We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,106 used machines on RESALE, but how to find them? Machine Search
used
; Gross weight [kg]: 5071; Engine: Perkins 2506A-E15TAG2; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 888
used
; Gross weight [kg]: 6250; Engine: Doosan DP222LC; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 1250
used
; Gross weight [kg]: 8250; Engine: Cummins KTA38-G5; Accessories: Battery, Control Panel, Including : coolant heater and battery charger
used
; Gross weight [kg]: 16160; Engine: Cummins QSK60-G4; Accessories: Battery, Control Panel
used
; Gross weight [kg]: 14280; Engine: Cummins KTA38-G5; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger
used
Warranty:, 1 year for continuous use, 2 years for Stand by use; Gross weight [kg]: 5818; Engine: Cummins QSZ13-G5; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 888
used
Warranty:, 1 year for continuous use, 2 years for Stand by use; Gross weight [kg]: 4611; Engine: Cummins QSL9-G5; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 699
used
; Gross weight [kg]: 4744; Engine: Cummins NT855 G6; Accessories: Tanker, Battery, Control Panel, Stahldach, including: coolant heater and battery charger
used
Can be taken away from our yard for Free., 0
used
; Gross weight [kg]: 5259; Engine: Volvo TWD1644GE; Accessories: Tanker, Battery, Control Panel, Stahldach, Inclucing: battery charger and coolant heater; Water Tank Volume [l]: 897
used
; Gross weight [kg]: 9780; Engine: `Perkins 4012-46TAG2A; Accessories: Tanker, Control Panel; Water Tank Volume [l]: 2000
used
diameter range 4-9 mm shaft length under head 100 mm cutting length 120 mm output pieces/min 100
used
Granulate Dryer Piovan Model: DPM615 SN: 01318TD01 Device in good conditiom. Machine store in warehouse in Poland , 55-300 Środa Śląska If needed any additional photos or videos or if you are planning visit to check our equipment you are welcome. Possible transport organization, transport cost covered by buyer. Contact person: Michał Pienio Production Manager UAP-2 marketing2.legnicafaurecia.com FAURECIA Legnica Decorations Plant, Interior Systems 180 Gniewomierz 59-241 Legnickie Pole – Poland M +48660719841 Faurecia Legnica Decorations S.A. . with its registered office in Legnica, address: at Gniewomierz 180 street, 59-241 Legnickie Pole, entered into the register of entrepreneurs of the Polish Court Register kept by the District Court for Wrocław-Fabryczna in Wrocław, IX Commercial Division of the National Court Register, under the KRS No 0000874432, ...
used
AIR JET COVERING MACHINES NUMBER 15 POSITIONS AUTODOFFING HEBERLEIN JET P 212 YEAR 2001 SUPERIOR CREEL OPTIONAL : 1) LATERAL CREEL 2) BLOWER AND VACUUM CLEANER
used
Piovan dryer with feeder and grinder. Type DPA50, C5, SN: 03218MR42. Good condition. Machine warehouse in warehouse in Poland, 55-300 Środa Śląska If necessary, additional photos or videos or if you are planning a visit to check our equipment, we invite you. Possible organization of transport, the cost of transport covered by the buyer. Person: Michal Pienio Production Manager UAP-2 marketing2.legnicafaurecia.com FAURECIA Legnica Decoration Plant, Interior Furnishings 180 Gniewomierz 59-241 Legnickie Pole – Poland M+48660719841 Faurecia Legnica Decorations S.A. . Gniewomierz 180, 59-241 Legnickie Pole, entered into the Register of Entrepreneurs of the Court Register kept by the District Court for Wrocław-Fabryczna in Wrocław, IX Commercial Department of the National Court Register, under KRS number No. 0000874432, NIP 6912552442, share capital: PLN 2,560,00 ...
