dp used for sale

; Gross weight [kg]: 1028; Engine: Perkins 1104C-44TAG2; Accessories: Tanker, Battery, Control Panel; Water Tank Volume [l]: 218

; Gross weight [kg]: 510; Engine: Kohler KDW1404; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 50

; Gross weight [kg]: 8600; Engine: Perkins 4006-23TAG3A; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A

; Gross weight [kg]: 532; Engine: Caterpillar C1.5; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 55

; Gross weight [kg]: 800; Engine: Perkins 403D-15; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 63A - 32A - 16A 5P - 16A 3P; Water Tank Volume [l]: 55

We sell a TRAK DPM 800 CNC milling machine in very good condition. Machine having been little used. DPM type 3 axes operating in MANUAL and CNC Machine stroke X 800 mm Y 420 mm Z 610 mm Table height 970 mm Table dimensions 1270 mm x 320 mm Feed rate of the X, Y, Z axes 5 - 2540 mm / min Manual feed speed Z axis 0-450mm / min Head tilt + 90 ° / -90 ° Spindle diameter 100 mm Manual spindle stroke 120 mm Spindle cone ISO 40 DIN 2080 M16 Spindle speed 70-3800 rpm Spindle power 3.75KW Drilling capacity 36 mm Milling capacity 80 cm3 / min Tapping capacity M30 Maximum weight on the table 600 Kg Integrated watering tank with 1CV / 60 liter pump Automatic centralized lubrication PROTOTRAK command Type AGE3 DC motor on X, Y, Z axis Digital display X, Y, Z Dialogue programming system RS 232 / CAD-CAM link To be taken on site, unpackaged. Exworks delivery

TRAK A.G.E. 3 Axis CNC Control, Table 1450 x 350mm Traverses XYZ: 31″ x 17″ x 23″ / 787 x 431 x 584 mm Quill Travel 127mm, Spindle Taper ISO40, Power Drawbar, Spindle Motor 5HP, Coolant. Year 1999 Condition: Very Good

Multisaw Edger FOD DPPA-II-50-E with lasers – production in Poland – DTR – fixed sleeve - cutting height 120 mm - cutting width 500 mm - engine power 30 kW - material width max 730 mm - four types of feed speed - power of the feed motor 4 kW - spindle diameter 55 mm - sleeve diameter 90 mm - electric disc spacing adjustment - fixed edging sleeve 60 mm - one movable shield - two rows of anti-recoil pawls - three lower pulling rollers - two upper pulling rollers - two lasers - shaft support Transport dimensions: 250x165x220 cm weight ~ 2000 kg Multisaws are machines used in the wood industry mainly for cutting prisms, but not only. Machines of this type can cut boards into smaller elements and cut lamellas. The principle of their operation is very simple, the machine has a spindle located in the central point, in the horizontal axis, on which tools in t ...

; Gross weight [kg]: 450; Engine: Kubota D1105-EF02; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 38

; Gross weight [kg]: 17500; Engine: Cummins KTA50-GS8; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 1000

; Gross weight [kg]: 778; Engine: Perkins 1103A-33G1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 71

; Gross weight [kg]: 778; Engine: Perkins 1103A-33TG2; Accessories: Tanker, Battery, Control Panel; Water Tank Volume [l]: 145

; Gross weight [kg]: 2900; Engine: Perkins 1206A-E70TTAG3; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 385

Multi-saw edger by FOD Bydgoszcz DPPA-II-50-E with electronic blade setting – Polish production – DTR – fixed sleeve – movable dial with the possibility of programming 8 fixed dimensions TECHNICAL PARAMETERS: - cutting height 120 mm - cutting width 500 mm - engine power 30 kW - material width max 730 mm - four types of feed speeds - feed motor power 4 kW - spindle diameter 55 mm - sleeve diameter 90 mm - electronic adjustment of disc spacing with programmable fixed dimensions - fixed edging sleeve 60 mm - one movable disc - two rows of anti-kickback pawls - three lower pulling rollers - two upper pulling rollers - two lasers - shaft support Transport dimensions: 270x165x220 cm weight ~ 2000 kg

NUMBER 60 POSITIONS

; Gross weight [kg]: 13683; Engine: Cummins KTA50-G23; Accessories: Battery, Control Panel, Cummins C2000D5B, Cummins KTA50-G23

; Gross weight [kg]: 13396; Engine: Cummins KTA50-G23; Accessories: Battery, Control Panel, Cummins C1875 D5, Cummins KTA50-G23

; Gross weight [kg]: 12692; Engine: Cummins KTA50-G23; Accessories: Tanker, Battery, Control Panel, Stahldach, Cummins C1760D5, Cummins KTA50-G23

Filling Machine Vemag DP 3, Vacuum Filling Machine, with rotary gear, new DHV (long version) incl. 4 filling tubes complete 14-20mm, Numerous other filling tubes, accessories, operating instructions, 2 sets of rotor blades, Top maintained machine, built in 2013, only 3831 operating hours, Connection 400V, 6kW, dimensions LxWxH approx. 75x88x175cm, weight approx. 445kg, very good used condition, fully functional Price without DHV with filling tubes 17.500,-€

