dr boy used for sale

Colors: 8 Gearless: No Fast Sleeve change: No 4 motor cnc per printing deck: Yes Computer supervision:Yes Web width:1320 Print width:1300 Min print repeat: 380 Max print repeat:1100 Mech speed: 350m/min working speed: up to 300m/min Unwinding & winding: Turret FLYING SPLICE Max reel diameter 1000 Drying: 2 zones , 4 fans 2 gas burners Video camera: Yes Corona threatment:NO Web guides: FIFE Viscocity control Yes Wash system : yes, F&K Ceramic anilox + closed chambered doctor blade   1x 80 L/cm, 2x 200 L/cm, 2x 120 L/cm, 4x 200 L/cm , 2x 320 L/cm , 3x 400 L/cm   200 sleeves repeat between 390 mm and 1090 mm ( 8 for each following repeat x 390 , 400, 410 , 420 , 430 , 450 , 480 , 510 , 530 , 540 , 550, 630 , 660 , 670, 740 , 780 , 800 , 850 , 880 , 930 , 990 , 1030, 1050 , 1090 + 8 twinlock 740 mm + 8 twinlock 1030   Mandrels for sleeve s 6 x360 , 6x 400 , 6x 420 ...

Manesty Drycota 900 23 Station Double Headed Tablet Press with Type D Tooling • This Double Headed Tablet Press is Mounted on a Common Chassis Plate and Driven via Line Shaft by a Common Drive • Twin Single Compression • Turrets Are Each Fitted With 23 Type D Stations • Upper Keyed Tooling • Removed Side Attached Operation Control Panel N°. of Stations: 23 Voltage: 400 VOLTS Frequency: 50 HERTZ Phase: 3

Dresser-Rand steam turbine (new price 2.8 million EUR), unused and as good as new - built 2009 - inlet steam stream 53,000 kg/h - 1 generator type Syn. 3 phases - 60 Hz, 12.3 MW - 4,500 rqm / 1,800 rqm - gearbox RENK type TL-500, BJ. 2009, GEA surface capacitor, type 2/III/H, BJ 2007, 2 condensate pumps type Etanorm G080-400 G11, BJ 2007

maximum load capacity with horizontal planing disc 60 tons, maximum load with vertical planboard 90° at a load center of one meter 30 tons – with a load center of two meters 19 tons.

Anesthesia Drager Drager Primus Drager Zeus Drager Julian GE DATEX OHMEDA Aestiva 3000 Aestiva/5 7100 Aestiva/5 7900 Aestiva/5 7900 (monitor + gas module) Aespire 7900 (monitor + gas module) Aisys, Yon

Rotary kiln, gas oven, pyrolysis oven, thermolyse furnace used Manufacture: REIDHAMMER Type: DRA 10/150-G-650; DRA 8/100-G-650 Built in 2015 Temperature max 650° C Natural gas Furnace chamber approx. 8 x 2 x 2.2 m Filling volume 1.77; 0.63 m3 Dimensions total approx.: 17 x 2 x 3 m

3692 KW Dresser Tuthill Nadrowski Tandem Condensation Turbine (steam turbine)for sale. 58.000 € plus VAT FCA freely charged in D-Bergisch Gladbach. Scope of supply: Steam turbo set and generator (6 KV). On request, generators with 10 to 11 KV are also available. A suitable capacitor costs 75,000 € extra. Not included: Control. Brand: Leroy-Somer Manufacturer: Tuthill Nadrowski Turbinen GmbH Type: LSA 56 BS 5- 4P Serial No.: 168233-1 Year of construction: 12-2001 Electr. Power: 3692 KW Power: 4625 KVA Voltage: 6000 V rpm: 1500 rpm Size (L x W x H): 3.10 m x 1.80 m x 2.70 m Weight: 10,000 kg Total output HD and ND turbine: 3692 KW. Total weight steam turbo set: 15 tons + 10 tons generator.

Rotary table, rotary indexing table, dividing head, dividing head -Dividing attachment with: three-jaw chuck and crank -Chuck: Ø 160 mm -Dividing head: rotatable, swiveling -Dimensions: 540/470/H250 mm -Weight: 67 kg

air bearing high precision bearings Brand: Drevetti Regman Dimensions: 120 x 60 x 18 mm For more data, please see also photos.

air bearing high precision bearings Brand: Drevetti Regman Dimensions: 95 x 45 x 15 mm

Electronic cables, extension cables, electronic wires -Manufacturer: Draka Comteq, data cable -Type: UC2000 B_A 4G50/125 FRNC -Length: 130 m -Price/Sale: complete -Roll dimensions: Ø 500/330 mm -Weight: 20 kg

Machine vise base plate, clamping plate, vice plate, turntable -with: T- round groove -Grad display -Dimensions: 265/185/H50 mm -Weight: 4.4 kg

Computer monitor, control unit, operating unit, keyboard, screen, control -Manufacturer: Heidenhain, Manual Plus Monitor from lathe Kern CD 480 -Type: 12.1 VGA Unit Rotating. ID No. 367 957-02 -Dimensions: 400/300/165 mm -Weight: 5.8 kg

