We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
122,001 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Maffel Erika DGA 900 Double miter stop G&MAFELL-038560
used
Double turbo pulping/refining machine by MANZINI Model: TEF20.E Year: 2000 Overall dimensions: length 2,900mm, width 1,700mm, height 2,400mm
used
I sell a double end cutting and milling machine FRIULMAC IDRAMAT, built in 2007. Working width up to 2500mm Configuration left side / fix: 1 + 1 pcs. cutting units top + bottom / 3.0 + 3.0 KW 1 + 1 pcs. groove saw units front + rear with jump Configuration right side / movable: 1 + 1 pcs. cutting units top + bottom / 3.0 + 3.0 KW 1 pcs. special milling unit on top / 5.5 KW Material pressure band with support from above. Special design, also suitable for side dimensioning. Continuous machine. Siemens Simantic control panel. Condition Very good. Available the same.
used
I sell a double end profiler milling machine CELASCHI TSA 280D. Working width up to 2800mm Configuration left side / fix: 1 pcs. cutting unit 4.0 KW 1 + 1 pcs. milling units top + bottom / 4.0 + 4.0 KW 1 + 1 pcs. side milling units 4.9 + 4.9 KW Configuration right side / movable: 1 pcs. cutting unit 4.0 KW 1 + 1 pcs. milling units top + bottom / 4.0 + 4.0 KW 1 + 1 pcs. side milling units 4.9 + 4.9 KW Material pressure band with support from above. Continuous machine. Combined power 47KW NA1200 Positioner. Condition Very good. Available the same.
used
Used double shaft kneader KÖNIG, type: W160 -In bakery condition- - for 160 kg dough - including 1 tank car - other tank wagons on request Visits and test runs are possible by arrangement.
used
I sell a continuous double mitre saw with scoring OMGA TI2500 Super, year of construction 2003. Motor 5kW on each side for both main saw and scorer. Working width max. 1200mm Cutting depth (slot length) 2500mm Underpressure for this and light elements 1 pc. on each side. Self pump. Material pressures top 1 pc. on each side. Available same. Fully operational. All errors fixed.
used
Double-sided grinding and polishing block MEYER type SMP Masch. No. 848 Year of construction 1963 Shaft diameter 50 mm Grinding wheel holder 305 mm Wheel spacing 1470 mm Grinding and polishing wheel diameter max. 800 mm Working height 550 mm Speed 710 / 800 / 950 rpm. Drive power 2x 3 kW mains connection 380 Volt, 50 Hz. - two drive motors for each working side separately- star-delta switch for each drive motor separately - speed change over flipping the drive belt - dust extraction flange 100 mm- mounted are 2 pieces corundum grinding wheels with 40 mm width, approx. 560 / 480 mm space requirement L x W x H 1700 x 1200 x 900 mm Weight 850 kg good condition; used
used
Thank you for your interest in our used machines, which we can offer you as follows: Model: Double Z kneader with hand tilt Trog dimensions: 350x365x280mm (lxwxh) Net capacity: approx. 35 l total Electrical: 400V 3 ph Dimensions: 1200x800x1650mm (l/w/h) Weight: approx. 350 kg Details: Hand tilting, parts made of stainless steel in contact with the product We offer this machine for sale "as is" to the exclusion of any warranty/claims for defects or representations. ex stock Hess. Lichtenau; Unpacked
used
Double disc grinding machine
used
Key data: 50
Extruder 2 corrotating spindles: 50 mm Ø, 40 L/D, brand: ICMA SAN Giorgio, with double degasser. Motor: 57.5 Kw direct current with drive. Material dispenser and thread head (spaghetti), with electrical panel.