used
; Gross weight [kg]: 1950; Engine: Doosan P086TI-1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 224
used
Engine lathe NILES DP1/S3 Year of manufacture: 1988 Manufacturer: NILES Made in Germany Machine is almost not used, complete Technical Data: Height of center over bed: 800mm Max. processing diameter over bed: 1.600mm Max. processing diameter over support:1.250mm Min. work-piece diameter: 250mm Max. work-piece weight: 40.000kg Max. work-piece diameter: 1.250mm Internal spindle cone (1:10): 120mm Range of longitudinal support feeds: -1st row (stepless adjustment): 1-200mm/min -2st row (stepless adjustment): 36-3600mm/min Range od feeds of transversal slides: -1st row (stepless adjustment): 0,4-80mm/min -2st row (stepless adjustment): 14,4-1440mm/min Range of feeds of cross slides: -1st row (stepless adjustment): 0,12-25mm/min -2st row (stepless adjustment): 4,5-450mm/min Length of travel: -Of transversal slides: 760mm -Of cross slides: 500mm -Of incisive ca ...
used
; Power [PS]: 272; Gross weight [kg]: 2350; Engine: Cummins 6CTA8.3-G1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 63A - 32A; Water Tank Volume [l]: 285
used
Catalog number 6728 TECHNICAL SPECIFICATIONS - max cutting height 120mm - max element width 700mm - working width of the shaft with saws 640mm - max saw diameter 400mm - disc bore diameter 90mm in advance: -Triggers - 2 pulling shafts, toothed from below: - 2 pull shafts, smooth - shaft with saws - pulling shaft, smooth - lead rollers, slip, metal 12pcs - 3 Types of feed speed - feed motor 4,4kW - motor 30kW - machine dimension length / width / height 3200x1420x1350mm - weight about 3000kg ADVANTAGES – Polish production – solid construction – used machine, very good condition Net price: 49900 PLN Price without tax: 11213 EUR depending on the price 4.45 EUR (Prices may fluctuate with higher fluctuations)
used
CATALOG NO. 6889 TECHNICAL SPECIFICATIONS - max cutting height 140mm - max element width 700mm - working width of the shaft with saws 660mm - max saw diameter 400mm - disc bore diameter 90mm in advance: -Triggers - 2 pulling shafts, toothed from below: - 3 slip rollers, metal introduction - 2 pull shafts, smooth - shaft with saws - pulling shaft, smooth - 3 metal output slip rollers - feed motor about 2kW - motor 30kW - machine dimension length / width / height 2660x1320x1900mm, - weight about 3000kg – Polish production – used machine, very good condition Net price: 49900 PLN Price without tax: 11213 EUR depending on the price 4.45 EUR (Prices may fluctuate with higher fluctuations)
new
Fiber laser cutting machine 1500x3000 mm 12000W Raycus laser source High-performance machine base. High-performance servo motors. Intelligent cutting control system, easy operation; Fast start-up, supported by segment and steppiecing technology; Specialized air duct with oversized caliber, makes smoke exhaust smooth. Fully enclosed design; European CE standard laser protection. Two shuttle tables offer a high level of safety and comfort Technical Parameters: Working area 3000x1500 mm X-axis travel 1520 mm Y-axis travel 3020 mm Z-axis travel 300 mm X,Y positioning accuracy ±0.05 mm X,Y repeat positioning accuracy ±0.03. mm Acceleration 1.3 m/s² Max. Simultaneous positioning speed 120 m/min Table load 3000 kg Machine size 8100×2812×2640 mm Laser power 12000W Raycus FSCUT8000B control system Connected load 68 KW Voltage: 380V/50Hz Prices DPL-1530 H ...
used
; Gross weight [kg]: 40
used
; Gross weight [kg]: 5874; Engine: Perkins 2806A-E18TAG2; Accessories: Tanker, Battery, Control Panel, Stahldach, FG Wilson P715-3 Generator Set, Aggregaat; Water Tank Volume [l]: 1157
new
6000W Raycus The machine is fully equipped: - CYPCUT - high-end CNC with German surface - Raycus - laser source - Raytool cutting head - Interchangeable table - 1 CCD camera, 1 for indoor use -Stabilizer - Air conditioning for control cabinet - High-performance radiator - Anti-collision protection - 24 months warranty Working area (mm) 3000 x 1500; 6000 x 2000; 4000 x 2000 Max. working height (mm) 100 Effective travel X axis (mm) 3050; 6050; 4050 Y axis (mm) 1550; 2050; 2050 Z axis (mm) 100 Position accuracy X axis (mm/m) ±0.03 Y axis (mm/m) ±0.03 Z axis (mm/m) ±0.01 Repeatability X axis (mm) ±0.01 Y axis (mm) ±0.01 Z axis (mm) ±0.005 Positioning speed X axis (m/min) 120 Y axis (m/min) 120 Z axis (m/min) 30 Acceleration: X-axis: 1.5G , Y-axis: 1.5G Working table load 2000 kg Table change in sec. 20 Max Cutting Height ...