; Gross weight [kg]: 1550; Engine: Deutz TD2.9L4-SV; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 250

Key data: 1800 mm, 3000 mm

Center width: 3000 mm Rotation diameter: 1800 mm above bed / 2800 mm above floor Workpiece weight: 8,000 kg max. Jaw chuck: Ø 1800 mm Speed range: 1.8 - 180 rpm. Spindle passage: 220 mm 3-Axis Digital Readout: Easson ES-14 Equipped with: - Motorized tailstock - Various tooling -Operating instructions Country of origin: Germany Engine power: 34 kW Machine weight: 21.000 kg

; Gross weight [kg]: 3100; Engine: Doosan P126TI-II; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 470

; Gross weight [kg]: 2985; Engine: Doosan P126TI; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 470

; Accessories: 20FT Generator Set Container, Outside dimensions: 606x244x259, Internal dimensions: 575x226x237 (door height 230 & door width 220)

pressure: 150 t stroke: 300 mm table surface area: 1070 x 290 mm working width: 1070 mm pressing speed: 5,0 mm/sec feed speeds: 9,0 mm/sec return speed: 10,0 mm/sec total power requirement: 11,0 kW weight of the machine ca.: 1,87 t dimensions of the machine ca.: 2,2 x 1,3 x 2,3 m - hydraulic workshop press with adjustable cylinder - Table height adjustment - V-block tool insert - Pressure gauge The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

; Gross weight [kg]: 19860; Engine: Perkins 4016-TAG2A; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 2000

; Gross weight [kg]: 6800; Engine: Perkins 4006-23TAG2A; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 1550

Description: Untested / defects cannot be excluded Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 1,200 mm, weight approx.: 720 kg

; Gross weight [kg]: 3800; Engine: Iveco CR13TE2A; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and battery charger, Including: sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 550

For sale is a Wacker Neuson DPU 6555, which is like new and has hardly been used. These medium-duty reversible vibratory plates offer high productivity due to their strong compaction force combined with fast supply and return. They are ideal for construction sites that place high demands on the performance of a device. The vibratory plates also offer outstanding properties in terms of durability and ease of use. They are ideally suited for the compaction of frost and base layers in road, path and parking lot construction as well as for backfilling buildings. With a frequency of 69 Hz, the medium-heavy, reversible vibratory plates can be used universally and reliably compact even medium- to heavy-duty composite stone pavement. Specifications: - Operating weight: 504 kg - Centrifugal force: 65 kN - Working width: 710 mm - Engine: Hatz (with electric starter and hour meter)

; Gross weight [kg]: 9613; Engine: Cummins KTA50-G3; Accessories: Battery, Control Panel, including exhaust system

; Gross weight [kg]: 12270; Engine: Perkins 4008TAG3; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 1450

; Gross weight [kg]: 495; Engine: Perkins 403A-15G2; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 55

; Gross weight [kg]: 5950; Engine: Doosan DP222LC; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 1000

Electrically operated piston pump,, semi-automatic,, a filling station,, was in use for salad dressing,, Filling volume: up to max. 200 ml per stroke,, moveable on rollers., power: up to approx. 400 bottles/hour, Dimensions / weight: L x W x H: 2,000 x 600 x 1,800 mm

; Power [PS]: 23; Gross weight [kg]: 660; Engine: Kohler KDI1903M/G15; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: coolant heater and battery charger; Water Tank Volume [l]: 50

; Power [PS]: 24; Gross weight [kg]: 580; Engine: Perkins 404D-22; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: coolant heater and battery charger; Water Tank Volume [l]: 55

; Gross weight [kg]: 965; Engine: Cummins X2.5G2; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 71

; Gross weight [kg]: 2273; Engine: Caterpillar C7.1; Accessories: Tanker, Battery, Control Panel, Stahldach

; Engine: Caterpillar C2.2; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 55

; Gross weight [kg]: 770

; Gross weight [kg]: 4000; Engine: Perkins 2206C-E13TAG2; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 450

Description: Power range: 2/3 HP 1.5/2.2 kW Speed range: 1450/2900 rpm Installed polishing wheel diameter: approx. 250 mm With replacement polishing wheels as shown in the pictures Approx. Onsite Dimension. (l x w x h): 1,090 x 600 x 1,320 mm, weight approx.: 250 kg

; Gross weight [kg]: 2220; Engine: Iveco NEF67TM7; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 390

; Gross weight [kg]: 6200; Engine: Doosan DP222CC; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 1500

; Gross weight [kg]: 1079; Engine: Cummins X2.5-G2; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 71

; Gross weight [kg]: 608; Engine: Caterpillar C2.2; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger

; Gross weight [kg]: 429; Engine: Perkins 404A-22G; Accessories: Tanker, Battery, Control Panel; Water Tank Volume [l]: 55

; Gross weight [kg]: 1350; Engine: Deutz TCD2.2L3; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 63A - 32A - 32A - 16A 3P - 16A 3P; Water Tank Volume [l]: 175