dr boy used for sale

Stock # U2471-1 Used horizontal vacuum paddle dryer by Drais (DE) model TR100. Contact parts designed in duplex stainless steel (AISI 1.4462). Drying chamber has internal dimensions: diameter 500 mm x length 595 mm. Total volume of chamber about 117 l. Drying chamber is designed for work on pressure range from -0,98 bar / 63 bar. Test pressure - 83,9 bar. Working temperature up to 220 C. Side walls and front door are jacketed. Total volume of jacket 24 l, working pressure 5 bar, temperature up to 220 C. Chamber doors are mounted on moveable arm and are bolted on 18 clamps. Inside drying chamber there is single shaft with 4 welded ploughs. Shaft is belt driven by gearbox and el motor 18,5 kW, 1470 rpm, 400 V, 50 Hz in Ex design (EExdeIICT4). Top feeding inlet with diameter 200 mm, central bottom discharge with manually operated valve with diameter 100 mm. Machine is mounted on carbon s ...

2x Wood drying chamber dry chamber energy saving system 606 economy It is run until 2018. The heating system can be purchased in addition - wood chips with 400 KW heating capacity and boiler , etc. - Same year of construction. The solar system/panels on top can also be purchased. Find more here - / Contact us at -

Self-propelled Multifunctional Amphibious dredging/digging equipment Multifunctional Amphibious PRIENAI is new SAND PUMS and floating pipelines These dredging/digging equipment can also be dismantled into separate sections and transportet by land. The equipment can work both on land and in water. SELF-PROPELLED MULTIFUNCTIONAL AMPHIBIOUS DREDGING/DIGGING EQUIPMENT 1. Self-propelled Multifunctional Amphibious dredging/digging equipment: 2.1. Self-propelled Multifunctional Amphibious 1 2.2. Self-propelled Multifunctional Amphibious 2 2. Additional equipment for Multifunctional Amphibious dredging/digging equipment: 2.1. Sand pump 2.2. Bucket 2.3. Grab 2.4. The self-floating hose Equipment Date of Built – 2021/2022 Certificated By RINA. 1. SELF-PROPELLED MULTIFUNCTIONAL AMPHIBIOUS DREDGING/DIGGING EQUIPMENT Basic descriptions: Overall Length – 12,9 m. Moulded Breadt ...

Self-propelled Multifunctional Amphibious dredging/digging equipment Multifunctional Amphibious ALYTUS was operated for up to 400 hours – (Registered in the Lithuanian register) SAND PUMS and floating pipelines These dredging/digging equipment can also be dismantled into separate sections and transportet by land. The equipment can work both on land and in water. SELF-PROPELLED MULTIFUNCTIONAL AMPHIBIOUS DREDGING/DIGGING EQUIPMENT 1. Self-propelled Multifunctional Amphibious dredging/digging equipment: 2.1. Self-propelled Multifunctional Amphibious 1 2.2. Self-propelled Multifunctional Amphibious 2 2. Additional equipment for Multifunctional Amphibious dredging/digging equipment: 2.1. Sand pump 2.2. Bucket 2.3. Grab 2.4. The self-floating hose Equipment Date of Built – 2021/2022 Certificated By RINA. 1. SELF-PROPELLED MULTIFUNCTIONAL AMPHIBIOUS DREDGING/DIGGING EQUIP ...

Standard equipment: Tapping device Control panel with OLED display Robust, high-quality drill head hood with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drilling depth stop Stepless speed control via central rotary knob EMERGENCY STOP push button Thermal overload protection Spindle stop Drilling protection with electr. Hedge Connection cable with Schuko plug 3-year warranty for single-shift operation Continuous/normal drilling capacity (mm) 6/8 (in E335/ST60) Tapping capacity (pitch dependent) M5 Spindle B12 Drilling depth (mm) 60 Projection (mm) 220 Column diameter (mm) 70 Usable work surface (W x L) (mm) 300 x 250 T-slot size (arm), spacing (mm), dimension width (mm) Cross grooves, number 2, 14/26 Drill head height adjustment by hand Feed (mm/revolution) by hand Drilling depth stop ring (positive fit) Drilling depth indicator digi ...