used
Double-sided tenoning machine Helma DRP 2000 Spindle rotation speed 6400 rpm Max blank length 2000 mm Feed speed 2 m/min Power 7 kW Weight 2750 kg Overall dimentions 4000x2000x2000 mm
used
SECOND-HAND DOUBLE SIDED ROUND END TENONER BALESTRINI MOD. PRO 15 CNC - CE RULES - Working length mm. 170 – 2000 mm - Max tenon length 80 mm - Production: 1800 tenons/hour (900-1350 pieces/hour) - Tool rotation 11,000 rpm - Tenoning units motors (n.2) 8 hp (4hp each) - With loader RBF 2 -Volt. 380/50 - S/N AO.118.88 - Year 2002
used
SECOND-HAND CNC DOUBLE SIDED ROUND END TENONER BACCI TSD-E-NC14 - Working length mm. 1200 - Max tenon length 100 mm - Production: 2400 tenons/hour (1200 pieces/hour) - Tool rotation 9,000 rpm - Tenoning units motors (n.2) 8 hp (4hp each) - Touch screen NC control - With CSF loader - Safety net - S/N 800 - CE rules (year 2004)
used
Double end tenoner Schwabedissen Type: DAa 200 Working width 1000 mm 3 motors per side: Saw 8.3 kW swivel Milling machine 4.5 kW swivel Milling machine 4.5 kW swivel Chain track with cam spacing 380 mm Lower chain projection 500 mm External dimensions 3600 mm x 2340 mm
used
Stock No. 2680 1x partially overhauled and functionally tested Compounding extruder double screw, co-rotating intermeshing Segmented screws and cylinder barrel (water cooled) Screws 2x 64 mm - 40 L/D Screw speed up to 1200 rpm-1 Drive 482 kW-DC Gearbox Flender safety coupling atutomatik 3x degassing venting ports ( vacuum pump optional for extra charge ) 2x side feeding dosing extruder type ZSFE 50 twin screws with dm 48.5 mm with 4 kW each, speed up to 800 rpm.-1 Control cabinet with Siemens HMI Touch OPTIONAL at extra cost: 1) Screen-pack-changer changer 2) Vacuum pump 3) Pelletizing: ST strand, - WRG waterring or - UWP underwater pelletizing system 4) Granulate classifying sieve 5) gravimetric loss-in-weight blender / dosing system 6) Material conveying 7) Big-bag filling station 8) Start-up by our technicians Visit to our factory in Wuppertal. ...
used
Wegoma 350 Double miter saws - Writing saws Type: 350 Year of construction: Motor: 2 2.2 kW (3 PK) Saw: ø330 mm Speed: 2800rpm Length: 3,500 mm Panning: 0 - 45° Inclination: 0 - 45° Werkst. Fixation: Pneum. Clamping Semi-automatic pneumatic saw movement Condition: Functionally tested
used
6000 l container made of V2A double jacket for sale from location Very good condition, straight from production!
used
000 l container made of aluminium double jacket For sale from location With agitator Very good condition, straight from production!
used
Multivac Vacuum double chamber with built-in vacuum pump
new
Here are the technical data of the offered machine: Technical data + information: • No-load speed up to 40 mm/sec • Opening speed up to 40 mm/sec • Starting press speed 5–15 mm/sec • Table size/heating plate size 600 × 600 mm • Plunger size/heating plate size 600 × 600 mm • 2 heating plates, electrically heated, up to 250 degrees – as OPTION • Total size approx. 2000 × 1000 × 2800 mm height • OIL temperature monitoring • Automatic lubrication • Free positioning of the plunger • SICK/LEUTZE light barriers 14.1 mm on the front • Circulating oil cooling • Pressure holding valve 0 to 1800 sec. • Rear monitored door • Pressure adjustment from 30 T to 120 T • Travel limitation either by pressure or position • Programming set-up mode, single stroke (adjustable via rotary switch) • Control panel permanently installed in the wall ...
