135,498 used machines on RESALE, but how to find them? Machine Search
5 adjustable drilling speeds by rerouting the v-belt. Drill chuck 13 mm with key. Auction-ID: A1-48994-38
: 18 mm : M 12 : M 14 : MK 2 : 225-4.300 U/min. spindle stroke: 80 mm throat: 190 mm column diameter: 65 mm : 300x240 mm : 2 x 12 x 80 mm : 75/357 mm : 300x240 mm : 2 x 12 x 80 mm : 437/437 mm feed: von Hand : Handkurbel total power requirement: 0,37/0,55 kW Machine height: 840 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Drilling capacity in St 60: 30 mm threading in St 60: M 16 threading in GG 20: M 20 Short spindle: MK 3 bore stroke: 140 mm throat: 293 mm column diameter: 115 mm Machine table - usable table surface: 514x360 mm T-Slots Amount - Width - Distance: 2 x 14 x 224 mm Distance spindle - machine table min./max.: 132/724 mm feed: Hand spindle turning speed range: 225-4300 UpM height of the machine: 1790 mm total power requirement: 1,0/1,6 kW Standard equipment: - Mushroom pushbutton (latching) for EMERGENCY STOP - Reversing switch for right-left rotation - Motor protection switch - Speed adjustment stepless - Speed display digital - Protection IP 54 - Connector (fully assembled, cable length 2 m) - Spindle protection with electrical protection The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 50 mm, 1600 mm
Radial drilling machine max. drilling diameter in steel 50 mm max. drilling diameter in cast iron 60 mm max. thread in steel M50 x 1.5 Spindle projection 1600 mm max. distance spindle nose to lower part plate 1505 mm max. boom height adjustment 875 mm Max. drill carriage adjustment on boom arm 1280 mm Taper of spindle Morse 5 Spindle stroke 310 mm Spindle speed infinitely variable 12 Spindle speed range 28 - 2500 1/min Max. torque 310 Nm Base plate 1820x986 mm Machine weight approx. 4550 kg
Dürselen Corta PB 04 Paper drilling machine Age: 1999 4-spindle Drill hole diameter: 3-15 mm Drilling distance: 31.7 – 293 mm Max. stacking height: 50 mm
Projection: approx. 700 mm Table dimensions: approx. 780 x 655 mm Speed range: 125 - 710 rpm Internal reference: previously lot 51 Auction-ID: A7-49882-263
- Including mobile work cabinet total size 233x65xH90cm. Auction-ID: A1-49374-131
Vitap Forex 24 Manufacturer: Vitap Type: Foratrice Forex24 Machine Nr.: 790847 Year: 1999 Motor: 1.8 kW Nr. Spindel: 21+3 Head and topdrilling: Electro-pneumatic tilting Semi-automatic: Verical and horizontal drilling: RPM: 2.840 rpm Drilling dept: Max. 80 mm, with Siko counter Raster: 32 mm Spindel/group: 3-5-9 Length stoppers: both sides scale with 2 filp stops per side Clamps: 2 pneumatic clamps top-side manual adjustment Pressure: 6-8 bar Dimensions: 1.570920 mm Weight: 350 KG
Alzmetall AX3 SV Säulenbohrmaschine Hersteller: Alzmetall Typ: AX3SV Baujahr: 1996 Zustand: gut, gebraucht Drehzahlbereich: 160 ? 2250 U/min Bohrvermögen (St60) 40 mm Futter-/ Werkzeugaufnahme MK 3 Spindelhub 120 mm Ausladung 293 mm Säulendurchmesser 115 mm Abstand Spindel-Tisch min./max. 117 / 701 mm Vorschub 0,1 + 0,2 mm/U Nettogewicht ca.270 kg Sonderausstattung: ? Automatischer Vorschub ? Spindelschutz
Used, untested. MK4 recording. Loading conditions: Is loaded onto the truck Forklift and crane available Auction-ID: A7-50094-11
Mini Excavator Drill Rig, Compatible for 800 -2500 kg Excavators, 200 mm Bore, Never Used Overall dimensions: 800 x 200 x 200 mm Weight: 80 kg Auction-ID: A7-50065-260
Mini Excavator Drill Rig, Compatible for 800 -2500 kg Excavators, 200 mm Bore, Never Used Overall dimensions: 800 x 200 x 200 mm Weight: 80 kg Auction-ID: A7-50066-326
Core drilling machine / diamond drill Brand: Daewoo Type: DADK-D230BE Peak power: 4580 watts Speed: 100-530 RPM (infinitely adjustable) Max. Drilling Diameter: 230 mm Max. Drilling Depth: 550 mm Drill connection: 1/2 inch internal, 5/4 inch external Equipped with: digital display Equipped with: connection for water cooling Equipped with: 30 milliamp residual current device (PRCD) Tripod: Adjustable aluminum tripod Condition: unused, in the original packaging Attention: diamond drill bit not included Auction-ID: A3-46161-1131