Manufacturer: Venyeskob Bandpalettentrockner 5500/24, Type: Ven Dry Vertcal Bandpalettentrockner 5500/24/2-Zonen, Year: 2020, Control: Venyeskob, Work piece width min-max mm: 1300, Min.-max. workpiece length in mm: 400-5500, Min.-max. workpiece height in mm: 110, Working widht max mm: 1300, Number of pallets: 24, Palettenausmass LxBxH mm: 6100 X 1500, Lichte weite Paletten: 200, Tragfähigkeit Palette kg: 250, Palettenausmass LxBxH mm: 6100 X 1500, Heizmedium Warwasser: yes, Year :2020

BIG adapter Kramer large on three-point,  with adjustable lower link jaw hooks and detachable drawbar, Own weight approx. 190 kg, KAT 3

Manufacturer: Purete Purete LED Easy Dry PRT-U1513 , Type: PRT-U1113X, Work piece width min-max mm: 1320, Min.-max. workpiece length in mm: 300, Min.-max. workpiece height in mm: 2 - 80, Number of lamps: 1, kW power 1 lamp: 3,78, Reflektor von oben abnehmbar: yes, Gesamtlänge UV Modul mm: no, Adjustable: 38,7, Elektronische Leistungregelung: 1.200, Leistung Abluftventilator kw: 1,2, Feeding speed m/min: yes, Damper register - items: 5, Heating battery: 1.200x1.850x1.750,

Manufacturer: Gannomat, Type: Super Drill, Control: hand, Drilling engine kW: 2,2, Working range max mm: 120, Drilling beam swivel-mounted: yes, Lochraster: 32, Spindelanzahl 1: 19, Swivel pneumatically 90-45°: yes, Work piece support: yes, Work stations: 1, Foot switch: yes, Max. drilling depth in mm: 80, Max. drilling height in mm: 80,

min-max hoogte: 10 gt; 450 mm min-max breedte: 60 gt; 1050 mm cap: 400 kg/m maximaal positioneringsgewicht: 9 ton Vacon 110 CNC-besturing Voortman VB1250 lintzaag gt; cap: 500 x 1250 mm gt; versteksnede +/- 60°: 500 x 1000 mm gt; versteksnede +/- 45°: 500 x 850 mm gt; versteksnede -30°: 500 x 500 mm gt; zaagsnelheid: 40 gt; 120 m/min gt; vermogen: 7,5 kW gt; Afmetingen lintzaag: 11.000 x 54 x 1,6 mm Voortman 630 boorunit gt; boordiameter: 8/40 mm gt; draadtappen: M8/M24 gt; profielhoogtemeting inbegrepen gt; middelpuntmarkering inbegrepen gt; boorsnelheid: 0 gt; 2000 tpm gt; automatische gereedschapswisselaar: VTC 5/40 - 1x 5 posities gt; spindel: SK40 Hydraulisch aggregaat gt; 4kW - 160 bar

Two identical Drytee drying machines are available. Useful chamber dimensions X/Y/Z: 700mm/1400mm/1150mm, external dimensions X/Y/Z: approx. 1350mm/1600mm/1800mm, heating capacity: 36kW, operating temperature: 90°C, heating medium: thermal oil, heating medium temperature: 140°C, air circulation rate: 3x5200m³/h. Documentation available. On-site inspection is possible.

Plastic Dryer - Wittmann Drymax D60-150-M (2 pcs.) Year of Make: 2011 Description: Dryer with 2 molecular sieves, 1-silo Silo capacities: 150 l Sieves work alternately, during the drying process, one sieve works and the second sieve regenerates Hermetically insulated silo Dryer with Wittmann Feedmax S3-40 suction conveyor All offered peripherals are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Plastic Dryer - Wittmann Drymax Primus E60-150-M (2 pcs.) Year of Make: 2016 Description: Dryer with 2 molecular sieves, 1-silo Silo capacities: 150 l Sieves work alternately, during the drying process, one sieve works and the second sieve regenerates Hermetically insulated silo Dryer with Wittmann Feedmax S3-Net suction conveyor Price: On request All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź.

DRY PELLETIZER FOR PVC AND COMPOUNDS Suitable for extruders with production rate up to 200 kg/h, made in sturdy steel and mounted on a frame equipped with wheels for easy disassembly, granulating chamber in horizontal axis, built in stainless steel, quick opening safety device, knife-holder with fluctuating star to reduce knives consumption., self adjusting knives to nozzle by means of a slide system which keeps knives pressed on the die, reducing wear 2,2 kw drive, 3.000 rpm with extra strong bearing and long shaft, cutting die in anti-wear steel with number and Ø of holes bespoke to project. 1,5 kw Venturi blowing system + pipes and cyclone, n.2 thermoregulation areas, knife mounting template, electric cabinet and touch screen control board with modem for remote assistance, 3 mt.cable machine/panel, flange built to design to fit your extruder, heated by ceramic heating elements , temp ...

