double used for sale

Table Bain Marie RIEBER BM 115 2/1 B, 220 V, 1,55 Kw Auction-ID: A7-45677-62

Double sink with tap and drain set + base Auction-ID: A7-45677-8

257x131 Auction-ID: A3-43367-5761

Pneumatic double piston dosing pump for pumping and mixing 2 media. 1 pneumatic cylinder with 2 pump heads. Required air pressure 8 bar. 1/2-inch connections with 4 stopcocks. Up to approx. 40 strokes per minute, or approx. 80 litres per minute / approx. 5 cbm per hour. On platform wagon ant with 2 swivel/brake castors and 2 fixed castors. Overall pump dimension: 6001300x1000mm, weight about 80kg.

Stainless Steel Double Sink with 2 Drains and Backsplash Auction-ID: A7-45677-56

Pressure total: 140 ton Stroke: 800 mm Daylight: 1.004 mm Free frontal opening L-R: 2.060 mm Table surface area : 2.000 x 520 mm Slide area: 2.040 x 520 mm Working speed: 4 -20 mm / sec Rapid travel: 135 mm / sec Return speed: 120 mm / sec Weight of machine approx.: 14 ton Height over floor approx.: 4.810 mm Oil volume: 700 l

Auction-ID: A3-43515-12138

engine diesel engine Cummins F3.8 - Stage 5 power approx. 114 kW / 154 HP shafts with 9/9 discs with 6 knives per disc (reconditioned) track system with track protection pads hopper with vibro chute Permanent-Over Belt Magnet remote control weight approx. 11 t

Stock number: 3739 CNC LATHE Manufacturer: RIKA, Type: D 8004-2 Machines NO.: 622160, Year of manufacture: 1999 Specifications: Max. circumferential diameter 240 mm dia. Turning length 350 mm Main motor power 5 kw Spindle bore 40 mm dia. C axis - main spindle movement 360 degrees Z ash movement 170 mm Z 2 Axis Movement 782 mm Tool turret 1 with 12 stations Tool turret 2 with 12 stations Sub-spindle Accessories: Hydr. Chuck main spindle mm dia Hydr. Chuck Subspindle mm dia Chip conveyance. Cooling water system. Length: 1600 mm, Height: 2100 mm, Width: 3100 mm, Weight: 2000 kg

Year: 2016 - technically efficient, ready to work - after full service - cutting length: 4000 mm - discs: 500 mm (feed from the rear) - pneumatic inclination of both heads: 90°, 45°, 22.5°, intermediate angles set manually - operator panel with Windows - cooling and lubrication installation for both heads - movable roller feeder - vertical and horizontal pneumatic clamps - automatic disc covers - delivery device for long elements - safety gates

weight of the machine ca.:15 t

Cutting depth:70 mm engine output:12.4 A, 220/380 V , 2 x 6 kW working length:2500 mm dimensions of the machine ca.:3900 x 1100 x 1000 mm weight:1500 kg

WE OFFER AN NICE CONDITION TWO MACHINES EMCO HYPERTURN 665 WITH BARR FEDERS AND TOOLS ACCESSORIESS YEAR: 2005 FULLY FUNCTIONAL , READY TO WORK CONNECTED ON POWER. FOR THE CUSTOMER WE ORGANIZE DISMANTLING LOADING AND TRANSPORT TECHNICAL DATA: Specifications: Max. swing diameter 430 mm dia. Max. rotary. About Bed 600 mm Dia. Turning length 744 mm Distance between spindle lugs 975 mm Main engine power 21/29 kw Main spindle speed range 0-5000 rpm Bore through drawing tube 65 mm dia. C axis - main spindle movement 0.001 degree Y axis 100 +/- 50 mm B Axis Movement Stepless 45 Degree Tool turret 1 with 12 VDI 30 stations Powered stations turret 1 12 pc. - 4000 rpm Y+B pieces. Engine power driven tools 6.7 Kw Tool turret 2 with 12 pc. VDI 30 stations Counter spindle C axis - counter pindel movement 0.001 degree Counter spindle speeds 0-5000 D46485 Pr/mi ...