new
The DPL-6030/40/5 axis fiber laser system enables fully automatic laser cutting of tubes with round, square and rectangular cross-sections, as well as ovals Profilen.In the table lists the maximum values. The system is characterized by excellent productivity and precision, so that it does not even need to shy away from comparison with other specialized tube processing systems in this work area. Basic parameters (option according to customer requirements) Machines Type DPL-6030/40/5 axes Laser shaft length 1070 nmLaser power 2000W IPG fiber laserConnected load 13.5 kWMax driven axes 4 - 7 ( 7 axis option )X./ Y axes Positioning accuracy ±0.08 X / Y axes Repeatability ±0.04 X / Y axes Travel speed 80 m/minMax, cutting speed 30 m/minMin. Cutting width 0.02-0.08 Max. cutting thickness at 2000W Steel: 6 mm , Stainless steel: 5 mm Cutting material stainless steel, black steel St37 , titanium ...
new
Fiber laser tube cutting machine with table loading Cutting pipes using: Diameters from 16 to 220mm Length up to 6000mm Weight of 200kg 5-7 tubes per load, total load capacity up to 2000kg Min. goose waste 90mm Automatic loading and unloading system Cycle production and automatic feeding Laser power 2000 W
new
The DPL-7040/5 axis system enables fully automatic laser cutting of tubes with round, square and rectangular cross-sections, as well as oval profiles. The table lists the maximum values. The system is characterized by excellent productivity and precision, so that it does not even need to shy away from comparison with other specialized tube processing systems in this work area. Basic parameters (option according to customer requirements) Machines Type DPL-7040/5 axes Laser wavelength 1070 nm Laser power 2000W IPG fiber laser Connected load 13.5 kW , Max driven axes 5 ,X./ Y axis positioning accuracy ±0.08 X / Y axis repeatability ±0.04 X / Y axis travel speed 80 m/min Max, cutting speed 30 m/min Min. cutting width 0.02-0.08 Max. cutting thickness at 2000W Steel: 7 mm , Stainless steel: 6 mm cutting material stainless steel, black steel St37, titanium, aluminum and much more. Machin ...
new
Three Chucks Laser Tube Cutting Machine Suitable for heavy-duty processing and pipes of various shapes For pipe diameters from 20 to 350 mm Minimal to no waste Upload up to 12m long pipes Unloading up to 9m Powerful servos with high speed and precision in positioning Automatic uploading and unloading of tables CW fiber laser 1000-6000W CAM software for managing the machine Optional: Weld seam detection Laser swivel head
used
; Gross weight [kg]: 2854; Engine: Perkins 1506A-E88TAG5; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 528
used
; Gross weight [kg]: 5033; Engine: Perkins 2506A-E15TAG; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 888
new
Laser source: 8/12 kW Raycus (149000/185000€) Table size/working area: 1500x3000mm Control system: FSCUT 8000 B Laser head: BLT441/BLT421 X-axis travel: 1520 mm Y-axis: 3020 mm Z-axis: 300 mm Positioning accuracy: ±0.05/1000 mm Repeatability: ±0.03.1000 mm Acceleration: 1.3 m/s² Max. positioning speed: 120 m/min Max. table load: 3000 kg Machine size: 8100x2812x2640 mm
new
- CYPCUT - high-end CNC with German surface - IPG - laser source - Precitec Lightcutter - cutting head - Interchangeable table - 2 CCD cameras, 2 for indoor use, 1 x for control shuttle table - 2 years warranty -Stabilizer - Air conditioning for control cabinet - High-performance radiator - Anti-collision protection - Fast Cutting Mode 24 months warranty Working area (mm) 4000 x 2000 Max. working height (mm) 100 Effective travel X axis (mm) 4050 Y axis (mm) 2050 Z axis (mm) 100 Position accuracy X axis (mm/m) ±0.03 Y axis (mm/m) ±0.03 Z axis (mm/m) ±0.01 Repeatability X axis (mm) ±0.01 Y axis (mm) ±0.01 Z axis (mm) ±0.005 Positioning speed X axis (m/min) 120 Y axis (m/min) 120 Z axis (m/min) 30 Acceleration: X-axis: 1.5G , Y-axis: 1.5G Working table load 2000 kg Table change in sec. 20 Max Cutting Heights – IPG Laser 4000 W 20 mm / steel - 16 mm / ...