AIR DRYING TUNNEL, for strands, dimensions 2.000 x 300 mm. (or bespoke), blower on bottom with 2 conveyors which send air through slits, constructed in AISI304 stainless steel

CENTRIFUGAL DRYER for pellets (to go with an existing pelletizer), for a 350/400 kg/h capacity of PE PP ABS PS PC flakes, made of sturdy AISI304 stainless steel with vertical axis, driven by a 2.2 kW 3 Ph.asynchronous motor,, complete with soundproofed discharge cyclone, stainless steel tank for water recovery and recycling, 1.1 kW water ump,, equipped with drainage for overflowing, HEAT EXCHANGER GROUP, made of painted carbon steel, internal copper tube bundle, with removable head to facilitate cleaning, fixed to the tank using brackets, float with water replenishment valve, Electrical board of machine wiring, Users manual, CE compliance, installed power - used power in work: about 60-65% : 2.2, conditions: new machine, type: for granulate - this machine goes after the pelletizer, capacity: 300-450 kg/h

Plastic Dryer - Wittmann Drymax Primus E60-150-M (2 pcs.) Year of Make: 2016 Location: Lodz, Poland Description: Dryer with 2 molecular sieves, 1-silo Silo capacities: 150 l Sieves work alternately, during the drying process, one sieve works and the second sieve regenerates Hermetically insulated silo Dryer with Wittmann Feedmax S3-Net suction conveyor Price: On request

Plastic dryer - Wittmann Drymax E30-70-M / Very good technical condition Year of Make: 2015 Location: Lodz, Poland Description: Dryer with 2 molecular sieves, 1-silo Silo capacities: 150 kg Sieves work alternately, during the drying process, one sieve works and the second sieve regenerates Hermetically insulated silo Dryer with Wittmann suction conveyor Price: On request

Plastic Dryer - Wittmann Drymax D60-150-M (2 pcs.) Year of Make: 2011 Location: Lodz, Poland Description: Dryer with 2 molecular sieves, 1-silo Silo capacities: 150 l Sieves work alternately, during the drying process, one sieve works and the second sieve regenerates Hermetically insulated silo Dryer with Wittmann Feedmax S3-40 suction conveyor Price: On request

Manufacturer: ECOMATION Model: ECOBIO V Vacuum Dryer Year of Manufacture: 2017 Hours Used: Approx. 2500 h, vacuum pump

bore capacity in steel (diameter): 45 mm quill stroke: 125 mm : 560 mm : 230 mm table surface area: 800 x 240 mm spindle turning speed range: 75 - 3200 U/min max. milling cutter diameter: 80 mm spindle taper: ISO 30 max. distance between table and spindle-nose: 460 mm throat: 230 mm connected load frequency: 400 V total power requirement: 1,5 kW weight of the machine ca.: 580 Kg dimensions of the machine ca.: 1,2 x 1,0 x 2,1 m Equipment: All axes with 3-digital display. Quill travel has separate digit display. Automatic feed in X-axis and quill. Motorized Z-axis. tapping device. coolant system. machine base. Collet set, SK tool holder. Further machine accessories in box. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU329T1341 LocationBarneveld MakeAzbil Telstar Technologies TypeLyoAlfa 15-55 No.3392 Year of construction2016 Main Features MaterialStainless steel Surface0.48 m2 Specified Features - Freeze dryer Freeze dryercheck Cooling surface0,48 m² Plate sizesdia. 300 mm (not delivered) With cooling compressorcheck MakePfeiffer Vacuum TypeDUO 10M CapacityS(N₂): max. 12 m³/h Cooling mediumR-507a Motor0,45 kW 100-110/200-230 Volt MaterialStainless steel 1.4401 (316), Stainless steel 1.4404 Information With switchcheck Weight240 kg Floorspace0,7x0,76 m Total height1,1 m Extra SpecificationsIce condenser capacity: 22 kg Final condenser temperature: -55 °C Number of compressors: 1 Base unit weight: 190 kg Total power: 3,2 kW Freeze dryersTelstar TechnologiesDryers > Freeze dryersBrand > Telstar Technologies What you can expect from Foeth: -- Machine is in workin ...

General SKU201W009 LocationBarneveld MakeGEA Niro Pharma systems TypeMultiprocessor No.02563.0010 Year of construction2003 Pressure Sprayercheck Main Features MaterialStainless steel Volume12 Ltr. Motor11 KW Specified Features - Fluid bed dryer batch Fluidbeddryercheck Coatercheck Granulatorcheck With pancheck Capacity6 and 12 litre Pan sizesDia 120x480 mm and Dia 170x280 mm With pumpcheck Can be heated by steamcheck With fancheck Capacity580 m3/h Motor11 kW (400V Ex) With dust filtercheck Cleaning with air pulsecheck MaterialStainless steel 1.4301 (304), Stainless steel 1.4404 (316L) Information CEcheck With switchgearcheck ATEX compatiblecheck Extra Specifications- Complete technical file (total 21 folders) - Complete system, including heating system, filters, control valves - Can be used in cleanroom Fluid bed dryers batchGEA NiroDryers > Fluid bed dry ...