Code: 0323 Brand: SML - ITALY Model: SILVER P 35/EL - CE Standard Electronic double mitre saw for cutting wood, frames, pvc, aluminium, plastics and various materials - CE Standard Technical data: Oleo-pneumatic head lowering Max cutting length mm 5200 Min cutting length mm 50 Cutting height mm 100 Max cutting width mm 170 Blade diameter mm 350 F30 Motor Hp 3 each - Rpm 3000 Electronic head positioning programmer Bimanual blade lowering control Pneumatic pressures for workpiece clamping N° 2 suction ports diameter mm 60 Working pressure 7 bar Overall dimensions mm 6300 x 1000 x 1600 h Weight kg 1100

pressure:60 t distance between columns:650 mm stroke:220 mm distance table/ram, max. stroke up, adjustment up:410 mm table surface area:600 x 525 mm hole in the table:110 mm table height over floor:900 mm side window:200 mm ram surface:560 x 490 mm power requirement:15,0 kW dimensions (WxDxH):1,9 x 1,3 x 2,7 m foundation pit:not necessary

Gebr. Bayer GB-2680N - Industrial bench grinder with drill grinding device - Drill grinding device - Diamond puller - Cooling water pump - Machine light Specification - Grinding wheel Ø: 210 / 280 mm - Grinding wheel width: 40 mm - Speed: 1450 rpm - Motor power: 1.5 kW - Dimensions WxHxD: approx. 1450 x 1600 x 1300 mm - Weight: approx. 300 kg

pressure:250 t distance between columns:1110 mm stroke:250 mm Distance table/ram, max. stroke up, adjustment up:500 mm Table surface area:1100 x 900 mm Table height above floor:950 mm Side window:690 mm Ram surface:1100 x 900 mm Oil volume:730 l Power capacity:56,0 kW Dimensions (WxDxH):2,3 x 1,55 x 3,96 m

pressure:300 t distance between columns:1800 mm stroke:1000 mm Distance table/ram, max. stroke up, adjustment up:1300 mm Table surface area:1600 x 1200 mm Table height above floor:1080 mm Ram surface:1600 x 1200 mm Weight:24,0 t Dimensions (WxDxH):2,8 x 2,1 x 6,0 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2

1 pc. universal whetstone (20mm wide) 1 pc. whetstone for HSS steel (40mm wide) Grinding wheel diameter 150 mm Grinding wheel width 20 + 40 mm Mounting diameter 12.7 mm Connection voltage 230 V Motor power 0.25 KW Weight 16 kg Dimensions L x W x H 0.37 x 0.2 x 0.24 m Condition: never used / new (5)

Technical data Manufacturer: OTEC Präzisionsfinish GmbH Type: CF 2x50 Year of Make: 2004 Machine No.: 250/04 0147 Power consumption: 5.0 kVA Voltage: 400 V Frequency: 50/60 Hz Pre-fuse: max. 16 A Configuration Type: Vibratory finishing machine with round tank Control: integrated control panel with display Execution: Double container system (2x50) Origin: Made in Germany

Immediately available used fuel double filter

Stock number: 3919 CNC LATHE Manufacturer: MAZAK, Type: HQR 200 MSY Year of manufacture: 2018 Specifications: Max. circumferential diameter 344 mm dia. Turning length 860 mm Main motor power 22 kw Main spindle speed range 5000 rpm Hole through drawing tube 65 mm dia. C Axles 0.001 Both spindles Y axis upper 100mm / lower 70mm mm Tool turret 1 with 12 stations Tool turret 2 with 12 stations Powered tools. 6000 Both Turrets rpm Control Mazak Smooth Fabr. Accessories: Collet device. Heinbuch 65 both spindles Hydr. Chuck main spindle 210 mm dia Hydr. Chuck Subspindle 210 mm dia Driving angle tools 6 pieces Driving Tools Straight 5 pcs. Tool setter Charging Hydrafeed X-Tract Delivery time September 2024 Length: 4000 mm, Height: 2500 mm, Width: 2700 mm, Weight: 12500 kg

Specifications will follow asap

Double pressing/folding/product pressing single or shingle flow Condition: overhauled, serviced, fully functional, ready for use Min. format: spine 180 x width 140 mm, number of pages (45g/m2) tabloid 8, two-fold/broadsheet 4 Format max. spine 450 x width 340 mm, number of pages (45g/m2) tabloid 128, two-fold/broadsheet 64 Mechanical speed max.: 10000 revs/h

With column

Double bench grinder: Grinding grit: 36 and 80 Grinding wheel diameter max. 200 mm Grinding wheel width 32 mm Mounting diameter 30 mm Connection voltage 230 V Motor power 0.9 KW Condition: never used / new (5)

Equipped with: "Lincoln Electric" wire feed type Synergic 7. Double pulse steel aluminum stainless steel