Machine vise base plate, clamping plate, vice plate, turntable -with: T- round groove -Grad display -Dimensions: 235/175/H50 mm -Weight: 6 kg

floor-plate length: 4000 mm floor-plate width: 1600 mm floor-plate height: 300 mm T-slot - distance: 175 mm T-slot - width: 28/48 mm number of T-slots: 9 total power requirement: kW weight of the machine ca.: 10 t dimensions of the machine ca.: 4000x1600x250 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ventilation duct, ventilation flap, ventilation system, filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings, louver damper, pressure relief damper -Lucoma: Pressure relief valve DRK 370 x 405 mm -Dimensions: 370/405/165 mm -Weight: 5.3 kg

Winch rope, crane rope, hoist rope, wire rope, steel rope -Wire rope: Ø 10 mm -Length: 4 m -for: electric wire rope hoist -Also other crane ropes: available -Weight: 1.45 kg

x-travel: 5300 mm y-travel: 2500 mm z-travel: 1200 mm angular milling head: Table load: 60000 kg column daylight: 2700 mm workpiece height max.: 1700 mm Table dimensions: 5000x2250 mm control: Heidenhain type: 430 : total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Maschine wurde überholt machine is retofit The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Filter control valve, switch-on valve, maintenance unit, water separator -Maintenance unit: with pressure regulator, filter and oiler -Dimensions: 230/260 / H70 mm -Weight: 2 kg

Length: 5000 mm Width: 750 mm Height: 3500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Compressed air breathing apparatus, respiratory protection -2 bottle device -Overpressure with: pressure reducer -High pressure manometer -Demand valve with: integrated warning device -Thread connection: M 45 x 3

High-frequency ignition device, heating, gas and oil burners -Type: E4718/54 -Dimensions: 85/70/H40 mm -Price: per piece -Number: 12x available -Weight: 0.3 kg/piece

resistance, wire potentiometer, resistor -Types see pictures -Price: complete -Number of packages: 2 -Weight: 1 kg

Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 9 mm -Length: 24.6 m -for: electric wire rope hoist -Also other crane ropes: available -Weight: 6.65 kg

Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 7 mm -Length: 18 m -for: electric wire rope hoist -Also other crane ropes: available -Weight: 3.8 kg

Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 6 mm -Length: 18.7 m -for: electric wire rope hoist -Also other crane ropes: available -Weight: 3 kg

Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 6 mm -Length: 24.3 m -for: electric wire rope hoist -Also other crane ropes: available -Weight: 3.9 kg

Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 6 mm -Length: 20 m -for: electric wire rope hoist -Also other crane ropes: available -Weight: 3.2 kg

Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 7 mm -Length: 22.6 m -for: electric wire rope hoist -Also other crane ropes: available -Weight: 4.75 kg

Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 7 mm -Length: 19.7 m -for: electric wire rope hoist -Also other crane ropes: available -Weight: 4.15 kg

Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 8 mm -Length: 75.4 m -for: electric wire rope hoist -Also other crane ropes: available -Price: per piece -Number: 2 pieces -Weight: 19 kg/piece

Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 9 mm -Length: 24 m -for: electric wire rope hoist -Also other crane ropes: available -Weight: 6.5 kg

Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 9 mm -Length: 22.5 m -for: electric wire rope hoist -Also other crane ropes: available -Weight: 6.1 kg

Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 9 mm -Length: 23 m -for: electric wire rope hoist -Also other crane ropes: available -Weight: 6.2 kg

Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 9 mm -Length: 42.9 m -for: electric wire rope hoist -Also other crane ropes: available -Weight: 11.6 kg

Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 9 mm -Length: 19.26 m -for: electric wire rope hoist -Also other crane ropes: available -Weight: 5.2 kg

Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 9 mm -Length: 36.6 m -for: electric wire rope hoist -Also other crane ropes: available -Weight: 9.9 kg

Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 9 mm -Length: 23.8 m -for: electric wire rope hoist -Also other crane ropes: available -Weight: 6.45 kg

Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 10 mm -Length: 24.7 m -for: electric wire rope hoist -Also other crane ropes: available -Price: per piece -Number: 2 pieces -Weight: 8.9 kg/piece

Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 10 mm -Length: 31.5 m -for: electric wire rope hoist -Also other crane ropes: available -Weight: 11.35 kg

Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 10 mm -Length: 5 m -for: electric wire rope hoist -Also other crane ropes: available -Price: per piece -Number: 6 pieces -Weight: 1.81 kg

Key data: 300 , 1 , 1300

Payload 1000 - 1250 kg Band width 305 and 505 mm Spreading range - 375 -520 mm Coil outer diameter 1300 mm without cabinet and control

Gear motor, electric motor -Speed: 90 rpm -Power: 1.1 kW -Construction: B5 -Shaft diameter: Ø 30 mm -Protection class: IP 33 -Dimensions: 500/220/H240 mm -Weight: 27 kg

complete 230kW

Quick-change tool holder, tool holder head, quick-change tool holder -Recording dimensions: see photos -Dimensions: 133/55/H113 mm -Weight: 2.8 kg

Edge milling machine, edge milling device, chamfering machine, mobile milling machine, weld edge former, weld edge former, weld preparation, weld edge forming machine, deburring device, deburring machine -Edge milling: 0 - 3 mm -Drive: 0.45 kW -Angle: adjustable -Dimensions: 485/345/H250 mm -Weight: 18.2 kg

Double coiler, coiler, decoiler, for sheet metal processing, punch, eccentric press, hydraulic press, punching machine -Handover in the current condition as seen -Drive: without -Max. Recording: Ø 590 mm -min Recording: Ø 250 mm - Recording width: 300 mm -Dimensions: 1460/1000/H1400 mm -Weight: 332 kg