used
; Gross weight [kg]: 4000; Engine: Iveco Cursor13TE3A.S551; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and battery charger, Including: sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 550
new
Laser source: 12 kW Raycus/IPG Laser head: Precitec Pro-Cutter 2.0 Control System: FSCUT 8000 Effective working area: 1520x3050 mm Max. positioning speed: 120 m/min Max. acceleration: 1.5 m/s² Positioning accuracy: 0.02 mm/m Repetition accuracy: 0.03 mm/m Max. table load: 1500 kg
new
Model DPL-1530HP-4 kW 8 levels 3000x1500mm (300kg load per level) Loading and unloading system Laser Raycus 4 kW Control FSCUT 2000ER Laser head Raytools BM115 autofocus Cooler Hanli 3.8 kW Air blower 11kW Nesting Software Cypnest-Nesting Software Low-pressure gas alarm, gas pressure switch and SW control Voltage stabilizer 48-72 KVA Enclosure according to laser class 4 Heavy duty machine base. High performance servo motors. Intelligent cutting control system, easy operation Fast pinning, supported by segment and step pinning technology Specialized air duct with oversized caliber, makes the smoke exhaust smooth. Completely enclosed construction European CE standard Dual Shuttle tables offer a high level of safety and comfort. Positioning accuracy ±0.05/1000mm Repeating positioning accuracy ±0.03/1000mm Acceleration 1.6 m/s² Max. speed 120 m/min Sheet loading 1 ...
used
; Gross weight [kg]: 4500; Engine: Iveco CR16TE1W.S550; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and battery charger, Including: sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 1000
used
; Gross weight [kg]: 1650; Engine: Iveco NEF45TM3.S500; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and Battery charger, Including: sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 185
used
; Gross weight [kg]: 4200; Engine: Iveco CR13TE7W.S550; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Battery charger and coolant heater, Including: sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 800
used
; Gross weight [kg]: 2350; Engine: Iveco NEF67TM4.S500; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and battery charger, Including: sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 224
used
; Gross weight [kg]: 5300; Engine: Volvo TWD1683GE-SV; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger
used
; Gross weight [kg]: 3820; Engine: Volvo TAD882GE-SV; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 1800
used
; Gross weight [kg]: 6000; Engine: Volvo TAD1382GE-SV; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 1000
used
; Gross weight [kg]: 1600; Engine: Deutz TCD2.9L4-SV; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 250
used
; Gross weight [kg]: 3100; Engine: Deutz TCD6.1L6-SV; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 1100
used
Dimensions changed as of February 2023, to 2540x1140x1647 (spec sheet shows old dimensions); Gross weight [kg]: 1400; Engine: Deutz TD2.2L3-SV; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 150
used
; Gross weight [kg]: 1500; Engine: Kohler KDI2504TCRCAC-SV; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 250
used
; Gross weight [kg]: 2960; Engine: Iveco F5MGL415A; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 1100
used
; Gross weight [kg]: 1677; Engine: Volvo TAD532GE; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 280
used
; Accessories: 1x 32A-6h - 400V, 1x 16A-6h - 400V, 1x 16A-6h - 230V, 1x IPX8 - 230V
used
; Gross weight [kg]: 1315; Engine: Iveco NEF45TM2A; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and battery charger, Including: sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 185