General SKU300P652 LocationBarneveld MakeNauta Vometec Mikropul Type12 HP 4 TRL BV No.2107500038 Year of construction2000 Main Features MaterialStainless steel Specified Features - Fluid bed dryer batch Fluidbeddryercheck Pan sizesdia. 400mm Bottom dischargecheck With sprayercheck Without fancheck With dust filtercheck Filter surface3.6 m2 Cleaning with air pulsecheck MaterialStainless steel Information Floorspace2,0x1,6 M Total height3,5 M Weight1000 KgFluid bed dryers batchHosokawa MikropulDryers > Fluid bed dryers batchBrand > Hosokawa Mikropul What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU212W134 LocationBarneveld MakeTricom Frimafa SWM Typeschudbed VFB 10./3 No.00064-01 Year of construction2000 Main Features MaterialStainless steel Motor22 KW Surface9.36 m2 Specified Features - Fluid bed dryer continuous Continuous fluidbed dryercheck Surface9,36 m² Bed sizes7800x1200 mm Product inletDia. 1000 mm and 600 mm Product outletDia. 600 mm (3x) Number of sections:1 Air inletcheck Air outletcheck Vibro motor2x Motorcheck With fan3x A&N, type CHAE 4-170 and CMBF 400 Motor15+22+22 kW, 400/690 volt With dust filtercheck MaterialStainless steel 1.4301 (304) Information Total height2,60 m Weight6170 kg Floorspace8,50x1,80 m Extra SpecificationsWith filter installation, 3x fan, total dimensions 6200x2300 mm, height 2820 mm, with inlet and outlet.The filter unit is equipped with 2 heat exchangers.Fluid bed dryers continuousTricom FrimafraDryer ...

General SKU354T960 LocationBarneveld MakeClima Temperatur Systeme TypeC+10/350/S No.007147 Year of construction2001 Pressure Working pressure25 Bar Main Features MaterialStainless steel Volume338 Ltr. Max.temp.90 °C Specified Features - Drying oven Climate boxcheck Temperature Test Chambers Max. temperature90 °C Capacity338 Ltr, (quantity: 0,9 kg) Internal width645 mm Internal depth710 mm Internal height740 mm Steam heatingcheck Electric capacity3,2 kW Number of doors:1 With air circulationcheck With fancheck With trayscheck MaterialStainless steel Information Total height1,9 m Weight400 kg CEcheck Floorspace0,85x1,7 m Extra SpecificationsTemp. bereik: 10-90 °C Vochtigheidsbereik: 10-95%rF Dauwpunt vereist 1: 5-89 °C Dauwpunt vereist 2: -19-5 °C Drying ovensCTS Clima Temperatur HechingenDryers > Drying ovensBrand > CTS Clima Temperatur Hechingen What ...

General SKU354T961 LocationBarneveld MakeKühner AG TypeISF-1-V No.937001.18 Main Features MaterialStainless steel Volume350 Ltr. Max.temp.60 °C Specified Features - Drying oven Climate boxcheck Max. temperature-15/60 °C. Number of compartments:1 Capacity350 Ltr. Internal width935 mm Internal depth631 mm Internal height471 mm Electric heatingcheck Electric capacity0,5 kW Number of doors:1 With air circulationcheck 240 m³/h With cooling compressorcheck With trays1 MaterialStainless steel Information Mounted on framecheck Floorspace1,3x0,8 m Total height1,5 m Weight350 kg Extra Specificationswith shaker unit Drying ovensKühner AGDryers > Drying ovensBrand > Kühner AG What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the  ...

General SKU254P358 LocationBarneveld MakeGlatt Process Technology GmbH (DE) TypeGPCG 5 SC No.6778 Year of construction1999 Main Features MaterialStainless steel Volume100 Ltr. Motor18.5 KW Specified Features - Fluid bed dryer batch Fluidbeddryercheck Coatercheck Granulatorcheck With pancheck Capacity100 ltr Bottom dischargecheck Capacity5 KG (granulation) / 20 KG (coating) With sprayercheck With Wurster-pan18 Can be heated by steamcheck With fancheck Capacity750 m3/h Motor18,5 kW, 400 Volt With dust filtercheck Cleaning with air pulsecheck MaterialStainless steel 1.4404, Stainless steel 1.4435 (316L) Information With switchgearcheck Floorspace2,0x2,0 M Total height7,3 M Extra SpecificationsGlatt con.zeef GS 100, motor capacity 1,1 KW, n=200-1000 rpm. Equipped with one granulation vessel for top-spray agglomeration of powders and one Wurster coating vessel ...

