dr boy used for sale

Triangular notching tool, notching side knife, die holder, parting tool, punching tool, punch, punching die, punching die -Punching Tool: Angle Notching Tool -Remark: only counter knife, without release unit -Dimensions: 185/172/H95 mm -Weight: 9.3kg

Gear motor, electric motor -Speed: 56 rpm -Power: 0.37 kW -Construction: B3 angle -Diameter hollow shaft: Ø 24 mm -Brake: 220 V -Protection class: IP 54 -Price: per piece -Number: 3x available -Dimensions: 410/160/H235 mm -Weight: 14 kg

Perlmühle Drais PM 1 RL-V Explosion protected version Grinding tank 1.3 l Agitator power 2.5 kW with feed pump Revision in 2005 Very good condition, straight from production!

Perlmühle Drais PM 25 RL-V Explosion protected version Grinding tank 26 l Agitator power 24 kW with feed pump Very good condition, straight from production!

Complete gas measuring station, gas warning meter, Polytron IR Ex, Dräger, used Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Used! The part was purchased from a spare parts warehouse of a company, is in very good condition and fully functional. The complete gas measuring device is installed in a Rittal distribution cabinet and consists of: - Rittal distribution cabinet 60 x 30 x 80cm high - Air intake pump, IKS Group, 7006 VD 2,3/E/AC - Gas detector Dräger, Polytron IR Ex, - Brooks variable area flow meter 1355/... - Isolating amplifier Pepperl u Fuchs KFA6-SR2-Ex1.W - Circuit breaker and other accessories The air intake pump sucks in the air from the outdoor area and brings it to the Polytron gas detector Ensuring the function In order to ensure functionality, the buyer must inspect or put the goods into op ...

Electric motor, three-phase motor -Power: 5 kW -Speed: 2880 rpm -Shaft: Ø 24 mm -Construction: B5 -Protection class: IP 33 -Price: per piece -Number: 1x available -Dimensions: 390/310/H225 mm -Weight: 44 kg

Three-phase motor with 2 speeds, electric motor -Transfer in current condition as seen -Foot damaged, see photo -Power: 2.7/4.0 kW -Speed: 950/1440 rpm -Shaft: Ø 32 mm -Construction: B3 -pole changing -Protection class: -Dimensions: 480/320/H270 mm -Weight: 78 kg

Electric motor, three-phase motor -Motor is for a husband grinder -Electric motor: with 2 shaft outputs -Power: 4 kW -Speed: 960 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: IP 54 -Dimensions: 580/340/H260 mm -Weight: 75 kg

dreizler® dual-fuel burner in DUObloc version Operation infinitely variable modulating (gas and oil) CE certified and compliant with EN 676 gas burner with blower and EN 267 oil burner and the EU directives EU/2016/426 Gas Appliance Regulation and 2006/42/EC Machinery Directive Dual-fuel burner according to EN 676: • DUObloc version: fan separately on base frame with vibration damper, electric motor and fan wheel in sheet steel housing, with protective grille and compensator on the discharge port • Burner housing with gas/oil/air mixing device for the combustion of natural gas and liquefied petroleum gas and EL fuel oil, other liquid or gaseous fuels on request • Two-pole ignition transformer device for direct ignition of gas and oil flame • Flame monitoring via optical flame detector • Gas deficiency protection and air deficiency protection on the burner � ...

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 55 rpm -Power: 0.25 kW -Construction: B5/B14 -Diameter shaft: 25 mm -Protection class: IP 54 -Number: 2x motors available -Price: per piece -Dimensions: 440/140/H185 mm -Weight: 12.5 kg/piece

Wire electrode, aluminum welding wire, aluminum welding wire, aluminum-magnesium alloy welding rod -Net weight: 7 kg -Number: 2x package available -Price: per package -Weight complete: 7.6 kg/package

Wire electrode, welding wire, copper base MIG solid wire electrode for soldering copper, copper-silicon, copper-zinc alloys -Net weight: 10.9 kg -Number: 1x package available -Price: per package -Weight complete: 11.5 kg/package

Machine vise lower plate, clamping plate, vice plate, milling machine intermediate plate, turntable -with: T round groove -Dimensions: 270/240/H65 mm -Weight: 9.7 kg

Precious chocolates coating drum Stainless, 250l coating drum, variable speed, forward and reverse, on stainless frame, 1Ph

Machine vise lower plate, clamping plate, vice plate, milling machine intermediate plate, turntable -with: T round groove -Dimensions: 270/240/H90 mm -Weight: 13 kg

Machine vice base plate, clamping plate, vice plate, turntable -with: T-round groove -Dimensions: 330/240/H40 mm -Weight: 10kg