Code: 0370 Brand: HAFFNER - GERMANY Model: DGS 187 - CE Standard Double mitre saw with tilting blades for cutting wood, aluminum, pvc and various materials - CE Standard Technical data: Blades diameter mm 500 F 30 N° 2 motors each Kw 2,2 - Rpm 2800 Cutting length max mm 3400 Cutting length min mm 230 Blades inclination 45° - 90° Electronic positioning cutting length of left cutting unit Hydropneumatic saw feed Pneumatic workpiece clamping Control panel double buttons Electronic head positioning programmer N° 2 suction ports diameter mm 120 Compressed air 6 bar Overall dimensions mm 4600 x 1300 x 1650 h Weight kg 550

MAZAK SUPER QUICK TURN 30MS CNC SUB SPINDLE, 'C' AXIS, DRIVEN TOOLING LATHE WITH MAZATROL T PLUS CONTROL MACHINE IS COMING FROM AEROSPACE COMPANY AND IT IS IN A VERY GOOD WORKING CONDITION Kitagawa B-212 3 Jaw Power Chuck. Maximum Swing Ø560mm. Maximum Swing Over Cross Slide Ø500mm. Maximum Turning Ø413mm. Distance Between Spindles 1,035mm. Main Spindle Bore Ø88mm, Sub Ø61mm. Axis Travel 'X'=244mm, 'Z'=1,035mm, 'B'=1,067mm. Maximum Main & Sub Spindle Speeds 3,000rpm. Maximum Milling Spindle Speed 1,500rpm. 12 Station Turret. (1997)

P427 - used approx. 30 m³ / 30,000 litre HDPE tank, plastic tank, double-walled, flat-bottom tank. Technical details: Content: approx. 30 m³ / 30,000 litres Material: HDPE tank, plastic tank Manufacturer: Formoplast Specific gravity: min. 1.55 kg/L Dimensions: approx. Ø 3.49 m × H total approx. 5.50 m Certification mark: PA-VI 321.103, AHL/ASL listed Other: Used HDPE tank in good condition, inside professionally cleaned, from the outside as shown in the pictures. Above-ground storage tank for outdoor installation, standing on flat floor, double-walled with outer tub, dome on top of the roof, several inlets and outlets, opaque, incl. railing on top of the roof. Only the pure tank is sold, without add-on parts such as pipes, fittings and accessories. If the ladder fits on the truck, it can be supplied. This container can be used as a storage tank for many different media ...

Lenght 5m Options: Load&unload VIRTUAL AXIS FOR CUTTING UNITS INCLINATION PROFILE CLAMPING LABEL PRINTER

Workshop overhauled 2024, ready-to-use DISKUS Doppelplan grinding machine, Lower grinding spindle renewed 2024 Machine No. 7078 Specifications: Grinding spindle 2 pieces vertical Workpiece width 5 - 30 mm Max. workpiece height 10 mm Grinding wheel diameter 300 mm Dimensions of grinding tools Ø 300 x 50 x Ø 75 mm Rotational speed grinding wheel 18 m/s Speed 1150 rpm Lower grinding spindle frequency-controlled Machine weight approx. 2.3 t Accessories: IONIC process control, FAUDI water basin with magnetic separator Replacement flanges, transport washers The machine can be viewed by appointment in our factory in Krefeld. Price ACTUAL condition from stock: on request – Errors, changes and prior sale excepted –

Inv. Num. : 8024 Type: CP 1216 Producer: Champion Created: 2017 Parameters: Vacuum belt width: 1600 mm Type of shaft generated: E. B. C. mm

Key data: 63 mm, 1300

Twin screw extruder, conical Manufacturer: Reifenhäuser Type: BT 1000-2-63 K Year of Make: 1994 Machine No.: 32061 Working hours: 32,303 h Screw geometry: conical for PVC-hard profiles Screw diameter: 63 – 121 mm Screw length: 1300 mm Screw speed: max. approx. 32 1/min. Nominal torque of the gearbox: 1000 daNm Dynamic load rating of the return pressure bearing: 103600 daN Engine power: 43.0 kW, Drive motor: Baumüller DC motor Cylinder heating/cooling zones: 4/3 (air cooling with fan) Adapter heating zones: 1 Tool Heating Zones: 5 Temperature control: digital temperature controller (2 x PSG Multipact 88) Max. permissible mass pressure: 500 bar Output capacity: approx. 150 - 200 kg/h for PVC-hard profiles Accessories: Dosing device and material hopper Extrusion height: 1150 mm Dimensions: 4250 x 1200 x 1750 mm without hopper (LxWxH) Weight: approx. 3000 kg Cond ...