General SKU300U577 LocationBarneveld MakeFeutron Klimasimulation GmbH TypeKlimaprüfkammer KPK 400 No.004 Year of construction2002 Main Features MaterialStainless steel Volume400 Ltr. Max.temp.100 °C Specified Features - Drying oven Drying ovencheck Climate boxcheck Max. temperature+5/100 °C Capacity400 Ltr. Internal width720 mm Internal depth620mm Internal height860 mm Electric heatingcheck Electric capacity6,3 kW Number of doors:1 With air circulationcheck With fancheck Motor0,18 kW 220/230 Volt With air humidificationcheck With cooling compressorcheck With trayscheck (3x) MaterialStainless steel 1.4301 (304) Information With switchcheck Weight600 kg CEcheck Floorspace1,2x1,4 m Total height2,3 m Extra SpecificationsClimate Range: 10…95 °CTemperature Tolerance: (0.2…0.5)KHumidity Range: 10…98% relative humidityHumidity Tolerance: (2…3)% rel ...

General SKU227K088 LocationBarneveld MakeItalvacuum Borgaro Torino TypeRBGS-3000 No.2825 Year of construction1991 Pressure Vacuum possiblecheck Main Features MaterialStainless steel Volume1200 Ltr. Specified Features - Tumbler dryer Capacity1200 Ltr Diameter1550mm Cylindrical length450mm Conical length850mm Inlet/manhole dia. 450mm Outletdia. 350mm With jacketcheck Motor0,47/0,95 KW, 380 Volt (Ex) With variable speed drivecheck With lump breaker(2x) MaterialStainless steel 1.4401 (316) Information Floorspace4,5x3,0 M Total height4,5 M Weight4200 KG ATEX compatiblecheckTumbler dryersItalvacuumDryers > Tumbler dryersBrand > Italvacuum What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. P ...

General SKUR0155 LocationBarneveld MakePink GmbH Thermosysteme Wertheim (DE) TypeVSD-e 300-300-120-2 Machine number2008 4823 Pressure Working pressure0.1 Bar Vacuum possiblecheck Main Features MaterialHastelloy Volume35 Ltr. Surface0.18 m2 Specified Features - Tray dryer Tray dryervacuum Stainless steel housingcheck Stainless steel trayscheck Heating surface0.18 m2 Drying chamber capacity35 Ltr Max. temperature150 degr. C Number of trays2 Tray sizes300x300mm Distance between the trays120mm Max. temperature150 degr.C. With 1 doorcheck Connection for the vacuum pumpDN25 Connections(2x) DN10 Without vacuum pumpcheck MaterialStainless steel 2.4602 (Hastelloy C-22) Information Year of construction2008 Mounted on framecheck With switchgearcheck Floorspace2.2x1,0 M CEcheck Total height2,4 M Weight1150 Kg Extra Specificationsin Pink Isolator, Type ISO 1900-7 ...

General SKU440W1451 LocationBarneveld MakeChrist TypeEpsilon 2-12D No.12303 Year of construction2006 Main Features MaterialStainless steel Surface0.95 m2 Specified Features - Freeze dryer Freeze dryercheck Cooling surface0,95 m2 Number of plates6 Plate sizes350x450 mm Between the plates85 mm With condensercheck Condenser capacity2x 11,8 l. With cooling compressorcheck Make2x Bitzer TypeS4T-52Y-40P No.1669205890 Year of construction2005 Capacity2x 19,7 m3 Cooling mediumIsceon 89 Motor380-420 volt, 1450 rpm MaterialStainless steel Information Mounted on framecheck With switchcheck Weight850 kg CEcheck Floorspace1,55x1,40 m Total height1,90 m8 Extra SpecificationsWith vacuum pump, control, computersFreeze dryersChristDryers > Freeze dryersBrand > Christ What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new ...

General SKU224X119 LocationBarneveld MakeGlatt GmbH TypeGPCG 15 No.6534 Year of construction1998 Main Features MaterialStainless steel Volume45 Ltr. Motor7.5 KW Specified Features - Fluid bed dryer batch Fluidbeddryercheck Granulatorcheck With pan mounted on wheelscheck Capacity45 l. Pan sizesø 350 x 286 mm With pumpcheck type: 2051.REx V/168, 0,5l/min Motor0,12 kW 380V (EExe II T3) Can be heated by steamcheck With fancheck Capacity1000 m³/h Motor7,5kW 400V 2880 rpm With dust filtercheck (inlet, outlet and inside filter) Filter surface2x 1,1m² MaterialStainless steel 1.4301 (304) Information Total height7,6 m Weight2500 kg Floorspace3,1 x 3,5 m Extra SpecificationsMachine volume: 1.2 m³ Product contact surfaces: 3.86 m³ With hydraulic unit type: BHT 30, 70 bar. Filter types: Prefilter type: FP 85 HT Filter size: 610/610 Afterfilter type: 3CPM-HT-S2G-12 ...