Precious chocolates coating drum Stainless, 250l coating drum, variable speed, forward and reverse, on stainless frame, 1Ph

diameter: 300 mm width: 200 mm height: 180 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 9 mm -Length: 28.7 m -for electric cable winch -other crane ropes are also available Price: per roll -Quantity: 2 rolls available -Weight: 10.5 kg/piece

Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 11 mm -Length: approx. 27 m -for electric cable winch -other crane ropes are also available -Weight: 15 kg

Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 15 mm -Length: approx. 25 m -for electric cable winch -other crane ropes are also available -Weight: 24 kg

Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 15 mm -Length: approx. 34 m -for electric cable winch -other crane ropes are also available -Weight: 36 kg

Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 12 mm -Length: approx. 25 m -for electric cable winch -other crane ropes are also available -Weight: 17 kg

Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 12 mm -Length: approx. 36 m -for electric cable winch -other crane ropes are also available -Weight: 18 kg

Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 16 mm -Length: approx. 22.8 m -for electric cable winch -other crane ropes are also available -Weight: 19 kg

Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 10 mm -Length: approx. 7 m -Stainless steel -for electric cable winch -other crane ropes are also available -Weight: 3 kg

Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 8 mm -Length: approx. 10 m -for electric cable winch -other crane ropes are also available -Weight: 3 kg

Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 15 mm -Length: 52.5 m -for electric cable winch -other crane ropes are also available -Weight: 55 kg

Winch rope, crane rope, hoist rope, wire rope -Wire rope Ø 14 mm -Length: approx. 45 m -Material: Stainless steel -for electric cable winch -other crane ropes are also available -Weight: 37 kg

Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 8 mm -Length: approx. 19 m -for electric cable winch -other crane ropes are also available -Weight: 4 kg

sheet width: 0500 mm coil outside dia.: 1400 mm weight max. in kg: 4000 kg plate thickness: 0,80 - 3,60 mm diam. of the rolls ca.: 80 mm feed rolls: 2 nomb. of straightening rolls: 7 exit pinch rolls: 2 speed: 5-30 m/min range of expansion ca.: 445 - 530 mm expansion: manuell total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Control conversion to SIEMENS S7 in 2012 - pneumatic pressure roller on the side - pneumatically ventilated feed roller - Straightening rollers manually adjustable - lateral belt guide at the inlet - Large roller basket at the outlet - Ultrasonic transmitter for loop control - Roller feed type 1125 D - Bandwidth max. 510 mm - Band thickness max. 6 mm with full width 5.50 mm - Roll diameter 125mm - Feed speed: max. 100 m/min. - pneumatically ventilated top roller - Lateral tape guide with digital display - Inlet roller basket  ...

Conveyor belt, belt conveyor, conveyor belt, belt conveyor -Conveyor belt: with automatic lifting and rotating device -Belt width: 2x 50 mm, length 2385 mm -Distance: 410 mm -Geared motor: Lenze 0.55 kW -Speed: 51-293 rpm -Belt speed: 11-65 m / min -Dimensions: 1265/815 / H740 mm -Weight: approx. 248 kg

Winch rope, crane rope, hoist rope, wire rope, stainless steel rope -Wire rope: Ø 5 mm -Length: 10 m -for: Electric cable winch -other crane ropes also available -Price: per piece -Quantity: 6 pieces -Weight: 1 kg/piece

Servo Driven Labeller Mfc.: Gernep Built: 2017 Overhauled in 2020 2 cold glue stations for back and front + neck label 1 format for Steinie 3 formats long neck and Appo 33 cl back - front - neck (1 format)

Gear motor, electric motor, electric gear motor, bevel gear motor -Manufacturer: SEW-Eurodrive, gear motor type K37 DR63L4/BR/TF -Speed: 19 rpm -Power: 0.25kw -Shaft: Ø 25 x 50 mm -Protection class: IP54 -Brake: 3.2 Nm -Dimensions: 450/230/H170 mm -Weight: 22 kg

Gear motor, electric motor, electric gear motor -Manufacturer: Watt Drive, gear motor type HG OKG 71N4 -Speed: 246 rpm -Power: 0.37kw -Torque: 14.4 Nm -Shaft: Ø 20 x 40 mm -Protection class: IP55 -Dimensions: 400/170/H210 mm -Weight: 15kg

Manual transmission, throttle grip, throttle lever, drive lever, control lever, direction lever for outboard motors, outboard motor, outboard engine, boat engine -Hand shift: Throttle grip, unfortunately without type designation -Dimensions: 650/180/190 mm -Weight: 1.4 kg

Key data: 550 mm

IMMEDIATELY AVAILABLE - video link on request CNC-controlled 3-axis sawing and drilling center for sophisticated production technology Encapsulated, compact machine - designed as a closed production island - no noise and no chips in the machine environment - large extraction connection for efficient chip extraction. (The machine is also supplied as a two-axis sawing center without drilling unit). Dimensionally accurate 90° saw cuts both in small series and in large series production. CNC control based on Windows® with touch screen and color screen, simple menu-driven programming with symbols, remote maintenance module. Absolutely burr-free precision sawing of all materials such as - aluminum - bronze - GRP (glass fiber reinforced plastics) - wood - copper - brass and various plastics such as PVC and polyamide. Drilling (through holes and blind holes – step drill ...

