dp used for sale

; Gross weight [kg]: 2035; Engine: Hyundai P086TI-1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 185

; Gross weight [kg]: 2364; Engine: Hyundai P086TI; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 224

; Gross weight [kg]: 6185; Engine: Hyundai DP222LC; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 1090

; Gross weight [kg]: 5650; Engine: Hyundai DP180LB; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 1000

Dosing machine Comas DPCI 600 - Year of construction 2004

liter capacity: 980 l Pressure of pump: 8 / 20 bar total power requirement: - kW weight of the machine ca.: 560 kg dimensions of the machine ca.: 2,3 x 2,0 x 1,8 m Coolant System MAYFRAM - BFU 980 /S/20+/8 - NEW, unused - universally applicable - can be controlled via contactors - incl. paper band filter - Number of pumps: 2 - Pump capacity: 4.0 kW, 2,917 rpm, 5.8 m³, 96.6 l/min, pressure 25 bar, max. temperature 90°C -.- kW, 2,864 rpm, 2.0 m³/h, 33.3 l/min, pressure 25 bar, max. temperature 90°C The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

; Gross weight [kg]: 5500; Engine: Hyundai DP180LA; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 900

; Gross weight [kg]: 4600; Engine: Hyundai DP158LC; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 775

EU STAGE 5 Compliant, 50/60 Hz switchable frequency via terminal link, 550 kVA Prime power, Spark arresting silencer; Gross weight [kg]: 6740; Engine: Perkins 2806J-E18TAG1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including sockets CEE-Form:, 2x 16A (1ph+N+E), 2x 32A (3ph+N+E), 1x 63A (3ph+N+E), 1x 125A (3ph+N+E); Water Tank Volume [l]: 1125

; Gross weight [kg]: 450; Engine: Kubota D1105-EF02; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 38

Single sided postforming edge processing machine Brand: WEHRMANN   Type: Combima DPF New with 12 months warranty Example with typical equipment; almost each equipment is possible.  Please discuss your requirements with us  Technical data: Machine control: BECKHOFF route control with 15? Touch-Screen for pre-selection of units and for saving programs.  The workpiece transport via precision roller chain R75 with height adjustable top pressure.  Feed speed: max. V=6-30 m/min.  frequency controlled drive,  Top pressure: Motorical height adjustment via axis adjustment in program Right hand site equipped with 1 unit, width adjustment via NC axis: 1 Pre-milling unit With 1 motor with vertical shaft,  400 V, 12,5 KW, 100 Hz, 6000 rpm. Motor shaft Hydro D40 Swivable 90 - 180 degrees, move in/out for use Left hand site Seite: 1 Infeed fence  Infee ...

liter capacity: 980 l Pressure of pump: 8 / 20 bar total power requirement: - kW weight of the machine ca.: 560 kg dimensions of the machine ca.: 2,3 x 2,0 x 1,8 m Coolant System MAYFRAM - DPF400-V980 SKD (BFU 980 /S/20+/8) - NEW, unused - universally applicable - can be controlled via contactors - incl. paper band filter - Number of pumps: 3 - Pump capacity: 4.0 kW, 2,917 rpm, 5.8 m³/h, 96.6 l/min, pressure 25 bar, max. temp. 90°C 3.0 kW, 3,514 rpm, 20.5 m³/h, 341.66 l/min, pressure 25 bar, max. temp. 90°C -.- kW, 2,864 rpm, 2.0 m³/h, 33.3 l/min, pressure 25 bar, max. temp. 90°C The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

; Gross weight [kg]: 5938; Engine: Perkins 4006-23TAG3A; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 1494

; Gross weight [kg]: 1144; Engine: Perkins 1104A-44TG2; Accessories: Tanker, Battery, Control Panel, Stahldach, Including battery charger and coolant heater; Water Tank Volume [l]: 180

; Power [PS]: 925; Gross weight [kg]: 5040; Engine: Perkins; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 1702

CNC Milling machine PMER type DPM Travel X: 780 mm Travel Y: 410 mm Travel Z: 550 mm Numerical Command ANILAM type 5000 M Cone: ISO 40 Spindle exit: 120 mm (manual) Spindle speed: from 70 to 3800 RPM Table size: 1270 x 320 mm Year of construction: 2004 Maxi distance spindle nose/table: 500 mm Mini distance spindle nose/table: 100 mm Swivel head right/left Jog crank Possibility to work manually (with cranks) or driven by the CN Lubricant pump Voltage: 380 V Width: 1900 mm Depth: 2100 mm Total height: 2500 mm Weight: 2,5 T