General SKU409X1232 LocationBarneveld MakeBeltron TypeUV-Trockner BE 20 / 120 W / II No.0130128 Year of construction2018 Dimensions Belt width220 mm Belt length1050 mm Information Mounted on mild steel framecheck and wheels With switchcheck Weight150 kg CEcheck Floorspace1,10x1,10 m Total height1,37 m Extra SpecificationsType: :UV continuous conveyor dryer Lamp type: :2 × medium-pressure mercury lamps Lamp power: :Max. 120 W/cm Conveyor speed: :0.5 – 12 m/min (variable) (motor: 5 kW) Adjustable lamp height: :20 – 150 mm Cooling: :Forced-air, central exhaust fan Operating temperature: :19 – 23 °C Exhaust connection: :To outdoor vent, max. 7 m duct Additional information: Siemens touchscreen control, type :Simatic HMI Exhaust fan: :0.14 kW, :2550 rpm, airflow :10.1 m³/minBelt dryersBeltron GmbHDryers > Belt dryersBrand > Beltron GmbH What you can ex ...

Offered is a rapid radial/column drilling machine. Drilling capacity: up to approx. Ø50mm. Speed range: 58-1275rpm. Thread cutting device: available, outreach: 920mm, machine lamp: available, baseplate/table size X/Y: approx. 1100mm/400mm, T-slots: 2 at the rear left, motor power: approx. 1.5kW without coolant system, machine weight: approx. 1200kg. Inspection under power by arrangement possible.

- Producer Venjakob - Type VEN DRY OIR 38/40 - Year of construction 2013 - Working width 1.300 mm - Working height 940 + - 20 mm - Length of flash off tunnel 3.800 mm - Fresh air 100 m³/h - Exit air ~ 500 - 1000 m³/h - Circulation air ~ 3.000 m³/h - Drying temperature ~ 30 Grad - Air speed 0,5 - 2 m/s - IR-tube emitter 12 Stk. - Power IR tube emitter 12 x 1,5 kW - Transport belttransport - Length 4.000 mm - Location, in stock - Voltage / HZ 400/50 - Voltage fluctuation max. +/- 5 % - control cabinet with Touch-Screen mit neuer Siemens Steuerung 1 Stk.

with light barriers in the infeed area, the dryer only switches on when parts are detected by the light barrier, otherwise the dryer is in energy-saving standby mode with almost closed mirror halves. The cooling fan is frequency controlled and is controlled by temperature sensors. Operation via a Siemens panel. - Producer Venjakob - Type VEN DRY UV Surround - Year of construction 2012 - Standby operation % - Working width 1.300 mm - Operationside left - Number of lamp from top 1 Stk. - For mercury lamps - For edge drying - Electic capacity lamp 120 W/cm - Electic capacity lamp infinitely variable 50 - 120 W/cm - Length belt conveyor - Fan, exhaust air regalbar bis max. 3.200 m³/h - Feed speed adjustable 2,5 - 7,5 m/min - Length 2.000 mm - Width 2.700 mm - Total connection power ~ 22 kW - Location - Voltage / HZ 400/50

- Producer Venjakob - Type VEN DRY RZG - Working width 1300 mm - Max. part height 80 mm - Length of flash off tunnel 5000 mm - Volume flow air 5000 m³/h - Heat output 82 kW - Drying temperature 45 Grad - Incl. heat exchanger 90/70 Grad - Transport belttransport 5.200 mm - Location, in stock - Voltage / HZ 400 / 50

Manufacturer: ESC Model: Continuous Dryer Perfecton S with UV Year of Manufacture: 2020 Technical Specifications Heating Chamber 80°C - Galvanized nozzle plate - Process fan: TRZ 250-3 - Indirect air intake from process room - Recirculated air volume: 3,400 m³/h at 510 Pa - RRH heating register: 18 kW at max. 80°C - Drive motor: 2.2 kW / B3 / 1,410 rpm / insulation class F - Length: 2,000 mm Cooling Chamber - Process fan: TRE 250-3 - Supply and exhaust air volume: 3,400 m³/h at 800 Pa - Stainless steel drip tray for process fan - Drive motor: 2.2 kW / B3 / 1,500 rpm / insulation class F - Without cooling register and refrigeration unit - Length: 2,000 mm Discharge Element - Steel drive roller with rubber coating - Mounting for belt drive - Length: 500 mm Construction Details - All hoods and cladding panels made of electrolytically galvanized steel sheet - Heating chamber h ...