used
Double cross-cut saws Hüllhorst Year of construction: 1999 Cutting length 3000mm Cutting width 3000mm Scoring on each side Scoring is pneumatically evasive Saw blade diameter max. 400mm Saw blades are not swivelling The width of sawing units can be adjusted by motorisation
used
Double Screw Extruder, good codition
used
Double mitre saw Omga for glazing beads Ready for pickup, price EXW The machine is in good condition, operational. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone: 0041 62 966 18 32 Fax 0041 62 966 21 12
used
Double-pass steel chimney, height 32.0 m, weight 8,400 kg, diameter D=1,200 mm
used
Double-end tenoner Gabbiani TDA N64 (Ref. No. 509-2642) 380 V 50 Hz 92 A 49 kW Weight approx. 5500 kg Year of construction: 1979 L x W x H: 4000 x 5500 x 1700 mm The machine is in good condition, ready for operation Subject to changes, errors and prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone: 0041 62 966 18 32 Fax 0041 62 966 21 12
used
Double mitre saw Hoffmann type MS 35 Specifications: Cutting width (mm): 85 Cutting height (mm): 85 Motor (kW): 2 x 2,2 Horizontal clamp: 1 set Material supports: 1 set
used
Double mitre saw STRIFFLER-STRIMA 2750 Year of construction: 1992 S/N 289 Manufacturer: Striffler GmbH Germany Cutting width 2,200 mm Cutting height at 45° 240 mm 2 saw motors 1.1 kW, 2800RPM / 380 V 50 Hz Saw blade 250mm Rear-cutting design Width adjustment by electromotive Saw feed pneumatic Length adjustment by handwheel Pneumatic clamping device Length 2940 mm Width 1,100 mm Height 1,220 mm Weight approx. 360 kg
used
This Cincinnati extruder is in machine storage at Plastima Used Machinery. The machine is from 1999. Special note: the extruder lacks the gearbox. – Brand: Cincinnati – Model: Titan 58R-APC – Construction year: 1999 – Conical double screw extruder – Screw Ø: 58 mm – Working hours: 3.337
used
OMS double miter saw SALVARANI model OK 350 SUPER: - useful opening 3500mm - adjustable blades D=350mm - machine according to CE standards
used
Compounding - granulation line, consisting of: Extruder twin screw synchronization, drive 31 kW Segment screws and barrels, water-cooled Screws 2x Ø 35 mm – 44 L/D 1x degassing zone (atmospheric) 1x degassing zone (vacuum) 1x side dosage Screen changer double piston type K-SWE 101 with hydraulics Switchboard Water bath, granulator, etc. optionally also available on request.
used
Semi-automatic double wheel winder suitable for Rohrer 16-32 mm OD Manufacturer: SAREM Type: SRM32-011 -Winding core diameter: 230 mm – 700 mm -Winding width: 80 mm – 700 mm -Winding speed: up to 50 m/min -Max. winding outer diameter: 1,200 mm Year of construction: 2022 unused
used
Powerful double mitre saw, ideal for mass cuts of plastic and aluminium profiles at 90° or 45°. Saw blade diameter 550 mm, 4,500 mm length, and 1-axis control E 590/1. Proven elumatec principle of "sawing from below" for optimum accessibility and the best possible use of the saw blade. - Minimized calculation effort thanks to external dimension cut. - Pneumatic angle positioning 90° or 45". - Protective shields with automatic lowering over the sawing areas. - Standard with suction nozzle at the top and bottom. - Steel machine bed in post-and-beam construction. PC control E 590/1: - Industrial PC 1-axis control E590/1 for the cutting length (X-axis) - Drive-independent absolute measuring system - Pneumatic locking in position - Robust, low-wear direct drive of the mobile sawing unit - Ergonomic arrangement of the control unit - Positioning accuracy +/-0.1 mm pe ...
used
Frequency converter, frequency converter, drive converter, controller, variable speed drive -Manufacturer: Siemens, Sinamics Double Motor Module -Type: 6SL3120-2TE13-0AAO -Input: DC 600V -Output: 3AC 400V 3A/3A -Number: 1 piece available -Dimensions: 500/50/H270 mm -Weight: 5.5kg