; Power [PS]: 925; Gross weight [kg]: 6629; Engine: Perkins 2806-E18TTAG5; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 1529

weight max.: 20 t workpiece diameter: 150 - 3800 mm drum diameter: 350 x 150 mm feed: 100 - 1000 mm/min total power requirement: 2 x 1,1 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 10 t workpiece diameter: 100 - 3200 mm drum diameter: 300 x 120 mm feed: 100 - 1000 mm/min total power requirement: 2 x 0,55 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 40 t workpiece diameter: 150 - 4500 mm drum diameter: 400 x 160 mm feed: 100 - 1000 mm/min total power requirement: 2 x 1,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The drying / conveying system for plastics - Piovan DP620 / Operating hours: approx. 500 h / Same as new Year of Make: 2016 Description: The drying/conveying system for plastics with 2 molecular sieves, 4 silos Silos capacities: 2 x 200l, 1 x 125l, 1 x 75l (600 liters in total) Operating hours: approx. 500 h Sieves work alternately, during the drying process, one sieve works and the second sieve regenerates Silos are hermetically insulated Silos can work separately and independently with different materials and temperatures. Silos have a heating and temperature maintenance function There is an option to purchase a vacuum pump with dust removal system All offered peripherals are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company i ...

Vemag vacuum filler -Type: DP10E -Power: 12 kW -Filling speed: 6000 kg/h -Portion size: 5-60 000 g -Hopper capacity: 250 L -External dimensions: 2200 x 1500 x 1950 mm -Power supply: 400V 50Hz -Year of production: 2014 -Weight: 1300 kg -Condition: Used in very good condition, ready to work

; Gross weight [kg]: 4522; Engine: Perkins 2806A-E18TAG2; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 1132

; Power [PS]: 778; Gross weight [kg]: 5874; Engine: Perkins 2806A-E18TAG2; Accessories: Tanker, Battery, Control Panel, Stahldach, FG Wilson P715-3 Generator Set; Water Tank Volume [l]: 1132

; Gross weight [kg]: 4342; Engine: Perkins 2806A-E18TAG1A; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 1132

Tribloc Cime Careddu DPS 12/12/1 with 12 rinser stations pressure filler with 12 filling valves and 1 head crowner capacity: approx. 2.500 bph isobaric, with vacuum pump pre-evacuation with height adjustment fixed for 330 ml, 500 ml, 750 ml bottles

FOBA DP 15 Marking Laser The FOBA DP 15 laser marking system uses a fiber laser with a wavelength of 1064 nm and a lens focusing of f=254 mm (254 mm focal length). This combination enables the permanent and sharp marking of materials such as metals and plastics by the "all-round laser". The 1064 nm wavelength is well absorbed by many materials, which can be used for annealing marking, color change, or material removal. Application: The fiber laser is a versatile "all-round laser" for marking industrial products. It is ideal for metals and a wide range of plastics. The technology enables permanent, legible and precise marking. Functionality: The laser beam creates a focused point of light that penetrates the material. Depending on the material and settings, various effects can be achieved, including: Annealing: A change in color of the material due to heating. Color cha ...

Machine Name: Used Sludge Dewatering Centrifuge Manufacturer: KHD / Hiller Type: CP3034/DP350422 VA HY Year of manufacture: 1997 / 2012 Material: V4A 14571 Max. drum speed: 4,200 rpm Inner diameter drum: 348 mm Drum wall thickness: 10 mm Inner drum length: 1,700 mm Ab. Sediment density: 1.30 kg/dm3 Max. operating temperature: 50 C° Dimensions: L 2,700 x W 1,400 x H 1,100 mm Curb weight: 2,880 kg Tech. Documentation: Yes Note: The rotor was replaced by Hiller in 2012 in a V4A stainless steel version, type: DP 350-422 VA HY Accessories: A control cabinet and a hydraulic system Condition: Used Price: On request

pressure: 80.0 t stroke: 250 mm table surface area: 1040 x 260 mm column travel between the guideways: 1040 mm ajustment speed: 8.0 mm/sec working feed: 5.0 mm/sec return speed: 10.0 mm/sec engine output: 5.5 kW weight of the machine ca.: 835 kg. dimensions of the machine ca.: 1810 x 700 x 2100 mm Furnishing: - Robust electro-hydraulic workshop press, with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod including round steel chain and 2x locking bolts Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: 1x delivery speed 1x working speed 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounted on t ...