Mini Excavator Drill Rig, Compatible for 800 -2500 kg Excavators, 200 mm Bore, Never Used Overall dimensions: 800 x 200 x 200 mm Weight: 80 kg Auction-ID: A7-50066-260
Technical data: - Drilling capacity in steel ST 60 28 mm - Drilling capacity in steel ST 60 32 mm - Drilling spindle holder MK 3 - Drilling spindle stroke 150 mm - Drilling spindle speeds infinitely variable 80 - 1170 rpm - 2 feeds 0.1 / 0.2 mm/rev - Projection 290 mm - Max. distance table - drilling spindle 780 mm - Table with 2 T-slots 480 x 400 mm - Height adjustable via rack with hand crank - Drive 400 V / 0.9 / 1.3 kW - Space requirement approx. W 600 x H 2100 x D 900 mm - Weight approx. 420 kg - with: - Right – Counterclockwise rotation - Keyless chuck 1-13 - Lighting
Offer 26203 Technical data: - Drilling capacity - in steel 16 mm - - in aluminium 20 mm - Drilling spindle holder MK 2 - Drilling depth 100 mm - Spindle / column projection 215 mm - 6 drilling spindle speeds stage 1 200 - 1600 rpm - 6 drilling spindle speeds stage 2 400 - 3200 rpm - Drive 400 V / 0.7 kW - Drilling table with T-slot W 250 x D 320 mm - Max. distance between drill chuck / table approx. 220 mm - Space requirement approx. W 300 x H 1050 x D 450 mm - Weight approx. 100 kg - Keyless chuck 1 - 13 mm - Coolant device - Original machine cabinet
Offer 26251 Technical data: Drilling capacity in steel ST 60 32 mm Drilling capacity in steel ST 60 40 mm Long spindle MK 3 Drilling spindle speeds infinitely variable 160 - 2250 rpm Drilling spindle stroke 120 mm Projection 293 mm Column diameter 115 mm Machined base plate with T-grooves 400 x 400 mm Max. distance from base plate to spindle 600 mm Emergency stop button E. Footswitch Space requirement approx. W 450 x H 1250 x D 900 mm Weight approx. 250 kg Keyless chuck Table base
Incl. vice, jaw width: approx. 150 mm
• Drilling units: four • table with one slot • vise, jaw width: 80 mm
incl. Machine vice, jaw width: approx. 135 mm
Spindeldrehzahl: von 220 bis 2500 U/min, Spindelaufnahme: MK 2, Motorleistung: 550 kW, Betriebsspannung: 400 V, Tischabmessungen: 200 x 200 mm
WABROTECH DJ-16 E Magnetic Core Drilling Machine Manufacturer WABROTECH Model DJ-16 E Condition untested Location 73529 Schwäbisch Gmünd DE Lot 25
Maschinennummer: 00874, Betriebsspannung: 220 V, Frequenz: 50 Hz, Anschluss: 315 W, Tischdurchmesser: 250 mm
Additional technical specifications: • max. tube diameter: approx. 30 mm • Chuck clearance: 30 mm • max. clamping length: approx. 3200 mm
Drehzahl: von 200 - 2800 U/min, Bohrtiefe: bis 100 mm
SOLID TB 15 Bench Drilling Machine Manufacturer SOLID Model TB 15 Condition untested Location 72589 Westerheim DE Lot 37
Attention: the tapping head seen in the photos is not included in the scope of delivery! Additional technical specifications: • Drilling units: three • table with one slot
Additional technical specifications: • Drilling machines: a total of six drilling machines • Vices: three vices • jaw width: 150 mm
REXON SB 25/16 G Column Drilling Machine Manufacturer REXON Model SB 25/16 G Year 1990 Condition untested Location 72589 Westerheim DE Lot 166
REXON SB 25/16 G Column Drilling Machine Manufacturer REXON Model SB 25/16 G Year 1990 Condition untested Location 72589 Westerheim DE Lot 167
Drilling Ø: 35/40 mm Spindle holder: MK 3 Drilling stroke: 140 mm Projection: 293 mm Drive motor: 380 V, 1.5/1.9 kW Weight: 285 kg Space requirement: 900 x 550 x 1830 mm
Code: 0481 Brand: VITAP Model: BM 13/S - CE Standard Multiple boring machine with 13 spindles for furniture, carpentry, panels, kitchens, bathroom cabinets and various - CE Standard Technical data: N°13 spindles Center-to-center distance between spindles 32 mm Total center-to-center distance between the first and last spindles 384 mm Table dimensions 600 x 400 mm Max drilling depth 70 mm Min spindle speed 2800 rpm Motor power 1,5 Hp Compressed air pressure 6/8 atm Overall dimensions mm 750 x 560 x 1200 h Weight kg 160