used
Pneumatic double diaphragm pump -Fast venting and immediate suction of the medium -Dry running without damage -Hermetically sealed for moisture-sensitive liquids -Excellent for abrasive liquids with low to medium viscosity and materials sensitive to shear forces -Max. Pressure: 6 bar -Connection: 1 inch -Output: 114 l/m -Max. Pressure: 18 bar -Dimensions: 360/270/H330 mm -Weight: 26 kg
used
Double linear guide carriage STAR 2x Linear guide carriage: 1651-21x-10 Clamping plate: 305 x 109 x 19 mm groove width: 8 / 15 mm Groove depth: 12 mm bores: 8x Ø 15 mm, 8x 9 mm bore under linear guide carriage: Ø 22 mm suitable linear guide rail see AT113 and AT114 ! used, tested ! Dimensions: 310 x 110 x 90 mm
used
Double switching element, 1-stage DEMAG CBD1 87466744 500 V 20 A New ! Dimensions: 65 x 65 x 65 mm
used
Relay socket, double, 2 pieces ELEKTRO-APPARATE-WERKE BERLIN-TREPTOW RELOG-System Type series: 2RHxx / 4RHxx PL - No.: 739197000 250 V AC/DC 5 A TGL 26048 Price for 2 pieces ! New ! Dimensions(single socket, without soldering lugs): 80 x 58 x 16 mm
used
Double variable transformer, toroidal transformer SCHÜTTERMANN 2 x RV 230/B ( 2xRV230/B ) Baugr. G260 IP00 2 x 8 A Prim. 2 x 230 V sec. 2 x 0 - 230 V 50 - 400 Hz control transformer for 2 x LU29 ! Dimensions: 340 x 190 x 190 mm
used
Double-deck terminal, straight-through/through-terminal, 50 pieces WAGO TOPJOB® S 2000-2201 Cable cross-section: 1 mm² Nominal voltage: 500 V amperage: 13,5 A Mounting type: DIN rail 35 Insulating body material: Polyamide 6.6 New ! dimensions (single terminal): 69.7 x 3.5 x 51.7 mm Dimensions ( packaging ): 270 x 100 x 80 mm
used
Grip collection bracket with double flange plug, 70 pieces OBO BETTERMANN 2031 DF 8 Article number: 2205 378 Number of lines: 8 ( NYM 3 x 1.5 ) Material: Poloypropylene (PP), light grey (RAL 7035) New dimensions ( grip collection bracket ): 47 x 45 x 23 mm Dimensions ( packaging ): 300 x 200 x 200 mm
used
Double hydraulic pump with motor BONDIOLI & PAVESI HPLPB351DW2G7G6BCM Motor: 11 kW 400 / 690 V IP55 Dimensions: 900 x 380 x 350 mm
used
Double hydraulic pump with motor ORSTA 1,62U 120 ( 1,62U120 ) TGL 37069 12,5 16/1 TGL 10885 Engine: 3 kW 220 / 380 V IP54 Dimensions: 860 x 310 x 300 mm
used
Double hydraulic pump with motor ORSTA A6,3 R ( A6,3R ) C16 - 2R ( C16-2R ) TGL 10859 Motor: 1,5 kW 220 / 380 V IP44 used, tested ! Dimensions: 590 x 250 x 240 mm
used
Double hydraulic pump, hydraulic pump ORSTA 6.3/20.1-230 + 1.6/20.0-260 ( 6.3/20.1-230+1.6/20.0-260 ) TGL 37069 Flange: 112 x 110 mm New ! Dimensions: 250 x 105 x 115 mm
used
Double hydraulic pump, hydraulic pump ORSTA 4/20,0-260 + 4/20,2-230 ( 4/20,0-260+4/20,2-230 ) TGL 37069 Flange: 112 x 110 mm New ! Dimensions: 250 x 105 x 115 mm
used
Double hydraulic pump with motor ORSTA pump1: 12,5/16-1 TGL 10885 Gate valve pump, single-flow pump2: A2,5 L TGL 10859 Zahnradpumpe Engine: VEM KMR 112 M6A SGR 3 kW 950 rpm 220 / 380 V IP44 used, tested ! Dimensions: 840 x 350 x 350 mm
used
Double hook - depth caliper, depth gauge PAGUS 0 - 300 mm pitch: 0.1 mm beam length: 94 mm New ! Dimensions: 377 x 94 x 10 mm
used
Double hydraulic pump with motor REXROTH 1PV2V4-23/80RE01MC63A1 1PF2G240/004RR20MR vane pump 1PV2V4-23 pmax.: 160 bar Vmax.: 82,8 cm3/U Gear pump 1PF2G240 pmax.: 250 bar Vmax.: 4.0 cm3/U engine: BBC QU160M4AG 11 kW 1460 rpm 380 / 660 V IP44 used, tested ! Dimensions: 1100 x 440 x 500 mm
used
Double hook - depth caliper, depth gauge PAGUS 0 - 300 mm pitch: 0.05 mm beam length: 98 mm New ! Dimensions: 380 x 98 x 10 mm
used
Double piston cylinder MARPOSS 3613243300 stroke: 100 mm rod diameter: 2x Ø 12 mm New ! Dimensions: 185 x 70 x 35 mm