wight approx. kg: 400, Year :1990

Manufacturer: Elektronikkarte Heesemann Kuhnke Rollensteuerung, Type: für Heesemann Druckbalken signale, FREE TEXT: Rollensteuerung 42444100,

Manufacturer: Homag, Type: Drehgeber für Strecke, Serial number: 2-083-02-7010,

Manufacturer: Klöckner, Type: EM4-111-DR1, Seriennummer: 02-3160<CRLF>,

Cylindrincal grinding machine, KNUTH RSM 750, interna/external, DRO, This machine can be inspected under power in our warehouse., Mimu Machine Tools, Gussago BS Italy

Description DROPSA - LUBRICATION UNIT - Capacity: 3 Liters; 50 bar - 240 V; 10 W; 0,5 A

Manufacturer: Geldmeier, Type: Drehtisch, Year: 1995, Control: keine, Turning device: wendevorrichtung, Working length max mm: 1400, Working widht max mm: 950, Feeding speed max m/min: 20, Feeding speed min m/min: no, Headroom adjustable: yes, Roller width in mm: 950, roller diameter mm: 80, Working hight mm: 850, Year :1995

Size: 45 x 150 mm Equipments: Double head paper driller Drill distance 45 - 150 mm Space behind drill heads 100 mm Operation Lever operated, single phase 240 Volts

Drautz lye machine with 2 pullers. and some spare parts Plant technically checked and cleaned. Total length: 3.60m. Hinge folded up 2.50m Width 1.00m Weight 200 kg

REF-2391-B COMAS DRV 400 DOSING-DEPOSITING MACHINE WITH 5 NOZZLES Manufacturer: COMAS Model: DRV Type: 400 Serial no.: 3793 Year of manufacture: 2005 Dosing machine/depositor for the production of pastries Fitted with 5 standard conical nozzles (12 mm diameter) Voltage: 380V / 3-phase Working width: 400 mm Overall belt dimensions (mm): 2,200 x 530 (LxW) Overall machine dimensions (mm): 2,250 x 1,400 x 1,750 (LxWxH)

For Sale: Complete Drum System for Zinc Electroplating Year of Manufacture: 2000 This complete setup includes all essential components for efficient operation: - Drum Line with 5 TW - Centrifuge with TULZ from WMV - ROSS Cooling System - Drum Dryer Find more here - / Contact us at -

Checkweigher Make: Bizerba Model: CWE DRY Ram reject Circa 2009 Touch screen single phase

Key data: 500 mm, 200 mm

Drilling / Milling machine OPTIMUM type OPTI F 40 E Travel X: 500 mm Travel Y: 200 mm Spindle: Ø 80 mm Cone CM3 Spindle exit: 120 mm Spindle speed: from 95 to 3200 RPM Table size: Length 730 mm x Width 210 mm 2 speeds motor Motor power: 1,5 Kw Straight head Cross table Manual Descent Equipped with: 1 rotary vice Voltage: 380 V Dimensions (L x W x H): 1200 x 900 x 1400 mm Weight: approx 350 KG

Decoiler Coil weight: 2 x 4,5 ton Material width max.: 520 mm Coil exterior diameter: 1800 mm Expansion range: 460 - 525 mm Leveller / Straightener Material width : 30 - 500 mm Number of levelling rolls: 11 pcs. Diameter of the levelling rolls: 90 mm Number of pull out rolls: 4 pcs. Diameter of the pull out rolls: 90 mm Material thickness: 0,8 - 5,0 mm Feeding speed: 3 - 30 m / min