Amut Vertical centrifugal dryer under efurbishing, mm.400 rotor diameter,, length mm.1.900 mm.,, 120 mm.long paddles on the whole length,, AISI 304 steel basket from diam.mm.650,, height : 1.975 mm., mm.3,0 holes,, self-cleaning system through water sprays., Rolling type bearings., 55 kw, 1.550 tpm engine., About 1.000 kg./hr. with film and depending on material and water content, Construction year 1998., Machine is offered totally reconditioned, feeding auger and discharging cyclon can be quoted on request, See how a similar machine was refurbished, [here](.germanplast/pages/photo-gallery#&gid=1&pid=2), installed power - used power in work: about 60-65% : 55 kW, availability: 5 weeks ca, options available: loading auger à discharging cyclon, capacity: 1.000 kg/h with film ,more with rigid plastics, depending on material and water %, conditions: refurbished, type: Vertical

Manufacturer: ESC Model: Continuous Dryer Perfecton S Year of Manufacture: 2021 Technical Specifications Heating Chamber 80°C - Galvanized nozzle plate - Process fan TRZ 250-3 - Indirect air intake from process room - Air circulation volume: 3,400 m³/h at 510 Pa - Electric heating register: 18 kW at max. 80°C - Drive motor: 2.2 kW / B3 / 1,410 rpm / ISO F - Length: 2,000 mm Cooling Chamber - Process fan TRE 250-3 - Supply and exhaust air volume: 3,400 m³/h at 800 Pa - Stainless steel drip tray for process fan - Drive motor: 2.2 kW / B3 / 1,500 rpm / ISO F - Without cooling register and chiller - Length: 2,000 mm Discharge Element - Rubber-coated steel drive roller - Mounting for belt drive - Length: 500 mm General Construction - All hoods and cladding panels made of electro-galvanized steel sheet - Heating chamber hoods are insulated DIMENSIONS - Belt width: 1,700 mm - B ...

Manufacturer: Trockenkammer Lauber /Mühlböck Wood Drying System Year of Manufacture: 2012 Type of Machine : Wood Drying System TECHNICAL DATA PER UNIT HOT WATER HEATING - Heating capacity: 283,800 kcal/h = 330 kW - Flow temperature: 95 °C - Water volume: 11 m³/h - Pressure loss: 3 mWS = 0.3 bar - Connections (supply/return): DN 50 / DN 50, PN10 SPRAY SYSTEM - Water consumption: 68 l/h - Temperature: T = +4 °C - Pressure: p = 3.0 bar - Connection: R 1/2" - Spray nozzles: 5 pcs FANS - Quantity: 10 pcs - Power per fan: 1.1 kW - Voltage: 400 V STACKING DIMENSIONS - Length (L): 2 × 6.0 m + 1.00 m - Width (W): 2 × 1.2 m + 1 × 0.2 m - Height (H): 3 × 1.2 m + 3 × 0.1 m GROSS STACKING VOLUME - 103.7 m³ TECHNICAL DATA PER CHAMBER HOT WATER HEATING - Heating capacity: 410 kW - Flow temperature: 95.0 °C - Water flow rate: 24 m³/h - Pressure loss: 3.0 mWS = 0.3 bar - Flow ...

General SKU430U1380 LocationBarneveld CEcheck MakeHOF Sonderanlagenbau GmbH Main Features MaterialStainless steel Surface0.74 m2 Specified Features - Freeze dryer Freeze dryercheck vacuum dryer Cooling surface0,74 m² Number of plates6 Plate sizes620x320 mm Between the plates120 mm With cooling compressorcheck Cooling mediumR404a MaterialStainless steel 1.4571 (316Ti) Information No.GT-26049 Year of construction2007 With switchgearcheck Floorspace2,7x1 m Total height2 m Weight2400 Extra SpecificationsVolume of the drying chamber: 340 L Pressure range of the drying chamber: -1 / +0.01 bar The freeze dryer is equipped with a vacuum pump: Brand: Pfeiffer Type: DUO 20M Volume: max 24m³/h Freeze dryersHof Vakuum- und KaltetechnikDryers > Freeze dryersBrand > Hof Vakuum- und Kaltetechnik What you can expect from Foeth: -- Machine is in working condition -- At a reduce ...