unused; in a suitcase; Max brick drill diameter 132mm; Max concrete drill diameter 80mm; no load speed 1 720-1230rpm; no load speed 2 1000-1780rpm; with water supply; 7749 Auction-ID: A1-50092-306
50/60Hz; core drill dia 35mm; twist drill dia 13mm; stroke 210mm; cable length 2.5M; 7750 Auction-ID: A1-50092-305
unused; in a suitcase; Max brick drill diameter 132mm; Max concrete drill diameter 80mm; no load speed 1 720-1230rpm; no load speed 2 1000-1780rpm; with water supply; 7749 Auction-ID: A1-50092-307
equipped with automatic cooling system; unused; in suitcase; 5637 Auction-ID: A1-50092-309
equipped with automatic cooling system; unused; in suitcase; 5637 Auction-ID: A1-50092-308
50/60Hz; core drill dia 35mm; twist drill dia 13mm; stroke 210mm; cable length 2.5M; 7750 Auction-ID: A1-50092-304
: gebraucht : 2017 : 3901 : China : 8490 € : 1 : 6790 € : 32 mm : MK 4 : 300 - 1.000 mm : 32 - 2.500 (16) U/min : 1760 mm : 800 mm : 2080 mm : 1600 kg : 530 - 1.000 mm : 2.2 kW : 240 mm : 250 mm : 0,75 kW : 0,10 - 1,25 (8) mm/U box table 600 x 455 x 455 mm coolant equipment machine lamp mechanical clamping for height adjustment and spindle stock electr. clamping for arm rotation machine and equipment according to the CE-regulations operating manual in GERMAN and ENGLISH BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:https://www.hesse-ma ...
: gebraucht : 2021 : 3966 : prompt, Zwischenverkauf v : Taiwan : 15600 € : 1 : 12480 € : 42 mm : MK 4 : 280 - 1.100 mm : 44 - 1.500 (12) U/min : Stahl: M 25, Guss: M 38 : 1880 mm : 870 mm : 2210 mm : 1800 kg : 470 - 1.270 mm : 0,05 - 0,15 (3) mm/min : 2.2 kW : 260 mm : 280 mm : 1.725 x 715 x 180 mm : 0,75 kW : 635 x 520 x 415 mm : 2530 mm DEMO MACHINE left/right rotation automatic feed drilling depth limit manual headstock adjustment with mechanical clamping electric height adjustment of extension arm and mechanical clamping mechanical clamping of swivel movement of extension arm central operation panel on the front side power load readout for drilling spindle hand wheel for spindle fine feed coolant equipment machine lamp box table machine and equipment according to the CE-regulations operating manual in GERMAN and ENGLISH BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENC ...
Key data: 32 mm, 850 mm
Radial drilling machine Manufacturer: Danube Type DR32 Drilling capacity: Maximum 32 mm in steel. Tool holder: MK 4 (Morse taper). Speed range: Approx. 41 to 1,800 rpm Quill stroke: 190 mm to 200 mm. Projection: Flexibly adjustable from approx. 240 mm to 850 mm Table size: 1,200 x 600 mm Typical functions Tapping device: Integrated automatic for cutting threads (e.g. up to M26 in steel). Feeds: Automatic quill feed in several stages Coolant device: Integrated pump and coolant trough directly on the work table. Machine is in a used condition, clamping Z axis makes noises when driving up and down. Otherwise the machine is ok.
Offer 26215 Technical data: - Drilling capacity 28 mm - Drilling spindle holder MK 3 - Tightening thread M 12 - Drilling spindle speeds - level 1 120 / 215 / 360 / 600 / 1080 rpm - Level 2 240 / 430 / 720 / 1200 / 2150 rpm - Drilling unit height-adjustable by hand crank - Smallest / largest distance table / boring spindle 60 / 390 mm - Drilling spindle stroke 100 mm - Spindle fine stroke adjustment by handwheel - Drilling spindle projection 260 mm - Coordinate table with 3 T-slots 600 x 240 mm - Table travel X-axis 350 mm - Y-axis 160 mm - Drive 400 V / 0.7 / 1.3 kW - Space requirement approx. W 800 x H 1800 x D 900 mm - Weight approx. 300 kg
Drilling Ø: 31.75 mm Spindle holder: MK 3 Speeds stepless. adjustable: 180 - 2100 rpm Projection: 280 mm Table size: 350 x 450 mm Large distance between table and quill: 700 mm Drive motor: 380 V, 0.9/1.3 kW Weight: 270 kg
maximum number of results exceeded
please refine your search
10 € 