pressure: 150 t stroke: 300 mm table surface area: 1070 x 290 mm column travel between the guideways: 1070 mm ajustment speed: 9.0 mm/sec working feed: 5.0 mm/sec return speed: 10.0 mm/sec engine output: 11.0 kW weight of the machine ca.: 1870 kg. range L-W-H: 2200 x 1300 x 2300 mm Exhibition machine from 2021 with only approximately 2 operating hours Condition as new Special price upon request Features: - Robust electro-hydraulic workshop press with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in . and out bolts, bearings, bushings, and much more. - Robust welded steel construction for heavy-duty use - Table height adjustment via piston rod Includes round steel chain and 2 locking pins Piston rod with metric mount - 1 set of V-block prism supports - Pressure gauge for pressure display - Simple manual control with: 1 feed speed 1 working speed 1 ...

Height=1.63 m, Overall length= 1.02 m, Overall width= 0.75 m, Net weight= 1245 kg,

; Gross weight [kg]: 5694; Engine: Perkins 2806A-E18TAG1A; Accessories: Tanker, Battery, Control Panel, Stahldach, Including battery charge and coolant heater; Water Tank Volume [l]: 1132

; Gross weight [kg]: 4202; Engine: Perkins 2806A-E18TAG1; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 1132

; Power [PS]: 60; Gross weight [kg]: 769; Engine: Perkins 1103A-33TG2; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 145

Injection stretch blow moulding machines for PET bottles

General SKU204W046 LocationBarneveld CEcheck MakeEdwards Pressure Working pressure0.15 Bar Vacuum possiblecheck Main Features MaterialMild steel Motor7.5 KW Specified Features - Vacuum pump Pumpcheck Number of pumps:1 With motor7,50 kW, 380 volt, 2915 rpm MaterialMild steel With jacketcheck General TypeDrystar DP160 Mach.No.CSM1414 / 972116268 Year of construction1997 Mounted on framecheck Floorspace1,60x0,65 m Total height1,90 m Weight750 kg Extra Specificationsthis machine is sold as as is”.Vacuum pumpsEdwardsPumps > Vacuum pumpsBrand > Edwards What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

liter capacity: 980 l Pressure of pump: 8 / 20 / 80 bar control: Schütze / Contactors total power requirement: - kW weight of the machine ca.: 765 kg dimensions of the machine ca.: 2,3 x 2,0 x 1,8 m Coolant System MAYFRAM - DPF400-V980 SKD (BFU 980 /S/20+/8) - NEW, unused - universally applicable - can be controlled via contactors - incl. paper band filter - Number of pumps: 3 - Pump capacity: 4.0 kW, 2,917 rpm, 5.8 m³/h, 96.6 l/min, pressure 25 bar, max. temp. 90°C 3.0 kW, 3,514 rpm, 20.5 m³/h, 341.66 l/min, pressure 25 bar, max. temp. 90°C -.- kW, 2,864 rpm, 2.0 m³/h, 33.3 l/min, pressure 25 bar, max. temp. 90°C The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

; Power [PS]: 598; Gross weight [kg]: 3699; Engine: Perkins 2506A-E15TAG2; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 888

; Gross weight [kg]: 5071; Engine: Perkins 2506A-E15TAG2; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 888

; Gross weight [kg]: 3253; Engine: Perkins 2206A-E13TAG3; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 888

liter capacity: 980 l Pressure of pump: 8 / 20 bar control: Schütze / Contactors total power requirement: - kW weight of the machine ca.: 560 kg dimensions of the machine ca.: 2,3 x 2,0 x 1,8 m Coolant System MAYFRAN - BFU 980 /S/20+/8 - NEW, unused - universally applicable - can be controlled via contactors - incl. paper band filter - Number of pumps: 2 - Pump capacity: 4.0 kW, 2,917 rpm, 5.8 m³, 96.6 l/min, pressure 25 bar, max. temperature 90°C -.- kW, 2,864 rpm, 2.0 m³/h, 33.3 l/min, pressure 25 bar, max. temperature 90°C The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 150 t stroke: 300 mm table surface area: 1070 x 290 mm column travel between the guideways: 1070 mm ajustment speed: 9.0 mm/sec working feed: 5.0 mm/sec return speed: 10.0 mm/sec engine output: 11.0 kW weight of the machine ca.: 2070 kg. range L-W-H: 2200 x 1200 x 2550 mm Display machine from 2023 With only approximately 2 operating hours Like new condition Special price upon request Furnishing: - Robust electro-hydraulic workshop press, with adjustable cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod including round steel chain and 2x locking bolts Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: 1x delivery spee ...