General SKU418W1320 MakeDe Dietrich LocationBarneveld TypeSR-250 Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket10 Bar Vacuum possible jacketcheck Main Features MaterialGlass Type of tumble dryerdrum-dryer Volume285 Ltr. Motor0.75 KW Specified Features - Tumbler dryer Double cone tumbler dryercheck Capacity285 Ltr Diameter772mm Cylindrical length344mm Conical length293/168mm Inlet/man hole dia. 400mm Outletdia. 200mm With jacketcheck (90 Ltr) Max. temperature-30/+200°C Motor0,75 KW, 400 Volt (Ex) MaterialGlass - Enamel (3009U) Information No.25394 Year of construction1997 Floorspace2,5x1,2 m Total height2,8 m Weight1700 kg Extra Specificationsthe vacuum arm inside is made of material 2.4951Tumbler dryersDe DietrichDryers > Tumbler dryersBrand > De Dietrich What you can expect from Foeth: -- Machine is in working condition --  ...

General SKU388X977 MakeZirbus TypeVTS 300 LocationBarneveld CEcheck Pressure Working pressure0 Bar Vacuum possiblecheck Main Features MaterialStainless steel Surface2 m2 Specified Features - Freeze dryer Freeze dryercheck Cooling surface2 m2 Number of plates2x 9 Plate sizes500x450 mm Between the plates15 mm With condensercheck With cooling compressor2x MakeTecumsek TypeTFHT2511Z BR Cooling mediumR452a MaterialStainless steel 1.4571 (316Ti) Information No.2152 (typeplate on cooling instalation) Year of construction2006 With switchcheck Floorspace0,85x1,45 m Total height1,85 m Weight400 kg Extra SpecificationsWith vacuum pump, type D25B, cap. 25 m³/hFreeze dryersZirbusDryers > Freeze dryersBrand > Zirbus What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide ...

General SKU422U1327 LocationBarneveld MakeBucher Guyer AG Pressure Vacuum possiblecheck Working pressure trays2 Bar Main Features MaterialStainless steel Volume5000 Ltr. Surface30 m2 Specified Features - Tray dryer Tray dryercheck Stainless steel housingcheck Stainless steel trayscheck Heating surface30m² Drying chamber capacity5 m3 Drying chamber sizes1991x2080x1420 mm Max. temperature110°C With jacketcheck Max. temperature100°C Number of trays11 Tray sizes1550x2000 mm Distance between the trays100 mm With 2 doorscheck Connection for the vacuum pumpcheck With vacuum pumpcheck Motor5,5kW, 400/690 Volt, 1455rpm MaterialStainless steel 1.4541 (321) Information TypeVTS D7 30m² Machine number5266/1-11 Year of construction2000 With switchgearcheck Floorspace3x2,6 m Total height2,6 m Weight6300 kg Extra SpecificationsOn top of the tray dryer, a heat ex ...

General SKU252X210 MakeBBA Innova TypeCCCL-16/40 No.V-110 Year of construction2001 LocationBarneveld Main Features MaterialStainless steel Specified Features - Roll dryer Roll dryercheck Roll coolercheck Double rollcheck Roll sizesDia. 130x400 mm Feeding with pouring gapcheck Motor230 volt With variable speed drivecheck Information With switchgearcheck Floorspace0,90x0,80 m Total height1,00 m Weight367 kg CEcheck Extra SpecificationsCompact Conti CoolerRoll dryersBBA InnovaDryers > Roll dryersBrand > BBA Innova What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

2 units and 1 large drying cabin made of stainless steel incl. piping, for gentle drying of food (herbs, tea, wheatgrass), low-temperature drying. Drying below 40°C, only permitted for indoor use. Very solidly built. Dimensions: Aggregates - 1.95 x 1.25 x 2.00 m, Drying cabin: 7.40 x 2.67 x 2.50 m, Stainless steel: 1.4301 Aggregate 1 : Built in 2012, Aggregate 2 : Built in 2014, Drying cab: Built in 2015. The Blue Evolution XL steam cleaning device from Beam can also be purchased. We will be happy to send you the data sheet. Price VB

compressor air refrigeration dryer air dryer Brand: KAESER TE141 Year of manufacture: 2013 Motor voltage Pgebmsyfpbtsrc H Dlsg 400V/50Hz 3 phases 4.5 a/min Max. pressure: 16.00 bar Delivery capacity 14.32 m3/min Operating pressure max: 16bar Refrigerant: R134A 2.1kg Air-cooled dryer Refrigeration dryer Connection: Compressed air G2 (internal thread) Connection: Condensate drain: DN10 Dimensions: Length: 1530mm Width: 1060mm Height: 1513mm Weight: 660

Year of construction 2013 Drying tower Ambaflex Belt width 40 cm Conveying length 20 m Inlet height approx. 50 cm Spout height approx. 120 cm Orientation 90° left Speed up to 13 m/min Delivery date: immediately Price on request. Worldwide Delivery & Installation