2 machines one 2003 and 2006 Pakert price 39,900 Circumferential diameter 320 mm Chuck diameter 203 mm Machining diameter 260 - 320 mm Machining length 180 - 530 mm Rod diameter 51 mm Spindle bore 61 mm Spindle speed 35 - 5,000 rpm Number of shots in the turret head 12 x 2 Control MATRIX 2 Travel - x 240 mm Travel - y 100 [+/-50] mm Travel - z1 440 mm Travel - z2 495 mm CNC Turning and Milling Center | MAZAK - MULTIPLEX 6200 IIY equipped with gantry loader

Key data: 550 mm

Five Axis CNC Controlled Dual Head Double Miter Circular Sawing Machine with Loading and Unloading Device Maximum section length with two saw heads at the same time - 6,000 mm Maximum saw blade diameter Ø 550 mm Infinitely programmable mitre angle adjustment - 15° / 90° / + 45° Saw blade drive power 2 x 2.64 kW Dimensions approx. 11.3 m x 2 m x H 2 m (with closed safety doors)

Engine: diesel engine Cummins F3.8 - Stage 5 Power: approx. 114 kW / 154 hp Shafts: 7/7 discs with 8 knives per discs & breaker bar with combs Version: track system with hopper with vibro chute Permanent - OVERBAND Magnet remote control Weight: approx. 11 t

Key data: 30 t

Hydraulic press can be used in a variety of ways as an assembly press, small series press, manual insert press or heating press in double-column presses Design (H-press) A tour of the press is possible at the Ennepetal camp. It is a 2.5-year-old, unused press with no operating hours, which is sold with a full warranty. List price: 45,000 Technical details: Robust machine frame Capacity: 30 tons – at 300 bar Pump ASC: 28.5 liters/min. Engine: 11 kW – 15 hp Oil tank: 600 × 450 × 500 mm – with approx. 100 litres Cylinder piston: Ø 110 mm Cylinder inside: Ø 70 mm Stroke: 500 mm Fast forward: 45 mm/s Return: 55 mm/s Guides: Ø 50 mm Table top: 800 × 550 mm – with T-slots Plunger plate: 700 × 500 mm – with T-slots Total weight: 2000 kg Valves from BoschRexroth Control cabinet technology from renowned manufacturers Press table size 700 × 500 × 7 ...

Max. saw length: 5000 mm Max. saw blade diameter: 450 mm Automatic positioning of length and angle (90° or 45°) Moving roller conveyor Material support Minimum quantity spraying device

faceplate diameter: 3100 mm swing diameter: 3600 mm turning height: 3600 mm control: Fagor 8035 table load: 35 t turning speeds: 0,32 - 40 U/min max. ram stroke: 3000 mm table load: 35 t turning speeds: 0,32-40 U/min total power requirement: 70 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 1645 t stroke: 1000 mm dayligth: 3000 mm Control: down speed: 280 mm/sec return speed: 275/346 mm/sec distance between columns: 2520 mm total power requirement: kW weight of the machine ca.: t the machine is in very good condition optional you can buy a shifting table as well The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

for production of forgings by forging of ferrous, non-ferrous metals and alloys in the hammer dies model M212 Impact energy, 50 kJ Nominal weight of falling parts, kg 2000 Stroke woman, mm 1200 Stroke woman, mm 1200 Machine dimensions Length Width Height (mm) 3650X1660X5310 Weight kg 58.310, spare parts available

pressure: 200 t stroke: 150 mm table surface area: 850x650 mm ram surface: 730x560 mm weight of the machine ca.: 8 t dimensions of the machine ca.: BxTxH 2000x2500x3600mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 25 t distance between columns: 580 mm stroke: 150 mm dayligth: 370 mm table surface area: 560x400 mm ram surface: 400x350 mm hole in the table: 80 mm weight of the machine ca.: 2,5 t dimensions of the machine ca.: 1500x500x2500 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 200 t distance between columns: 500 mm stroke: 150 mm ram surface: 320 mm table surface area: 470x400 mm weight of the machine ca.: 12 t dimensions of the machine ca.: 2000x2000x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 160 t distance between columns: 850 mm stroke: 400 mm ram surface: 800x700 mm : 300 mm pressure of ejector: 20 t table surface area: 800x700 mm total power requirement: kW weight of the machine ca.: 12 t dimensions of the machine ca.: 1800x1800x4200 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 360 t stroke: 60 mm table surface area: 525x430 mm no. of strokes: 60 Hub/min : 40 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Double switching element, 1-stage DEMAG CBD1 87466744 500 V 20 A New ! Dimensions: 65 x 65 x 65 mm