Key data: 550 mm

IMMEDIATELY AVAILABLE - video link on request KA 550 CNC-DRILL CNC-controlled 3-axis sawing and drilling center for sophisticated production technology Encapsulated, compact machine - designed as a closed production island - no noise and no chips in the machine environment - large extraction connection for efficient chip extraction. (The machine is also supplied as a two-axis sawing center without drilling unit). Dimensionally accurate 90° saw cuts both in small series and in large series production. CNC control based on Windows® with touch screen and color screen, simple menu-driven programming with symbols, remote maintenance module. Absolutely burr-free precision sawing of all materials such as - wood - aluminum - bronze - GRP (glass fiber reinforced plastics) - copper - brass and various plastics such as PVC and polyamide. Drilling (through holes and blind hole ...

Käser ASK 32 T with integrated cold dryer Screw compressor Age: 2008 Rated Output: 18.5 kW Max. working overpressure: 8 bar Motor speed: 2950 1/min Sigma Control Integrated refrigerant dryer

Slip ring, rotary joint, rotary transmitter, slip ring rotor, rotary head slip ring, column slip ring, slip ring transmitter -comes from: HUSS Rides, manufacturer of leisure facilities -with: rotary valve -for: Hydraulic oil 2x -for: Air 1x -for: electricity 11x

Gear motor, electric motor, electric gear motor -Manufacturer: SEW-Eurodrive, gear motor type SA37 DR63M4/TF/IS -Speed: 13 rpm -Power: 0.18 kW -Hollow shaft: Ø 20 x 100 mm -Protection class: IP55 -Dimensions: 340/180/H140 mm -Weight: 11 kg

Gear motor, electric motor, electric gear motor -Manufacturer: SEW-Eurodrive, gear motor type W20 DR63M4/TF/IS -Speed: 28 rpm -Power: 0.18kW -Shaft: Ø 20 x 40 mm -Protection class: IP55 -Dimensions: 300/180/H120 mm -Weight: 7.6 kg

Gear motor, electric motor, electric gear motor -Manufacturer: SEW-Eurodrive, geared motor -Type: KA37 DRN80M4/RS/TF/AL -Speed: 1435/24 rpm i= 58.60 -Power: 0.55 kW -Hollow shaft: Ø 30 x 120 mm -Protection rating: IP55 -Dimensions: 480/210/H170 mm -Weight: 22 kg

live center, live center point, live Morse taper, live center point, live lathe center, center point, centering taper -Manufacturer: Drehmeister, live center -Type: MK6 -Recording: MK6 -Dimensions: Ø 124 x 350 mm -Weight: 11.8 kg

DC motor, servo motor, gear motor, electric motor, DC gear motor, DC shunt gear motor -Manufacturer: Kählig, DC gear motor -Speed: 146 -Voltage: 160 V -Power: 300 W / 3000 rpm -technical data: see photo type plate -Shaft: Ø 16 x 27 mm -Dimensions: 320/120/H155mm -Weight: 10 kg

Heating, burner, gas burner, fan burner, gas fan burner -Manufacturer: Dreizler, fan burner type GE 200/300 AR 2 -Nominal heat output: 355 kW -Gas type: natural gas -Gas connection: 20 mbar -Blower motor: 0.37 kW -Dimension: 760/510/H535 mm -Weight: 33 kg

Filler, dosing computer terminal, dosing device, doser, compressed air vacuum control -Manufacturer: Hamatech, dosing device compressed air vacuum control -Type: unfortunately without type designation -Individual components: see photos -Dimensions: 330/245/H145mm -Weight: 4.8 kg

Saw blade, wood saw blade, circular saw blade -Manufacturer: Dress, saw blade HW -Type: Ø 420x4.0/3.2x30 Z96 TFP -Art. No.: 342031 -Speed: n max. 4500 rpm -Number: 4x saw blade available -Price: per piece -Dimensions box: / 430/430/H10 mm / / 430/430/H10 mm -Weight: 3.6 kg/piece