pressure: 30.0 t stroke: 200 mm table surface area: 775 x 190 mm column travel between the guideways: 775 mm ajustment speed: 7.5 mm/sec working feed: 5.0 mm/sec return speed: 10.0 mm/sec engine output: 3.0 kW weight of the machine ca.: 400 kg. dimensions of the machine ca.: 1.500 x 700 x 1.800 mm Features: - Robust electro-hydraulic workshop press with fixed cylinder - Ideal for aligning axles, shafts, etc., . but also for pressing in and out bolts, bearings, bushings, and much more. - Robust welded steel construction for heavy-duty use - Table height adjustment via piston rod Includes round steel chain and 2 locking pins Piston rod with metric mount - 1 set of V-block prism supports - Pressure gauge for pressure display - Simple manual control with: 1 feed speed 1 working speed 1 retraction speed - Piston can be stopped in any position - Fixed hydraulic tank mounted on the side -  ...

; Gross weight [kg]: 818; Engine: Perkins 1103A-33G1; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 71

; Gross weight [kg]: 818; Engine: Perkins 1103A-33G1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including: 125 liter fuel tank capacity; Water Tank Volume [l]: 125

; Power [PS]: 2719; Gross weight [kg]: 13380; Engine: Perkins 4016-61TRG3; Accessories: Battery, Control Panel

pressure: 60.0 t stroke: 250 mm table surface area: 1040 x 370 (315) mm column travel between the guideways: 1040 mm ajustment speed: 8.0 mm/sec working feed: 4.0 mm/sec return speed: 10.0 mm/sec engine output: 4.0 kW weight of the machine ca.: 800 kg. dimensions of the machine ca.: 1.700 x 700 x 2.100 mm Features: - Robust electro-hydraulic workshop press with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out bolts, bearings, bushings, and much more. - Robust welded steel construction for heavy-duty use - Table height adjustment via piston rod Includes round steel chain and 2 locking pins Piston rod with metric mount - 1 set of V-block prism supports - Pressure gauge for pressure display - Simple manual control with: 1 feed speed 1 working speed 1 retraction speed - Piston can be stopped in any position - Fixed hydraulic tank mounted on the s ...

pressure: 100 t stroke: 300 mm table surface area: 1070 x 315 mm column travel between the guideways: 1070 mm ajustment speed: 8.0 mm/sec working feed: 5.0 mm/sec return speed: 10.0 mm/sec oil volume: 90.0 l engine output: 5.5 kW weight of the machine ca.: 1870 kg. dimensions of the machine ca.: 2050 x 1000 x 2200 mm Furnishing: - Robust electro-hydraulic workshop press, with adjustable cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod including round steel chain and 2x locking bolts Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: 1x delivery speed 1x working speed 1x retreat speed - Piston can be stopped in any position - Hy ...

General SKU399X1180 LocationBarneveld CEcheck MakePLAS MEC S.r.l. Main Features MaterialStainless steel Volume13 Ltr. Motor11 KW Specified Features - Hot mixer Hot/Cold mixercheck Hot mixercheck Capacity10 Ltr. (13 Ltr.) With motorcheck (11 kW) With variable speed drivecheck Rotor speed5 — 50 rpm Manual operated outletcheck MaterialStainless steel 1.4301 (304) Information TypeDMP-13 Year of construction2016 Mounted on framecheck With switchgearcheck (supplied with electrical cabinet & control system: as is) Extra SpecificationsEquipped with an Industrial Frigo WTP 18/140 pressurized water temperature control unit: Temperature range from +10°C up to +140°C for accurate and stable thermal regulation Nominal operating pressure 3.4 bar, with system static pressure 0.5–0.8 bar Hot mixersPlasmecPlastic machinery > Hot mixersBrand > Plasmec What you can expect fr ...